Regarding Certificate Profile

My client want to have a tool which will have complete  overview of all certificate profile in the system.Is it possible to have an extraction out of SAP?Is there any such tool existing presently.If I have to create a new one any suggestion on how to map this such that I can have the overview of all certificate profile in the system.
Please suggest.

Hi,
It does sound like your client is looking for not only certificate profile details, but indeed the records associated with it from wherever in the system.  The best way to do this wold be via a bespoke report “pulling in” all the required details they wish to look at. 
Obviously the more details required, more fields you’ll need, sometimes depending on how much/level you want to see may require 2 reports.  However this will come out in your mapping and why the mapping is a crucial step.  I imagine most of the fields you require should be fairly standard and easy to identify as discussed, mostly in the QM area.  i.e.
QCVK Certificate profile header 
QCVM Certificate profile characteristic level
QPMK Mic data including control indicators etc.
QMSP    Material Spec.
etc
The other advantage of the bespoke report is you can apply specific “rules and formulas” to the output to help with analysis. (although that’s the programmers realm ).
Regards

Similar Messages

  • Change of unit in Certificate profile

    Dear Friends,
    I want to chane the unit of measurement in certificate profile from mg/kg to PPM, but system is showing error as
    "Unit mg/kg cannont be converted to unit PPM"
    Please giude, how to over come this error as I want to change the UOM in COA.
    Regards,
    Amit Shirsath.

    Hi Amit,
    It doesn't seem to be possible.
    May be you need to create another MIC and do the re-assignments.
    Regards,
    Arpit

  • Problem in certificate profile assignment during QC15

    Dear SAP Gurus,
    1.In Development server while assignment of certificate profile  we can see the combination of Material/Plant.
    2. In production server  while assignment of certificate profile  we cannot see the combination of Material/Plant.
    Can anybody please suggest the solution.
    Regards
    Debjeet

    we have only  three options
    1)material/customer
    2)material
    3)Material Group  where is Material/Plant option i conn't get

  • Idoc/BAPI for Certificate Profile creation

    Hi,
    Is there any Idoc/Bapi available for Certificate Profile creation (Transaction Code  QC01).
    Appreciate your Inputs.
    Thanks.
    Regards,
    Pc

    BAPI_USER_PROFILES_ASSIGN  Change User-Profile Assignments
    SUSR_BAPI_USER_PROFILES_ASSIGN  Methods of object USER
    Edited by: Mahalakshmi Padmanaban on Feb 15, 2008 1:51 AM

  • No certificate profile found

    Hi Everyone,
    I am trying to generate certificates when we do a post goods issue for an outbound delivery.
    When I go to vl03n and go to extras, delivery output, header; I see two entries one for LQCA and one for LQCB.  both have a red status and the processing log states that "No certificate profile was found".
    I used QC03 and did a search using assignment on the certificate profile field and entered the material number that is on the outbound delivery.
    the system pops up a window that shows that material assigned to a Cert. profile on 4/2/2008.  The outbound delivery is for 4/16/2008.
    Any idea what I should be looking for?
    Thanks,
    Mike

    Hi Mike,
    Please check the Validity Period of CErtificate Profile and assignment.
    You may create a new asssignment is QC15 for the combinations of Plant/Material etc.
    Thanks and regards
    Murugesan

  • Changing Inspection characteristics of Certificate Profile

    Dear All,
    I copied one certificate profile from another certificate profile . Then i want to change the copied certificate profile . System not allowing adding at first characteristic it allowing to add at last . How can i add that specification as first .
    Regards
    Nandan.N

    When you add the new characteristic at the end, simply change the number on the far left to a value like 12 or 8.  When you save and come back in, it should be up where you want it.  you can delete the characteristic 10 but I don't beleive you can reuse the number until you archive data off the system as I believe it is marked for deletion and then not displayed but it still resides in the Datebase.
    You should be able however to update the characteristic in positon 10 to a new mic if you want though.
    Craig

  • Deploy Symantec certificate profiles to mobile devices using Microsoft Intune to manage company resources like WiFi

