Regarding cl_gui_alv_grid
Hi Experts,
Iam displaying ALV list using method set_table_for_first_display of class cl_gui_alv_grid.
Iam using container to display ALV list.Now my problem is that in contanier Iam getting whole toolbar,
to access this toolbar i have to use mouse key,Now user's requirement is that they want function key also.
For example:
If user clicks on 'Find' button by using mouse.He can able to do it.
But ctrl+F key is not available.
How to do this ???
Thanks & Regards,
Anagha Deshmukh
Hi Sandeep,
Thanks for your reply.But what I can i assign..Can you give me in brief.
When we used normal FM to display ALV list, it allows function key.. But same is not available with method set_table_for_first_display. So how to do that ???
Similar Messages
-
Hi all,
I've created an ALV report which is having a editable checkbox box field and some more fields that are not editable.
My requirement is that when i check any checkbox, some of the fields in that particular row should become editable.
In table control it can be done easily but can it be done in ALV.
Note: I have created the ALV through container as it was required.
Thanks in Advance.
Regards
DheerajHi,
Basically you will have to first register the data change event after you display the grid as follows:-
CALL METHOD y_lobj_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>MC_EVT_MODIFIED
EXCEPTIONS
error = 1
OTHERS = 2.
Here Y_LOBJ_GRID is my grid object of type CL_GUI_ALV_GRID.
Then you will have to set a handler method for this.
SET HANDLER y_obj_evt_handler->y_m_handle_cell_modified
FOR Y_LOBJ_GRID.
Here y_obj_evt_handler is a local class in your program and y_m_handle_cell_modified is the method of that class.
In this method you can change the fields to make then editable or non editable.
Regards,
Ankur Parab -
Check_changed_data method on editable ALV Grid ( class cl_gui_alv_grid)
Hi guys,
I use the following method (register_edit_event) in the PBO soon after first display of an editable ALV grid to register enter as an event to do validations on fields like qty. If user enters some character like 'abc' for qty and hits enter on keyboard, ALV grid pop's up a standard message ( I haven't coded for this.Since I use DDIC structure in field catalog, the Std. ALV program takes care of it. ). THis takes care of the validation before I click on save.
call method alv_grid->register_edit_event
exporting
i_event_id = cl_gui_alv_grid=>mc_evt_enter.
This works fine. But I want this validation to run when I also click the SAVE button of the screen. Is it possible to run this standard validation in my PAI event eg. SAVE ? I thought I will be, by calling the method check_changed_data in my PAI event. But this is doing nothing. Does this method conflict with register_edit_event or something ? So , basically what I am looking for is to trigger the event or call the method which does the same work as the "check" button on ALV grid.
Any advice or tips or sample code is greatly appreciated.
Thanks,
ShareenHi Shareen,
Handle the data_changed event in the grid.
Whenever you make changes in the data in ALV Grid this event would be triggered. Here you can perform additional validations that you may need to perform.
METHODS handle_data_changed
FOR EVENT data_changed OF cl_gui_alv_grid
IMPORTING er_data_changed.
Implementation:
METHOD handle_data_changed.
PERFORM validations USING er_data_changed.
ENDMETHOD.
FORM validations USING er_data_changed TYPE REF TO cl_alv_changed_data_protocol.
DATA: ls_good TYPE lvc_s_modi.
DATA wa LIKE LINE OF lt_good_cells.
CALL METHOD g_grid->register_edit_event
EXPORTING
i_event_id = cl_gui_alv_grid=>mc_evt_modified.
LOOP AT er_data_changed->mt_good_cells INTO ls_good.
CASE ls_good-fieldname.
WHEN 'FIELDNAME'. "Your fieldname
CALL METHOD er_data_changed->get_cell_value "Get the changed value
EXPORTING
i_row_id = ls_good-row_id
i_fieldname = ls_good-fieldname
IMPORTING
e_value = temp. "Your temp variable
"Make your validations here.
ENDCASE.
Ps: Reward points if helpful.
Regards,
Wenceslaus. -
How to insert line with values in ALV (CL_GUI_ALV_GRID)?
Hi,
Does anyone know how to get control of new line inserted in ALV (I am using class CL_GUI_ALV_GRID) before the new line is shown to the user. What I want the user to see is not a completely blank line, but a new line with certain fields filled with data.
I have tried with ALL events in CL_GUI_ALV_GRID but without any luck. If I create my own user command and insert it in the alv menu I get control, but not with the standards. Why?
Please help
Kind regards - Keld GregersenHi,
I created a nice work around...
CLASS lcl_event_handler DEFINITION.
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar.
DATA:
l_toolbar TYPE stb_button.
Here I replace SAP standard functions with own functions
READ TABLE e_object->mt_toolbar INTO l_toolbar
WITH KEY function = '&LOCAL&APPEND'.
IF sy-subrc = 0.
l_toolbar-function = 'OWN_APPEND'.
MODIFY e_object->mt_toolbar FROM l_toolbar INDEX sy-tabix.
ENDIF.
READ TABLE e_object->mt_toolbar INTO l_toolbar
WITH KEY function = '&LOCAL©_ROW'.
IF sy-subrc = 0.
l_toolbar-function = 'OWN_COPY_ROW'.
MODIFY e_object->mt_toolbar FROM l_toolbar INDEX sy-tabix.
ENDIF.
ENDMETHOD. "handle_toolbar
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'OWN_APPEND'.
CALL METHOD ref_alv->check_changed_data
IMPORTING
e_valid =
CHANGING
c_refresh = 'X'
CREATE YOUR OWN CODE HERE
CALL METHOD ref_alv->refresh_table_display
EXPORTING
is_stable = 'X'
i_soft_refresh =
EXCEPTIONS
finished = 1
others = 2
ENDMETHOD. "handle_user_command
ENDCLASS. "lcl_event_handler IMPLEMENTATION
Kind regards
Keld Gregersen -
CL_GUI_ALV_GRID check date and POP-up appears (that is not required)
Hi all,
we use class CL_GUI_ALV_GRID in a report. The list contains a date field.
