Regarding callers information.
Hi BW Experts,
in production support, we got the error like process overdue(caller 70) . our doubt is in which table, this caller information will be stored ?
Regards,
Raju
Hi Raju,
whenever load fails with the error process over due,if load is successful up to psa, push unprocessed data packets manually or if load is not coming to psa and that too delta load , make the request red and delete.
Again ran the info package.
why this error occurs means if we set the ip run time , it exceeds the run time, obviously it showed the error process over due.
CALLERS information will be stored in RSMOCALLER Table.
Regards,
Chendrasekhar
Similar Messages
-
Hi Friends,
Pls can any one tell me , where information about all queries will be stored in bi server?
I had found some tables which will store the query information.
RSRREPDIR - Directory of all reports
RSZCOMPDIR - Directory of Reporting Components
RSZELTDIR-Directory of the Reporting Component Elements
Apart from above tables can we get data about queries anywhere else.
Thanks & Regards,
Ramnaresh .PDear Ramnaresh,
RSZELTDIR Directory of the reporting component elements
RSZELTTXT Texts of reporting component elements
RSZELTXREF Directory of query element references
RSRREPDIR Directory of all reports (Query GENUNIID)
RSZCOMPDIR Directory of reporting components
RSZRANGE Selection specification for an element
RSZSELECT Selection properties of an element
RSZELTDIR Directory of the reporting component elements
RSZCOMPIC Assignment reuseable component <-> InfoCube
RSZELTPRIO Priorities with element collisions
RSZELTPROP Element properties (settings)
RSZELTATTR Attribute selection per dimension element
RSZCALC Definition of a formula element
RSZCEL Query Designer: Directory of Cells
RSZGLOBV Global Variables in Reporting
Hope this helps..
Best Regards,
VVenkat.. -
Error Regarding Personal Information in ESS
Hello Everybody,
Here I am facing a problem related ESS iviews.We are having ECC6 and we installed ESS. I did all configurations of SLD (Post Installation) and also mantained JCO connections properly.I have done all settings related to HR.
Now all Iviews are working properly except Personal Information's iviews. Here I am getting error in Addresses , Bank Information, Personal Data. Error is :
Failed to process request. Please contact your system administrator.
[Hide]
Error Summary
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
Root Cause
The initial exception that caused the request to fail, was:
com.sap.dictionary.runtime.DdException: Type com.sap.xss.per.model.mac.types.Hrxss_Per_Subtype_Allowed does not exist
at com.sap.dictionary.types.mdi.util.ProviderUtil.createAbapTypeXmlMap(ProviderUtil.java:400)
at com.sap.dictionary.runtime.mdi.DataProvider.createSimpleTypeFromAbapType(DataProvider.java:587)
at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:287)
at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:94)
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:164)
Please help me out.I'll be highly thankfull as it is very urgent.(I'll reward points for sure)
Thanks and regards
NiveditaHello
In the IMG of the ECC you set up infotypes and subtypes that are to be used in the HR, both in the PA and XSS. Ask your HR consultant to check if the correct subtypes for XSS is configured:
Addresses
Bank Information
Personal Data
There could also be a mismatch of the support package leve. There are some restrictions of which SP level you can use regarding Portal, ECC (EA_HR and SAP_HR) and ESS. I.e the EA_HR and SAP_HR is too low and ESS is too high, some functionality will create errors. But first of all, check the subtypes.
Best Regardas
Kristoffer Engh -
Hi,
I got delivery number, how to get the vendor name and other details, it is shipping document.
Plese help it is very urgent.
thanksHi,
I guess it is an inbound delivery since you are talking about a vendor? Using the delivery number you will find the related purchase order in table LIPS field VGBEL. With the purchase order number you will find the vendor in table EKKO field LIFNR. Using this number details will be found in table LFA1.
Regards,
John. -
Change data regarding song information in iTunes not working,
Hey everyone, I was writing to see if anyone else was seeing this problem. I want to change the data on some of the music in my iTunes library and every time I attempt to do so it will not affect the songs.
Example: I wanted to add genre data to Random Access Memories so I select all the songs in the album. Right click and choose "Get Info." Go to the bottom and type in the genre information and click ok to confirm the change, but then after the dialogue disappears it does not change the song genre information at all.
Thank you for all the help.Morning SquatingCow,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
iTunes: Adding or modifying information about songs
http://support.apple.com/kb/ts2530
If it still doesnt work
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/ts1717
Best of luck,
Mario -
Regarding Table Information in PO Shipment Form
Hi All,
I have small doubt for table information
in Purchase Order Form, In Line--> Shipment Details Form
we have Promised Date, Needed By and Original Promise Date.
I got the information of Promised Date and Needed By Date information in po_line_locations_all table.
but I am not able to find the Original Promise Date information.
Please anyone can share this information.
ThanksWelcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>Announcement: Forums Etiquette / Reward Points
</ul>
Based on your question it sounds like you are working with the Oracle Enterprise Business Suite (EBS). If this is true, this forum is for general Forms questions. Please post your question in the General EBS Discussion forum. If you have a general Forms question, by all means, ask it here! ;-)
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
hi experts,
there is one table KNVP for customer master partner function..
i wud like to know is there any similar table for vendor master partner function..if yes then plz tell me the name of that table..
regards,
raman.Hi,
There is partner - vendor relationship table SPKR1.
