Regarding BPM Errors

Hello,
What kind of errors we can expect from the BPM configuration and execution time.
Thank you

Hi ravi,
you can expect
a) mapping errors in transformation steps
b) system-errors in send-steps
In a block-step you can insert exception branches for the two kind of errors.
a) In transformations steps (properties) you can determine that the exception branch for mapping errors will be processed in case of an mapping error
b) In send steps (properties) you can determine that the exception branch for send errors will be processed in case of an mapping error
Regards Mario

Similar Messages

BPM error handling

Hi,
I've read many messages on this forum regarding BPM error handling but am still a little confused.
In my scenario the BPM is quite simple. All it does is Call web service (synchrous) then transform and then call another web service synchronous.
Now , If any call to the two web services fails , I would like to be able to restart the two calls... now if they fail again, I would like to be able to restart the two calls again... until they work. But each time the restart would be done manualy in the BPM monitoring transactions.
The way I understand the error handling
if I put my synchronous send steps and transformations in a step and catch the exception they throw , I can send myself an alert and then throw another exception which I dont handle. This way , since that exception is not handled , it will set the process in error and I can restart the process later.
However , how can I set it up so that when I restart the bpm , both calls are done again and the same exception handling happens.
Now , when I restart, it seems only what comes after the block and the exception is executed. If I put the sync send calls in the exception handling branch, that will allow me to run the send steps once after an exception...
Thanks.

Even if I don't throw the exception and its a System error on the synchonous call, the BPM is in error but the next call will
go through...
I don't know what the point of EOIO was in that case ?
Even having an Exception branch is enough....you need not compulsorily have anything in it.....so when an exception occurs in your Sync step the control goes to the Exception Branch of the Block....but since there is no step defined in the branch nothing happens.....and the Control then passes to the next branch as in a normal flow.....
Since the Exception branch is defined the BPM will not wait/ stop/ error-out if any thing goes wrong in the Sync Send step.....it will continue....this is the normal behavior....an error entry will however be shown...if you want that your process stops if the Sync Send fails then have a Control Step (Action--> Cancel Process) in the Exception Branch
Regards,
Abhishek.

Queue blocked after BPM error!

Hi,
Is there any configuration steps to do in order to avoid incoming message to be blocked (Scheduled on outbound side) in the queue when there is a bpm error.
Thanks in advance,

Hi,
yes we can do through SXMB_ADMIN, SMQ1..
Outbound Scheduler (Transaction SMQS)
If the Outbound Scheduler is responsible for sending and executing these LUWs, and the logon data in transaction SM59 in the destination is incomplete, then any subsequent LUW calls might be executed under the logon data of a previous user. This occurs if the destination scheduler is already running under another user when the LUW is called and no logon data is maintained in transaction SM59. In this case, the destination scheduler runs under the user that started the scheduler (and this user's language). This means the destination scheduler runs under the wrong logon data, as does the processing of the subsequent LUWs.
Until now, destinations could only be registered in the Outbound Scheduler if the logon data (client, user, password, language) had been defined completely in transaction SM59 (if LUWs always needed to be processed under a specific user and language). Destinations with incomplete logon data could be registered only if the user and language was not important. In addition, some internal destinations (NONE/SPACE) do not allow you to enter a user or language in transaction SM59. For this reason, and for tRFC compatibility, you can only register these destinations in the Outbound Scheduler with the optional Without tRFC flag.
see below links
http://help.sap.com/saphelp_nw04/helpdata/en/1a/d2fc40b2c7f96fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ba/665f3c482a7331e10000000a114084/frameset.htm
The reason of blocking a queue
Queues getting blocked on error
Regards
Chilla..

BPM error at send step

hi experts,
In a simple File to File using BPM Scenario, messages are processed up to send step (only 2 steps are there recv and send). The receive side is okay. i can monitor the messages that are being picked up in the monitor. In adapter both sender and receiver adapters are showing green.
How to trouble shoot inside BPM errors; i tried SXMB_MONI -> selected PE from the message -> chose graphical description, where it shows red and an error in the send step.
the SXMB_MONI shows error in outbound message side. and the pipeline stops at Call Adapter.
thanks in advance,
nikhil
Happy 2008

hi Farooq!!
Others are working.
see, this is a simple scenario File BPM File and it uses simple message type and interface too. The interface mapping working fine. The Integration Process uses no correlations, just transferring the file as it is. IP is checked(F7) no errors found. when running, it picking the file and upto call Adapter it is working. in the SXMB_Moni it shows error in the outbound (PE) status. When we check it in the WorkFlow diagram, it shows error in the send step as Adapter Framework Server, still other scenarios are working fine with the BPM.
please leave good suggestions and checks
thanks,
nikhil

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

I can't log in to game centre but I can log into iTunes. I recently changed my password. I checked the troubleshooter and am getting the message regarding server error but how do I fix this? It doesn't specify this in that article. I don't have firewalls

