Regarding Business System For HTTP Receiver Adapter.

Hi Everyone,
 Which Type of Business System do I need to select For defining HTTP Receiver Adapter.
I am doing File to Http Scenario. What will be my output look like, If i am Sending file as
<?xml version="1.0" encoding="UTF-8"?>
<ns0:MT_Source_FILE xmlns:ns0="http://city.net/FILEtoHTTP">
 <Message>
 <Id>123456</Id>
 <Head>
 <Id>123456</Id>
 <Filename>sample.xml</Filename>
 </Head>
 <Body>hello</Body>
 </Message>
</ns0:MT_Source_FILE>
Regards,
Varun

Varun,
You can use third party Business system or else you can use Business sevice also.
Take a look at these blogs,
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
Yuga

Similar Messages

Dynamic URL for HTTP receiver adapter

Hi all,
when the XI send the http request to the target system, the format maybe like this:
header + body the body is including: Prolog, payload and Epilog
here is about the target system have a 'input' parameter(maybe string type)
is it possible to pass the 'head + body' these value(or maybe the whole http request message) into input
i mean is it possible to set the dynamic URL for http receiver adapter like this:
http://host:port/path?input=<the header and body>
i have searched the blog Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Link:[/people/william.li/blog/2006/04/18/dynamic-configuration-of-some-communication-channel-parameters-using-message-mapping]
and the similar threads in the forum
please give me some advice
thanks in advance

When a HTTP server requests the whole message as URL parameters, then I assume that the server also requests an HTTP GET, which is not supported by XI.
Could you check this?
Regards
Stefan

Remove namespace alias for HTTP receiver adapter

hello all,
I have a scenario, IDOC->XML (HTTPS). Standard output of PI has ns0: as prefix for each xml tag (ns0 alias for namespace)
I want to remove the namespace alias while preserving the namespace in the output. So removing namespace reference in external definition is not a option.
Is there any way to use XMLAnonymizerBean for HTTP receiver adapter? What are other alternatives (java mapping)?
Thanks,
sachin

Thanks stefan, prateek.
Prateek: I checked this blog earlier. It talks about inbound processing. My scenario is outbound HTTP and I am not sure how I can use specific adapter service as mentioned in blog in outbound case as other scenarios are using standards adapter_plain service.
Stefan: I will try this approach.
regards,
sachin

When i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"

Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
Q1: I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
Q2: The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
1.Builder for Integration Repository
2.Builder for Integration Configuration
3.System Landscape Directory
4.Runtime Workbench
5.Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
Q3: The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li

Hi! I need steps for HTTP Receiver adapter

My scenario is like this:
HTTP(HTTP Sender adapter)->XI->File(File adapter).
For this Iam sending the data as payload in the body of HTTP. Now What am i going to do is the opposite of above scenario:
File(FileAdapter)->XI->(HTTP Receiver Adapter)HTTP.
I would like to know what are the steps to transfer a file(xml) from File adapter to XI and from there to Http.
How to send the data using File adapter. Please suggest me some steps.
Hoping a quick response!!!
Thanks in advance!

Hi Datta,
For a HHTP -> XI -> FILE Scenario:
DESIGN:
1. Create DataTypes for source and Destinations. Create elements for all the text fields of your HTTP Client so that they can all be mapped into the destination file
2. Create MessageTypes for the two datatypes.
3. Create Message Interfaces. The One for HTTP is the sender, Asynchronous ( as no response is expected) and one for File is receiver, asynchronous.
4. Do the mapping. It will be mostly a one to one mapping of the fields.
5. Create the Interface Mapping.
Configuration:
1. Import your Business System under your Configuration Scenario.
2. Create 2 communication channels. One for Http as a sender and one for File as a receiver.
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
3. Do the Receiver Agreement for file. HTTP doesnt need a sender agreement.
4. DO the Receiver Determination and Interface Determination.
Weblog which talk about the same scenario:-
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
(use case) and explained it...
Check this SDN tv demo, it has detail of HTTP adapter setup.
https://media.sdn.sap.com/SDNTV/main.asp?mediaId=107
Refer to this link for adapter settings.
http://help.sap.com/saphelp_nw04/helpdata/en/0d/5ab43b274a960de10000000a114084/frameset.htm
You should also have a HTTP client to send message to XI. In the connecting parameters to XI u have to use the URL in the pattern mentioned by Alex. U have to give all the configuration details in the URL.
Regards,
Abhy
Message was edited by: Abhy Thomas

Steps for http receiver adapter communication channel

Hi
can you please specify steps for http receiver communication channel?
thanks
Prasad

Hi Prasad,
Here's the documentation for configuring the http adapter in the communication channel(rcve):-
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/frameset.htm
Regards,
Sushumna

