Regarding BI& buisness content.

Hi guys,
can any body give me the info regarding the technical difference between the BI3.5 AND BI7.0 buisness content ..

Hi Niyati,
Check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Bye
Dinesh

Similar Messages

HOW TO COPY BUISNESS CONTENT SOME CHARACTERSTICS AND KEY FIGURE I WANT

HOW TO COPY BUISNESS CONTENT SOME CHARACTERSTICS AND KEY FIGURE I WANT TO LOAD MY INFOCUBE PLEASE GIVE DETAILS SCREENSHOTS

HI,
Go through this url
[http://help.sap.com/saphelp_nw70/helpdata/EN/80/1a66d5e07211d2acb80000e829fbfe/content.htm]
Regards,
Rajkandula

Regarding to the Contention Window (CW), Help please.

Regarding to the Contention Window (CW).
as we know that the wireless client who wants to send data to the access point must generate a back-off time between 0 and CWmin and and waits until the RF channel is free for an interval called DIFS.
now who gives the CWmin to the client? (i think the AP, right?)
if the client's CWmin is given by the access point, how the AP gives it to the client ?
please tell me, i really could not find any explaination on the internet.
thank you
naoufl

do you have any idea how the AP gives the CWmin/max to the client? is it via the bacon frame?
please provide me with any documentation that explains how the AP assigns the CWmin/max to the client. because i need a refrence in this matter in my MSc dissertation.
thank you very much
Naoufl

