Regarding changing the position of filter in overlap add

Hello,
I have overlap add filter. I am asked to change the position of the filter with the output . Move filter either side, its like tuning the output using the filter. I have no idea on how to start this initially. Please help me in this.

Hello Sir,
I am sorry for uploading wrong file. I did not see this till today. I am uploading it. Please go through it.
I have a filter. 1's represent the portion of filter and 0's represent LOW of filter. Now, I want to move the filter as shown with arrows in diagram. I know the concept. Its by shifting 1's and 0's either side to move the filter. But, I am confused about how to do it.
Please help me with this.
Attachments:
DSC_0074.JPG ‏1842 KB

Similar Messages

How to change the position of a rectangle dynamically

Hi,
I am designing a form, where the position of a rectangle has to be changed dynamically. I'm trying with Set_Item_Property(Position property). But I'm unable to change the position. I need some information regarding this graphics object. Normally, we attach block name with the items. Then for these graphics object, what will be attached. I'm using Forms 6i version.
Regards,
Alok Dubey

you can use a stacked canvas with the rectangle in it. Then you can change the position of the canvas at runtime. Problem is, that the canvas overlaps objects...

How to Change the position of Column in ALV report

Hi Follks,
    Is is possible to change the position of column in ALV report?.If yes then how?
    Basically my requirement is, that user want afacility where , he should be able to change the position
    of column aftre he runs the report.
    Eg: After running the report , user felt that column 5 should be at position 2 , in that case he should
           be able to drag column 5 at position 2 and vice versa.
    Please help me, how to solve this issue.
    Note : I am using NW 7.0 SP 9
    Regards
    PG
Edited by: PG on Apr 13, 2009 11:10 AM

HI PG,
do below whie filling the filed catlog
wa_fieldcat-fieldname        = 'Field1".
wa_fieldcat-COL_POS = '1',
append wa_fieldcat to it_fieldcat.
wa_fieldcat-fieldname         = 'Field2".
wa_fieldcat-COL_POS = '2',
wa_fieldcat-fieldname         = 'Field3".
wa_fieldcat-COL_POS = '3',
Thanks!

How to change the position of label of an item to be in the rigth side?

Hi ,
I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left side of the text field of the item?
Thanks in advance
Yoel

Hello Yoel,
>> I want to change the position of the label of an item (displayed as text field) to be in the rigth side of the text field of the item instead on the left
Are you talking about a single item among others, which will be left at the left side, or are you talking about the entire page (Right-To-Left page orientation)?
I’m afraid Leo suggestion will not help you either way. The “Horizontal / Vertical Alignment” field, in the label section of the item, pertains to the alignment within the ‘TD’ cell of the item’s label, which by default is located to the left of the item. Within this cell, you can choose several alignment options, including right and left.
Regards,
Arie.

How can we change the position of an employe in 0001

Dear Friends,
I would like to change a record (either by copy/change) for infotype 0001 in order to change the position of any employee. Through PA30 when iam trying to do a copy
i found that the position field is only non-editable mode . Could any one let me know what is the procedure if you want to change the position of the employee.
regards
syamla

Hi syamla,
To cahnge position proceed in the following way:
Go to Pa30, select personnel number for whom u want to change position, select infotype 1 and click on "overview" icon.
In the "List actions" screen u will find one or many actions. Now select one action (where u want to change position) and click on "Copy" icon. Now u will reach "copy actions screen", and postion is field is editable. Change position. U might get this entry deletes a record, press enter. Save ur entries and continue to org. assignment infotype. save org. assignment infotype also.
Hope this will help u.
Reward points if helpful
Rajesh Panda

Why can't I change the position of the 'Top Collections' feature box?

In Public Site Manager I can select or de-select and change the position (ordering) of all the feature boxes on my provider page except for 'Top Collections'. As a result of this 'Top Collections' remains fixed at the bottom of the page. I'd like to move it to the top of the page so it's the first feature box that users see. What gives?
Options in Public Site Manager (notice there is no option to select or move 'Top Collections')
iTunes U Provider Page (notice that 'Top Collections' is at the bottom of the page)

Hi Julie
Thanks for the reply.
I can move the 'Top Downloads' box but not the 'Top Collections' box.
I don't use the What's New feature box so unfortunately I can't comment on that. In regards to the ordering in custom feature boxes I think it's no longer possible order the items. Or rather you can order the icons in Public Site Manager but in iTunes it orders them automatically by 'Most Popular', 'Name' or 'Release Date', with Most Popular being the default option. I do have my doubts, however, about the reliability of the 'Most Popular' ordering. I know for a fact that there are many collections / downloads on my iTunes U site which are way more popular than those that iTunes deems to be the most popular.
Regards
Tom

Update table HRP1001. Change the Position and the Org Unit.