Envelop header for HTTP receiver adapter

Hi,
In one of the business scenario's XI has to send data to an external party using an envelope header(Sample document to be sent is given below.)
Message-ID:ABC.JavaMail.SYSTEM@ztxwmwspro02
Date: Thu, 16 Oct 2003 17:02:04 -0400 (EDT)
Mime-Version: 1.0
Content-Type: multipart/related
Content-ID: 4bafd2e2-7971-1000-a6a3-0fe8304d0001
x-Date-Sent: 01 Dec 2005 11:26:47 CST referenceId:
x-Document-Type: Error
x-Priority: 5
x-Correlation-Id: 4bafd2e2
x-Request-Annotation: normal
<Order>
<OrderHeader>
 <OrderNumber>
 <BuyerOrderNumber>XXX</BuyerOrderNumber>
 </OrderNumber>
 <OrderIssueDate>20050223T12:00:00</OrderIssueDate>
<OrderHeader>
<Order>
1) How can this be acheived?
2) How/Where can i see the header data of the message that is being sent out by a receiver HTTP adapter?
Regards,
Siva Maranani

hi Siva,
Did you see this link ??
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
it provides good information aboutPlain HTTP: Outbound Channel.
cheers,
Naveen

Multiple Business Systems for Multiple Receivers?

hi,
idoc > xi -> multiple receivers with xml payload
I have a scenario where i have to configure multiple receivers for each Supplier from an IDOC. All the receivers will be either HTTP or SOAP.
When the mapping would be the same for all the Suppliers but during configuration we have to determine the receiver based on an IDOC value to route the xml via HTTP or SOAP
For this to achieve do we have to create multiple business systems for each receiver?
If i create a receiver in the business service how can we determine the interface mapping in this scenario?
Thanks,
Tirumal

Hi Tirumal,
For this to achieve do we have to create multiple business systems for each receiver?
As you know,Business system is a logical name for the Techincal Systems, Theoretcially it is not required to create different Business systems for the each receivers.
Generally Business Systems are grouped/created based on the Business Process/Functionality/Type of Receivers etc.
So if you think, your each receiver is of type different type/process then create different Business systems.
It depends~
If you create Business Service, then you need to add your Message Interfaces explicitly into the Business Service( By open the Business Service->You can see the Sender/Receiver Interface tabs).
Hope this helps,
regards,
moorthy

HTTPS Receiver Adapter POST with FILE TYPE parameter

Hello,
I need to do a POST to a URL service that validates content of a file. It receives user and password as string parameters and a FILE as a mime type parameter.
I'll appreciate any help.
Regards,
Diego.

Hi.
Using Http Receiver Adapter , you can try out this.
This blog may give some idea-
/people/amol.joshi2/blog/2006/06/28/must-fire-a-http-get-from-xi---try-this
Otherwise, try out with callinng this service via SOAP Adapter i.e webservice.
Rgds,
moorthy

Regarding Http Receiver Adapter Details.

Hi Everyone.
When do we use http Receiver Adapter?
I want to configure File to HTTP Scenario.
For Receiver Adapter, What should i Specify Addressing Type .If I select the URL Address
What I need to give values for Target Host, Service Number, Path and Similarlly If I select Addressing Type as HTTP Destination, What I need to give value for HTTP Destination.
Regards,
Varun

Hi,
check this blog
Push Data to MVC Architectured application using XI
XI - SAP Business Connector integration using the HTTP adapter
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/79973cc73af456e10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/43/64dbb0af9f30b4e10000000a11466f/content.htm
CSV File Lookup With Http Request and Response in XI
Dynamic Configuration of Some Communication Channel Parameters using Message Mapping
Regards
vasu

Can HTTP Receiver adapter be used for Sync Comm. Pls advice urgent

Hi All,
I have some data present in XI.
I need to send the data present in XI to System A through HTTP adapter in synchronous manner means that system should send response back to XI.
Can HTTP Receiver adapter be used for Sync Commumication in my scenario.
Please send blogs/link for it
Regards

Hi Henry,
>>I have some data present in XI.
In what form it is available on XI(e.g., IDOC or RFC or File etc..)?
First let us know this.
Thanks,
Gujjeti

HTTP receiver Adapter configuration

Hi All,
I want to post an XML message using HTTP Receiver Adapter for my BPM scenario (Idoc to HTTP service)
The receiver has Oracle gateway and it expects message in following format.
HTTP Header
 HttpVersion: HTTP/1.1
 Authorization: Digest username=myusername,
 realm=[email protected],
 nonce=dcd98b7102dd2f0e8b11d0f600bfb0c093,
 uri=/dir/index.html,
 qop=auth,
 nc=00000001,
 cnonce=0a4f113b,
 response=6629fae49393a05397450978507c4ef1,
 opaque=5ccc069c403ebaf9f0171e9517f40e41
 Contentlength: 12345
 Contenttype: text/html
HTTP Body
 TRANSPORT_PROTOCOL=OXTA
 TRANSPORT_PROTOCOL_VERSION=1.0
 REQUEST_TYPE=SEND
 MESSAGE_ID=A1234567890ZZ0987654321
 MESSAGE_TYPE=XML
 MESSAGE_STANDARD=OAG
 TRANSACTION_TYPE=PO
 TRANSACTION_SUBTYPE=PROCESS
 DOCUMENT_NUMBER=12345
 PARTYID=9999
 PARTY_SITE_ID=8888
 PROTOCOL_TYPE=HTTPSOXTA
 PROTOCOL_ADDRESS=HTTPS://www.me.com/servlets/oracle.ecx.oxta.
 transportAgentServer
 USERNAME=myusername
 PASSWORD=myloginpassword
 ATTRIBUTE1=
 ATTRIBUTE2=
 ATTRIBUTE3=
 ATTRIBUTE4=
 ATTRIBUTE5=
 PAYLOAD=<xml ... ...>
I think this is not a typical HTTP URL type of format, is it?
And I am not sure how I can build the message. Where do I put the parameters like TRANSPORT_PROTOCOL, TRANSPORT_PROTOCOL_VERSION, REQUEST_TYPE etc in the HTTP adapter?
Also is there any place where I can see the final actual XI message that is sent to HTTP service?
Any help will be really appreciated.
Thanks and regards,
Rahul.