If i put into this field a wrong format (example dddd instead of DD.MM.YYYY) i'll get a pop-up as an error message.
But i would like that this error message will display in the message line (lowest line of dynpro).
Another field is defined as an CHAR field and if i put a wrong value into this field the error message displayed in the lowest line of dynpro.
How can i adjust this functionality if i use the date format?
Thanks in advance.
Regards
LutzHi.,
This is the Standard behavior or CL_GUI_ALV_GRID. To suppress the popup log you have to deactivate the protocol display.
pass space to the method ACTIVATE_DISPLAY_PROTOCOL( ) of class CL_GUI_ALV_GRID to suppress popup log.
DATA: o_grid TYPE REF TO cl_gui_alv_grid.
o_grid->activate_display_protocol( space ). " To deactivate Protocol display
do this in PBO.
hope this helps u.,
Thanks & Regards,
Kiran -
Problem with Custom container - cl_gui_custom_container/cl_gui_alv_grid
Hi,
I want to reuse the same custom container screen for a different data.
First screen there will be button 1 and button 2
if I click button 1 then calculate and display data in custom container, if button 2 is clicked then calculate and display data with in the same custom container.
For this
1. Created Custom container - CONTAINER
2. In program defined and created custom container and custom alv grid
g_custom_container TYPE REF TO cl_gui_custom_container,
alv_grid TYPE REF TO cl_gui_alv_grid.
IF g_custom_container IS INITIAL.
CREATE OBJECT g_custom_container
EXPORTING
container_name = 'CONTAINER'.
CREATE OBJECT alv_grid
EXPORTING
i_parent = g_custom_container.
ENDIF.
3. Display data using CALL METHOD alv_grid->set_table_for_first_display
every thing works great for button 1
4. when button 2 is clicked then calculate and display different set of data in same custom container which is used earlier.
5. here I used
call method alv_grid->free.
call method g_custom_container->free.
6. create above objects once again and tried to use
call method alv_grid->set_table_for_first_display
, to reuse the same custom container 'CONTAINER' again for a different set of data and getting ABAP dump.
In debug mode, when I used the above method FREE for both ALV_GRID and G_CUSTOM_CONTAINER objects are not clearing.
Please let me know how can I reuse the same container for a different set of data when button2 is pressed.
Thanks in advance,
Krishna
Please use code tags to format your code and post in the correct forum
Edited by: Rob Burbank on Oct 1, 2010 2:37 PMHello Krishna
I would recommend to use a different approach instead of trying to initialize your container instances:
DATA:
go_container_1 TYPE REF TO cl_gui_custom_container,
go_container_2 TYPE REF TO cl_gui_custom_container,
go_grid_1 TYPE REF TO cl_gui_alv_grid,
go_grid_2 TYPE REF TO cl_gui_alv_grid.
" NOTE: Do this coding BEFORE calling the screen
* (1) Create 2 containers
CREATE OBJECT g_container_1
EXPORTING
container_name = 'CONTAINER'.
CREATE OBJECT g_container_2
EXPORTING
container_name = 'CONTAINER'.
" NOTE: If it is not possible to use the same container name then either create an additional
" dummy screen having a second CUSTOM_CONTROL element or replace
" the customer containers with docking containers -> here you do not need to give a container name
* (2) Create 2 grid instances using a different container
* (3) Link the first container to the screen using its LINK method:
CALL METHOD go_container_1
EXPORTING
repid = <...>
dynnr = <...>.
* (4) Perhaps you need to define a second dummy screen to which you link the second container
* (5) Display first grid instance (as default)
Now when the user pushes button 2 (to display the second grid) link container_1 to the dummy screen
and link container_2 to your main screen.
Regards
Uwe -
Dialog problem using tabstrip & cl_gui_alv_grid
Hi All,
I have created a dialog program which has 2 tab strips. On first I am displaying data n a table control & on other tabstrip display same data using grid. Here to display data in grid I have used set_table_for_first_display of class cl_gui_alv_grid.
The data is displayed successfully. But when I select second tab and return to first tab it still shows the grid on first tab in front.
Kindly tell me what I am missing.
Regards,
Dilip
Following is my code:
REPORT ZTEMP02.
controls: tab type tabstrip,
tab_c type tableview using screen 101 .
data : cont1 type ref to cl_gui_custom_container,
grid type ref to cl_gui_alv_grid.
data : imara like mara occurs 1 with header line.
data zmara type LVC_T_FCAT.
data wa_mara like line of zmara.
data flag .
select * from mara into table imara up to 100 rows.
call screen 100.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
text
MODULE USER_COMMAND_0100 INPUT.
case sy-ucomm.
when 'T1'.
tab-activetab = 'T1'.
FLAG = SPACE.
when 'T2'.
tab-activetab = 'T2'.
WHEN 'EXT'.
LEAVE PROGRAM.
endcase.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0102 OUTPUT
text
MODULE STATUS_0102 OUTPUT.
if FLAG is initial.
create object :
cont1
exporting
container_name = 'CONT',
grid
exporting
I_PARENT = cont1.
FLAG = 'X'.
endif.
call method grid->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
i_structure_name = 'MARA'
changing
it_outtab = imara[].
ENDMODULE. " STATUS_0102 OUTPUTHave you attached a subscreen to tab T1 .
You will also have to use Call subscreen . -
Events in CL_GUI_ALV_GRID - PAI
Hi All,
I designed the screen like below
I am using doc container with split one is for small ALV grid and next is for text editor. - Upper Portion of screen (Upper portion is splited vertically for alv grid and text editor)
in the bottom of screen i have tabstrip in each tab it display the detailed ALV grid. - Bottom of screen
When you click on upper portion of alv grid, the data is displayed in below tabs of ALV and long text in text editor.
Tabstrip data is based on the upper portion of alv, it is like itemdata and header data.
i used hotspot event in upper portion of alv to select the row and based on the row selected, bottom portion of data should display in the alv grids.
But when i select the row it is not triggering the PAI event and it is triggering the PERFORM handle_hotspot_click USING e_row_id e_column_id es_row_no .
how to trigger the PAI event when we click the double click or hot spot in alv grid.
in alv tree we have set_registered_events but not alv grid.