Hello sadiepix,
The following article details several things that can be done to quell iTunes' constant need for authorization.
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/TS1389
Cheers,
Allen

Queries regarding BPM Process

Hi All
I have some queries regarding BPM.Please respond.
Can we create / modify BPM processes using any Webservices / APIs available
Is it possible to edit template used for notification mails in BPM?
Do we have any way to transform BPM process design to standards like XPDL and BPMN. ?
Thanks
Monika
Edited by: Monika Jain on Jan 5, 2010 1:42 PM
Edited by: Monika Jain on Jan 5, 2010 1:45 PM

Hi Monika,
Regarding which version ob BPM is your question for notifications?
In NW BPM 7.11, you can not edit the text of the notifications, only the link to Task and UWL is configurable.
In NW BPM 7.2, there is a new type of Notification activity, where you have the freedom to edit the text of the notification, also to add dynamic variables from process context, but for the generic notifications(like "New Tasks") the functionality is the same as in NW BPM 7.11.
Please find a link to NW BPM 7.11 documentation for configuring Notifications.
http://help.sap.com/saphelp_nwce711/helpdata/en/e4/32ff7865fa483dba3686160f5c6dd0/frameset.htm
Best regards,
Radost

Error Logging and notifying users regarding the errors

Hi..
we are designing a workflow in which if any user comes across an error (at any branch or while executing an action) must be alerted with the error and must send a notification to the admin that the process has stalled at that particular part of the workflow due to some error.
my doubts are
1.how can we notify the admin and the initiator of the workflow regarding the error a particular user gets.i saw in adminui that there are two tabs for the admin to view the stalled actions/stalled branches.but the admin and the user needs to be notified with an alert or email that a particular action has been stalled.
i think i conveyed my problem in a correct manner.if its confusing then plz tell me coz i am already confused in this..

Thank you sir for your immediate response of the query.
In the workflow which we are designing,a service request from filled by the user will be routed to the particular approver and he inturn will approve/reject the form accordingly.once he approves,the form is routed to the service provider who will fulfill the service requested and approved.
1.Now,for instance suppose that the workflow gets stalled while the form is with the approver.my question is how to notify the user that the service he requested is delayed due to the stalling of the process in between as well as the admin alerting him with the error which stalled the workflow process.
2.you said that it is easy to setup an email address within the adminui..but i dont know how to do that as i am a beginner.
3.Also u asked me to specify the errors for which we need to send alerts and email notifications...whatever error that occurs whenever the workflow gets staleld needs to be notified both to the user and the admin (as per our requirements).it would be helpful to us if u give a solution for this.
thank you..
Raghava Kumar V.S.S.

How do we contact a real person regarding billing errors?

How do we contact a real person regarding billing errors on our itunes account?

You can contact iTunes support via email via this page (I'm not aware of any phone support for iTunes) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Access dynamic attributes BPM; error while activating the process in sxi

hi everybody,
I have to access dynamic attributs in a BPM condition. I thought I could achive this when I click the radiobutton "contextobject" in the condition editor.
When using the value-help button on the contextobject a huge list of objects is shown for selection.
Strange to me is that also the radionbutton "interface-variable" is checked. I can not uncheck this radiobutton. But this makes the error while activating:
"Containerelement 'IDOC_'MyContainerelement'{XSDSIMPLE::xsd:string;SHeaderSUBJECT:ht' does not exist".
Has anybody expirience using the dynamic attributes/contextobjekts in BPM?
Thanks, Regards Mario

Hi all,
it seems to be impossible to access the attributes:
Technical Context Object in ccBPM
Regards Mario

BPM error after SP 14

Hi,
I have a strange problem. Since we upgrade to SP14 we have porblems with BPMs including a Message Switch like this example: SQLResponse./p1:MT_SQL_QUERY_response/StmName_response/row/VORGANGS_SCHLUESSEL = 300
on XI side everything works fine (test and activate) but on R3 side of XI (transaction SXI_CACHE) this BPMs result with error: 'VORGANGS_SCHLUESSEL' is not a component of data object 'PAYLOAD' - I have the similiar BPM on SP13 and it works fine...
Any idea or same problem?
THX Matt
--> I solve it on my own --> with SAP Note 890760
Message was edited by: Matthias Boettger

Hi Michal
The transport mechanisim is file import/export. We imported repository objects at namespace level and directory objects at scenario level. Just give some more input on this issue, before transport of all our objects (around 170) we did a sample tranport of only one interface object (both directory and repository objects)that worked perfectly.
Then we imported rest of all our objects and at this point we got cache refresh error in SXI_CACHE (communication error). We set the "No Timeout" option in the RFC destination INTEGRATION_DIRECTORY_HMI and all cache contents got re-freshed. After this we found only some BPM's are in status 0 but most of them in status 99.
I verified the container elements are present in my Dev BPM it is present and it works correctly. Hope this might give some clue on where the issue could be.
Regards
Prahllad