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT

WHAT IS THE USE OF COPY/MATCH OPTION IN BUISNESS CONTENT GIVE DETAILS

Hi,
Match (X) or Copy
If the SAP delivery version and the active version can be matched, a checkbox is displayed in this column.
With the most important object types, the active version and the SAP delivery version can be matched.
From a technical point of view, the SAP delivery version (D version) is matched with the M version. As in most cases the M version is identical to the active version (A version) in a customer system, this is referred to as a match between the D and A versions for reasons of simplification.
When a match is performed, particular properties of the object are compared in the A version and the D version. First it has to be decided whether these properties can be matched automatically or whether this has to be done manually. A match can be performed automatically for properties if you can be sure that the object is to be used in the same way as before it was transferred from Business Content. When performing matches manually you have to decide whether the characteristics of a property from the active version are to be retained, or whether the characteristics are to be transferred from the delivery version.
Example of an automatic match
Additional customer-specific attributes have been added to an InfoObject in the A version. In the D version, two additional attributes have been delivered by SAP that do not contain the customer-specific attributes. In order to be able to use the additional attributes, the delivery version has to be installed from Business Content again. At the same time, the customer-specific attributes are to be retained. In this case, you have to set the indicator (X) in the checkbox. After installing the Business Content, the additional attributes are available and the customer-specific enhancements have been retained automatically. However, if you have not checked the match field, the customer-specific enhancements in the A version are lost.
Example of a manual match
An InfoObject has a different text in the A version than in the D version. In this case the two versions have to be matched manually. When Business Content is installed, a details screen appears which asks you to specify whether the text should be transferred from the active version or from the D version.
The Match indicator is set as default in order to prevent the customer version being unintentionally overwritten. If the Content of the SAP delivery version is to be matched to the active version, you have to set the Install indicator separately.
The active version is overwritten with the delivery version if
¡        the match indicator is not set and
¡        the install indicator is set.
In other words, the delivery version is copied to the active version.
If the Install indicator is not set, the object is not copied or matched. In this case, the Match indicator has no effect.
In the context menu, two options are available:
                            a.      Merge All Below
The object in the selected hierarchy level and all objects in the lower levels of the hierarchy are selected as to Match.
                            b.      Copy All Below
The Match indicators are removed for the object in the selected hierarchy level and all objects in the lower levels of the hierarchy. If the Install indicator is also set, these objects are copied from the delivery version to the active version.
The most important properties which are taken into account when versions are matched are now listed.
When referring to InfoObjects it is important to differentiate between:
§         Characteristics
§         Time characteristics
§         Key figures and
§         Units
Valid for All InfoObjects Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        Texts
·        Description
If texts/descriptions in the delivery version do not yet exist in the active version, they are transferred.
·        Attribute only (flag)
·        Short and long text (description)
·        Time dependency of attributes
·        Transfer routine
Valid for Characteristics
Properties Matched Automatically:
Properties Matched Manually:
·        Compounding
New InfoObjects are included in compounding
·        Referenced characteristic
Reference characteristics are transferred automatically. A warning is issued.
·        Attributes / navigation attributes
New attributes are included.
If an attribute is added by the customer, the settings for this attribute are transferred (for example, F4 sequence).
·        Application components
If the entry for the active version is initial, the delivery version is used.
·        BEx display
·        Characteristic constants
·        Default member
·        Authorizations (flag and field)
·        Selection (CHASEL)
·        InfoObject is document attribute
·        Data type
·        Length
·        Output length
·        Conversion routines
·        Lower case allowed (flag)
·        Contains master data (flag)
·        Master data is authorization relevant (flag)
·        Export DataSource (Flag)
·        F4 query design
·        F4 query runtime
·        Check ODS object
·        Contains text tables (flag)
·        Texts are language-dependent (flag)
·        Short, medium and long texts exist (each with flag)
·        Default currency
·        GIS attribute
·        Hierarchies exist (flag)
Valid for Key Figures
Properties Matched Automatically:
Properties Matched Manually:
·        Type of key figure
·        Fixed unit
·        Fixed currency
·        Aggregation
·        Exception aggregation
Valid for Units
Properties Matched Automatically:
Properties Matched Manually:
·        See the table above (Valid for Characteristics), if these properties are also relevant for the units.
When referring to InfoProviders it is important to differentiate between:
¡        MultiProviders
¡        InfoCubes
¡        ODS Objects and
¡        InfoObjects
InfoObjects are discussed above (see the first table Valid for All Objects Named Above).
Valid for All InfoProviders Named Above:
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoObjects
If InfoObjects in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for MultiProviders
Properties Matched Automatically:
Properties Matched Manually:
·        New InfoProviders
If InfoProviders in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
Valid for InfoCubes
Properties Matched Automatically:
Properties Matched Manually:
·        New dimensions
If dimensions in the delivery version do not yet exist in the active version, they are transferred.
·        Manual matching is not necessary.
With the InfoObject catalog object type, InfoObjects that are assigned to a catalog in the delivery version are transferred to the active version automatically. Manual matching is not necessary.
With the transfer rule object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional attributes) are added automatically when the match is performed. Manual matching is not necessary.
With the process chain object type, those objects that exist in the delivery version but are not yet contained in the active version (for example, additional objects in the process chain) are added automatically when the match is performed. Manual matching is not necessary.
·        Active Version Available
In this column, the following display options are available:
¡        : The object is available in an active version. You decide whether you want to retain this version or reinstall the latest version of the object.
¡        Date symbol: The object is already available in an active version. However, the active version belongs to an older Content release. SAP recommends that you install the latest version.
¡        Gray symbol: An activated version of the object is available in the system. However, the object status is inactive. If an object version is activated, this indicates that all metadata for the object can be created successfully. The inactive object status indicates that the processed object is inconsistent and cannot currently be used for processing data. Transfer the object again from the SAP delivery version (D version). If this is not enough to change the object status from inactive to active the object has to be postprocessed. You find notes on postprocessing in the activation log.
Postprocessing: An inactive object status may also occur for an InfoObject if changes are made to the structure at field level. Postprocessing the object involves converting the relevant tables in accordance with the activation log.
¡        No indicator: The object is not available in an active version.
7. Make Settings in the Selection List and Install.
Make the required settings in the Install selection list:
Installation Type
Installation Type
Information
Simulate installation
The system runs a test to see whether any errors are likely to occur during the installation. However, not all errors that may occur can be identified during simulation: Some error messages can only be generated when a real A version (and not just a simulation) is available in the system. You should, therefore, only use the simulation function as a rough guide to help you identify and remove basic errors.
Install
The selected objects are installed immediately.
Install in background
The selected objects are installed in the background.
Install and transport
The selected objects are installed immediately and then written to a transport request.
SAP recommends you use the Install in background option because installing a large number of objects can take a long time. Modifying objects that are already active can take an especially long time to complete. Make sure that when you install objects in the background that the versions are not matched. It is always the delivery versions that are installed. These are not matched with any available customer versions.
Refer
Business Content (Versions)
http://help.sap.com/saphelp_nw04/helpdata/en/c1/ea683cc5e8ca68e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm
Thanks,
JituK

Activating Buisness Content

Hi
How to activate buisness content in SAP-HR / BW context. ?

Hi
AWB --> Business Content --> Object types
frame set the grouping to "Only necessary objects"
In "Info sources" "Select objects"
Check for "0FI_GL_1" and clicked on "Transfer Datasource"
And then choose "Install" from the right most frame
Repeat the above steps for the all (Infocube, ODS, update rule, transfer rule)
All this i think somebody answer already in BW forum pls check that.

