Regarding BOM item return(KITs Return)
Can any one please help me:
Basically a BOM item (TPH77500--- Not Batch determined) hold 3 components TMD7710, TMD7711, TMD7712.( all the components are batch determined)
I have completed the Oto C for the above BOM item with a qty of 2. When I am trying to return 1 qty of the BOm item, It is populating its components with qty 1, butduring delivery it is saying the error log as below;
1. Document is Incomplete:You cannot Post Goods Movement for the material TPH7750
2. The batches are not defined for the delivery item TPH7750.
I have checked in the path edit---> Incompleteness Log, In that It is giving adescription:as per the status Group D8 in the Incompleteness Procedure L1 The Batches /valuation Type is not completely allocated.
but the BOM item is not a batch determined material where as the components are Batch determined.
Can any help me how I can rectify the above one so that I can check the KITs Return Process and the KIt's Component Return Process.
Regards,
BadariNath.G
9989425075
Hi BadariNath,
Assume the bom item is not maintained "batch management" in MM. Pls ensure "Batches /valuation Type" is not checked in Incompleteness Procedure.
Similar Messages
-
Hi All,
I have a requirement to overwrite the BOM components with the new components.The program should just overwrite the existing components.The program is not required to check the existing components it should just overwrite with the new structure to the existing BOM.
I am trying with the function module CSAP_BOM_ITEM_MAINTAIN but I am not succeeding on this.
Please suggest somebody how to do this?
Regards
MaheshChanging a Material BOM
In the standard system, you use the following function modules to change a material BOM:
CSAP_MAT_BOM_OPEN
CSAP_BOM_ITEM_MAINTAIN
CSAP_MAT_BOM_CLOSE
Open BOM: CSAP_MAT_BOM_OPEN
This function module is used to open a BOM for changes. The BOM is imported with the relevant valid-from date and is locked. Provided that no error occurs opening the BOM, the result returned by the module is the BOM header data, a table of BOM items, and a table of object dependencies.
INPUT:
Material (MATERIAL)
Plant (PLANT)
BOM usage (BOM_USAGE)
Valid-from date (VALID_FROM)
Change number (CHANGE_NO)
Revision level (REVISION_LEVEL)
Indicator FL_NO_CHANGE_DOC (do not write change documents)
OUTPUT:
BOM header data (O_STKO)
Table T_STPO (BOM items)
Table T_DEP_DATA (object dependencies basic data)
Table T_DEP_DESCR (object dependencies descriptions)
Table T_DEP_ORDER (object dependencies allocation)
Table T_DEP_SOURCE (object dependencies source code)
Table T_DEP_DOC (object dependencies document)
Maintain BOM Items: CSAP_BOM_ITEM_MAINTAIN
Once you have opened a BOM successfully (without errors), you can use this function module to process the individual BOM items.
You can:
Create new items
The fields for item node and item counter must be initial when you create a new item.
Change items
From the table of BOM items, select the item you want to change, and transfer the changed data. The fields for item node and item counter must contain a value, because these are the fields used to uniquely identify an item in a BOM.
Delete items
From the table of BOM items, select the item you want to delete, and set the deletion indicator. The fields for item node and item counter must contain a value.
Maintain object dependencies
If you want to change or delete a local object dependency for a BOM item that has more than one dependency, enter the internal name of the dependency.
You cannot use the external name that you entered when you created the dependency to identify the data belonging to a local dependency.
INPUT:
BOM item (I_STPO)
Table T_DEP_DATA (object dependencies basic data)
Table T_DEP_DESCR (object dependencies descriptions)
Table T_DEP_ORDER (object dependencies allocation)
Table T_DEP_SOURCE (object dependencies source code)
Table T_DEP_DOC (object dependencies document)
You cannot change the item category of an existing item.
You can only change each item once in one session (between when you open and close the BOM).
If you see the error message "Item cannot be changed" in the log, the following reasons may apply:
The item is not valid on the valid-from date entered, because it becomes valid at a later date.
Object dependencies are allocated to the item, but the change number you used to open the BOM is not active for object dependencies.
The item has already been processed with another change number on the valid-from date entered.