Hi,
I am new to SAP HR and have been given a work in this area. The requirement is to update the relationship table HRP1001 replacing the old Manager' Position and the Org Unit with the New Manager's Position and the Org. Unit.
I have some how found out the way to get the Postion and the Org unit of the old manager. Now I am replacing the same with the new details using the Update HRP1001 Command but this is the old and not recommended method acheiving this task.
Can anyone please suggest me any Function Module OR the BAPI to update the HRP 1001 table with the New MAnager;s Position and the Org Unit.
Thanks...!!!
Regards,
Deepak.

Hi Kalpesh,
I am using the FM: 'BAPI_HRMASTER_SAVE_REPL_MULT'but still not updating. I am trying to change the Position and the Org unit but not successful yet.
I first used the Operator 'I' withi the table BAPIHROBJ-OPERATOR, it failed then I tried 'U' for update it still failed. Can you please let me know how many such operations possible with their charecter values apart from I & U. the domain value set does not exist as it is char1.
Now I came to know that I have to terminate the old relationship by changing the ENDDA and create a new one with the new BEGDA as tomorrow's date.
Can you please suggest something.
Regards,
Deepak.

Change the position of subform in adobe forms

Hi,
I have a requirement to change the position of subform(y co-ordinate) in offline adobe forms.
My subform is positioned and my code is:
this.y = "10 in".
Though this question has been answered a few times,I could not find the answer in any of them.
Please suggest...
Thanks and regards,
Raka.

Presenter doesn't have the same functionality for the TOC as Captivate. There is some wizardry that can be done if you want to adjust the look of the slide list.
Work around was discussed in this thread: http://forums.adobe.com/message/1970468#1970468

How to Change the position of Roles

Dear Experts,
I have a requirement in which I have to change the position of the roles.
How to achieve it, Please Suggest.
Warm Regards,
Upendra Agrawal

HI Upendra,
Follow the below process to re-arrange the roles as per your requirement:
1. From the Portal Catalog, right-click a role or workset and choose Open ® Object. The role or workset is loaded into the appropriate editor.
       2.      In the displayed editor, select either:
   The root node of the role or workset hierarchy
A workset or folder within the role or workset hierarchy
A folder within a workset of the role or workset hierarchy
       3.      In the Role/Workset Editor, click Properties to display in the Property Editor the properties of the object that you selected.
       4.      From the Property Category dropdown list, choose Navigation.
       5.      In the property list, scroll to the Sort Priority property and enter a numeric value.
       6.      Click Save.
In the same way, assign values to all of the navigation nodes that you want at specific locations in the portal navigation hierarchy.
Hope it helps.
Regards,
Gourav.

How to change the position of a menu?

Hello,
I'm a new dreamweaver developer so I would like to ask you
few questions.
If I have a sprite menu that is positioned by default in the
left border of the page, how can I change it's position inside the
page?With css?How?
I'd have to put inside my page also a logo image but, just as
menu, I am unable to put it in the right part of the page; so I was
wondering how to change its position too.
Thank you,
Kind Regards, Luke14free

You would change its position by changing the position of its
container. We
would need to see your page and its code to know how to do
that.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"luke14free" <[email protected]> wrote in
message
news:f2pntm$lf1$[email protected]..
> Hello,
> I'm a new dreamweaver developer so I would like to ask
you few questions.
> If I have a spry menu that is positioned by default in
the left border of
> the
> page, how can I change it's position inside the
page?With css?How?
> I'd have to put inside my page also a logo image but,
just as menu, I am
> unable to put it in the right part of the page; so I was
wondering how to
> change its position too.
> Thank you,
> Kind Regards, Luke14free
>

Dreamweaver CC fluid grid, can I change the position of DIV's based on Mobile, Tablet, Desktop view?

