Regarding CCMS

in CCMS, if processing time more than threshold time we 'll get alert, so avoiding the alert we reduce the processing time, how we'll do this
reply sap gurus,
waiting for ur replies.....

Kiran
Please check this SAP Note 730193.
It talks about specifying threshold values for the triggering of alerts in XI . I thought you would like to do it the other way according to your coustomized XI environment and its usage .
Regards
Rahul
Please award points if help is useful *****

Similar Messages

Query regarding CCMS alert in XI

Hi XI gurus,
We have some queries regarding the CCMS alert configuration in XI server. We are planing to implement CCMS alerts for Message failure in IE, Adapter Engine, Queue Block, etc.
Can anyone please let us know what exactly should be done by BASIS team and XI(Dev/Support) team.
Thanks
Suganya.

I have not done this but was implemented in my projects
I am providing some links which you can use with help of BASIS
http://csc-studentweb.lr.edu/swp/Berg/Conferences/SAP_NW2008_and_Admin_2008/ADMIN/Track4/Track4_session2.pdf
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ccms-custom-configuration-771913
Configuring Alert management (ALM)
You should basically aim at configuring SOLMAN as your central alert cerver so that you will receive alerts from DEV QA PROD boxes of PI , ABAP in one system , no need to configure alerts separately
Regards
Ninad

XI:Concerns regarding CCMS alerts,IDOC,JDBC,FILE,PROXY

Dear Experts,
I have some doubts regarding below listed points.Please,help Me to find thesuitable answer for these.
*1.if multiple messages to be sent(IDOC) through same JDBC adapter,how we'll do it(THROUGH SAME jdbc Aadpter,in same config scenario)?*
*2.in receiver determination,if we have to send to multiple receivers according to payload content(conditional passing to receiver depends on payload),**how we'll acheive it?*
*3.what is file content conversion?*
*4.why proxy is known as adpterless scenario?*
*5.in case of idoc/proxy why sender side no communication channel but in receiver side we are using communication channel?*
**6.what is CCMS alert?
*7.in a file2file scenario,if we want to convert one file content to other file content in a different form(as x->1,y>2),*
*how we'll acheive it?*
*7.if lots of data checkings are there in case of SAP R/3,by whcih way we'll go?(idoc/proxy/rfc)
*8.how we'll decide whether to go for SOAP scenario?*
*9.what is adapter module?whan we'll go for different adapter modules other than standard?*
*how we can develop our own adapter modules?*
*10. how to map one field to other field,when they are present in different noad with respect to source and target strucrture?*
Eagerly waiting for youyr valuable opinion.
Regards,
Rasmiraj Tripathy

Do a search in SDN first for these questions.
You will find the answers to the most.
Else post specific questions

Queries regarding CCMS monitoring setup

Hi All,
We have configured the CCMS alert monitoring setup for our system and thatu2019s running fine.
We have some queries:
Is it possible to get the availability of the physical server (windows) using CCMS ping?
We have configured it on high availability server and registered the SAPCCM4x and CCMSPING agent to both nodes but facing issue with file system usage monitoring, we are not getting the data for virtual drive, Example: we are getting the data for only 3 drives C, D, S but we are not getting data for other drive like G, Z, F..
We have checked also the ST06 for the file system there also we are getting the same data.
Please suggest
Regards,
Harish

Dear Mansoor
Since your questions are more related to configuration, I would suggest to go through the attached document especially the topics "Email Infrastructure" "Workflow" (defining routing logic for emails) and "Chat infrastructure. Here you will find information alongwith screenshots.

