Regarding Business Connector Exercises

Hi all
I need some excrcises on Business Connector ..
specially on BC to XI migration Strategy ....
Any link apperciated....
Thankx

Hi Nagsen,
Hope this link on SAP help can help you,
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/ed/319640c80b3528e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/61/4193404f673028e10000000a1550b0/content.htm
Regards,
bhavesh

Similar Messages

Regarding Business Connectors

Hi Experts!
I need your urgent help regarding Business Connectors. I am starting a Project in BC. So if you can help me out with that.
1. How to convert Idocs to idocs XML and Back to IDOc again.
2. How to convert BAPI to BAPI XML and Back to BAPI again.
3. How to configure Business Connector.
Thanks in advance.
jawad
POINTS WILL BE AWARDED****

just rely for help

Regarding Business Connector

Hi all,
I am new to Business Connector. I was asked to develop a scenario wherein I need to send an iDoc from SAP, convert it to the standard EDI format (EDI 850, 856 and others) in XML format and FTP that to an FTP Server.
As of now, I configured BC and SAP systems so that when I send iDoc from SAP they are received at BC. I am able to see this in the routing screen of BC Server.
But how to convert this to EDI Format? As of now, I am using the PO (Message type ORDERS) to EDI 850 format.
Thank you.

Please see my response in the other post and close one of the two as they address the same issue.
Srinivas

Regarding Business connector Excercises

hi all
Good Morning
Can Anybody give BC excercise material provided by SAP
BIT400, BIT530,BIT531
Thanx in advance

Please see my response in the other post and close one of the two as they address the same issue.
Srinivas

Business Connector Example

Hi all !!
Can yoy provide me with sam examles, how to use BC ??
(i have connected it to MSSQL and now i need to upload some data from it to sap using ABAP program). What should be done to achive that ??
BR, Jacek

Refer these links:
Business connector
SAP Business Connector
Regarding Business Connector Exercises
Regards,
Ravi

[Business Connector] JCo

Hi all,
I have the following problem regarding Business Connector issuing IDoc for a SAP Backend system to process.
Since BC is waiting for the complete integration of the IDoc to send the next one, the process is quite long !
Thus, I had several questions regarding Business Connector :
1) Does Business Connector necessarily rely on JCo to connect to SAP Backend systems or is there another way ?
2) If yes, is it possible to configure pooled connection instead of direct connection as it seems to be the default behaviour
3) Has anyone experiences multiples connections to the same SAP Backend system from one instance of Business Connector ?
4) Is this possible to configure SAP Business Connector in order not to wait for the complete integration ?
5) Is this possbile to configure ALE in order to only issue a receipt confirmation to SAP Business Connector (with the purpose to fasten the whole process) ?
Thanks for you help!
Best regards,
Guillaume

Hi,
1)SAP Business Connector is a SAP native Message Server.
SAP JCo is native Connector from/to R/3 to/from the Java world.
SAP Java Resource Adapter is a Connector which currently applies to JCA 1.0.
2) neither SAP Business Connector nor SAP JCo meets JCA specifications.
regards,
Eugen

Business Connector - XML to SAP using BC

Hi,
      This is regarding business connector(BC).
    The IDOC details are successfully converted to xml file to send third party system using BC..
          But also I need the process for vice-versa ..
              The data will be coming as xml data from third party system and these data need to be updated into the corresponding SAP fields.
       Can you plz tell me whether any RFC's or other methods to be used?