Please help me.
Thanks,
Srinivas Manai.Hi ,
I guess the follwing code will be useful to you.
Define a class. In that define a method for event hotspot_click of cl_gui_alv_grid like below.
CLASS-METHODS:
handle_hotspot_click
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no.
In the method implementation write the desired code.
Reward if useful
Regards,
Sravanthi. -
Cl_gui_alv_grid - I get a blank screen
I seem to be having a problem with my screen. The issue is that I am using cl_gui_alv_grid to display an ALV. However, I call set_table_for_first_display, I get a blank screen. I have verified that I have data in the field cat, outtab, and sort tables. Any ideas?
SCREEN 2000
PROCESS BEFORE OUTPUT.
MODULE status_2000.
MODULE create_fieldcat.
MODULE create_obj.
MODULE call_alv.
PROCESS AFTER INPUT.
module user_command_2000.
module exit at exit-command.
MODULE STATUS_2000 OUTPUT.
SET pf-status '2000'.
SET TITLEBAR '2000'.
ENDMODULE. " STATUS_2000 OUTPUT
*& Module CREATE_FIELDCAT OUTPUT
* text
MODULE CREATE_FIELDCAT OUTPUT.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'PSPID'.
wa_fieldcat-tabname = 'IT_CONTRACT'.
wa_fieldcat-ref_field = 'PSPID'.
wa_fieldcat-ref_Table = 'PROJ'.
wa_fieldcat-KEY = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'POST1'.
wa_fieldcat-tabname = 'IT_CONTRACT'.
wa_fieldcat-ref_field = 'POST1'.
wa_fieldcat-ref_Table = 'PROJ'.
wa_fieldcat-KEY = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'SO_VALUE'.
wa_fieldcat-coltext = 'Sales Order Value'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'BILLED'.
wa_fieldcat-coltext = 'Amount Billed'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'NEBTR'.
wa_fieldcat-coltext = 'Cash Received'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'DMBTR'.
wa_fieldcat-coltext = 'Retention'.
wa_fieldcat-do_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'PERCENT_BILLED'.
wa_fieldcat-coltext = 'Percent Billed'.
wa_fieldcat-no_sum = 'X'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_sort.
wa_sort-spos = '1'.
wa_sort-fieldname = 'PSPID'.
wa_sort-SUBTOT = 'X'.
APPEND wa_sort TO it_sort.
ENDMODULE. " CREATE_FIELDCAT OUTPUT
MODULE CREATE_OBJ OUTPUT.
IF g_custom_container IS INITIAL.
CREATE object g_custom_container
EXPORTING
container_name = 'CCONTAINER'.
CREATE object grid
EXPORTING
i_parent = g_custom_container.
CREATE object g_handler.
SET HANDLER g_handler->top_of_page FOR grid.
ENDIF.
ENDMODULE. " CREATE_OBJ OUTPUT
MODULE CALL_ALV OUTPUT.
CALL METHOD grid->set_table_for_first_display
EXPORTING
* i_buffer_active =
* i_bypassing_buffer =
* i_consistency_check =
* i_structure_name =
* is_variant =
* i_save =
* i_default = 'X'
* is_layout =
is_print = wa_print
* it_special_groups =
* it_toolbar_excluding =
* it_hyperlink =
* it_alv_graphics =
* it_except_qinfo =
* ir_salv_adapter =
CHANGING
it_outtab = it_contract
it_fieldcatalog = it_fieldcat
it_sort = it_sort
* it_filter =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Davis
I believe the problem may be that I don't have the container in the attributes list of the screen. I am not sure why it isn't there.I did, if this is what you mean:
MODULE CREATE_OBJ OUTPUT.
IF g_custom_container IS INITIAL.
CREATE object g_custom_container
EXPORTING
container_name = 'CCONTAINER'.
CREATE object grid
EXPORTING
i_parent = g_custom_container.
CREATE object g_handler.
SET HANDLER g_handler->top_of_page FOR grid.
ENDIF.
ENDMODULE. " CREATE_OBJ OUTPUT
Regards,
Davis -
Help needed in using cl_gui_alv_grid and cl_gui_custom_container.
Hi experts,
I have created a screen with custom control( cl_gui_custom_container ) and displayed a alv using cl_gui_alv_grid in the screen. I have to enter tha values into the alv displayed on screen.The problem here is i have to make 2 fields as mandatory on the alv displayed on the screen.
Is it possible to get screen name of these fields so that i can process it in the PBO or is their some way??
Thanks in advance
regards,
AshwinAnyway the fields that are getting displayed is from the structure u have created right?
So in PBO, u can use the field names like 'MATNR'.
If u want to process after selecting u have to right in PAI like
CASE sy-ucomm.
WHEN 'MATNR'.
In oops for selected row processing
CASE e_ucomm.
WHEN 'FCODE'.
CALL METHOD o_alvgrid->get_selected_rows
IMPORTING
et_index_rows = i_selected_rows
* ET_ROW_NO =
IF i_selected_rows[] IS INITIAL.
MESSAGE i153 WITH text-009.
LEAVE LIST-PROCESSING.
ENDIF.
CLEAR: w_reviewed_mat.
* w_reviewed_mat-reviewed = c_x.
* w_reviewed_mat-reviewedby = sy-uname.
* w_reviewed_mat-reviewedon = sy-datum.
LOOP AT i_selected_rows INTO w_selected_rows.
READ TABLE i_output INTO w_output INDEX w_selected_rows-index.
IF sy-subrc EQ 0.
w_reviewed_mat-matnr = w_output-matnr.
ENDIF.
APPEND w_reviewed_mat TO i_reviewed_mat.
CLEAR: w_reviewed_mat-matnr.
ENDLOOP.
* MODIFY zzcs_mat FROM TABLE i_reviewed_mat.
WHEN OTHERS.
ENDCASE. -
Can we use cl_gui_alv_grid to give input on the screen?