Regarding CCMS Alerts

Hi Everyone,
Could anyone provide related Information on CCMS Alerts. How these Alerts are configured. How are these different from Ordinary Alerts. When do we use these Alerts.
Regards,
Varun.K

Hi Varun,
Plz find the following links
https://www.sdn.sap.com/irj/scn/wiki?path=/display/profile/computingCenterManagement+System
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/dieter.krieger/blog/2006/03/29/new-feature-in-alert-management-rule-based-determination-of-recipients
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii

Regarding CCMS Alert Configuration in XI/PI

Hi Experts,
1) I have created distribution list DIS_LIST in default client 000, in between I have assigned SAP Userids with e-mail ids in SU01 of normal client 001.
2) In normal client 001: Goto RZ21-> methods -> Display Overview -> The method i used CCMS_OnAlert_Email
              Control tab: In control tab I have checked -> Execute Method: selected radio button: Periodically in dialog process (short running program), under Startup method I did not select any check box r radio button. But i have scheduled the job (RSCONN01) for every 10mins to send the mails out, is this setting are correct?
             Parameters tab ->
SENDER = USER17 ( Basis team sap user id, I have doubt how should I check she has authorization to send mails from xi to SMTP server, what role she should have, she does not know how to check this)
RECIPIENT = DIS_LIST (Distribution List name created in 000)
RECIPIENT-TYPEID = C
              In release tab: I have selected check box: Auto Reaction Method.
3) I have done in Rz21: In transaction RZ21, assign the method to the appropriate MTE class. To do this, choose Methods assigned to MTE classes from the Methods frame. Select the MTE class (MTE Class = CCMS_tRFC_qRFC_Context), double-click, and choose Edit è Assignment in other è to variant. In the variant box, choose * (or whatever properties variant you are using).
4)I am getting messages in Alert Inbox whatever may be the error, as I selected No Restrictions radio button. If I want to send all kind of errors using auto reaction method do you have any idea (as i have done previouse step for Failed Queues)
5)i have given 3 mail ids(user01@mailcom, user02@mailcom, user03@mailcom) in shared distribution list in client 000, fixed recipient in ALRTCATDEF i have given 2 user ids( USERID15, USERID16). whenever error happens the mail is sent to two mail ids of fixed recipient list (USERID15, USERID16) so i is not picking the recipients from Shared Distribution list.
In SOST transaction I could see SENDER as as runtime workbench, and recipient as USERID15 and USERID16. mail is sent to mail id of USERID15 and error occured for USERID16(i.e msg is not sent to mail id of USERID16).
in out look inbox i could see FROM: PIRWBUSER@mailcom and TO: user15@mailcom, user16@mailcom. but user16@mailcom is not receiving any msges , bcz it got error in SOST(we can observe that these 2 mail ids are from Recipient list not from distribution list)
In SOST transaction I could see SENDER as : Runtime Workbench Service instead of USER17 (i.e motioned as SENDER in rz21->properties tab), and it is taking RECIPIENTs from fixed recipients list(i.e ALRTCATDEF in 001) instead of SHARED DISTRIBUTION List (user01@mailcom, user02@mailcom, user03@mailcom) in client 000.
why this is picking form Fixed recipient list instead Distribution list?
in SOST its showing SENDER as Runtime Workbench Service instead of USER17( (i.e motioned as SENDER in rz21->properties tab)
SCOT configuration are working fine, i could send the test msges from xi to outlook inbox. please give me any advice on this. Almost i browse throug all related blogs and forums.
Thanks
Dhanush.

Dear
In the central autoreaction I created a newly defined central autoreactions
In the execution tab insert function module SALO_EMAIL_IN_CASE_OF_ALERT_V2
In the parameters tab insert following parameters (please note some are empty, this is intentionally but they have to be there). Fill in the correct values inside <value>.
Parameter name: SENDER                          Paramaeter value: <SAP user id>
Parameter name: RECIPIENT                       Parameter value: <email address>
Parameter name: RECIPIENT-TYPEID           Parameter value: U
Parameter name: REACT_ON_ALERTS         Parameter value:
Parameter name: SUBJECT_ALERT              Parameter value: <mail subject text>
Parameter name: SUBJECT_ALERT_CONT   Parameter value:
There is no additional setup required in this example, not SCOT, not even setting a mail adress for the SAP user id used.
You could recreate this or get more info on this function module, assign points if helpfull.
Kind regards
Tom