Close BOM: CSAP_MAT_BOM_CLOSE
Once you have made your changes, use this function module to close the BOM. This saves the changes, unlocks the BOM, and writes the log.
The BOM is only saved if at least one item was changed successfully.
Please note the following points when changing BOMs:
There is no function module for changing header data.
The same restrictions apply as for creating a BOM.
You can only process one alternative or variant. If you do not enter an alternative when you call function module CSAP_MAT_BOM_OPEN, the function module opens alternative "01". -
Dear PP Experts,
Can anyone tell me, what is the use of 'INSERT' function in the BOM - EDIT menu.
When i used it the system inserting the many lines in the item screen. I want to insert the only one line below the line which i selected.
Thanks,
Regards,
Sachin PatilSarfaraz,
As per your answer after entering the item in the inserted line & enter, the item is going at the last line of the BOM not in the inserted line . The item number showing is correct.
Our client wants this item should come in the inserted line
Thanks,
Regards,
Sachin Patil -
To stop delivery if one of the BOM items not available. -- how?
I have BOM items
Item Description
10 abc
20 def
30 xyz
Items 10 and 20 are available in a particular date but item 30 is not available. Then save the document.
user does not know items are available or not then they will go VL01N.
There are empty deliveries with out items also but they are saving delivery.
Now they want stop in delivery if there is no items available, the system should not save the document
This is my requirement.
Please let me if you have any queries.Kindly help in this regard by suggesting suitable ideas.
Regards,
AnbuI have a requirement regarding BOM items.
Client requirement is such a way that they have so many BOM items.
Example:
10 monitor
20 CPU
30 key board
When every it deliver these like this they so so many BOM items they use so document types different item categories.
At that time 10and 20 are available 30 is not available. Just they save the document. They will order number another user.
Based on the order number another user will create Delivery it is main 30 item is not available Empties in deliveries (reason is its group delivery.)
But they are able to save the document now they want if in deliveries no item system should not allow save the document.
please through some light on what basis we can stop saving the delivery document
Regards,
Anbu -
Hi All,
For Returs of BOM Material, what could be the Item Category. For Forward Moement the Item Category group is ERLA.
Main item category = TAQ
Sub Item Category = TAE
For Returns what will be the Item category for the same.
Thanks.
Edited by: sthen on Apr 25, 2008 9:45 AMHi Lakshmipathi,
Can you please tell me what the item category for BOM item for returns?
can we use text RETX for the subitems?
Thanks,
Michelle -
Item Category for returns order and delivery
Hi,
We are using BOM. As we know basing on the Item cat group ERLA, LUMF there are 4 different item categories TAQ,TAE,TAP,TAN respectively for main item and sub items. Now my business wants to do return process for a BOM item which has been already delivered and invoiced.
Please could any body tell me what would be the item cat for BOM item in return process?
Is there any SAP standard item cat available for this?
Can we configure an Item cat for the same?
Your quick answer would deffinately appreciated.
Regards,
Revan.Hi Revan,
In standard procedure there is no item Category assigned for the returns of ERLA or LUMF material. You may have to define new Item category similar to REN but with the structurescope defined as 'A' or 'B' as per the requirement.
Regards,
Karthik. -
Hi All - After the upgrade, I am getting SP-Crawl Error for certain links. I check the Crawl component has proper permission.
Google is showing some article like
http://blog.karstein-consulting.com/2012/04/20/error-in-crawl-log-the-sharepoint-item-being-crawled-returned-an-error-when-attempting-to-download-the-item/
not sure if this resolution is referring to 2010 and/or 2013.
I checked the registery editor. I couldn't find 14.0 under the Office Server.
Any clue?
Regards,
Khushi
KhushiI checked the web application policy the search crawl account has full read permission.
Crawl
Fiddler
Log Error referring the Correlation ID
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Parent No
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Logging Correlation Data xmnv Medium Name=Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD) e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.14 w3wp.exe (0x1698) 0x0118 SharePoint Foundation
Authentication Authorization agb9s Medium Non-OAuth request. IsAuthenticated=True, UserIdentityName=, ClaimsCount=0 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af71 Medium HTTP Request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af75 Medium Overridden HTTP request method: GET e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.15 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
General af74 Medium HTTP request URL: /sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1738 SharePoint Foundation
Files aise3 Medium Failure when fetching document. 0x80070090 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=20.5461867360237 e8b1679c-0476-70d4-9fcd-2cef5be44461
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:<SiteURL>/sites/HR/Shared%20Documents/Benefits/Insurance%20Benefits/Life%20Insurance/Basic%20Life%20and%20ADD)).
