Regarding calling internationally
Good day,
Firstly, sorry if this is posted in the wrong section. I also couldn't find something similar to my problem.
Recently I bought a subscription to call to mobile/landlines in India and everything is working perfectly except for the fact that my girlfriend is also getting charged for the calls, is this suppose to occur? Is she paying for the connection fee? This is the first time I've bought a Skype subscription so I'm not sure as to how it all works. Your insight would be appreciated, thanks in advance.
Regards.
Solved!
Go to Solution.
Phadey wrote:
1. except for the fact that my girlfriend is also getting charged for the calls,
2.Is she paying for the connection fee?
Hello and welcome to the Skype Community!
1. ?? That's not possible. Only the caller is charged. The only possible explanation could be that she is located in a country which charges to receive inbound calls and she is being charged by her telecom carrier. She should check with them.
2. As you are using a Subscription to fund your calls there is no connection fee.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.
Similar Messages
-
Agents keep logging out after transferring a call internally
Guys,
I have an issue regarding the UCCX agent functions of transfeering call internally.
- Reported issue was one extension was not working
- The user did initial steps to correct the issue such as logging out of the cisco desktop agent clearing the phone and logging back in.
- The steps done by the user did not work
- I asked the user to log out and I unplugged the phone basically doing a hard restart
- After the restart I asked the user to log in again and it was working.
Any idea why the agent is going out of service everytime it transfer the call ot another agent?
Thanks,
ErikHi Erik,
Please post the Agent logs.
Thanks,
Anand -
Where is sign when you call international number, but first you call local number and after connect open keyboard and see that sign doesn't exist only 0
No that is not work. Try to call some number and when is connect click on keyboard and you can see that sign "+" doesn't exist.
So I use local number, when I'm connect I have option to call international number but like "+3193675xxxx" how I can put?
Before on iOS 6 I do it. -
Calling international cell phones
I heard there is an app where you can call an international cell phone for free, does anyone know about it, or is there anything like it?
Your best solution is either to find WiFi hotspots and use the Skype application for iPhone / Android to stay in touch.
If you use your 3G/4G then you will incur expensive data roaming charges with your operator (unless you have some international plan).
If you want to use Skype To Go numbers, it's only useful if you want to call internationally, so not too helpful for domestic calling within a country. -
Problem regarding calling a program from another program
Hi,
I have a requirement that i need to call a program from another program and in that case the called program should be executed with a value in the selection screen coming from the first program..i.e.
a standard report to view the user Notes for annual leave is RPTARQDBVIEW. Can we create a report to display all the users under a manager as a hyperlink and run the report(RPTARQDBVIEW), with the pernr of the employee selected
Regards,
saumikSubmitting a report using ranges for select-options
* Define range for ltak-tanum
RANGES: r_tanum FOR ltak-tanum.
* Read values from database tabel into the range
* These values are later used for select-options in the report
SELECT * FROM ltak
WHERE lgnum = w_lgnum AND "Warehouse number/complex
vbeln = w_screen1000-io_vbeln. "Transfer order number
MOVE ltak-tanum TO r_tanum-low.
MOVE 'I' TO r_tanum-sign.
MOVE 'EQ' TO r_tanum-option.
APPEND r_tanum.
ENDSELECT.
* Submit report with range
SUBMIT zmm00100 WITH p_tanum IN r_tanum.
or
Submitting a report from ABAP with selection criterias
TYPES: tt_selection TYPE STANDARD TABLE OF rsparams.
DATA: l_iblnr TYPE st_iblnr,
* Define internal table and work area for select-options
l_selection TYPE rsparams,
li_selection TYPE tt_selection.
* Create selectIon table
LOOP AT gi_iblnr INTO l_iblnr.
CLEAR l_selection.
l_selection-selname = 'IM_IBLNR'. "Option name
l_selection-kind = 'S'. "S= select options P=Parameters
l_selection-sign = 'I'. "Sign
l_selection-option = 'EQ'. "Option
l_selection-low = l_iblnr-iblnr. "Value
APPEND l_selection TO li_selection.
ENDLOOP.
* Submit report
SUBMIT rm07idif WITH SELECTION-TABLE li_selection AND RETURN.
