Regarding BI Graph Installation in Forms

Hi All,
I am new to BI Graph. I have a requirement to embed BI graph in oracle forms 10 g. I am working on Forms 10g in Linux platform. Can you please mention the steps that i should do to embed the graph. I got the demos but only the windows version. Do we have a Linux version of the same as well.
Thanks and Regards,
Ajith

No. All the development happens in Linux and forms is also installed in Linux only.

Similar Messages

Regarding the Post Installation and SP Level

Hi All,
We have installed NWDI on our existing EP Dev Server.Installation was successful but regarding the post installation we are in a thinking as how best we could patch the newly installed NWDI system.
As our EP system is on SP 11and NWDI system on sp 9,Do we need get EP and NWDI Patch level in Sync? as there would be developers working from EP and BW as well on this NWDI server.
Here My doubt is:-
Do the Nwdi System needs to be in the same patch level as our EP system (as it is installed on EP itself.)
Do we need to run the Template for the Newly installed NWDI only after the Patch Upgradation?
Kindly Advice
Regards
Santosh.N.G

the patch level of EP and NWDI should be same

Domain creation error during installation of forms 11g

Dear all,
I have the following error, during installation of forms 11g, the installation completed successfully but in configuration section it gave error on the 1st step domain creation.
weblogic server version 10.3.6
forms and reports version 11.1.2.1.0
java version "1.4.2_06"
here is the error portion from installation log
----- **************** log *****************************-------------------------------------------------------------------------------------------------
Entering windows
OneoffTool Script Location: C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
oneoff command is: f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
[ProcessManager] Invoking:C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
    stdout=[
C:\Users\Nadeem\AppData\Local\Temp>f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
OPatch failed with error code = 1
    stderr=[java.lang.UnsupportedClassVersionError: oracle/opatch/OPatch (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Exception in thread "main" ]
sbStderr.length():891
[Applying patch f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p12429525_111070_Win32.zip and the java.lang.UnsupportedClassVersionError: oracle/opatch/OPatch (Unsupported major.minor version 49.0)
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
at java.net.URLClassLoader.access$100(URLClassLoader.java:55)
at java.net.URLClassLoader$1.run(URLClassLoader.java:194)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
Exception in thread "main" ]
oneoff command is: f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p6599470_111070_Generic.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
[ProcessManager] Invoking:C:\Users\Nadeem\AppData\Local\Temp\tmpOneoffTool1383064488002.bat
    stdout=[
C:\Users\Nadeem\AppData\Local\Temp>f:\Oracle\Middleware\Oracle_FRHome2\OPatch\opatch apply f:\Oracle\Middleware\Oracle_FRHome2\oneoffpatches\p6599470_111070_Generic.zip -oh f:\Oracle\Middleware\Oracle_FRHome2 -silent
----- **************** log *****************************-------------------------------------------------------------------------------------------------

user2040934 wrote:
Dear all,
I have the following error, during installation of forms 11g, the installation completed successfully but in configuration section it gave error on the 1st step domain creation.
weblogic server version 10.3.6
forms and reports version 11.1.2.1.0
java version "1.4.2_06"
You have the wrong Java version installed. Do you already have another Forms version installed (like Forms 10g)? I ask this because Java 1.4.2_06 installs with the Oracle Developer Suite 10g. For Fusion Middleware 11g (Forms 11g) you need to have Java 1.6 installed. If you already have Java 1.6 installed, then you will need to modify your System PATH so that it lists Java 1.6 before Java 1.4. The error you are getting, "stderr=[java.lang.UnsupportedClassVersionError" is because Java 1.4 doesn't support the method the installer is using. Run the following command from a Command/Dos window: "Java -version". If it does not show Java 1.6.0_??, then your PATH is still not setup correctly or you don't have Java 1.6.0 installed.
Craig...

Installer "RightFax Form for Outlook"

Dear,
I am doing the configuration of the "Cisco Fax Server Version 9.4". I've done the downlad the installers of Cisco's website (because the CD was lost), install and configure the modules and the CUCM (7.1.5.31900-3), but do not know where to find the installer "RightFax Form for Outlook", which contains "RightFax client installation".
I did not find this application on the Internet or Cisco.
So how could I get this installer?
Thanks for the help.
Patrick
ps: I'm using Outlook 2007

Hello Pouyan,
You can develop an add-in for employee with an Outlook form region. There is no need to publish a customized form. You can store values in user defined fields which you may parse on the manager's side later. See
Creating Outlook Form Regions in MSDN for more information.
Then you can develop a VBA macro or an add-in for the manager to collect the data from the incoming emails. You can customize the Explorer window adding a window like you did with inspectors to display the information. But in that case there is no trivial
way to get the job done. You need to use Windows API functions. See
Adjacent Windows In Outlook and
Creating Adjacent Windows In Outlook sample project. I have also found the
Additional custom panel in Microsoft Outlook article for you. As an alternative you may consider using third-party tools like Add-in Express. It allows to add custom forms to the Explorer windows in Outlook.
The second way is to show a web page for the folder where you can display the data you need. See
How to programmatically create an Outlook home folder page in the Outlook Today style .
The third way is to use Solutions Module to get the data displayed. See
Programming the Outlook 2010 Solutions Module for more information.
Finally, it can be a single add-in installer or two separate add-ins (for managers and clients).