    We are planning to deploy Symantec certificate profiles to Mobile devices to manage company resource like WiFi. I've seen documentation on Technet and the post here http://ronnydejong.com/2014/12/15/part-1-deploy-certificates-to-mobile-devices-using-microsoft-intune-ndes-overview/ that
    we need to install Intune NDES connector which needs to be installed on NDES server. These docs are true when we are using Microsoft PKI.
    Here, we're planning to use Symantec cloud PKI to deploy the certificates to mobile devices. So, I would like to know which are the required on-premises components ? NPS, NDES  or something else? Any documentation URL would be helpful ;) We're in planning
    face hence the question in the forum. 
    Regards
    Anoop
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

    Thank you Jason for the reply !
    Sorry for stupid questions !
    Does that mean, NDES is needed only for initial enrollment process of a mobile device? We don't need it deploying Symantec certificate profiles to manage company resources like WiFi VPN etc... Or I'm totally lost here? 
    My understanding is : Mobile devices will get enrolled to Intune and that device will become a managed device. Now, the mobile device needs to get a connectivity to company resources like VPN or WiFi and for the we may need to deploy certificate profiles.
    Isn't it ? So, you were saying for this process we don't need to have NDES. (or I'm wrong here as well).
    If so, we'll be deploying a public certificate to all the devices via certificate profile deployment and the devices need to get connected with issuing authority to get a device specific private key before connecting to WiFi or VPN?
    Regards
    Anoop 
    Anoop C Nair (My Blog www.AnoopCNair.com)
    - Twitter @anoopmannur -
    FaceBook Forum For SCCM

  • Link between Material code, Customer & Certificate Profile (Quality)

    Hi All
    I develop one smart form for quality certificate.
    But I am not able to find out the link between Material, Customer & Certificate profile.
    In which table these all data are storing.
    On the basis of above condition MIC will print on Quality certificate.
    Regards
    ARK

    It should be posted in QM forum, isn't it?  Anyway, try this.
    First you get the profile schema in table T683 (configuration of profile schema in Quality Management -> Quality certificates -> Certification Profile -> Profile determination -> Define schema for profile determination).  Standard one is QC0001.
    Then you use function call V61I_CERT_PROFILE_FINDING with parameter (standard routine for finding certificate profile.  Unless you have the user exit, this routine should work):
    I_APPLICATION = QC
    I_DATE = current date or whatever date (i.e., delivery date in outbound delivery)
    I_DIALOG = leave blank
    I_HEADER_COMMUNICATION => here you can put in your customer, material, plant ; depend on your access sequence
    I_SCHEME = value from table T683
    You will get the output in table E_KONDI which give you data of condition rec. no, certification type, profile and version.
    Then you can use certification type, profile and version to select the characteristics from QCVM.
    Hope it helps.

  • MIC Selection in certificate profile on the base varsion.

    Dear Experts,
    i am not able to get my required MIC with valid task list selection on the date base, I have a MIC with versions 1,2,and 3 i need to select the MIC with version 1, i have created a certificate profile and for selecting the MIC i have chosen from Extras- Characteristic from valid task list and gave the valid group and the old date in which the MIC with version 1 is valid after selecting the MIC if i go and check in the display MIC i am observing the new MIC with version 3 only, But if i directly enter the MIC and its version number it is selected where as i am not getting it when i select it from task list, please let me know if the behavior is as per the standard SAP or not and is there any possibility to select the old version MIC from the Task list directly.
    Regards,
    Naveen.

    Hi Sujith,
    For example:
    My MIC Details:
    MIC       Version     Created       and  Changed
    A        -       1        -   17.10.2008   
    A        -       2        -   17.10.2008   and  22.06.2011
    A        -       3        -   17.10.2008   and  22.06.2011
    A        -       4        -    17.10.2008  and  12.10.2011
    Task List:
    Group           Change number          Valid from              MIC      Version
       1          -        NA                      -     23.10.2008      -       A      -      1    
       1          -      10000008994       -     20.10.2011      -       A      -      4
    Change number details:
    10000008994    Created on:22.06.2011 changed on:18.10.2011 and Valid from date:20.10.2011.
    Now i created Certificate Profile today and while selecting the MIN from Task list i gave the details as Group and valid from date as 19.10.2011 and found the MIC A with version 1 and selected the version and after saving when i go and check the MIC details i found it as MIC A with version 4 dint understand why it is version 4 even after i selected version 1 and saved it.
    Can you please comment on this why it is changing like this but one thing i observed is if i directly enter the MIC and give the version as 1 and save, it is remaining the same.l am getting this problem only when i select it through task list.
    Regards,
    Naveen.
    Edited by: vaddapalli naveen on Feb 22, 2012 5:43 PM
    Edited by: vaddapalli naveen on Feb 22, 2012 5:48 PM

  • Certificate profile

    How to prevent erase of certificate to sign and encrypt? I've not found in restriction the setting for save certificate.