Regards,
Prabhudas -
Hi experts,
Can any one tell what is call transformation used for and all also the use of 'id' given in the syntax below.
CALL TRANSFORMATION id
SOURCE (Internal table)
RESULT (XML string )
Thanks®ards,
Karthik.Form SAP Help:
Simple Transformations
Simple Transformations (ST) is an SAP programming language for describing transformations between ABAP data and XML formats. ST is restricted to the two modes of serialization (ABAP to XML) and deserialization (XML to ABAP) of ABAP data, which are most important for data integration. Transformations from ABAP to ABAP and XML to XML, like in the more general XSLT are not possible in ST.
In comparison with XSLT, the main advantages of ST programs are as follows:
ST programs are declarative and thus easier to read
ST programs only have serial access to the XML data and are therefore very efficient even with large data volumes
ST programs describe serialization and deserialization simultaneously - that is, ABAP data serialized in XML with ST can also be deserialized with the same ST program.
Simple transformations that can be called using CALL TRANSFORMATION must be in the repository. ST programs can be edited using the Transformation Editor. This is called up either with transaction STRANS or by choosing Edit Object u2192 More u2192 Transformation followed by Simple Transformation in the ABAP Workbench object navigator
More information on Simple Transformations is available in the Knowledge Warehouse.
Example (from help also )
Simple Transformation Example
Serialization of a nested structure. In the following ABAP program section, a nested structure struc1 is serialized to xml_string with the Simple Transformation st_trafo and deserialized with the same transformation.
DATA: BEGIN OF struc1,
col1 TYPE c LENGTH 10 VALUE 'ABCDEFGHIJ',
col2 TYPE i VALUE 111,
BEGIN OF struc2,
col1 TYPE d VALUE '20040126',
col2 TYPE t VALUE '084000',
END OF struc2,
END OF struc1.
DATA: xml_string TYPE string,
result LIKE struc1.
TRY.
CALL TRANSFORMATION st_trafo
SOURCE para = struc1
RESULT XML xml_string.
CALL TRANSFORMATION st_trafo
SOURCE XML xml_string
RESULT para = result.
CATCH cx_st_error.
ENDTRY.
The Simple Transformation st_trafo has the following form:
<tt:transform template="temp"
xmlns:tt="http://www.sap.com/transformation-templates"
version="0.1">
<tt:root name="PARA"/>
<tt:template name="temp">
<X>
<X1>
<tt:value ref="PARA.COL1" />
<X2>
<tt:value ref="PARA.COL2" />
<X3>
<X1>
<tt:value ref="PARA.STRUC2.COL1" />
<X2>
<tt:value ref="PARA.STRUC2.COL2" />
</X>
The transformation consists of a Template temp that defines the structure of the XML document and establishes relationships between value nodes and components of the structure. The result of the transformation is as follows (line breaks and indentations were inserted for clarification purposes):
<X>
<X1>ABCDEFGHIJ
<X2>111
<X3>
<X1>2004-01-26
<X2>08:40:00
</X>
The conversion of elementary data types is the same as for asXML. The reverse transformation generates the same content in the structure result as in struc1.
Good luck. -
Using ADDRESS PARAGRAPH to call International address ??
HI Experts,
I have an existing Sapscript to modify.
I need to extract/retrieve the address of the customer by using the International Version address maintained by the user.
However - in the existing Sapscript, it uses the ADDRESS PARAGRAPH to call formating address.
Is it possible to extract the international version address using the ADDRESS PARAGRAPH function in Sapscript?
Kindly advice.
Thank You.
Best Regards,
CW
Edited by: CW LIM on Oct 21, 2009 6:06 AMClose Postage
-
Regarding Call Transction 'FBL3N'
Dear Friends,
i am calling Transaction FBL3N from an ALV Report and I am able to do the same, but I am unable to call it for the specified date in selection-screen. And I want to display option All Items to be activated.
If i am entering date range from 01.04.2009 to 31.03.2010 then while calling transaction FBL3N , it will call All Items From the specified date for the specfic G/L Account.
Pls, Suggest any good solution.
