Regarding Class and Characteristics
Can any body give a clear picture on Class and Characteristics
i have seen this in batch and alos in variant it is common concept in SAP please tell the concept behind this
Thanks in Advance
Rajesh
Points will be rewarded
Hi,
when you want to assign different characteristics for a material we use the this concept.
for example in pharma industry when we maintain batch wih characteristics like date of manufacture, though the material is same still we differentiate them it on the basis of batch thus ensuring a FIFO method.
Similarly in Variant against the same materail the customer has a choice to selection the type of product he wants.
so all such characteristics(options) are assigned to a class and then to a material.
regards
sadhu kishore
Similar Messages
-
Customizing FD01 and FB70 using PS Class and Characteristics
Hello SAP Experts
I have the following issue:
My client has a requirement where we need to customize the Customer Master (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS class and characteristics. Your opinions would be much appreciated.
Please kindly give your suggestions. Thanks in advance
Regards,
NikJoao Paulo,
Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
Nik -
Customizing FD01 and FB70 using SAP PS Class and Characteristics
Hello SAP Experts
I have the following issue:
My client has a requirement where we need to customize the Customer Master (FD01) screen and the Invoice Posting Screen (FB70). A few additional fields have to be added by creating a separate tab. I was intending to take Abaper's help and do this using user exits but I have been suggested by the cleint to use SAP PS Class and Characteristics feature to do this. Can someone please throw some light on this feature and how can i create custom fields on FD01 and FB70 screens. Is there a way we could customize these screens using PS characteristics. Your opinions would be much appreciated.
Please kindly chip in your ideas
Regards,
NikJoao Paulo,
Thank you for the response. I have tried to obtain some info from OSS but no luck. Tried all means but there is limited information available.
Nik -
Transfer class and characteristics data from 3.1i system to ECC 6.0 system
I have to develop a program to transfer all the classes and characteristics( tcode cl01 and ct04) in a 3.1i system to an ECC 6.0 system.
I initially planned to use FMs BAPI_CLASS_GETDETAIL to read from 3.1i and BAPI_CLASS_CREATE to load in ECC 6.0.
But then I realized that BAPI_CLASS_GETDETAIL does not exist in 3.1i system.
Could anyone please tell me how to transfer the class and characteristics data from 3.1i to ECC 6.0. What approach and FMs are to be used.
Thanks,
KarthikThanks for the reply Madhu.
We are trying the ALE way, using BD91 and BD92. This way seems to be easier as there is no need to extract data to files.
IDoc is successfuly sent from the 3.1i system but we are not able to see it in ECC 6.0 system.
We are checking up the settings.
Would be very useful if you can provide some more details about the settings to be done.
Thanks,
Karthik -
Link between Class and characteristics created for that class
Hi All,
Is there any table that I can look at to find a link between class and the characteristics created for that class. For all the list of characteristics created I am refereing to CABN table but my requirement is to find the logic to see all the characteristics created for a class. Can anyone suggest me the right table to look at?
Regards,
ShaneHi,
I would like to thank you for your quick response. So based on your thoughts, here is the process i followed to find the characteristics for a existing class, took the Internal class number and used the KSML table to find all the Characteristics created for that class.
To find the list of values assigned to that characteristics, used the AUSP table for that characteristics internal number.
Thank you again for your inputs
Shane. -
Batch Management and Class and Characteristics Assignment
Dear Team,
Recently We Configured Batch Management in SD, and Batch is determining in Sales order, delivery and Billing. Its working fine.
Issue-1: While posting stock (Quality server) with moment type 561, production date entered manually but system not calculating Expiry date automatically, i maintained Total shelf Time and Min. Rem. Shelf time.
Issue-2: In sales order I want determine batch as FIFO Method, in present system it will consider LIFO method,
I come to know to over come this Issues i need to maintain some Characteristics and Class, Please help me out in creating of characteristics and class and other process,
Thanking you in advance,
Sudheer.UDear Team,
Recently We Configured Batch Management in SD, and Batch is determining in Sales order, delivery and Billing. Its working fine.