Regarding BI GRAPH BEAN

I am using BI GRAPH BEAN in 10g Form. Graph style is "VERTICAL". I want to show the actual value of data at the top of each bar. Which property of BI GRAPH support this.
Secondly I want to change the color of bars which property support this.
Regards

hi I see you are using BI GRAPH BEAN in forms 10g, I want to know how you did because I can`t configure it yet in forms 10g my email is: [email protected] please hepl me to configure BI GRAPH BEAN in forms 10g

Print Charts/Graphs on Smart Forms

Hi Seniors,
Here is a requirement on Smart Forms:
I need to print Charts on Smart Forms. I have been through many answers on SDN but unfortunately, there are not many appropriate solutions. I executed some standard reports and got Charts and graphs as output but am not able to use it to display the same on Smart Forms. I have even tried using classes for charts / graphs, business graphics(may be there would have been some sequential procedure for that).
In the Smart Form, I have tried Form Attributes>Output Options>Output Format--> XSF output
with output mode: 'Spool' and Output Device: 'XSFOUTDEV' from help.sap(I couldn't get what output device that was and was unable to execute).
I have tried executing transaction GRAL(demo reports for SAP graphics) too.
I found a report that would produce graph in Excel, I executed it, saved the graph from excel in '.bmp' format in SE78 and then printed it on Smart Form. But all I want is to have it done dynamically.
I saw answers that we can save the graph chart/graph onto the desktop, upload it and then display it on the Smart Forms. But, when i tried it, I saw that it could be saved only in '.dat' format. I have to save it dynamically in a supported format like '.bmp' and print it on the Smart Forms(the graph would change depending upon the input values). Please help me resolve this.
Thanks in Advance,
Chaitanya.

Dear Bouman,
Thank you for the reply. I can write a report if would helps me to upload images dynamically. I saw your program but, here we cant give the name of the chart that comes as output. I tried to save the chart but it comes in '.dat' format but not in '.bmp' format. We may be having some classes or function modules that we need to call in a particular sequence. What other options do we have. Please help me resolve this.
Regards,
Chaitanya.C.N

Graph in adobe Forms

Hi,
In programming, i have populated values for graph and displayed it in report programming using Function Module.
I want to display the same graph in Adobe. Is it possible?
If Yes, please guide me.
Thanks in advance.

Hi,
The only way to include graphs is through images. This means you have to generate your image "outside" and provide it through the data stream to the form.
Regards,
Juergen

BI GRAPHS IN ORACLE FORMS 10G

AFTER FINDING SOLUTION TO MAKE GRAPHS CUSTOMIZATION IN ORACLE FORMS 10G, I was suggested to use BIGRAPH so installed all package(formsgraph.jar and whole demo package) and I configured properly all my files. But graph.fmx which exist in demo when run on browser does not display any graph on bean area it might be as no data retreived or data not populated due to bug in fmb . I made new temp.fmb by only creating single item and bean on canvas. On validating item I wrote following syntax.
BEGIN
     IF (:BLOCK1.TEXT_ITEM5 = ' ') THEN
     message('validating');
     set_custom_property('block1.BeanArea1',1,'GRAPHTYPE','HORIZONTAL_BAR');
set_custom_property('block1.BeanArea1',1,'ENABLE_TOOLTIPS','ALL');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'SET_DELIMITER',',');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','Europe,Sales,25000');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','USA,Sales,70000');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','Europe,Taxes,2500');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','USA,Taxes,2500');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','Europe,Savings,22500');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','USA,Savings,67500');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_DATA_TO_GRAPH','');
SET_CUSTOM_PROPERTY('block1.BeanArea1',1,'ADD_ROWDATA','UK,Taxes,67500');
set_custom_property('block1.BeanArea1',1,'SHOW_GRAPH','');
     END IF;
END;
Still surprise as forms open successfully on Web browser but no chart displayed. I am really fade up as I required lot of time to install demo version in my original oracle 10g software. My boss say how can new version have no features of graphics. I can not tell or say to buy that oracle graphics are customized in Oracle 11g.
If anybody have solution for above, please reply.
Thanks,
Prashant

Hello Omama,
Problem of Bi Graphs have been solved by running url with extension as config=Bigraph. For my next problem in graph of 10g I am going to post new thread as BI Graphs does not serve my problem. Anyway Thanks.
Regards,
Prashant