Hi experts ,
Can we use <b>cl_gui_alv_grid</b> to give input on the screen and save the input in some internal table which is passed as a parameter with the calling method of
cl_gui_alv_grid??
Thanks in advance
regards,
AshwinOR you want to can set any particular field by
ls_fcat-edit = 'X'.
in the field catalog for that field .
Assign the points if it helps you ...
Gaurang -
Edittable ALV grid using CL_GUI_ALV_GRID supported in ERP 4.7
Hi..
I like to know whether EDItable ALV grid is Supported in version 4.7 .....
..Thanks & Regards
AshishHi..
1. To make the whole grid editable: pass EDIT field for layout structure(lvc_s_layo) as 'X', in this way your whole grid would be editable.
2. To make few fields editable: pass EDIT field for catalog(lvc_t_fcat) for the relevant fields as 'X', your grid with those relevant fields will be editable.
3. To make columns editable: This is bit tricky...you have to include a field with type LVC_T_STYL(this is a table type) in your internal table which is used for final display, you have to append all those fields in this table type field and pass the field style the value as "cl_gui_alv_grid=>mc_style_enabled"(this means making the field ediable)
Regards,
Mark -
Using cl_gui_alv_grid class in report , but when no data , entire session closed ?
Hi ,
I am using cl_gui_alv_grid for one of my report . It is working fine when there are reocords , but when there is no record
entire session will be closed from selection screen itself.
Having class with data /method declaration and an event class ..
Appreciate your help..
Kind regards
RamaHello Siva ,
Code an EVENT for NO DATA in the main class. I guess you have already done the same
Having class with data /method declaration and an event class ..
Now while implementing the method for that event , don't forget to write LEAVE LIST-PROCESSING also.
For eg :
Now RAISE this event when SY-SUBRC is NE 0 for the SELECT statement i.e no data found. -
Regarding ALV ( To be displayed in Tree Format)
Hi all,
I am working on a ALV report which is to be displayed in Tree Structure . I found some demo programs within SAP .. but do we have an Alternative .. all those Demos use OOPS concept .. Can this Report be done without using OOPS in ALV.
Please Suggest.
Thanks & Regards
SrinivasHi,
This is a ALV Report with tree structure.
report zwmr_pick_status_report no standard page heading
message-id zw.
Type Pools *
type-pools: icon, slis.
Tables *
tables: tvst,
likp,
t30b,
vekp,
zpallettr,
zvantr.
Types *
types:
begin of ty_data,
lgtor like likp-lgtor, " door
vbeln like likp-vbeln, " delivery
wbstk like vbuk-wbstk, " Goods movement status
kostk like vbuk-kostk, " Picking status
posnr like lips-posnr, " item
route like likp-route, " route
wadat like likp-wadat, " goods issue date
lvsta like vbup-lvsta, " warehouse status
packvorschr like vekp-packvorschr, " pack mnemonic
exidv like vekp-exidv, " handling unit
zpallet_no(10), "like zpallettr-zpallet_no, " pallet no
zcount_check like zpallettr-zcount_check," count check flag
zvan_no(10), "like zvantr-zvan_no, " van no
zvan_print like zvantr-zvan_print, " van manifest print
zeod_print like zvantr-zeod_print, " eod manifest print
zzpackclass like vekp-zzpackclass, " package class
zzti like vekp-zzti, " T.I. value
end of ty_data.
Data *
ranges: r_del for likp-vbeln,
r_lgtor for likp-lgtor.
ranges: r_vanno for zvantr-zvan_no,
r_palno for zpallettr-zpallet_no.
data: begin of number_range occurs 0,
mark(1),
id(3),
num(10) type n,
desc like zpalletmd-zdesc,
end of number_range.
data: t_disp_tab type standard table of zpickdisp,
t_data_tab type ty_data occurs 0 with header line,
t_disp_head type standard table of zpickhead.
data: w_numrnge like number_range,
w_number(10) type n.
data: t_likp like likp occurs 0 with header line,
t_lips like lips occurs 0 with header line,
t_vbuk like vbuk occurs 0 with header line,
t_vbup like vbup occurs 0 with header line,
t_vepo like vepo occurs 0 with header line,
t_vekp like vekp occurs 0 with header line,
t_vantr like zvantr occurs 0 with header line,
t_pallettr like zpallettr occurs 0 with header line,
w_likp like likp,
w_lips like lips,
w_vbuk like vbuk,
w_vbup like vbup,
w_vepo like vepo,
w_vekp like vekp.
ALV DATA *****
data:
g_grid type ref to cl_gui_alv_grid,
g_sort type slis_t_sortinfo_alv,
g_custom_container type ref to cl_gui_custom_container,
g_layout type slis_layout_alv,
gt_fieldcat type slis_t_fieldcat_alv,
t_fldcat like line of gt_fieldcat,
g_keyinfo type slis_keyinfo_alv,
gt_events type slis_t_event,
gs_event type slis_alv_event,
w_sy_repid like sy-repid.
data: begin of seltab occurs 0.
include structure rsparams.
data: end of seltab.
SYSTEM GENERATED TABLE CONTROL DATA ********
DECLARATION OF TABLECONTROL 'TC_TABCON' ITSELF
controls: tc_tabcon type tableview using screen 0100.
LINES OF TABLECONTROL 'TC_TABCON'
data: g_tc_tabcon_lines like sy-loopc.
data: ok_code like sy-ucomm.
Constants *
constants: c_data_class like klah-class value 'DG_DATA',
c_mat_class like rmclf-klart value '001',
c_pack like lips-mtart value 'VERP',
c_a(1) value 'A',
c_b(1) value 'B',
c_c(1) value 'C',
c_yes(1) value 'X',
c_no(1) value ' '.