HI
please can u provide me the steps how to convert idoc to XML and send as HTTP

SAP Business Connector on Windows XP

I've been trying to get the SAP Business Connector 4.7 to work on Windows XP professional but haven't been very successful. The business connector seems to install okay, but when I try to start the business connector through the server.bat file it generates the following errors:
(loglevel = 4)
Loading WmPartners package
00000E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.EmailTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.EmailTransport
00000F [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:saveMessage: [B2BSERV.0026.9106] No method saveMessage in class wm.PartnerMgr.xtn.admin
000010 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:view: [B2BSERV.0026.9106] No method view in class wm.PartnerMgr.xtn.admin
000011 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:saveRoutingRule: [B2BSERV.0026.9106] No method saveRoutingRule in class wm.PartnerMgr.gateway.admin
000012 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:convertWildCards: [B2BSERV.0026.9106] No method convertWildCards in class wm.PartnerMgr.gateway.admin
000013 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.B2B:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.B2B
000014 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:editStore: [B2BSERV.0026.9106] No method editStore in class wm.PartnerMgr.xtn.admin
000015 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.FTPTransport:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.FTPTransport
000016 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:invokeViewService: [B2BSERV.0026.9106] No method invokeViewService in class wm.PartnerMgr.xtn.admin
000017 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:viewMsgContent: [B2BSERV.0026.9106] No method viewMsgContent in class wm.PartnerMgr.xtn.admin
000018 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:updateTransports: [B2BSERV.0026.9106] No method updateTransports in class wm.PartnerMgr.gateway.admin
000019 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.admin:invokeService: [B2BSERV.0026.9106] No method invokeService in class wm.PartnerMgr.gateway.admin
00001A [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.xtn.admin:log: [B2BSERV.0026.9106] No method log in class wm.PartnerMgr.xtn.admin
00001B [B2BSERV.0028.0005] Loading SAP package
00001C [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.RFC:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.RFC
00001D [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.BAPI:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.BAPI
00001E [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.XML:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.XML
00001F [B2BSERV.0026.0002] Failure while loading service sap.bapi:encodeToFile: [B2BSERV.0026.9106] No method encodeToFile in class com.wm.pkg.sap.bapi.BusinessDocumentCoder
000020 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2rfc: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000021 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:rfc2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000022 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:bapi2ale: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000023 [B2BSERV.0026.0002] Failure while loading service sap.admin:listGatewayServices: [B2BSERV.0026.9106] No method listGatewayServices in class sap.admin
000024 [B2BSERV.0026.0002] Failure while loading service sap.bapi.Mapper:ale2bapi: [B2BSERV.0026.9104] Missing class sap.bapi.Mapper
000025 [B2BSERV.0026.0002] Failure while loading service wm.PartnerMgr.gateway.transport.ALE:startup: [B2BSERV.0026.9106] No method startup in class wm.PartnerMgr.gateway.transport.ALE
000026 [B2BSERV.0028.0005] Loading WmSamples package
000027 [B2BSERV.0028.0026] Warning: Deprecated service type (webtap) in service sample.webtap:logApp in package WmSamples
000028 [B2BSERV.0028.0005] Loading WmDB package
These errors don't stop the business connector from starting up, but the errors are not normal behaviour. When I try to start the business connector through a Windows service then I get the message "Could not start the SAP Business Connector Service on Local Computer. Error 126: The specified module could not be found".
I have a working business connector installation on a Windows 2000 server, and when I checked the error log of that installation I noticed that it had logged the same errors about the 'WmPartners' package. It on the other hand didn't have any problems loading the 'SAP' package.
I tried installing the business connector on two different systems with identical results. Has anybody been able to get the business connector to work on Windows XP?

HI,
I have no idea clearly about BC.. but ..
See the following links.. may be helpfull..
Business connector
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8609b90-0201-0010-c6bc-a41b611c6dac
SAP Business Connector on Windows XP
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92e5bd90-0201-0010-b799-dfdc27f3100a
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a8424011-0d01-0010-e19d-e5bd8ca52244
If usefull .. points rewarded..
Regards
Chilla..

How do we Integratet SAP to Non-SAP Using Business Connector

Hi Experts,
I am new to SAP Business Connector !!
and what are the Forms ? for SAP Business Connector Related Postings ??
!! I have a requirement to integrate sap to non-sap with Business Connector !!
We need to Generate the SAP Data In xml Format ? and the Non-sap System can Understand Only XML Formated data.
Is there any way Business Connector Box can Pull the XML file from R/3 Application Server and store the file in the Business Connector Server. from that How do we Sent XML file to Non-sap. How do we Integrate ??
what transaction code will trigger this event ? I mean is ther any SAP Transaction Code to Integrate Business Connector?
For Eg. like in R/3 SD to FICO and MM Integration.
Please Give your Valuable Suggests..
Thanks .
Upender.