Buisness Content?

hi all,
If we activate the Infocube from Buisness Content like 0PUR_C01 or 0SD_C05 etc. Is there any nesccesary to activate or extract respective Datasource like 2LIS_11_VAHDR etc from R/3 side.Because these infocube are dependent on r/3 datasource.Correct me if I am wrong.
Thank you,
VJ

Hi,
1) Activate the required DS in Source system(Transactional DS And Master DS)
2) Replicate the DS from sourcesystem to BW.
3) In the activation of Infocube select 'data flow before' or 'dataflow after and beofre'.
Then if you see the 'show data flow' from context menu of data target , you can findout the transfer rules, datasources, PSA and source system .
If you do activation without 1 and 2 steps , you will find only infocube, update rule and communication structure. Then you have to assign datasource to infosource manuaaly.
With rgds,
Anil Kumar Sharma .P

What is buisness content?

Hi All,
I want some good material on buisness content.Giving knowledge from base.
Also i want to know how to install buisness content into the 3.5 system.
I had seen sap help,but it was not of much help.

Hi,
Also check
http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm
Eddy
PS. Reward useful answers and earn points yourself

Querry regarding Downloading SNC content in XI 7.0

My scenario is ECC6.0->XI 7.0->SNC 7.0
I Have downloaded SNC 7.0 (XI CONTENT SCM) content, But i am bit confused because of to option available at Service marketplace for SNC content: (complete path:service.sap.com->Support Packages and Patches - >Entry by Application Group" SAP Content" ESR Content (XI Content)"->XI CONTENT SCM->SNC 7.0)
1. XI CONTENT ESM SNC
2. XI CONTENT SCM
1. Please suggest which content should i download or the content i have downloaded is correct.
2. What is meant by ESM.
- Rashmi

Hello Rashmi
See the link below:
Defining Process Component Architecture Models in ES Repository
http://help.sap.com/saphelp_nwpi71/helpdata/EN/e5/9ad967721045cb8cb038fb61267e2e/content.htm
Regards
Mark

Doubt regarding sender file content conversion

Hi Experts
This is my source XML structure, how to define Sender file adapter (Content Conversion) and filed lenths: COMMIT_I 1, STUDENT 12, ID_TYPE 6, ID_NUMBER 60, VALID_FROM 8,VALID_TO 8
<?xml version="1.0" encoding="UTF-8"?>
<ns0:IDENTIFICATION_ADD_Req_MT xmlns:ns0="urn:passhe.com/UpdateIdNumberISA32">
   <COMMIT_I>X</COMMIT_I>
   <IDENTIFICATION>
      <STUDENT>Student</STUDENT>
      <ID_TYPE>New</ID_TYPE>
      <ID_NUMBER>12345</ID_NUMBER>
      <VALID_FROM>12/03/2008</VALID_FROM>
      <VALID_TO>13/04/2008</VALID_TO>
   </IDENTIFICATION>
</ns0:IDENTIFICATION_ADD_Req_MT>
Please suggest me how to configure Sender file content conversion
Thanks
Dhanush.

hi sekhar,
Just go through this blogs & links.
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2
/people/venkat.donela/blog/2005/06/08/how-to-send-a-flat-file-with-various-field-lengths-and-variable-substructures-to-xi-30
/people/anish.abraham2/blog/2005/06/08/content-conversion-patternrandom-content-in-input-file
/people/shabarish.vijayakumar/blog/2005/08/17/nab-the-tab-file-adapter
/people/jeyakumar.muthu2/blog/2005/11/29/file-content-conversion-for-unequal-number-of-columns
/people/shabarish.vijayakumar/blog/2006/02/27/content-conversion-the-key-field-problem
/people/michal.krawczyk2/blog/2004/12/15/how-to-send-a-flat-file-with-fixed-lengths-to-xi-30-using-a-central-file-adapter
/people/arpit.seth/blog/2005/06/02/file-receiver-with-content-conversion
http://help.sap.com/saphelp_nw04/helpdata/en/d2/bab440c97f3716e10000000a155106/content.htm
reward points if found helpfull
regards
chandra.k

List of Queries available in the Buisness Content ?

Hi Leaders,
As our customer want to get the consolidate daily load status.As if now we are now doing manually by going into each IP and taking the record count,Run time,
Now i want to know is there any Query(BI Content) or Programs which will give us the record count and runtime.
I am in BI7 system.
Kindly give me your valuable input on this...
Thanks & regards..
Gowri...