Selection screen *
standard report select options block
selection-screen begin of block a with frame title text-002.
select-options:
s_wadat for likp-wadat no-extension obligatory. " Goods Issue Date
*parameters: "TR01-
p_vstel like tvst-vstel obligatory. " Shipping Point "TR01-
select-options: "TR01+
p_vstel for tvst-vstel. " Shipping Point "TR01+
select-options:
s_lfart for likp-lfart, " Delivery type
s_lgtor for t30b-lgtor, " Door selection
s_exidv for vekp-exidv, " Handling Unit
s_vbeln for likp-vbeln. " Delivery
parameters:
p_exdata as checkbox. " Show extra columns flag
selection-screen end of block a.
van/pallet specific select options block
selection-screen begin of block b with frame title text-001.
select-options:
s_palno for zpallettr-zpallet_no, " no-extension,
s_vanno for zvantr-zvan_no. " no-extension.
selection-screen end of block b.
Value Request Events *
at selection-screen on value-request for s_palno-low.
clear: number_range, w_number .
refresh number_range.
select numbers and display pop up screen for selection
perform select_pal_nos.
s_palno-low = w_number.
at selection-screen on value-request for s_palno-high.
clear: number_range, w_number .
refresh number_range.
select numbers and display pop up screen for selection
perform select_pal_nos.
s_palno-high = w_number.
at selection-screen on value-request for s_vanno-low.
clear: number_range, w_number .
refresh number_range.
select numbers and display pop up screen for selection
perform select_van_nos.
s_vanno-low = w_number.
at selection-screen on value-request for s_vanno-high.
clear: number_range, w_number .
refresh number_range.
select numbers and display pop up screen for selection
perform select_van_nos.
s_vanno-high = w_number.
At Selection Screen *
at selection-screen.
perform validate_selections.
Initialization *
initialization.
Start of selection *
start-of-selection.
clear all data tables
clear: t_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr,
w_likp,
w_lips,
w_vbuk,
w_vbup,
w_vepo,
w_vekp.
refresh: t_likp,
t_lips,
t_vbuk,
t_vbup,
t_vepo,
t_vantr,
t_pallettr.
select data for ALV
due to different input parameters being used, to streamline the data
selection process, different selection methods are required
if not s_vanno is initial
or not s_palno is initial.
if selecting by van/pallet number, need to select the data from the
handling unit upwards to delivery
perform select_data_up.
else.
otherwise the data can be selected from the delivery downwards
perform select_data_down.
endif.
End of selection *
end-of-selection.
call hierarchical ALV display function module
call function 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
exporting
i_callback_program = 'ZWMR_PICK_STATUS_REPORT'
i_callback_pf_status_set = 'SET_STATUS'
i_callback_user_command =
'USER_COMMAND' "custom gui status form
is_layout = g_layout "user command form
it_fieldcat = gt_fieldcat
it_sort = g_sort
it_events = gt_events
i_tabname_header = 't_disp_head'
i_tabname_item = 't_disp_tab'
i_structure_name_header = 'ZPICKHEAD'
i_structure_name_item = 'ZPICKDISP'
is_keyinfo = g_keyinfo
tables
t_outtab_header = t_disp_head
t_outtab_item = t_disp_tab.
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
FORMS *
Includes inserted by Screen Painter Wizard. DO NOT CHANGE THIS LINE!
include zwmr_pick_status_reporto01 .
include zwmr_pick_status_reporti01 .
include zwmr_pick_status_reportf01 .
*& Form select_pal_nos
select pallet numbers for search help
form select_pal_nos.
data: begin of t_palno occurs 0,
zpallet_no like zpallettr-zpallet_no,
end of t_palno.
select all available pallet numbers
select distinct zpallet_no from zpallettr
into corresponding fields of table t_palno.
loop at t_palno.
get pallet id
select single zpallet_id from zpallettr
into number_range-id
where zpallet_no = t_palno-zpallet_no.
get pallet description
select single zdesc from zpalletmd
into number_range-desc
where zpallet_id = number_range-id.
number_range-num = t_palno-zpallet_no.
append to search help table
append number_range.
endloop.
call pop up dialog box
call screen 0100 starting at 5 5.
endform. " select_pal_nos
*& Form select_van_nos
select van numbers for search help
form select_van_nos.
data: begin of t_vanno occurs 0,
zvan_no like zvantr-zvan_no,
end of t_vanno.
select available van numbers
select distinct zvan_no from zvantr
into corresponding fields of table t_vanno.
loop at t_vanno.
select van id
select single zvan_id from zvantr
into number_range-id
where zvan_no = t_vanno-zvan_no.
select van description (maintained in pallet tables)
select single zdesc from zpalletmd
into number_range-desc
where zpallet_id = number_range-id.
number_range-num = t_vanno-zvan_no.
append to search help table
append number_range.
endloop.
call pop up dialog box
call screen 0100 starting at 5 5.
endform. " select_van_nos
*& Form select_data_down
select data if selecting from delivery down
form select_data_down.
select all deliveries from LIKP that fulfill selection criteria
select * from likp into table t_likp
where vbeln in s_vbeln
and vstel eq p_vstel "TR01-
and vstel in p_vstel
and lgtor in s_lgtor
and wadat in s_wadat
and lfart in s_lfart.
if sy-subrc ne 0.
no data found
message i007.
exit.
endif.
if not t_likp[] is initial.
select sales document headers from VBUK
select * from vbuk into table t_vbuk
for all entries in t_likp
where vbeln eq t_likp-vbeln.
select all relevant delivery items from LIPS
select * from lips into table t_lips
for all entries in t_likp
where vbeln eq t_likp-vbeln
and pstyv ne 'ZPAC'
and pstyv ne 'ZGDP' "TR02+
and lfimg gt 0. "TR01+
endif.
if not t_lips[] is initial.
select all sales document line items from VBUP
select * from vbup into table t_vbup
for all entries in t_lips
where vbeln eq t_lips-vbeln
and posnr = t_lips-posnr.
select corresponding handling unit ID's (venum)
TR03 Replace start
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
select * from vepo
inner join vekp on vepovenum = vekpvenum
appending corresponding fields of table t_vepo
for all entries in t_lips
where vepo~vbeln = t_lips-vbeln
and vepo~posnr = t_lips-posnr
and vepo~matnr = t_lips-matnr
and vepo~charg = t_lips-charg
and vekp~exidv in s_exidv.