Regarding dynamic tables in interactive forms

Hi All,
        I have designed a webdynpro view which contains a table,i have to generate a pdf format file which also contains
a table as there in the webdynpro view.
        I have designed a dynamic table in interactive form and binded the interactive form ui element with the datasource and pdfSource.
In the interactive form i am getting only one row data of webdynpro view table.In the Object palette, I selected Repeat Row For Each Data Item.
       share with me if u have any idea or send any document regarding table binding(dynamic) in interactive form.
Thanks & Regards,
saleem

Hi saleem..
Check this link..
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0401535-f81c-2a10-0192-ffd41e8e8d59">Dynamic interactive forms an example</a>
https://www.sdn.sap.com/irj/sdn/webdynpro?rid=/library/uuid/49f2ea90-0201-0010-ce8e-de18b94aee2d#47
Urs Gs

Issue Regarding Chinese characters In Smart Form Print preview..

Hi All,
I am working on a smart form development for chinese users. The requirement is the user will login using English & when the delivery will be issued for output, a check will be done on the country of user. If that comes as china then the international version (C) maintained for that customer will come as output.
Now the problem is even if I login using EN or ZH the below issue I am facing always.
In the database I can view the details in chinese properly by logging in as ZH. During debugging also i checked the data from table ADRC & MAKT is coming in chinese properly. But when i gave the values to be output in SmartForm, it is showing the characters like how it will look if I login using EN & view the table contents.
When i view the data by changing character set as Simplified Chinese then in table i can see chinese texts properly. But when the same data goes to print preview it shows the chinese characters like as it would appear when character set is Unicode or West European..
Please help..
Thanks in advance.
Edited by: malayanayak123 on Jun 1, 2011 5:48 AM

Dear,
print preview and physical printout are two different things.
PrintPreview:
The data stream will be sent to the frontend and rendered with windows-fonts etc (for backend prints a simulation).
Printout:
Frontend: You need a printer, that maps the character, you have to use SAPWIN or SAPWINCF when using cascading fonts. The rendering will be done in the windows spooler.
Backend: Your printer needs also a mapping (look like something with UTF8). Also the printer needs the fonts installed because the rendering will be done in the printer!
If you use the pdf-printer in SAP, you need to upload all necessary fonts (TTF) for the pdf-composer. Also you need a unicode pdf printer for that.
Regards,
Christian

Installation of Forms 10g on Windows Vista

Hello All
I am also looking for the patch 7047034 and the OPatch as I am not a registered metalink user. Pls help by anyone will be highly appreciated.My email address is [email protected] I reside in UK, London and my forms rel2 10.1.2.0.2 installation is stuck without these patches, i need to upgrade to 10.1.2.3 pls help, anybody. I am stuck! Thanks in advance.
Cheers
Aj
Edited by: user9925154 on 02-Mar-2010 15:40

Hello Friends,
I have been unable to download the patch for developer 10g forms as I am not a metalink registered user. But I have downloaded other browsers such as firefox2 and netscape 9.0.0.6. I am trying to run my forms 10g rel2 with these browsers. But on netscape it says Java is not enabled, even though I have enabled Java. And it shows me a grey page. On firefox 2, it says 'click here to download plugin'. After you click on it, it says 'No suitable plugins were found', 'Unknown plugin(application x/jinit-applet; version 1.3.1.22) and a text box is beside it labelled 'Manual Install'. When you click on this manual install button, it takes me to this page :
http://ajayia-pc:8889/forms/jinitiator/us/jinit_download.htm.
Please can anyone help with advice as to what direction to go. I am stuck with my installation. I am using Windows Vista Operating System.
Many Thanks.
Cheers
Aj

Regarding Create Record in Oracle forms

Hi,
I am having a form in which I had two sections, master and detail. Master section has a field in which I select week range like 01-FEB-2012-07-FEB-2012.
Based upon this I am populating with the help of CREATE_RECORD(writted in when new block of detail) , 7 rows in the detailed section,
01-FEB-2012
02-
03-
till 07-FEB-2012.
There are other columns in the detail section beside this date field. Now at a stage when nothing is saved, I can go in the master block and change the week rangeb from LOV and accordingly the date field in the detail section gets populated with new 7 days/rows. (Its happening as the system.record_status = INSERT).
Now what I need is when I select the date range in master, 7 days as usual gets populated in detail section. Now I save and then I try to change the lov for the date range in master i doesn't allow me to change .(presently the system.record_status = QUERY) although I have taken 3 modes (NEW , INSERT & QUERY in the when new block code.
I am now not able to sure if at all what I want is feasible or not considering the mode when its QUERY. I tried doing some r&d but not of much help. Can anyone plz advise if this is a feasible requirement or not possible as per standard method.
Appreciate suggestions on this.
Thanks & Regards,
Ad