Reward if Helpful. -
Hi Experts,
How to see the data source for a field in ecc and relavant infobject of that field in bi. If any one knows please let me know.
for example alebz, aworg fields belongs to which datasources in ecc and relavant io in bi to map them.
thanksHi,
RSOSFIELDMAP---to see the relavant infobject for R/3 field (Use this table BI side)
You can use help.sap.com to find the datasource name with R/3 fields
DD03L table will give you the table name if you input the field name.After that you can use where used list to find which all places that table is being used.
Hope it helps.
Regards,
AL: -
Regarding Upgradtion Information
Dear Guru
I just want to know that what are the things that are required when we upgrade the project from ECC 4.7 to ECC 6.0.
If anybody have some document and anythings regarding this plz send to me...
Thanks.
Moderator message - Please search before asking - post locked
Edited by: Rob Burbank on Jun 8, 2009 10:16 AMSachin,
click the ERP2005 Upgrade link in https://www.sdn.sap.com/irj/scn/wiki thread you will get all upgrade related info.
Thanks,
Syf -
Regarding Enterprise Informations System
Hello,
I developed a one sample JCA1.5 complaint adapter. For the development i used oracle database to check outbound communication and java socket program as EIS to send
message to adapter(inbound communication).
Now i wants to check with any JCA 1.5 complaint EIS. I tried many EIS(SAP,Siebel,Peoplesoft) but none of them provide a evaluation verison.
Please suggest me any EIS which provides an evaluation version ?
Is there any to get information about intefaces of EIS ?
Thanx in advanceYou can go for Compiere at www.compiere.com
-
SENDING MAIL, REGARDING CONTRACT INFORMATION TO MANAGER
HI ALL.
HERE I AM SENDING MY REQUIREMENT
MY CLIENT ASKING, IF EMPLOYEE FINISHES HIS/ HER CONTRACT ,THAT SHOULD GIVE PRIER INFORMATION TO HIS/HER MANAGER THROUGH MAIL GENERATION
FOR THIS WHAT ARE THE STEPS I SHOULD CONFIGURE.
Message was edited by: deviram tekumudiWell just a suggestion, Why can't we use Dynamic actions for the same.
The structure cud be something like this,
IT Subtype Field Name SNo. Step Var.Function Part
0019 End of BVMRK 01 P P0019-BVMRK='2'
Contract
0019 End of BVMRK 01 M M0001
Contract
Conclusion to be drawn:
If any change occurs in the status of that particular task then automatically system will fwd a mail based on the settings we have maintained in the feature M0001.
Kindly correct me if iam wrong...awaiting reply.
Best reagrds,
Vaishali -
please anybody tell me how to know the different tables in different modules
Moderator Message: Duplicate and unacceptable post.
Edited by: kishan P on Dec 5, 2010 6:37 PMThis post is very vague in nature.
Please be more descriptive of what you want to achieve. -
Hi,
Patch ID 8527948 for hyperion 9.3.1
While installing patch, i need to stop all the services or not.
Thanks,
PCHi,
My Issues are
1. From shared services i can't access Hyperion Planning. Whie am trying that showing "LOADING" for long time.
2. In workspace, under navigate I can't see the applications.
For this which are the pattch files to be update to my system.
Pls let me know the solutions
PC
Edited by: dwhpc on Aug 4, 2009 9:41 PM -
Regarding customer information
hi,
'sold to party', 'ship to party' and 'bill to party' are extracted from only one field kunnr.
how do i find that the kunnr i have is 'sold to party', 'ship to party' and 'bill to party'?
what other fields i might need to get the inforamtion?Hi
The below are fields for Partner Functions
Sold-to-Party:KUNNR(VBAK)
Ship-to-Party:KUNWE(LIKP)
Bill to party:KUNRE
Payer:KUNRG(VBRK)
Ramesh -
Adjusting an email regarding billing information
How do I adjust my Adobe Creative Cloud account settings to send the billing email to a separate e-mail other than my own while still maintaining control of the account so that I can continue to get the software info sent to me?
Shingler,
I would suggest you to contact Adobe Customer Services (Chat Support) by going to link below:
http://helpx.adobe.com/contact.html
-Mandhir
Maybe you are looking for
-
My music does not play in Creative MediaSource Player/Organizer
? In Creative MediaSource Player my music library is listed, but when I try to play a song (on the computer- not my ZEN Micro) I get an X and it doesn't play. The music is fine on my Micro. It seems there is a problem with the software, but I don't w
-
How to get a db connection from jdevelopers created db connections
How can you use the connection you create with jdevelopers wizard, to execute a simple preparedStatement in a custom class? After use, how do you return/disconnect it? con = ?? stmn = con.prepareStatement("SELECT first_name "+ "FROM customers "+ "WHE
-
Itunes crashes playing mp4 version 11.1.4.62
I imported an mp4 into itunes, Itunes seemed to import fine, but whenever I attemt to play it crashes, Quicktime can play fine. Can I use itunes to convert to another format that it likes better? any ideas? Thanks.
-
My install of Photoshop CC failed during download with the error message: ----------- Payload: Microsoft Visual C++ 2012 Redistributable Package (x86) 11.0.61030.0 {873BE68F-480F-49A6-9649-F98CAB056AFC} ----------- ERROR: Third party payload installe
-
hi, maybe sombody has a helpful hint here? I have an iBook G4, I've only had it since May. maybe April of 2005. just one day ago, the left arrow key (also marked "home") stopped responding. I can physically press the key just as always. Feels normal.