If you are loading data through process chains, why not add an option to send email after successful execution? You can as many email as you want to send successful/fasilure notification.
Here is the steps:
1 Go To RSPC Transaction
2 Select your process chain
3 Right click on the process and choose create message a window popsup.
4 Choose the message you want like either success or errors
5 In the next screen create the process variant.
6 In the process maintance: send message screen select maintain recipient list
7 Enter recipient and recipient type
8 Come back to send message screen and save it ( You don't have option in the previous screen to save)
9. Do this for all the processes and save it and schedule for testing.
Hope this helps..

Regarding Job Log Content.

Hi all,
I want to sent the content of the job log through mail for the failed jobs.
Can anybody tell me how to get the content of the joblog in an internal table?
I am able to check the status of the job from the table TBTCO.But unable to
find how the joblog information is being fetched??
Please help me out with this.
Thanks and Regards.
syed.

syed,
you can use the FM 'BP_JOBLOG_READ' passing the client, jobcount, joblogid and jobname. The jobcount and joblogid can be obtained from the TBTCO table for the date/time of the job execution.
the log content is then returned back in the tables parameter 'joblogtbl'.
- Kester

Preview bug regarding Table of Contents and Annotations

I'm involved in a paperless pilot project and am having a difficult time circumventing an issue in Preview.
I'm re-formatting material for executive meetings from WordPerfect, Word, Excel and PowerPoint into bookmarked PDF format in Adobe Acrobat Pro X. When they are opened in Preview by senior management on MacBook Airs, the Table of Contents links everywhere correctly. However, the moment they add an annotation (in this case, notes), the table of contents is thrown one page off, regardless of their place in the document. Even after removing the note, the table of contents does not revert to the proper place. I'm assuming this occurs because the annotation throws off the markers from the imported bookmarks.
Using Acrobat Reader on the Airs isn't an option since annotations aren't possible. We are also really trying to keep production of the PDFs limited to Acrobat Pro to ensure cross-platform compatibility of the Table of Contents.
Has anyone else encountered these issues? Is there a potential workaround?

A lightweight alternative to Acrobat Pro for creating a TOC is PDFOutliner ($5 on the Mac App Store.) Adding annotations later to the PDF does not affect the TOC generated by PDFOutliner.
Note: I am the developer of PDFOutliner.

MDM Buisness Content

Hi all
We are about to begin scoping for a CMDM within ECC6.0 rollout project.We want to determine which Data Objects we will model in MDM. Apart for the Standard business contend for customer,material, vendor, & employee etc. is there any other object that we could consider?
Can anyone share some experience with BOM's, GL Accounts or others Objects.
Anyone handling Pant Data (local data) in MDM?Or shuld this this be handled in the local system?
All help is appreciated
Regards
C

Hi,
I'd like to share this link with you:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/5d4211fa-0301-0010-9fb1-ef1fd91719b6">MDM Data Modeling</a>
Hope this document will help you
Krutarth

Regarding XI Installation Content

Hi Experts,
Please Let Me Know What Are The Requirements To Install The XI On My PC....
1.....About What Software CD's I Need to have?????
2.....About System Requirements.......
Here I heard that Windows 2003 Server in Required OS
But in my PC i have XP OS ..........Is it is OK To Install the XI on My PC???????
3....How Wil Be the Process Of Installation......First which S/W I Need to Install ..??
Please Let Me Know All the Above Mentioned Questions.........
Regards
Khanna

HI
follow this thread
XI installation
Entire information is given in this guide-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
and all details available at - https://websmp205.sap-ag.de/instguides -->SAP NetWeaver
null

Regarding Info Area content

Dear Friends,
How would we know the list of transfer rules or update rules containing in one info area. Do we have any standard program or table where in we can get the list.
Thanks in Advance.

Hi jyotsna,
for list of transfer rule plz refer the below table
RSTS ---> LIST OF TRANSFER LIST
RSTSFIELD ---> TRANSFER STRUCTURE FIELD.
RSTSRULE --> TRANSFER STRUCTURE RULE.
FOR UPDATE RULES.
RSUPDROUT -
> UPDATE RULE LIST
RSUPDDATOUT ---> UPDATE RULE ROUTINES.
plz refer to the below link for more details,
http://wiki.sdn.sap.com/wiki/display/BI/ImportantTablesinSAPBI(NW2004)
Thanx & Regards,
RaviChandra

Regarding BI& buisness content.

Similar Messages

Maybe you are looking for