TR03 Replace end
endif.
build process table
perform move_to_table.
endform. "select_data_down
*& Form select_data_up
select data if selecting from van/pallet up
form select_data_up.
if not s_vanno is initial.
if van then select van numbers and hence pallet numbers
select * from zvantr into table t_vantr
where zvan_no in s_vanno.
and vstel eq p_vstel."TR01-
if not t_vantr[] is initial.
select * from zpallettr into table t_pallettr
for all entries in t_vantr
where zpallet_no eq t_vantr-zpallet_no.
and vstel eq p_vstel."TR01-
endif.
else.
otherwise can get pallet numbers directly
select * from zpallettr into table t_pallettr
where zpallet_no in s_palno.
and vstel eq p_vstel."TR01-
endif.
if not t_pallettr[] is initial.
from the pallet nos. we can select the handling units
select * from vekp into table t_vekp
for all entries in t_pallettr
where exidv eq t_pallettr-exidv
and exidv ne space
and exidv in s_exidv "TR03+
and ( exida = 'E' "TR01+
or exida = 'F' ). "TR01+
endif.
if not t_vekp[] is initial.
build vbeln range from t_vekp.
loop at t_vekp.
r_del-sign = 'I'.
r_del-option = 'EQ'.
r_del-low = t_vekp-vpobjkey.
append r_del.
endloop.
select all deliveries from LIKP that correspond to HU's
select * from likp into table t_likp
where vbeln in r_del
and wadat in s_wadat
and lfart in s_lfart.
endif.
if not t_likp[] is initial.
select sales document headers from VBUK
select * from vbuk into table t_vbuk
for all entries in t_likp
where vbeln eq t_likp-vbeln.
select all relevant delivery items from LIPS
select * from lips into table t_lips
for all entries in t_likp
where vbeln eq t_likp-vbeln
and pstyv ne 'ZPAC'
and pstyv ne 'ZGDP' "TR02+
and lfimg gt 0. "TR01+
endif.
if not t_lips[] is initial.
select all sales document line items from VBUP
select * from vbup into table t_vbup
for all entries in t_lips
where vbeln eq t_lips-vbeln
and posnr = t_lips-posnr.
select corresponding handling unit ID's (venum)
select * from vepo appending corresponding fields of table t_vepo
for all entries in t_lips
where vbeln = t_lips-vbeln
and posnr = t_lips-posnr
and matnr = t_lips-matnr
and charg = t_lips-charg.
endif.
build process table
perform move_to_table.
endform. "select_data_up
*& Form move_to_table
move data to processing table
form move_to_table.
loop at t_vepo.
clear t_data_tab.
delivery lines.
clear w_lips.
read table t_lips with key vbeln = t_vepo-vbeln
posnr = t_vepo-posnr
into w_lips.
move-corresponding w_lips to t_data_tab.
sales document line items
clear w_vbup.
read table t_vbup with key vbeln = t_vepo-vbeln
posnr = t_vepo-posnr
into w_vbup.
if w_vbup-kosta = space. "TR01-
not relevant for picking
delete t_vepo. "TR01-
continue. "TR01-
else. "TR01-
move-corresponding w_vbup to t_data_tab.
endif. "TR01-
sales doc header
clear w_vbuk.
read table t_vbuk with key vbeln = t_vepo-vbeln
into w_vbuk.
move-corresponding w_vbuk to t_data_tab.
delivery header
clear w_likp.
read table t_likp with key vbeln = t_vepo-vbeln
into w_likp.
move-corresponding w_likp to t_data_tab.
select handling unit info using vepo entry
clear w_vekp.
if t_vekp[] is initial.
select single * from vekp into w_vekp
where venum = t_vepo-venum.
else.
read table t_vekp with key venum = t_vepo-venum
into w_vekp.
if sy-subrc ne 0.
select single * from vekp into w_vekp
where venum = t_vepo-venum.
endif.
endif.
move-corresponding w_vekp to t_data_tab.
select pallet / van load information
select single zpallet_no zcount_check from zpallettr
into (t_data_tab-zpallet_no,
t_data_tab-zcount_check)
where exidv eq w_vekp-exidv.
if not t_data_tab-zpallet_no in s_palno. "TR01+
continue. "TR01+
endif. "TR01+
if sy-subrc = 0.
select single zvan_no zvan_print zeod_print from zvantr
into (t_data_tab-zvan_no,
t_data_tab-zvan_print,
t_data_tab-zeod_print)
where zpallet_no eq t_data_tab-zpallet_no.
if not t_data_tab-zvan_no in s_vanno. "TR01+
continue. "TR01+
endif. "TR01+
endif.
append t_data_tab.
endloop.
*-----> TR01+ start
If the delivery has yet to be packed, then need to include in report
Thus delete t_lips here and if any entries left after looping through
t_vepo, these will also need to be added to t_data_tab
if the selection is by handling unit though we do not want these"TR03+
if s_exidv is initial. "TR03+
loop at t_vepo.
read table t_lips with key vbeln = t_vepo-vbeln
posnr = t_vepo-posnr.
if sy-subrc = 0.
delete t_lips index sy-tabix.
endif.
endloop.
if not t_lips[] is initial.
move any unpacked items to the data table
perform move_lips_to_table.
endif.
endif. "TR03+
*<---- TR01+ End
get relevant status icons
perform select_icons.
prepare ALV data
perform prepare_alv.
endform. " select_data
*& Form select_icons
select icons for display and move data to display table
form select_icons.
data: w_disp_tab like zpickdisp,
w_disp_head like zpickhead,
w_color like zpickdisp-color,
ov_icon like zpickdisp-ov_icon,
gi_icon like zpickdisp-gi_icon,
to_icon like zpickdisp-to_icon,
lp_icon like zpickdisp-lp_icon,
pc_icon like zpickdisp-pc_icon,
lv_icon like zpickdisp-lv_icon,
vm_icon like zpickdisp-vm_icon,
em_icon like zpickdisp-em_icon,
t_ovst_tab like t_disp_tab with header line.
constants: c_col1(3) value 'C10',
c_col2(3) value 'C20'.