Thanks & Regards,
Sandip Sonar.Hello
FBL3N - it is report RFITEMGL. So try this:
submit RFITEMGL
with SD_SAKNR-LOW = '12341234' " <- pass GL account here
with SD_BUKRS-LOW = 'AAAA' " <- pass company code here
with X_OPSEL = ' ' " <- disable radiobutton Open items
with X_CLSEL = ' ' " <- disable radiobutton Cleared items
with X_AISEL = 'X' " <- enable radiobutton All items
with SO_BUDAT BETWEEN '20090401' AND '20100331' " <- pass date range here
and return. -
Regarding passing internal table data to D.B Table&DELETE statement in ABAP
Hi All,
Can anybody tell me what is the exact syntax for following statement.
<b>Get all records from table zppe0169_01 into an internal table-I_PO and delete duplicates for unique EBELN and EBELP</b>
Can any body give syntax for the above.
Thanks in advance.
Thanks & Regards,
Rayeez.Hi All,
Thanks for those replies.
Actually <b>zppe0169_01[Datbase table]</b> and I_PO structures are diffrent.
They are as follows
<b>For I_PO
BEGIN OF i_po OCCURS 0,
ebeln LIKE ekpo-ebeln,
ebelp LIKE ekpo-ebelp,
matnr LIKE ekpo-matnr,
werks LIKE ekko-reswk,
eindt LIKE eket-eindt,
ps_psp_pnr LIKE ekkn-ps_psp_pnr,
ptype(3) TYPE c,
techs LIKE ekpo-techs,
mesg(50) TYPE c,
END OF i_po.</b>
For zppe0169_01 fields are as follows.
<b>EBELN
EBELP
MATNR
WERKS
EINDT
PS_PSP_PNR
PTYPE</b>
as I_PO is having 2 more fields than actual database table will the following SELECT statement fetch the data correctly.
<b> SELECT *
FROM zppe0169_01
INTO TABLE i_po.</b>
If <b>No</b> - can anybody tell me what change i have make to above SELECT to make it work perfectly.
Thanks & Regards,
Rayeez. -
URGENT: Regarding CALL FUNCTION 'GET_FIELDNAME_TEXT_1
hi,
i have made a report in which i am displaying changes to material and it is giving runtime error and it is saying :-
A RAISE statement in the program "SAPLMASS_GENERAL_UTILITIES" raised the
exception
condition "NOT_FOUND".
Since the exception was not intercepted by a superior
program, processing was terminated..
as i am using FUNCTION 'GET_FIELDNAME_TEXT_1.
plzz help me out by providing solution of it as help will be definately rewarded.hi venkat,
i had tried what u said but it is still giving runtime error.
here is code which i had developed and letme know is dere any problem ? It is displaying the changes made to material ina month.
*& Report ZNEW02
REPORT ZNEW02 no standard page heading LINE-SIZE 200.
TABLES: MARA,CDHDR,CDPOS.
DATA: BEGIN OF ITSTPO OCCURS 0,
MATNR LIKE STPO-STLNR,
WERKS LIKE MAST-WERKS,
MATNR LIKE MARA-MATNR,
MAKTX LIKE MAKT-MAKTX,
WERKS LIKE MARC-WERKS,
objectid like cdhdr-objectid,
changenr like cdhdr-changenr,
udate like cdhdr-udate,
TCODE LIKE CDHDR-TCODE,
USERNAME LIKE CDHDR-USERNAME,
NEW_VALUE LIKE CDPOS-VALUE_NEW,
OLD_VALUE LIKE CDPOS-VALUE_OLD,
FNAME LIKE CDPOS-FNAME,
DDTEXT LIKE DD04V-DDTEXT,
TABNAME LIKE CDPOS-TABNAME,
END OF ITSTPO.
DATA: E_DD04V LIKE DD04V OCCURS 0 WITH HEADER LINE.
DATA: E_DD03L LIKE DD03L OCCURS 0 WITH HEADER LINE.
data: begin of itcdhdr occurs 0,
objectid like cdhdr-objectid,
changenr like cdhdr-changenr,
udate like cdhdr-udate,
TCODE LIKE CDHDR-TCODE,
USERNAME LIKE CDHDR-USERNAME,
end of itcdhdr.