Hi,
It is not an issue, It will be a separate project :-).
The right forums for this,
Expert Forums » SAP NetWeaver » Process Integration
www.wmusers.com
Also go through the following links:
http://www.sapgenie.com/interfaces/businessconnector.htm
http://www.sapgenie.com/mysap/bus_connector.htm
/people/bla.suranyi/blog/2006/07/10/xi--sap-business-connector-integration-using-the-http-adapter
http://help.sap.com/saphelp_nw04/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
http://www.thespot4sap.com/Articles/SAP_XML_Business_Integration.asp
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b4f3755a-0401-0010-b6b3-9b65bb7d4503
https://websmp104.sap-ag.de/connectors
Thanks and Regards,
Chandra Madapati

RFC Error while trying to access function module from business connector

Hi,
I am getting the following RFc exceptions in BC server when we invoke the service pub.sap.client:invoke fail as a flow step in Idoc_Status_Add(this service is calling a function module in sap namely ZYBC_IDOC_STATUS_ADD_FROM_BC which Adds status to Idoc (from Business Connector).But no trace of failures are recorded in sap side
except 1: rfc_failure in BC trace files under monitoring.I need to know the root cause of these errors as the same services have run finely later and IDOCs were also processed successfully without any problem.
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: See RFC trace file or SAP system log for more details
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.nativeExecute(Native Method)
at com.sap.mw.jco.rfc.MiddlewareRFC$Client.execute(MiddlewareRFC.java:1217)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3684)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3129)
at com.wm.pkg.sap.rfc.SAPSession.invoke(SAPSession.java:437)
at pub.sap.client.invoke(client.java:297)
at java.lang.reflect.Method.invoke(Native Method)
at com.wm.app.b2b.server.JavaService.baseInvoke(JavaService.java:281)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.BaseService.invoke(BaseService.java:140)
at com.wm.lang.flow.FlowInvoke.invoke(FlowInvoke.java:292)
at com.wm.lang.flow.FlowState.invokeNode(FlowState.java:559)
at com.wm.lang.flow.FlowState.step(FlowState.java:430)
at com.wm.lang.flow.FlowState.invoke(FlowState.java:400)
at com.wm.app.b2b.server.FlowSvcImpl.baseInvoke(FlowSvcImpl.java:1786)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:709)
at com.wm.app.b2b.server.ServiceManager.invoke(ServiceManager.java:496)
at wm.server.net.EmailTransaction$RunService.write(EmailTransaction.java:1375)
at wm.server.net.EmailTransaction$RunService.run(EmailTransaction.java:1218)
at com.wm.util.pool.PooledThread.run(C:/NT/Perforce/basis/4.1.0-terra/module/core/source/com/wm/util/pool/PooledThread.java:103)
at java.lang.Thread.run(Unknown Source)
could anyone throw light on how this kind of error can be resolved and why it occured?
Thanks.

What does the RFC trace file and log say? Has there been any dump on the SAP server? Check the logs and transaction st22 in your SAP system to see if the RFC-module has dumped.
My guess is the problem is in the RFC-module, I think you should start looking there.
regards,
Dionisios

Flat File Transfer from SAP R/3 4.7 to SAP Business Connector 4.8

Hi Experts,
I have a requirement of transferring a flat file from my R/3 SAP 4.7 Box Application Server to the Business Connector 4.8 Box. I am new to SAP Business Connector and I am not to sure whether FTP works if I use a shell script in SAP R/3. Also, is there any way Business Connector Box can pull the file from R/3 Application Server and store the file in the Business Connector Server.
Any help will be appreciated!!!
Regards,
Subhhrangsu

Hi,
There are many ways thru which you can pass document to SAP BC:
You can HTTP, FTP, Email document to SAP BC.
SAP BC has predefined services for all of them.
For FTP document to SAP BC:
1 Initiate an FTP session on SAP BC Serveru2019s FTP listening port ( this can be found out from SAP BC administrator or from SAP BC homepage).
2 Point to the directory that contains the service to which you want to pass the XML
document.
Example cd \ns\Purchasing\SubmitOrder
3 Copy the XML document to this directory using the following command:
put XMLDoc.xml
Where XMLDoc.xml is the name of the file that you want to pass to SAP BC Server.
Example put PurchaseOrder.xml
Above code can be written in a batch file and you can schedule it to run at interval of minutes.
You can write java client program as well to upload file and map it to String variable of Flow service of SAP BC.
As Micheal said, you can look at sapbc/Developer/doc folder to look for more options.
Best Regards,
Divyesh

RFC function callls a SAP Business Connector Flow - only upper case

Hi everybody,
I wrote a function in SE37 which is calling a Flow in SAP Business Connector.
R/3 and SAP BC, both are Non Unicode systems.
The export parameter is TYPE makt-maktx.
The call to SAP BC works fine. Only all the text I can see in the pipeline of SAP BC is upper case.
I checked wether the domain of the makt-maktx allows case sensitive texts.
This is OK.
I have no idea how I can tell SAP BC to receive case sensitive texts.
I checked the forums. Seems nobody had such a problem.
Can somebyody help?
Best regards
Jochen
Hi to all,
it was not the JAVA Version, or a bug or whatelse.
I just ingnored while testing in SE37 that there is
a Flag [X] case sensitive - That's all!
Shame on me!
Greetings Joe
Message was edited by:
Jochen Seeliger