Display sender and receiver interfaces in CCMS

Hello CCMS Specialists,
I've a question regarding CCMS and SNMP TRAPS.
In my case I'm sending the alerts to a Third Party application via SNMP TRAPS. In CCMS I don't get the information about a specific Interface and therefore I can't send it to a third party application.
My question is: is it possibile or how to send the information from an interface (sender and receiver information) via CCMS to our Third Party application?
For example, if there has been an Internal HTTP error. We don't get the details about the interface. Hoe could we display those information as well?
Kind Regards,
Kamran

hi,
And also check spro -
> financial accounting -
> financial accounting global settings -
> correspondence -
> define correspondance check the variant bcause all are standard variants so the one which we require need 2 make changes......... create our variant..
if useful assign points....
regards,
santosh kumar

CCMS AUTO REACTION METHOD

hi all,
i hope u all r fine and in the best of ur health.
i have a problem regarding CCMS Auto reaction method , i want to use my own copy of this method
SALO_EMAIL_IN_CASE_OF_ALERT_V2 , but i am recieving a fatal error when ever i try to execute
auto reaction method manualy in RZ21.The reason that i am using this custom copy of this funtion module is that i want to display my own data when ever i recieve the email.
if any body could help me in this regard, thanks in advance.
regards,
Umer Malik
Edited by: Umer Masood Malik on May 19, 2009 1:10 PM

hi Sean / Bhudev,
i have done that but was not working . but later on i find the answer and the solution.
actualy i am working in 100 client and data supplier program was running though in 100 cleint but
the select statement used in was reffering the 100 client tables so thats why when i used the select
cleint specified statement in my report and then tried again , the data collection method was running properly but was not having the data because earlier it was reflection towards the 100 cleint, but now
its pointing to the 000 cleint so its running....
any way thankssss alott for such help...
regards,
umer

CCMS custom alert setup training

Does anyone know of any training other than the ADM106 and ADM107 from SAP? I would like to find training that is more into the customizing of alerts and not just the general stuff. Thanks in advance.

> Hi Johanna,
>
> There is one guy on the network , who has put some
> nice blogs regarding CCMS agents based solution
> monitoring.
>
> Check this page:
>
> https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/u/26 [original link is broken] [original link is broken]
> 943
>
> Regards,
> Siddhesh
Thanks Siddhesh,
I will check him out.
Johanna

CCMS and PMI monitoring

Hi,
   I do have some doubts regarding CCMS and PMI monitoring..
   As of now we are plannig to configure CCMS.But i want to know about PMI.. when it comes to the picture in monitoring.
   How PMI is different from CCMS ? and which one is the better option to monitor
   Please clarify me...
Regards,
Sandeep

Hi,
Check the thread for details Re: Role of CCMS & PMI in Runtime Workbench?
Thanks!

CCMS Settings

I want to configure CCMS settings in my XI systems.Objective is to send mails when alerts are triggered both in WAS as well as JAS.I have configured everything regarding CCMS and also set the auto reactions methods.However no mails are coming to my SCOT.
SCOT is configured properly and all mails go out of it when I try from SBWP.Job for sending the mails from SCOT is also scheduled.
All the settings relates to CCMS and SCOT have been done in client other than 000.
If anyone can suggest some pointers or documents.Please send across to me at [email protected]
Thanks

Hi,
When CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy

Reg: CCMS alerts

HI all ,,Need some material regarding ccms alerts ?Thankx in advance .......

Hi community,
I reply in this (closed) post because I have a general question about CCMS
On Windows installations I can see from SAP MMC at operating system level the alerts from rz20 graphically and all in a single global view.
Is there something similar for Unix/Linux installation too? Can I have the same view on Unix installation?
From rz20 transaction I can't see the alerts unless i select manually every monitor set, but I wonder if there is a way to have a global view of alerts as I can have with SAP MMC
I hope to have expressed myself clearly
Regards, Valerio

Upgrading CCM from V4.2 to V5.1

Dear all,
I need an information due to upgrading CCM from v4.2 to v5.1
I have MCS7825-I2.
It is applicable for windows OS, or just Linux OS is supported.
also i am not sure if IBM server can run Linux.
Regards,