DATA: BEGIN OF ITCDPOS OCCURS 0,
OBJECTID LIKE CDPOS-OBJECTID,
CHANGENR LIKE CDPOS-CHANGENR,
NEW_VALUE LIKE CDPOS-VALUE_NEW,
OLD_VALUE LIKE CDPOS-VALUE_OLD,
FNAME LIKE CDPOS-FNAME,
TABNAME LIKE CDPOS-TABNAME,
END OF ITCDPOS.
****************end of all internal table declarations************************************************
parameters: werks like MARC-werks obligatory.
select-options: date for cdhdr-udate obligatory.
select objectid changenr udate TCODE USERNAME into table itcdhdr from cdhdr
where objectclas = 'MATERIAL'AND UDATE IN DATE and ( tcode = 'MM02').
or tcode = 'MM01' ).
if sy-subrc <> 0.
message 'No record exist' type 'E'.
endif.
DELETE ADJACENT DUPLICATES FROM ITCDHDR COMPARING CHANGENR.
SELECT OBJECTID CHANGENR VALUE_NEW VALUE_OLD FNAME TABNAME FROM CDPOS INTO TABLE ITCDPOS
FOR ALL ENTRIES IN ITCDHDR WHERE OBJECTID = ITCDHDR-OBJECTID AND CHANGENR = ITCDHDR-CHANGENR AND FNAME NOT IN ('AENDERER', 'AEDAT', 'AEUZEIT','AENDERDAT').
WRITE: / 'ITEMID DESCRIPTION CHG.PERSON CHG.DATE TCODE NEW VALUE OLD VALUE CHANGE MADE TO'.
ULINE.
DATA V_STLNR LIKE MARA-MATNR.
LOOP AT ITCDPOS.
CLEAR V_STLNR.
V_STLNR = ITCDPOS-OBJECTID+4(11).
READ TABLE ITCDHDR WITH KEY OBJECTID = ITCDPOS-OBJECTID CHANGENR = ITCDPOS-CHANGENR.
SELECT SINGLE AMATNR BMAKTX C~WERKS FROM MARA AS A
INNER JOIN MAST AS B ON BSTLNR = ASTLNR
INNER JOIN MAKT AS B ON BMATNR = AMATNR
INNER JOIN MARC AS C ON CMATNR = AMATNR
INTO ITSTPO
WHERE A~MATNR = V_STLNR.
ITSTPO-OBJECTID = ITCDPOS-OBJECTID.
ITSTPO-CHANGENR = ITCDPOS-CHANGENR.
ITSTPO-NEW_VALUE = ITCDPOS-NEW_VALUE.
ITSTPO-OLD_VALUE = ITCDPOS-OLD_VALUE.
ITSTPO-UDATE = ITCDHDR-UDATE.
ITSTPO-TCODE = ITCDHDR-TCODE.
ITSTPO-USERNAME = ITCDHDR-USERNAME.
ITSTPO-FNAME = ITCDPOS-FNAME.
ITSTPO-TABNAME = ITCDPOS-TABNAME.
IF ITCDPOS-FNAME <> 'KEY'.
clear e_dd04v.
CALL FUNCTION 'GET_FIELDNAME_TEXT_1'
EXPORTING
I_AS4LOCAL = 'A'
I_AS4VERS = '0000'
I_FIELDNAME = ITCDPOS-FNAME
I_TABNAME = ITCDPOS-TABNAME
TABLES
E_DD03L = E_DD03L
E_DD04V = E_DD04V
EXCEPTIONS
ERROR_IN_PARAMETERS = 1
NOT_FOUND = 2
OTHERS = 3
ENDIF.
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
CLEAR E_DD04V-DDTEXT.
ENDIF.
IF ITCDPOS-FNAME = 'KEY'.
ITSTPO-DDTEXT = 'New Entry Made'.
ELSE.
ITSTPO-DDTEXT = E_DD04V-DDTEXT.
ENDIF.
CLEAR E_DD04V.
APPEND ITSTPO.
SORT ITSTPO BY MATNR OBJECTID CHANGENR FNAME.
DELETE ADJACENT DUPLICATES FROM ITSTPO COMPARING MATNR OBJECTID CHANGENR FNAME.
*DELETE ITSTPO WHERE MATNR EQ SPACE.