Hi Priya
Seeing the messages, it appears that server is down.
"java.net.ConnectException" occurs whenever you try to connect to a system which is not up and running.
cheers
Sameer
PS: Please award points if you find the answer useful

Error message when calling a Business Connector RFC destination from SRM

Hello all,
We are facing one problem with data Purchase Order transmission between SRM 5.0 (SRM_SERVER 5.5, extended classic scenario) and Business Connector 4.7.
We made needed customizing in order to have "XML / XI" output medium available in tab 'Company Data' in "Manage Business Partners" web transaction (by updating BBP_USE_AI table in SM30 transaction).
Then, we implemented BAdI definition BBP_EBPXML_OUT_BADI with method PURCHASEORDER in order to change XI system type to Business Connector.
In this way, PO transfer data between SRM and BC is done using BC Module Function BAPI_POEC_XML_SEND (TCP/IP RFC connection was defined for Purchase Order in BBPC_RFCDEST table).
Nevertheless, even if method BBP_PO_SEND_XML is correctly triggered when PO is created with a vendor with XML output medium, we have in the document output log ("Process Purchase Order" web transaction) an error message:
' Error (Unknown Partner and Message Type. Routing Rule created. Sender: SMR Receiver:) when calling RFC destination BC '
where SRM is the SRM log. sys. and BC the Business Connector log. sys.
Our EAI team is working on it, but if you have any idea, your are welcome !
Thank you in advance.
Regards.
Laurent

Hello Christian,
Thank you for your help. However, we abandoned this solution between SRM and Business Connector.
So, we followed instructions indicated in OSS note 883693 - "ECS: PO output determination in R/3".
Nevertheless, in order to restrict this behaviour for specific vendors and purchasing organizations, we added some filters.
It is working fine.
However, when the PO is modified in SRM, then order again, PO is modified in R/3 (by the RFC user from SRM) more than once.
As a consequence, we have as much messages as modifications of the order in R/3 (due to multiple RFC access with the SRM RFC user).
Does anybody have an idea to have only one R/3 output message when the PO is modified in SRM ?
One solution could be to check in the NAST table if the time creation of the last output message is lower than, for example, one minute.
If it is the case, we do not allow R/3 ouput message.
Any suggestions is welcome.
Regards.
Laurent.

HTTP POST / SAP Business Connector 4.6

I'have written my message in forum XI which is better location for this subject.
Message was edited by: Vincent BLOHORN

Hi Ganimede,
I'm not sure if 4.6 is (should be) but 4.8 is definitely UC compatible.
Please follow these links:
[Connectors @ SAP overview page|http://service.sap.com/connectors]
[SAP Business Connector (SAP BC) Documentation|http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000719330]
Regards,
Martin Fuchs
SAP AG

Query Related to Business Connector

Hi,
I'm currently working on Business Connector, which is new to me. I am going through the reference documents to understand the working of the same. However, the requirements have started pouring in.
As of now, I have the follwoing requirement.
I've a SAP Function Module say "Z1234" which is RFC enabled. To this FM, all export paramets which are passed are FIELDS, none are table(s).
Now what i require is to fetch this data into Business Connector by writing some code in Business Connector whose FRONT END is JAVA.
Can anyone in here help me to achieve this requirement?
Suggestions welcomed.
Thanks & Regards,
Rajesh

HI,
I think Scenario based is better
1) It's more reasonable to manage your documentation with the business process since they are quite related
2) I suggest that you use the check out /check in functionnality to prevent the modification from multiple users at the same time
3) As the changes happen some time, which means you have to maintain the related document often, it would be a good idea to use the link but not the copy of document
4) In most case, i would insert documents of various types in different tabs like Trainning materials, project documentation, test in SOLAR02
5) What's more, if all your user guides are uploaded to the Trainning material tab, you will be able to use the existant documents to supply the SOLAR_LEARNING_MAP, which in my opinion, simplifies a lot the tranning session of any global-rollout
Jiamin Pan

Regarding Business Connector Exercises

Similar Messages

Maybe you are looking for