sort t_data_tab by lgtor vbeln.
w_color = c_col2.
loop at t_data_tab.
at new lgtor.
fill ALV header table
clear w_disp_head.
w_disp_head-lgtor = t_data_tab-lgtor.
append w_disp_head to t_disp_head.
endat.
goods issue status & overall amber/green only
case t_data_tab-wbstk.
when c_c.
move icon_green_light to gi_icon.
move icon_green_light to ov_icon.
when others.
move icon_red_light to gi_icon.
move icon_yellow_light to ov_icon.
endcase.
transfer order status
case t_data_tab-lvsta.
when c_a.
move icon_red_light to to_icon.
when c_b.
move icon_yellow_light to to_icon.
when c_c.
move icon_green_light to to_icon.
when space.
write N/A
to_icon = 'N/A'.
endcase.
loaded to pallet status
if not t_data_tab-zpallet_no is initial.
move icon_green_light to lp_icon.
else.
move icon_red_light to lp_icon.
endif.
pallet count status
if not t_data_tab-zcount_check is initial.
move icon_green_light to pc_icon.
else.
move icon_red_light to pc_icon.
endif.
loaded to van status
if not t_data_tab-zvan_no is initial.
move icon_green_light to lv_icon.
else.
move icon_red_light to lv_icon.
endif.
van manifest status
if not t_data_tab-zvan_print is initial.
move icon_green_light to vm_icon.
else.
move icon_red_light to vm_icon.
endif.
end of day manifest status
if not t_data_tab-zeod_print is initial.
move icon_green_light to em_icon.
else.
move icon_red_light to em_icon.
endif.
move working data table to display table
move-corresponding t_data_tab to w_disp_tab.
w_disp_tab-ov_icon = ov_icon.
w_disp_tab-gi_icon = gi_icon.
w_disp_tab-to_icon = to_icon.
w_disp_tab-lp_icon = lp_icon.
w_disp_tab-pc_icon = pc_icon.
w_disp_tab-lv_icon = lv_icon.
w_disp_tab-vm_icon = vm_icon.
w_disp_tab-em_icon = em_icon.
w_disp_tab-color = w_color.
fill N/A values for initial fields for display
if w_disp_tab-packvorschr is initial.
w_disp_tab-packvorschr = 'N/A'.
endif.
if w_disp_tab-exidv is initial.
w_disp_tab-exidv = 'N/A'.
endif.
if w_disp_tab-zpallet_no is initial.
write 'N/A' to w_disp_tab-zpallet_no.
endif.
if w_disp_tab-zvan_no is initial.
write 'N/A' to w_disp_tab-zvan_no.
endif.
display different color for new doc number
at end of vbeln.
if w_color = c_col1.
w_color = c_col2.
elseif w_color = c_col2.
w_color = c_col1.
endif.
endat.
append w_disp_tab to t_disp_tab.
clear w_disp_tab.
endloop.
we have all the icons in display but need to check the overall status
as this refers to the line items
green and amber statuses already set and use the same criteria as the
goods issue status unless detected as red here
data: ov_stat_red(1).
clear w_disp_tab.
sort t_disp_tab by vbeln.
loop at t_disp_tab into w_disp_tab.
at new vbeln.
check all line items for delivery
loop at t_data_tab where vbeln = w_disp_tab-vbeln.
if t_data_tab-lvsta = c_a.
set overall status to red
ov_stat_red = c_yes.
exit.
else.
leave green/amber status icon as previosly determined
endif.
endloop.
if ov_stat_red = c_yes.
set overall status to red for all items in that delivery
clear ov_stat_red.
move icon_red_light to w_disp_tab-ov_icon.
modify t_disp_tab from w_disp_tab transporting ov_icon
where vbeln = w_disp_tab-vbeln.
endif.
endat.
endloop.
endform. " select_icons
*& Form fill_layout
fill ALV layout parameters
form fill_layout.
clear g_layout.
g_layout-colwidth_optimize = c_yes. " column width optimisation
g_layout-zebra = space. " alternate line colors
g_layout-box_fieldname = 'MARK'. " checkbox fieldname
g_layout-info_fieldname = 'COLOR'. " highlight row indicator
g_layout-no_vline = space. " vertical line
g_layout-key_hotspot = space. " hotspot field
g_layout-f2code = 'PICK'. " F2 ok_code
g_layout-numc_sum = c_yes. " sum numc fields
g_layout-box_tabname = 't_disp_head'. " checkbox table name
g_layout-expand_fieldname = 'EXPAND'. " expand field name
endform. " fill_layout
*& Form fill_sort
fill ALV sort table
form fill_sort.
data: w_g_sort type slis_sortinfo_alv.
w_g_sort-spos = 1.
w_g_sort-fieldname = 'LGTOR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
append w_g_sort to g_sort.
w_g_sort-spos = 2.
w_g_sort-fieldname = 'VBELN'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
append w_g_sort to g_sort.
w_g_sort-spos = 3.
w_g_sort-fieldname = 'POSNR'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
append w_g_sort to g_sort.
w_g_sort-spos = 4.
w_g_sort-fieldname = 'WADAT'.
w_g_sort-tabname = 't_disp_tab'.
w_g_sort-up = c_yes.
append w_g_sort to g_sort.
endform. " fill_sort
*& Form fill_fieldcat
Fill field category structure for ALV
form fill_fieldcat.
clear t_fldcat.
create field catalogue for header table
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZWMR_PICK_STATUS_REPORT'
i_internal_tabname = 't_disp_head'
i_structure_name = 'ZPICKHEAD'
i_client_never_display = c_yes
changing
ct_fieldcat = gt_fieldcat[].
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
ceate field catalogue for items table
call function 'REUSE_ALV_FIELDCATALOG_MERGE'
exporting
i_program_name = 'ZWMR_PICK_STATUS_REPORT'
i_internal_tabname = 't_disp_tab'
i_structure_name = 'ZPICKDISP'
i_client_never_display = c_yes
changing
ct_fieldcat = gt_fieldcat[].