WRITE : / ITSTPO-OBJECTID+11(11),16 ITSTPO-MAKTX,66 ITSTPO-USERNAME,83 ITSTPO-UDATE,97 ITSTPO-TCODE,110 ITSTPO-OLD_VALUE,164 ITSTPO-NEW_VALUE,184 ITSTPO-DDTEXT.
ENDLOOP. -
Regarding calling 1 report from another
Hello Friends,
Can u plz tell me how to call one report from another report.
Regards,
Drashanahi,
Use SUBMIT program statement
SUBMIT ZFIR001
chk this.
*Code used to populate 'select-options' & execute report
DATA: seltab type table of rsparams,
seltab_wa like line of seltab.
seltab_wa-selname = 'PNPPERNR'.
seltab_wa-sign = 'I'.
seltab_wa-option = 'EQ'.
load each personnel number accessed from the structure into
parameters to be used in the report
loop at pnppernr.
seltab_wa-low = pnppernr-low.
append seltab_wa to seltab.
endloop.
SUBMIT zreport with selection-table seltab
via selection-screen.
*Code used to populate 'parameters' & execute report
SUBMIT zreport with p_param1 = 'value'
with p_param2 = 'value'.
Other additions for SUBMIT
*Submit report and return to current program afterwards
SUBMIT zreport AND RETURN.
*Submit report via its own selection screen
SUBMIT zreport VIA SELECTION-SCREEN.
*Submit report using selection screen variant
SUBMIT zreport USING SELECTION-SET 'VARIANT1'.
*Submit report but export resultant list to memory, rather than
*it being displayed on screen
SUBMIT zreport EXPORTING LIST TO MEMORY.
Once report has finished and control has returned to calling
program, use function modules LIST_FROM_MEMORY, WRITE_LIST and
DISPLAY_LIST to retrieve and display report.
\[removed by moderator\]
rEGARDS
Edited by: Jan Stallkamp on Jul 29, 2008 5:25 PM -
Query regarding Call errors in webview
We are running on UCCE 8.x comprehensive setup. On an average in a week we get around 20 call errors in the webview report. Also, I had read a Cisco document stating different scenarios for call errors. I would like to know what will happen to a particular call if it is incomplete, etc and how to minimize the call error by providing high customer satisfaction
Regards,
DassHi Bhargav,
Do one thing just check in tcode - SE01
and enter your TR No. in first tab..
Now in the TR expand and double click on the task no.
Here you will get list of objects to be transported to with this TR..
Just whether you TR includes entry for your screen
<b> OR</b>
Incldue R3T3 PROG <UR_PROG_NAME>
If both the case is not application...then the screen has slipped from the TR and has to be transported in separate request..
Just check TR and let me known ...based on ur response we can move ahead..
Enjoy SAP.
Pankaj Singh -
Regarding Calling a Report Program
Hi Gurus,
1. I have an Requirement in which i need to call Program CATSSHOW.
I need to Pass the Selection screen values from calling program by skipping the Selection screen of Called Program.
or
2. Can i call the Transaction CADO(which is T-CODE for CATSSHOW Program)
by passing selection screen values from calling program to call program skipping selection screen.
I used a. SUBMIT catsshow
WITH so_pers IN r_pernr
WITH so_datum IN r_datum
AND RETURN.
which goes to the called program and does not pass the values to the ranges in called program.
a. SUBMIT catsshow VIA SELECTION-SCREEN
WITH so_pers IN r_pernr
WITH so_datum IN r_datum
AND RETURN.
which goes to the called program and pass the values to the ranges in called program and displays the selection screen. (which i needs to skip).
Please help regarding this.
Thanks and Regards
SanathSUBMIT catsshow
WITH so_pers IN r_pernr
WITH so_datum IN r_datum
AND RETURN.
this should work.. make sure r_pernr and r_datum are filled properly the option and sign fields...
MOVE wa_parameter-parva TO s_vkorg-low.
MOVE 'I' TO s_vkorg-sign.
MOVE 'EQ' TO s_vkorg-option. "<<<<< this varies
APPEND s_vkorg.
MOVE wa_parameter-parva TO s_vkorg-high.
MOVE 'I' TO s_vkorg-sign.