    Hello Atul,
    COA Profile
    A certificate profile controls inspection lot selection, the sequence of characteristics, and the characteristic data.COA Profile contains the List of MICs in desired sequence in which the result for them is supposed to be printed in the COA.
    Within the certificate profile, you determine the selection and sequence of the characteristics whose results are to be documented on the certificate. You can vary the origin and representation of the data for each characteristic. You can also withhold certain information from the certificate, if, for example, you do not want to reveal a certain measured value.
    At the header level of the certificate profile, you can define restrictions for selecting inspection lots and partial lots. For example, you may want to specify that only lots with a quality score of at least 80 are considered. At certificate creation, the system selects all inspection lots and partial lots for the material (and batch, if necessary) that meet the selection criteria and have a usage decision. The characteristics are then retrieved from the most recent inspection lot or partial lot in this list. (The lot creation date is the determining factor.)
    If further clarity required, pls let me know.
    Now towards your second question,,,,
    In COA Profile, you want to know what are the materials assigned,,,,
    Here are the options available....
    1. In COA profile QC02/QC03 screen there is a tab available named as "ASSIGNMENTS", just click on it and it will give you the details.
    2 The best way is Run trx QC17. and know the list.
    Regards,
    Shyamal

  • Delete the assignments for the certificate profile

    Hi Experts,
    Can anybody please tell me how to delete the assignments of material for the certificate profile.
    Regard
    Raja S

    Hi Shyamal,
    I Run Trx QC18 , Entered Key Combination, same as what I have entered at the time of assignment through QC15. In the next screen,  I entered the material code to delete from the Profile.& Execute
    But in next screen there was no combination of material & profile in line item.
    What to do.

  • Material-certificate Profile.

    Where do you get the relaionship between material and its certificate profile ?
    Thanks in advance,
    Kishan

    hi kishan,
    go throught this link,
    [link|http://help.sap.com/saphelp_45b/helpdata/en/2d/3511dd448c11d189420000e829fbbd/frameset.htm]
    [ link1|http://help.sap.com/saphelp_45b/helpdata/en/2d/3511dd448c11d189420000e829fbbd/frameset.htm]
    Regards,
    sandeep
    Edited by: Sandeep patel on Jul 15, 2008 12:48 PM

  • Certificate Profile default values

    Is there a way to default values when adding a new Master Insp. Characteristic when creating a Cert Profile? For example, if I want to default:
    Category=1 Master inspection characteristic
    Plant=QM00
    Result Selection Level=1 Summary
    Add Text when not ok=1 If outside specification

    Hi Julie,
    There is no option in SAP for creating the default values in the certificate profile. We can either try using the exits like QMSD0001 or just copying the earlier created characteristics.
    Kindly ask me if you need any other details.
    Thanks & Regards,
    Srinivas.D

  • Certificate profile table

    Hi All,
    Pl.tell me the table for certificate profile and materials assigned to it ,as i have to develope a report in which i want to pring MIC's for those materials only which is assigned to certificate profile only.
    Thanks in advance

    Hi
    QCVK - Certificate profile header
    QCVMT - Certificate profile characteristics level : Text
    ZQCVM - Certificate profile characteristics level
    QCVV - List of preliminary products
    Thanks and regards
    Murugesan

  • Creating certificate profile

    Hi all,
    Please tell me what are the mandatory fields in the creation of profile ?
    what are the diff. config. settings?
    thnx

    Steps in IMG
    Certificate type can be crated for identification, hence you can crate type in img (Quality ManagementQuality CertificatesCertificate ProfileDefine Certificate Types)which you can assign a status profile if required.
    Define a form which you can use the std one
    Define Data Origin and Profile Determination u2013 this I think std can be used unless you want to defer  SAP std. This will help to choose a certificate profile incase if you have more than one for a particular combination
    Transaction
    In QC01 use the certificate type created and enter a name for profile.
    Give the name of form.
    Click on characteristics overview button and enter the details. and then the release the profile
    In QC15 assign the material to certificate.
    Try and come back

Maybe you are looking for