Hi all,
Currently working on my first Dreamweaver CC fluid grid / responsive site. I want to optimise the pages layout for Mobile, Tablet and Desktop.
I can see that I can hide individual div elements by adding "display: none;" to the mobile media query code in the CSS.
I am wondering am I able to change the position of DIV's in relation to the order of each other some how using a similar way?
Eg I have a webpage design for desktop like.
Title
Nav
Description
Buy Button
Photo
On mobile I'd like to be able to bring that Photo up towards the top of the layout eg.
Title
Nav
Photo
Description
Buy Button
I was hoping those up and down arrows you see in the Dreamweaver CC interface was going to some how make the changes to each view Mobile, Tablet, Desktop, but all that is doing is moving the position of code in the HTML amoung each of the main DIV sections.
Or am I at the point where I will need to create a seperate page for mobile only to make a layout change like this?
Any help would be great

Hi Complexity,
I have got some further info, and if I have lead you astray I am sorry.
I don't think you can change the order of the divs in a responsive layout in DW CC.
However, you can arrange the divs to sit under or beside each other differently in each of the layouts, for pc, tablet or phone.
You can also switch divs off and on in each of the layouts, having them display in one size screen and not in another.
So what you would need to do is to create a couple of nav divs, if you want a nav at the top of one type of screen and one at the bottom. You could duplicate the content in both of them and switch one on in one layout and one off in the other.
I hope this helps!
I am doing my first layout for a client using DW CC responsive layouts. I have done two test/hobby sites already.
It is a bit of a mission learning it but I am getting there.
I do find it interesting that most people recommend using other programs to do responsive rather than Dreamweaver's fluid grid layouts. I don't think many people are using it yet.
Regards,
Mary

Change the position of fields

Hi Experts,
May any body tell me how can we change the position of the field in the application .e.g.In activity calendar we have priority and objective fields and we want that objective come first then priority.
Can any body please tell me the process.
Regards,
Khurram Siddique

Hi siddique,
            Let's consider
Position      Filed Name              Field Type
10       FUNCTION     INPF Inputfield
20       DEPARTMENT     INPF Inputfield
now if you want to re-align these function and department fields, then first delete those two entires in the field group, then make entires of these two fields by changing the positions
Position    Filed Name              Field Type
10     DEPARTMENT     INPF Inputfield
20     FUNCTION     INPF Inputfield
and generate the layout..
Thanks,
Anil

OVS - how to change the position of the fields in the OVS search criteria

Hi,
I have an OVS search screen where 4 search criterias are there.Based on the search criteria , the values will be papulated in the OVS screen.
Now I have to change the position of the fields in the search criteria.Means if the Maximum field (one of the search criteria) is in the first position,I need to put it in the last position.I have ro change the position of the search criteria field and not the result fields.
Please suggest me how to do that.
Regards
-Sandip

Hi Sandeep,
please go through this article for customizing Value Help:
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c6132f-4ea3-2b10-4d8f-e68d2e96113d]
Thanks and Regards

Changing the Position of iview in Detailed Navigation

Hi,
I want to change the position of the iview in detailled navigation, Ex i have 4 iviews in detailed navigation as
1
2
3
4
now i want to bring 4 up, in the sense between 2 & 3.
One option is by setting the Sort Priority and i'am trying with other option on role level. I'am editing the role which has this 4 iviews assigned, right click on iview 4 and using option Move-->Up. Does this method work, please let me know.
Regards,
Pradeep

Hi Pradeep,
You can try below options -
1) Go to content Administration. Locate your Default Framework Page assigned to your Desktop .Double click it, a new window opens on right side. Out of various iviews, Check Desktop Innerpage and select Open tab. It will display 6 iviews. From the Page Content List of the Desktop Innerpage, select the Detailed Navigation iView (com.sap.portal.detailedNavigationTree) and click Properties. In the displayed Property Editor, check, set, and change the properties of the Detailed Navigation iView, as necessary.
2) You'll get a bak file for detailed navigation area.The par file is com.sap.portal.navigation.detailedtree.par.bak. You can get this par file from server System Admin>>Support>>Portal Runtime>>Browse deployment>>WEB-INF>>Deployment>>pcd. Import this par file into ur NWDS and edit it accordingly.
Regards,
Sen

Is it possible to change the position of beining of text in a standard report

Hi,
I am wondering wether it is possible to change the position of the test (the starting point) in a standard report. I would like to print a label with different texts at different positions. If its not possible in a standard report is there any other way to do it.
Thank you,
Mudda.

Hi Mudda, I don't see any way myself to set any particular starting position for your text. It looks like the best way to emulate this behavior would be to add a new line with lots of tab characters or spaces to place your new text at a specific offset from the left. You can also use Append Table to Report and wire in a 2D string array with only a few positions filled in with your various text labels as shown below. This will space text labels pretty well across the page. Try it out and see if it works for you. You could be more clever and build the 2D array programmatically if you wanted more control over position.
Message Edited by Jarrod S. on 06-02-2006 05:37 PM
Jarrod S.
National Instruments
Attachments:
Set_Report_Position.JPG ‏69 KB

Regarding changing the position of filter in overlap add

Similar Messages

Maybe you are looking for