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
endif.
modify field catalogue for this report
set no display flag if not requested on selection screen
if p_exdata ne c_yes.
t_fldcat-no_out = c_yes.
modify gt_fieldcat from t_fldcat transporting no_out
where fieldname eq 'PACKVORSCHR'
or fieldname eq 'EXIDV'
or fieldname eq 'ZPALLET_NO'
or fieldname eq 'ZVAN_NO'
or fieldname eq 'ZZPACKCLASS'
or fieldname eq 'ZZTI'.
endif.
set no display flag for item level LGTOR field
t_fldcat-no_out = c_yes.
modify gt_fieldcat from t_fldcat transporting no_out
where fieldname eq 'LGTOR'
and tabname eq 't_disp_tab'.
prevent display of technical fields
t_fldcat-tech = c_yes.
modify gt_fieldcat from t_fldcat transporting tech
where fieldname eq 'EXPAND'
or fieldname eq 'SELKZ'.
set vbeln as key
t_fldcat-key = c_yes.
modify gt_fieldcat from t_fldcat transporting key
where fieldname eq 'VBELN'.
prevent scrolling for info fields
t_fldcat-fix_column = c_yes.
modify gt_fieldcat from t_fldcat transporting fix_column
where fieldname eq 'VBELN'.
endform. " fill_fieldcat
*& Form prepare_ALV
Fill ALV parameters
form prepare_alv.
fill ALV key info
g_keyinfo-header01 = 'LGTOR'.
g_keyinfo-item01 = 'LGTOR'.
fill ALV events
gs_event-name = 'TOP_OF_PAGE'.
gs_event-form = 'TOP_OF_PAGE'.
append gs_event to gt_events.
fill ALV sort table
perform fill_sort.
fill ALV layout structure
perform fill_layout.
fill ALV field category
perform fill_fieldcat.
endform. " prepare_ALV
*& Form user_command
form called on user command from ALV list
form user_command using r_ucomm like sy-ucomm
rs_selfield type slis_selfield.
data: index type i,
w_disp_head like line of t_disp_head,
w_door like likp-lgtor.
clear r_lgtor. refresh r_lgtor.
case r_ucomm.
when 'PICK'. " Double click line
when 'VANM'. " Van Manifest button
read the header table where has been selected
loop at t_disp_head into w_disp_head where mark = c_yes.
r_lgtor-sign = 'I'.
r_lgtor-option = 'EQ'.
r_lgtor-low = w_disp_head-lgtor.
append r_lgtor.
endloop.
print the van manifest
perform print_van_manifest tables r_lgtor.
when 'EODM'. " EOD Manifest button
read the header table where has been selected
loop at t_disp_head into w_disp_head where mark = c_yes.
r_lgtor-sign = 'I'.
r_lgtor-option = 'EQ'.
r_lgtor-low = w_disp_head-lgtor.
append r_lgtor.
endloop.
print the end of day manifest
perform print_eod_manifest tables r_lgtor.
when 'REFR'. "Refresh
refresh display
w_sy_repid = sy-repid.
call function 'RS_REFRESH_FROM_SELECTOPTIONS'
exporting
curr_report = w_sy_repid
tables
selection_table = seltab.
exceptions
not_found = 1
no_report = 2
others = 3.
if sy- -
Hi all,
I have displayed data in alv.and the error condition is that if for a material if it has more than one S as ok_status records then it should throw an error. This logic is working fine.
Now suppose at first time user had entered S through keyboard which fails the condition so it throws an error first time.
Now user can change the ok status back to I or O from S (through keyboard although f4 help is available) which satisfies the conditon so that record should be saved. but when user presses save button then in the ALV display the changed status I or O for that record again converted back to status S automatically. and again gives an error.
if we try third time then it allows to save with record other than s ok status i.e. I or O.
this problem is comming only when we change the value through keyboard. If we select value using f4 help then whole logic is working fine, no problem at all.
Can you please help me out in this regard
Its very urgent.
Thanks & Regards
Ashutosh.Hi,
to exclude toolbar buttons..
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
DATA LS_EXCLUDE TYPE UI_FUNC.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_CUT.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_PASTE_NEW_ROW.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_UNDO.
APPEND LS_EXCLUDE TO LT_EXCLUDE.
CALL METHOD G_GRID1->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
<b> IT_TOOLBAR_EXCLUDING = LT_EXCLUDE</b>
IS_LAYOUT = GS_LAYOUT
CHANGING
IT_FIELDCATALOG = IT_FIELDCAT
IT_OUTTAB = IT_FINAL[].
and you told you are using REUSE_ALV_GRID_DISPLAY_LVC
then in the user_command do this....
then your problem will be solved.
in the top you declare this..
DATA: REF_GRID TYPE REF TO CL_GUI_ALV_GRID.
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
RS_SELFIELD TYPE SLIS_SELFIELD.
*then insert the following code in your USER_COMMAND routine...
IF REF_GRID IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
ENDFORM.
Regards
vijay
Maybe you are looking for
-
Print Button in RepoerViewer tool bar doesn't work!
Post Author: Tasha_k CA Forum: .NET Hello everyone! I have a problem with ReportViewer Print Button once web app is published on clients server - print button just isn't working. Little message is appearing in status bar in Internet Explorer "Done,
-
FMJ2 - Carry forward with budget Line
Hello, I have done a carry forward FMJ2 and everything works perfectly. However the client let me know that they also want the budget line associated to the commitments to be carry forwarded. When I try that, the system gives me error FMAVC005. In "D
-
File deleted from file manager
By mistake I deleted a file from phone memory in the file manager. Is to important to have all the orgianal files in the file manager or do I reload the software. What do I do. i have a E 7.
-
Data Modelling Problem with many additional Fields
Dear All I am extracting transactional data from a CRM system where a number of Customer Fields have been added. There are some 150 additional fields which are all included in a User Append structure and are all related to the transaction ( not mast
-
Hi, I have multipage tiff images. I am loading the image in the jScrollPane. I also have NEXT Button which show the next image of the tiff file in the JscrollPane. Right now i have a PRINT button which prints the image that's in the jscrollpane. I wa