Hi Rajeev,
The receiver system should have the details about the content type it expects. I got that from the team who monitors our receiver system.
The HTTP Body of HTTP adapter is made up of PrologPayloadEpilog.
So I added the paramter list that receiver system expects as part of the Prolog. Refer to the HTTP body that I have posted in my earlier message. Out of that till ".....Payload=" is added to Prolog and XI then appends actual payload to it.
To be precise -
TRANSPORT_PROTOCOL=OXTA&TRANSPORT_PROTOCOL_VERSION=1.0&MESSAGE_TYPE=XML&MESSAGE_STANDARD=UNIVERSAL&TRANSACTION_TYPE=XXXE&TRANSACTION_SUBTYPE=ORDER_I&DOCUMENT_NUMBER=PO12345&PARTY_SITE_ID=ESAP_ORDER_I&USERNAME=***&PASSWORD=**&PAYLOAD=
So in the end it worked out well.
Cheers,
Rahul.

Adapter specific properties (http receiver adapter)

Hi,
does anybody know the technical name for the HTTP destination of a http receiver adapter.
The documentation lists only the names URLParamOne to URLParamSix and HeaderFieldOne to HeaderFieldSix.
Neither the technical name for URL nor for a HTTP destiantion are mentioned.
Regards,
Marc

Hello Moorthy,
I know this part of the documentation.
So I set the indicator within the communication channel.
Now, I have to fill the dynamic configuration during my mapping. My code looks like following:
DynamicConfigurationKey keyURL = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/HTTP", XXXXX);
// access dynamic configuration
DynamicConfiguration conf = (DynamicConfiguration) param.get (StreamTransformationConstants.DYNAMIC_CONFIGURATION);
// set value
conf.put(keyURL, url);
So what has to be filled instead of XXXXX ?
Regards,
Marc

HTTP Sender and HTTP Receiver adapter. Pls advice urgent

Hi All,
There is one Third Party that wants to send XML data and receive XML data with XI.
Please let me know can I use HTTP for that.
How to use HTTP Sender part?
How to use HTTP Receiver Adapter?
Pls send blogs/doc for that
Thanks and Regards

hi.,
Check this thread for the code for a HTTP Client,
/message/266750#266750 [original link is broken]
Also, check these blogs. They use HTTP adapters for their configuration,
/people/siva.maranani/blog/2005/05/21/jdbc-stored-procedures
/people/sriram.vasudevan3/blog/2005/02/14/calling-stored-procs-in-maxdb-using-sap-xi
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Check these links for the configuration part.
http://help.sap.com/saphelp_nw04/helpdata/en/43/64db4daf9f30b4e10000000a11466f/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/44/79973cc73af456e10000000a114084/content.htm
Weblog :
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - although this weblog is
aimed at explaining the sync-async bridge.. Sriram has taken http-to-file scenario as the example
note:reward points if solution found helpfull.....
regards
chandrakanth.k

HTTP Receiver Adapter payload as single line plain text with out any tags.

Hi PI experts,
I have a strange problem in http receiver adapter.
Sender RFC (SAP) Receiver: HTTP.
Receiver system expects the output from XI in the below format in a single line plain text with out any tags in the payload. and the content type should be application/x-www-form-urlencoded
Group=Test&Sentinel=Web%20Server&Facility=5345&Order Number=XT-XWHM-Y-NA&Serial Number=123456&@LABEL_QUANTITY=5&@LABEL_NAME=111114_Q
Is there any way to achieve this using http receiver adapter. Business is not ready to accept the output from XI not even in a single element instead they only need it as a JUST a plain text.
Appreciate early response on this.
Thanks in Advance,
Jitender

Dear Ola,
Could you elaborate how you achieved in catching the response data from the receiver in case of HTTP receiver adapter?
The target service is not a WebService but some python script that must to receive some paramters via POST request.
HOW can I post this parameters?
Here you entered the fields of the message type of the request in the header parameters of the receiver adapter? Thats fine.
But what about the message type and vice versa of the response from the receiver?
Regards
Rebecca

Regarding Business System For HTTP Receiver Adapter.

Similar Messages

Maybe you are looking for