CCM 5.1 supports Arabic localization. From 5.1 release notes
"Arabic Language (right to left) Support
Cisco Unified CallManager Release 5.1 supports Arabic locales on Cisco Unified CallManager user interfaces and Arabic text on phone screen displays for supported phones.
Cisco Unified IP Phones Supported
?7906G and 7911G
?7961G/GE and 7941G/GE
?7970G/7971G-GE"
http://www.cisco.com/univercd/cc/td/doc/product/voice/c_callmg/5_1/rel_note/511cmrn.htm#wp369281
6.0 should be out somtime in 2007.
HTH,
Chris

ABAP API's - URGENT- Tracking of changes in MDM.

Hello Experts,
I want to track all the changes made in MDM In ECC. I know that i can do it using ABAP API's tracking feature.
I have already established the connection between ECC and MDM.
I would want to know all the exact steps to enable tracking and monitoring through ABAP API's.
Helpful answers will be highly appreciated.
Thanks and Regards
Nitin jain
Edited by: Nitin Jain on Jan 29, 2008 4:45 AM

Hi Nitin,
As you have already connected to MDM through R/3.
For Changing Tracking, you have to call the function 'MDM_ADMIN_RETR_CHANGE_TRACKING' for that you have to use structure MDM_AUDIT_INFORMATION.
I am not quite sure will it work. Please try.
Hope it helps you,
Regarding CCMS montoring in MDM ABAP APIs, refer the link:
How TO Guides available on Service Market Place.
https://websmp210.sap-ag.de/~sapidb/011000358700004121872006E --> operations
Here apart from How to guides you will also get
HowTo_CCMS_Trace.pdf : It will guide you if there any errors come in connection b/w R/3 and MDM. it does the following:
. Collect and evaluate application log data
- Collect and evaluate kernel trace data
- Problem solution showcasecomes
if your HowTo_07.pdf on Tracing report is working fine then you can identify whether is there any error coming or not.
Lets take an example : if you Shut down the MDM Server.
Then in R/3 On running HowTO_07 program:you will get ERROR DURING CONNECT: 3 , ERROR DURING DISCONNECT: 3
The Reason for this is the unavailable server. but here you will not get more details. For this
After implementing HowTo_CCMS_Trace guide: under transaction RZ20 : In Application Trace you will see error Partner not reached (hostXXX, Service 20005) and
In Kernel WorkProcess Trace: You will get error: MDE Kernel Error, NiRaw2ConnectError: the attempt to establish a socket connect caused an error.
So in this way you evaluate the error in more details.
Note: For this you should have authroize to use the transaction RZ20 in R/3 System.
Hope it helps you,
Mandeep Saini.

How to test XI project..

1.How to test xi projects?
2.then how to test our scenario? Is there any testing tool is available to test the scenario?
3. What is CCMS? how it is useful in XI ?
Thanks in advance
Rakesh

Hi Rakesh,
+1.How to test xi projects?
2.then how to test our scenario? Is there any testing tool is available to test the scenario?+
XI is about messaging. So the way to test an XI implementation would be to test the messaging. Two options for doing that...
1. Test the implementation without the Application systems. The plain J2SE adapter really comes in handy here. You can use it to send an XML file to the Integration Server, check whether it is getting through the pipeline as intended (which means the routing, the mappings, etc), and let it pop out to a file somewhere. You can check all the steps the message has gone through from the XML monitor (sxmb_moni).
2. Test the actual implementation with the application systems. For this you would use the testing tools of the application itself.
I do not know of any automated tools for testing XI configuration, or any way of testing it without actually sending a message across.
What is CCMS? how it is useful in XI ?</b>
I can give you some info regarding CCMS, but the rest will try finding out and let you know soon. Mean while pls go through this info on CCMS.
When CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy
Message was edited by: Abhy Thomas

Regarding CCMS

Similar Messages

Maybe you are looking for