Issue-1: While posting stock (Quality server) with moment type 561, production date entered manually but system not calculating Expiry date automatically, i maintained Total shelf Time and Min. Rem. Shelf time.
Issue-2: In sales order I want determine batch as FIFO Method, in present system it will consider LIFO method,
I come to know to over come this Issues i need to maintain some Characteristics and Class, Please help me out in creating of characteristics and class and other process,
Thanking you in advance,
Sudheer.U -
Class and characteristics for material
Hi Gurus,
In which table i can see Assignment of Classes to Materials?
Thank you
ANil
Edited by: anil maguluri on Jul 31, 2008 4:46 PMHi,
Table AUSP will have the values for material. Enter material number for field OBJEK and display the data.
Other Fields:
Class Type - KLART
Characteristic Value - ATWRT
Regards,
Srilatha. -
Linking Equipments to all the classes and characteristics
Hello Everyone,
I need a list of all the equipments for a specific technical object type in a given plant with their classes ,characteristics and values.
I tried to do it with standard list editing IH08, but it restricts me to max of 20 characteristics.
Can some one help me with an alternative or a query to pull up all the classification info ( classes, characteristics, and characteristic values)
Thanks in advance
SumitHi,
The work around I am using to overcome this problem is Unzipping th ear/war file created by servicegen task and including all the classes. Then creating the ear file again by creating a new ant target.
I know this is not a neater way, but this works for me. -
Logistics class and characteristics
Hi there
my question about adding lojistics characteristics to (material, equipment, vendor etc) master data.
What should i do step by step to see these values in my reports?
thanks..
JMCQlook for the business content datasources.
activate them in source system
replicate in BW
then link it to your IO and load them...
This is just a high level view...
if you dont find any delivered one for your requirement then go with a custom...
search forum for how to load master data, direct update...... -
Transport of Class (CL02) and Characteristics (CT04)
Hi Gurus,
Can both class and characteristics be transported using ALE. Example
from DEV to QAS?
I understand in CT04, it is not possible. Everything need to be done
manually to the specific system/client.
Thanks in advance,
AzirHello,
Classification data cannot be 'transported', it has to be sent by ALE.
Please see notes 86900 , 45951 and note 10745 for more information on this.
Thanks. -
Standard SAP Reporting Using Classes and Characterstics
Hi Experts,
I am currently interested in if there are any options to using classes and characteristics within standard reporting in SAP ECC. I know some reports have the selection critiera and allow for other fields to be added to reports. Does anyone know the reports that use classes and characteristics or have the ability to use them. Any help is appreciated.
Regards,Consultant 01,
I am not sure of the specifics of your question. The reporting approach depends on the objective of the reports and the business requirements. In general, transaction MC03 can be use to report via classification characteristics. This key figure reporting option covers many classifying attributes.
If you want to report using batch classification and characteristic values, BMBC offers options for reporting on batches. In this case you may use the classification tab of BMBC to enter the batch class for "search with batch class" and/or "search with selection class". The latter allows you to view and/or narrow your search by characteristic values.
I hope that this helps.
Regards,
Wayne -
Assign Class and Characteristic to equipments
All
I have uploaded class and characteristics with values in to the system. Now I have to assign several Equipments to Class and Characteristics with values.
How can I achieve this other than recording method.
Is there any standard Direct input method or any BAPI to do the same
Please assist me in uploading the same.
MuradHi,
You can use IBIP transaction on SAP to assign classes and classification values on equipments or Functional Locations on SAP.
Transaction IBIP use standard SAP BAPIS to upload information
Please review the link below to have additional information
http://help.sap.com/saphelp_45b/helpdata/en/35/a47db0763e0392e10000009b38f9b7/content.htm
Best Regards
Carlos -
Equipment class and charecterstics
Hi SAP specialists,
We are in the process of creating class and characteristics for equipments in my company. Please advise if there is a table of possible classes and characteristics that can be referred to while creating class and charecteristics.
I understand many companies refer to a catalog of class-characteristic to select the combination that is applicable to them.
Your valuable inputs are greatly appreciated.
Regards,Dear Sridhara
Actually the classes are mainatined according to class type & not according to equipment category (equipment type). So i think it is not possible to maintain it according to equipment category & there is no such table wich will maintain the classes according to equipment type.