Execution Time=29.917489513332 e8b1679c-0476-70d4-9fcd-2549ba3ee9d4
01/06/2014 13:05:06.17 w3wp.exe (0x1698) 0x1960 SharePoint Foundation
Monitoring nasq Medium Entering monitored scope (Request (GET:<SiteURL>nsurance%20Benefits%2fLife%20Insurance%2fBasic%20Life%20and%20ADD&FolderCTID=0x01200039DA632EEACF264685CF39D68A18F7C8)).
Parent No
Any clue?
Regards,
Khushi
Khushi -
If I am browsing on site such as Ebay or any shopping site and click on an item, when I return to the search page I am once again at the top of the page and have to search down for where I was in the list of items. This is not only on Ebay it is everywhere I search. Firefox goes back to the top of the page . It is annoying to have to figure out exactly where I was if I left the page and then returned. This is a hinderance when using Firefox. I have considered uninstalling it because of the inconvenience of 're-searching' after already doing a search. Firefox used to take me right back to where I was if I left a page, but that feature is not working now. I am not sure how to change this in the settings.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy paste the following:
~/Library/Caches/com.apple.Safari/Cache.db
Click Go then move the Cache.db file to the Trash.
Quit and relaunch Safari to test. -
Difference MBRL - ME21N with items specified as return items
Hi Gurus,
can you please help me to understand the difference of these two return processes.
We are using ECC 6.0 and want to implement a "standard" process for returning goods to the supplier if they don't meet our expectations.
So now i have implemented the whole customizing for doing this with ME21N and now i found the transaction MBRL, wich also allows to creaty SD-Deliveries. And now i am wondering where is the difference.
With ME21N i found one big disatvantage - i can not refere to another document, like a delivery schedule or former purchase order.
For information i would be very grateful.
Thanks in advance.
GeorgHi Gordon,
thanks for your reply.
So for me it seems that ME21N (PO creation) has no advantage for returing goods to the supplier. No reference to previous document, additonal step in the process to create a PO.
With MIGO (Return Delivery) or MBRL you can refer to another document and you can also create SD-Deliveries.
So my question is more general - why does SAP provide the possibility to return goods within the ME21N when there is an easier and faster possibility. For me having another document (purchase order with item specified as return item) just means having additional complexity.
But maybe I am wrong and there is an advantage i am not able to see at the moment.
Thanks
Georg -
The SharePoint item being crawled returned an error when attempting to download the item.
I get this error when I run full crawl.
The SharePoint item being crawled returned an error when attempting to download the item.
I did make sure that the crawl account has full read access to the web application. I am able to access the page and site just fine from a browser. I am not sure what is causing the problem.On closely looking at ULS logs, this is what I am noticing....
CSTS3Accessor::Init: SharePointError found in URL
http://xxxxx/default.aspx header value 0, hr=8004FD0F [sts3acc.cxx:566] d:\office\source\search\native\gather\protocols\sts3\sts3acc.cxx
CSTS3Accessor::Init fails, Url sts4://xxxx/siteurl=/siteid={c011d5c9-9019-41e8-bf5a-5176739b2b79}/weburl=xxxxx/webid={e42001c0-2ef1-4a8e-8fe5-361d72fa60c2}, hr=8004FD0F [sts3handler.cxx:312] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx
CSTS3Handler::CreateAccessorExD: Return error to caller, hr=8004FD0F [sts3handler.cxx:330] d:\office\source\search\native\gather\protocols\sts3\sts3handler.cxx -
Credit Memo for Service items that are returned
Hey Friends,
I'm trying to create credit memo for a service item that is returned. I sold one laptop with one year extended warranty and now I want to RMA both the laptop and extended warranty.
What are the setups to create credit memo - when I do the RMA, it's only has one line because the extended warranty is non-returnable. I ran Main Billing program but nothing happened. After running autoinvoice, I was able to see the credit memo only for the laptop and not the service item. Ideally they should be in the same credit memo and not separate.