BPM: Error while executing Open - Unexpected exception

Hello! Everyone
Can you please let us know if anyone has faced similar issue and any suggestion on resolving the below issue would be very helpful:
We have been experiencing problem with opening BPM in our ESR; we are getting a Error while executing open - Unexpected exception for all the BPM.
I am copying the detail log, can you please help suggest steps to resolve this exception error in opening the BPM.
Thank you,
Vemul
Also, here is the detail log of the BPM exception while executing open in ESR:
====================================================================
= Root Exception ===================================================
====================================================================
Thrown:
com.sap.aii.utilxi.swing.toolkit.ServerCallCancelledException: Unexpected exception.
     at com.sap.aii.ib.clsif.gen.BeanAccessHandler.handleRuntimeExInBusinessMethod(BeanAccessHandler.java:87)
     at com.sap.aii.ib.clsif.oa.ObjectAccess.read(ObjectAccess.java:112)
     at com.sap.aii.ib.client.oa.ObjectHandler.read(ObjectHandler.java:119)
     at com.sap.aii.ib.gui.editor.DefaultPersistenceHandler.load(DefaultPersistenceHandler.java:94)
     at com.sap.aii.ib.gui.editor.XiDocument.load(XiDocument.java:249)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.load(OpenCommand.java:353)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.localOpen(OpenCommand.java:273)
     at com.sap.aii.utilxi.swing.framework.cmd.OpenCommand.execute(OpenCommand.java:211)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.execute(ExecutionContext.java:198)
     at com.sap.aii.utilxi.swing.framework.ExecutionContext.executeSafe(ExecutionContext.java:154)
     at com.sap.aii.ib.gui.operations.OperationsServiceProvider.executeDefaultOperation(OperationsServiceProvider.java:295)
     at com.sap.aii.ib.gui.nav.HierarchyNode.executeDefaultOperation(HierarchyNode.java:59)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.DefaultTreeCard.handleHierarchyEvent(DefaultTreeCard.java:198)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.fireHierarchyActionEvent(ThreadedTree.java:542)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree.executeStandardOperation(ThreadedTree.java:2264)
     at com.sap.aii.utilxi.swing.framework.navigation.tree.ThreadedTree$DblClickHandler.mouseReleased(ThreadedTree.java:2196)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.AWTEventMulticaster.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at com.sap.aii.utilxi.swing.toolkit.Guitilities$EventProcessor.dispatchEvent(Guitilities.java:319)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
Caused by: com.sap.engine.services.rmi_p4.P4RuntimeException: Unexpected exception.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:643)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:612)
     at com.sap.engine.services.rmi_p4.reflect.P4InvocationHandler.invokeInternal(P4InvocationHandler.java:160)
     at com.sap.engine.services.rmi_p4.reflect.AbstractInvocationHandler.invoke(AbstractInvocationHandler.java:52)
     at $Proxy62.read(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.engine.services.ejb3.runtime.impl.StatelessRemoteStubInvocationHandler.invoke(StatelessRemoteStubInvocationHandler.java:89)
     at $Proxy63.read(Unknown Source)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
     at java.lang.reflect.Method.invoke(Unknown Source)
     at com.sap.aii.ib.clsif.login.BeanProxy.invoke(BeanProxy.java:114)
     at $Proxy63.read(Unknown Source)
     at com.sap.aii.ib.clsif.oa.ObjectAccess.read(ObjectAccess.java:101)
     ... 40 more
Caused by: java.io.InvalidClassException: com.sap.aii.ib.bom.condition.xi71.parser.impl.ConditionParserImpl; local class incompatible: stream classdesc serialVersionUID = 1, local class serialVersionUID

Thanks! Abinash
We applied all the patches listed above, however the issue still exists.
Actually the issue started when we applied the patches initially and even after getting the latest patches the issue still exits same as mentioned above:
When we try to click open any of our Integration Processes / BPM s we get the unexpected error while executing open.
Please, do let us know if anyone has faced similar issue and how it could be resolved.
Regards,
Vemul
Edited by: Parikshit Vemul on Jul 30, 2010 11:34 PM

Using Error Message in BPM Error Handling Branch

Hello,
I closed the old BPM thread not to mix up different questions.
As I found out now a synchronous Send Step with Eror handling branch is working fine to directly handle errors.
As in the send step there could be several errors possible, e.g. XML validation fails, error in communication channel etc.
Is it possible to have access to the error message that can be seen in monitoring and use this as input parameter for message mapping for example?
Would be helpful because otherwise I just would be able to send back a generic error message to the sender.