MOVE 'EQ' TO s_vkorg-option. "<<<<< this varies
APPEND s_vkorg.
look at the padded zeros or conversion exits available for the field... -
Query regarding calling T-code MIGO from ALV report output
Dear friends,
I have to call MIGO transaction from my ALV report output. Now problem is that I have to set the value 'display' In the first header field, 'Material Document' in 2nd header field when MIGO is called from the report output. Morever there is no parameter ID for these two fields. So how to set the values w/o using parameter ids.
Regards,
RishiHi,
Try this coding,
FORM DISPLAY.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
IS_LAYOUT = AK_LAYOUT
IT_FIELDCAT = AK_FIELDCAT
TABLES
T_OUTTAB = ITAB.
ENDFORM. " DISPLAY
*& Form EVENT
FORM EVENT USING P_AK_EVENT TYPE SLIS_T_EVENT.
DATA : AK_EVENT1 TYPE SLIS_ALV_EVENT.
AK_EVENT1-NAME = 'USER_COMMAND'.
AK_EVENT1-FORM = 'USER_COMMAND'.
APPEND AK_EVENT1 TO P_AK_EVENT.
ENDFORM. " EVENT
*& Form USER_COMMAND
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
IF R_UCOMM = '&IC1'.
" AND SY-LSIND = '1'.
READ TABLE ITAB INDEX RS_SELFIELD-TABINDEX.
SET PARAMETER ID 'AUN' FIELD ITAB-BUDAT.
CALL TRANSACTION 'MIGO' AND SKIP FIRST SCREEN.
ENDIF.
ENDFORM. " USER_COMMAND
Regards,
Nikhil. -
Regardding CAll Transaction where i will get return value
Dear Expert ,
My Requirment is i am Passing parameter to call transaction it is working fine , but
i want to get data which is displayed after calling that transation .
Such as
sel_data-program = 'gp3umn8b57fzlorwxdm2y9lqq7e'.
sel_data-dynpro = 1000.
sel_data-dynbegin = 'X'.
APPEND sel_data.
CLEAR sel_data.
sel_data-fnam = 'S_FICTR-LOW'.
sel_data-fval = fund_cntr .
APPEND sel_data.
CLEAR sel_data.
sel_data-fnam = 'FIPEX-LOW'.
sel_data-fval = 'OS001' .
APPEND sel_data.
CLEAR sel_data.
sel_data-fnam = 'PAR_01'.
sel_data-fval = 'BFL' .
APPEND sel_data.
CLEAR sel_data.
sel_data-fnam = 'PAR_02'.
sel_data-fval = '2010' .
APPEND sel_data.
CLEAR sel_data.
CALL TRANSACTION 'FMRP_3FMB4004' USING sel_data . " AND SKIP FIRST SCREEN.
After Executing this code it calls this code 'FMRP_3FMB4004' with output such as Available budget and etc ...
this out put i want to return through call transaction which i am calling through RFC .
I Dont want to use SUBmit Report .
Regards
Deepak Dhamat .i have included that program name as a include program name
and accessed that table to get data .
Problem Solved .
Maybe you are looking for
-
Transfer Album 2.0 (XP) to Elements 8 (Windows 7)?
I have been using Photoshop Album 2.0 in Windows XP for quite awhile. My new laptop runs Windows 7. I was able to copy my Photoshop Album 2.0 into the Virtual XP portion of my new laptop. I am considering upgrading to Elements 8 on the Windows 7 p
-
Installed iTunes 10.5.1, now my desktop icons are not showing up properly
The icons that are effected are the taskbar icons at the bottom of the desktop. I use thes to open my programs. When I open itunes the icons will then show properly, but when I close iTunes they again look translucent and are hard to see.This has to
-
How to process records one by one(not in parallel) with LSMW(BAPI)
We loaded a batch of records (around 800) in lsmw with biz object method(BAPI). The records were processed in parallel and this caused some locking issue. Is there any way to make sure the records in LSMW with biz object method(BAPI) are processed on
-
Sun ONE Web Server 6.1SP4 - Crashing
I am getting the below while starting the web server instance. I have checked with the OS support team and they confirmed that the system is upto date with all the OS patches. Can someone please help? Sun ONE Web Server 6.1SP4 B01/20/2005 17:43 catas
-
HT204053 what is the storage limit in GB for itunes match
what is the limit in GB for itunes match?