Help.
Thanks a lottttttttt.Any ideas gurus?
-
How to get the latest and valid BOM item entry from STPO
hi,
may i know with what condition we can get the latest and valid BOM item entry from STPO table?
i have STLNR and IDNRK as a input. But i realized that it would return multiple entry due to the combination of valid-from and valid till date.
can i use stlnr,idnrk and stpoz (with the latet counter) to get the latest and valid BOM entry?
thank you.Hi
You can get the latest BOM either by using the latest valid from date DATUV or latest internal counter STPOZ
Regards
Shiva -
CS03 - BOM Item quantity - RC29P-MENGE
Hi All,
Could you let me know the table & field name - from where i can get BOM Item quantity field.
I see it on
transaction : CS03
Program name: SAPLJ3AC
Screen Number: 0830
Field: RC29P-MENGE
But RC29P is structure, i am looking for table to get the data, is there any function module can return directly or do we have separate table, please let me know.
Thanks
SatyaHi Satya,
In a CO project, I used the function BAPI_COSTESTIMATE_GETEXPLOSION to read the BOM for the material, the MENGE is under fieldname QUANTITY on table explosion_list.
And, also used another two BAPI's which gather more detailed information BAPI_COSTESTIMATE_ITEMIZATION and BAPI_COSTESTIMATE_GETDETAIL.
Hope this help you.
Regards, Fernando Da Ró -
Returnable & non returnable gate pass
Hello SAP Experts,
There is the requirement for the procedure & configuration of returnable & non returnable gate pass for any material going out for repair or for refillment in our company.Also tracking its billing documents which can include service + replacement of any spares.With print out of the document.
Service Management is not configured in our company.
Thanks & Regards,
Anishahi
>1. im not able to get the print out in MB90
Check following if useful to u
1. Maintain the Printer Name in SPRO->Malt Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for GI/Transfer Posting Documents
5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the foll:
a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Tr medium is 1
b. Print Parameter is 7
6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Pr Det by Pl/StoLoc, maintain the Output device for all your Plants
7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
Now the settings are ready for Printing Material doc
8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.
>2.for the m/c sent for repair, if they found some damaged part & replacing it, then how to capture its bill part.
this part will come in ur process part
if ur using ur own part then agin u have to issue it to the vendor
or if its been used by the vendor then u have to pay charges manually
regards
kunal -
Hi experts,
I need guidances and solutions on my problem here.
I retrieve bom level using function 'CS_BOM_EXPL_MAT_V2'. Then it returns all levels of bom components, but here i need to do a checking.
Loop at table of bom return by function 'CS_BOM_EXPL_MAT_V2', if the matrt = ZHLB and matkl <>WP100 at level 1, then i need to delete all the sub bom items at the following levels(level 2 and level 3) belongs to it.
How can i do a checking on this and delete all those related bom items?u can do by using the table STAB output.
Maybe you are looking for
-
I upgraded to PE 9.0 (with updates) after a very frustrating experience with PE 8.0. Was looking forward to having so many problems fixed. PE 9.0 just presents a host of new problems! I am having 2 issues right now: 1) I followed Steve Grisetti's adv
-
How do i insert a signature into emails, with my name address website number etc
want to do something similar to outlook express where I was able to send a different signature from separate email accts depending on the business I was sending the email from
-
File Upload Problem in .jsff page
Hi I tried to upload a file in my jsff fragment.(I did the POC in jspx page and its working fine ) But when in fragment when i tried to add af:form elemenst errors are coming and as per my research we cann t add af:form element in jsff page. Cna any
-
How can I find and read emails that Thunderbird has downloaded to my computer?
I have read that Thunderbird puts copies of emails into the profiles folder. On finding the folder I see what looks like the folder names I have made in Thunderbird and yet see no individual emails. When I try to open them Thunderbird wants to make t
-
Looking for Solution(How to wait some particular time in pi7.1)
Hi Experts, We have a source folder with a number of files in it, same name but with date time stamp. PI reads the files and sends them to the target folder with one unique name. From the target folder the file is picked up and processed by SAP, whic