Hii Florian,
Adapter module can only provide information about the failures in Adapters.
But other failures like XML Validations, can be informed depending on the mode of Validation.
As per help.sap.com
You can perform the structure check at the following points in PI message processing:
● Validation in the sender adapter
If the sender adapter has created the PI message, you can then perform the validation of the PI payload. If the structure of the payload differs from the definition of the data type provided for comparison, message processing is stopped. The adapter sends a synchronous response to the sender of the message, informing it about the structure error. The industry-specific adapters inform the sender asynchronously, as required by the RNIF protocol and the CIDX protocol.
● Validation in the Integration Engine
In inbound and outbound processing, *validation of the PI message payload takes place as a pipeline step *of the Integration Engine. If the structure of the message payload does not match the saved definition of the data type, an error description is generated. The error description contains status information and a list of all structure errors. Message processing is stopped. The message is set to error status and an error report is saved.
If validation takes place in the Integration Engine, the sender of the message is not automatically informed of the structure error. The message is set to error status and an administrator can process the message further using the Runtime Workbench.
So if you use XML Validation in Sender Adapter you can get back the Exception ( i think you need to do some java mapping here). Else if you are using Integration Engine, then alerts are there for them.
Anyway this discussion has opened a lot of To Be Explored area for me. I will keep looking for them.
Regards
Suraj

BPM Error Permanent Error in BPE inbound processing

Hi
I require some urgent help on this BPM issue.
We are trying to integrate SRM PO being directly sent to Vendors using HTTP. We are getting an error saying Permanent Error in BPE inbound processing. The scenario works like this.
SRM system would sent PO using the SRM Standard interface PurchaseOrderRequest_Out. We need to transform the message into cXML format and send it to the vendors using HTTP adapter. Using the HTTP response we need to trigger an email to the business process team.
The SRM interface is under the software component SAP SRM Server 5.5 and our mapping is being done in a common software component and for the vendor interface we have another software component. We have created a relationship in the SLD by making the common SWC as dependent software component to SAP SRM Server and Vendor Software Component. So in the integration repository we are able to get the interfaces for the SAP SRM Server and Vendor Software Component under the common software component. The receive step for this BPM is a copy of the standard SRM interface PurchaseOrderRequest_Out(as the standard interface is an asynchronous interface) and we would require an abstract interface for the BPM. We have checked the semantics for the BPM and its fine. The related ID development is in place. When the message is being triggered, it gives us this above mentioned error. When we go to the QRFC monitor we are able to check the details.
Regards,
Indranil

Hi Indranil,
     You don't see you BPM....
First go to SXI_CACHE and check that your BPM is listed there and that the compilation has been completed succesfully.
Is this the first time the BPM is being used? If so check if has been configured. For example, go to RWB->Component Monitoring->BPE in <SYSID>
and check if any error is listed there.
In order to check what is going on in your BPM you can trace it:
                  SXMB_MONI_BPE->Diagnosis Processes with Errors
                  SXMB_MONI->Process, get your msg and click on 'PE'. You should see the workitems and see if there is any error.
         Hope this helps you....
         Regards,
            Encinas.

BPM error:Container element in step transformation is not initialized

Hello Experts,
I am new to the concept of BPM.
I'm trying to create an integration process in which I'm taking an Idoc and processing it in many ways. The process contains many transformation steps. There two such transformation steps which have been placed in block step in a fork. And i get this error: Container element XXX in step transformation is not initialized
What could be the problem?
Regards,
Akhil

Hi
if u are getting the messaga with red sigh then it means it will craete the error while running the scenario.
but if it is in blue then i think it will not create any error.
the meaning of that statement is that the container u have defind is not used anywhere. it is just giving u a warning message.
Thanks
Rinku

BPM Error: Synchronous Send Step

Hi All,
I am getting the below error in the synchronous send step of my BPM.
Interface urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
I am trying to send a query and get data from a table in this step. I have an abstract synchronous interface attached to this step and I have an inbound synchronous interface at the configuration side as the receiver for the BPM sync. interface.
The errored out interface is the abstract interface used as the response message at the BPM sync step.
Does anyone has encountered this before?
additional error info)(
Work item 000000364714: Object CL_SWF_XI_MSG_BROKER method SEND_SYNCHRON cannot be executed
Message no. WL821
Diagnosis
The calling of the object method for the work item ended with a return value for which no handling is modeled in the workflow.
System Response
The work item was forced into the error status.
Procedure
Refer to your workflow system administrator.
Procedure for System Administration
Also check the binding between the task container and the method container.
Appreciate your help!
Regards,
Shiny

Hi,
e urn:Haworthinc.com:India_Tax SIAA_IndiaTax_DBSelect_TICUSEXT has multiple operations
Are u using 7.1 versin of PI, if so can u check if u r consistently using operation name in interface
Babu

Regarding BPM Errors

Similar Messages

Maybe you are looking for