Hi Ahamed,
Actually where clause is not applicable in my requirement. I am not finding anything in the detail block. I will be creating new records based upon the week LOV value entered.
The form is used to create employee's weekly shift. So if I want to create shift for an employee say XYZ for the week 01-JAN-2013 - 07-JAN-2013. I will select the value as 01-JAN-2013 - 07-JAN-2013 from the LOV in master block.
Then I move to the detail block, and as a result of the code written in when new block of detail,
the column DAY & DATE will be autopopulated for the 7 rows:
DAY DATE
SUN 01-JAN-2013
MON 02-JAN-2013
TUE 03-JAN-2013
and so on ........till
SAT 07-JAN-2013
Now there are other columns beside DAY & DATE like shift name.
I provide a shift name on each of the 7 days and I save it.
Now my screen in master wil look like:
Employee : XYZ Week: 01-JAN-2013 - 07-JAN-2013
Detail screen will look like:
DAY DATE SHIFT and there are other columns
SUN 01-JAN-2013 Morning
MON 02-JAN-2013 Morning
TUE 03-JAN-2013 ..........
and so on ........till ...........
SAT 07-JAN-2013 Night
At this stage if I go to the master screen and try to change the LOV value to say 08-JAN-2013 - 15-JAN-2013. Then I expect that detail screen will be autopopulated with new values :
DAY DATE
SUN 08-JAN-2013
MON 09-JAN-2013
TUE 10-JAN-2013
and so on ........till
SAT 15-JAN-2013
This thing is happening at the unsaved stage i.e if not saved and I change the LOV value in master multiple times, the detail will be autopopulated everytime replacing the previous 7 rows.
But not working once SAVED i.e its not allowing to change value in the week LOV in master. I am able to click but it doesn't opens up the list.
Hope I am able to explain the issue.
Regards,
Alok Datta

Regarding GP Process for Adobe Forms

Hi,
    I had created a form through adobe life cycle designer and i want to use this form for GP process in portal.I had configured GP process for adobe and i followed time off process document but am unable to do the same process for a new form .
Please help as i'am new to this GP process
with regards
Pradeep.B

Hello
I would suggest trying to configure the parameters using the Config Tool. Here is a small procedure to help you with the navigation:
     1.Open the Config Tool.
     2.Navigate to cluster-data -> template <name of template> -> instance <name of instance> -> services -> caf/eu/gp/model.
The template represents the usage type installed on your server (for example, EP). It consists of one or more instances that can be configured in a different way.
     3.Modify the required system parameters:
        a.      On the Service properties screen, select a parameter from the table.
        b.      In the Custom value field, enter a value for the parameter.
        c.      Choose Set.
The new value appears in the Value column.
In the Template value field, you can see the default value (if any) of the parameter you have selected. You can restore the default template value for any parameter by choosing Restore to Template.
Hopefully, this way round it will work
Best regards,
Petra

Dynamic graph in Smart Forms

Hi
I have searched the forums and noticed this question has been put forward many times but without a complete solution.
I have so far managed to use the IGS to create a .JPG/PNG file for me. I seem to have an error while trying to create a BMP file, basis is currently looking into this for me, i get a LISTENERRFC : error.
I'm using class : cl_igs_chart_engine
to generate a chart from the IGS, this is returned to me in a MIME table format.
Now how can I use this MIME table to insert it dynamically in the SMARTFORM. I see there is provision for Dynamic determined graphics in smart forms but i don't think it can be used here.
Does anyone know how to do this ? Is there any other more effective way of inserting dynamic graphs into SAMRTFORMS
Another question is class : cl_igs_chart_engine, how can you create a line graph instead of a bar graph ?
Thanks

Hi Kevin,
Dynamic graphic in samrtform is supported provided you have the BMAP ( Bitmap ) created in SAP. In the graphics node of SMARTFORM you can assign a variable &GRAPHIC& as the name. From the program pass the graphic name in variable "GRAPHIC" through samrtform interface .
The prerequisite is that the graphics should be there in SAP database at the time you call smartform .
About your other question I have no idea but I can say that if you can have a graphics created on your PC at runtime you can always upload it to SAP using report RSTXLDMC , just before calling smartform. However this would generate a lot of graphics on SAP even if it is for one time use by smartform . You will have to find a way to delete subsequently .
Cheers

How to develop graphs in interactive forms

Hi ,
I designed one graph in webdynpro. I need to put that grpah in adobe forms.......
Pls help me.............................

Hi,
Please refer the below link and see if your problem gets solved.
http://www.****************/Tutorials/WebDynproABAP/BusinessGraph/page3.htm

Regarding BI Graph Installation in Forms

Similar Messages

Maybe you are looking for