Yes you can create the Z table & update it while creating the classes under equipment class type & maintain it according to equipment category (Equipment type). But it is Z Development & not standard one.
I hope this will answer your query.
Regards
Makarand Gurjar -
Add a class and a configuration profile to a material.
Hi all,
I'm creating materials using BAPI_MATERIAL_SAVEDATA.
1. Now I need to add a class and characteristics to the material.
I think I am suppose to use BAPI_CLASS_CREATE and BAPI_CHARACT_CREATE. I'm not real sure about these but if so can someone help me with them.
2. I have to add a configuration profile to the material.
I have no idea of the FM to be used here. I need a help.
Also if someone could just explain how class and characteristics work together would help also.
Thanks,
Message was edited by:
Akeem LockettThanks,
So is this just attaching the class and characteristics to the material??? I still need to use BAPI_CLASS_CREATE and BAPI CHARACT_CREATE right?
3. Is there a BAPI that I can use to create a BOM? The issue I am having here is that I extended the STKO table using the include CI_STKO. I need to populate these custom fields when calling the BAPI. I can't find where I would pass the custom fields.
Thanks,
Message was edited by:
Akeem Lockett -
Material Class 001 - Characteristics not comming at the time of GR
Hello,
I am trying to use material class 001 in material.
I have created Characteristics and assigned to Class (001) and have attached this class to Material.
But when I do Goods Receipt of PO, I do not see any tab with classifications.
I have also tried activating batch (as some say that I have to activate batch to get the characteristics at the time of GR) but this does not help.
Please let me know, how can I get the characteristics to get populated at the time of GR.
Regards
Prabhjot Singh
Edited by: Prabhjot Singh Nayyar on Sep 9, 2010 5:35 PMPrabjhot,
I have a group of materials "Bicycles". Within this group, there are 5 material numbers, BIKE1, BIKE2, BIKE3, BIKE4, BIKE5. Each one of these is sold as a separate item to the customers.
Now, my customer service group is having a hard time entering orders. They can never remember which one contains which combinations of colors and Derailleurs.
I create a class 001 BICYCLES and assign two characteristics, "COLOR" "DERAILLEUR". Possible color values are "RED", "BLUE", "SILVER". Possible DERAILLEUR values are "10SPEED" and "12SPEED". I then assign the materials to the class, and enter values for each of the 5 material numbers.
Now, when Customer service wants to find out which MATERIAL to enter into their sales orders, they can look up all the MATERIAL numbers that have specific MATERIAL based characteristics: Blue/10 speed; Red/12 speed, etc etc.
Later on, my Quality manager approaches me. For one material BIKE1, which is a Blue/10speed, I have 3 different factories where I build them. The resultant bikes are virtually identical from each factory. However, the manufacturing methods in each factory are different. My Quality manager wants to determine accurately the source of each manufactured bicycle, so that he can track warranty liability and issue recalls if necessary.
I create a BATCH class type 022 and assign 2 characteristics "MAN_PLANT" and "YEAR" I create several batches: "PARIS2010", "ROME2010", "LONDON2010": In the batches I assign the appropriate values: MAN_PLANT "PARIS", in another "ROME", and another "LONDON"; in all three I enter the value for year as "2010", I activate Batch management.
Now when I complete my Production orders, the three plants each receive their production into stock, but now they must enter a batch. The batches they enter upon receipt identify the manufacturing plant and year of manufacture. In my central warehouse, I now have BIKE1 stocked and sold under 3 batches: PARIS, ROME, LONDON. My quality manager is pleased.
I am rewarded with more work.
Best Regards,
DB49
Maybe you are looking for
-
I am new Mac user having just purchased a Mac Pro computer. I have been using a very reliable and healthy 9 year old HP Laser Jet 5000N with my old PC. Connection via IP and LAN router. No problems for many years. Not successful with connecting to ne
-
hello all, While taking Stores Inventory we have found the material with 0.003 stock and Value 90000000.00. We want to remove this stock from System and system not allow us to remove the stock
-
Hi, I have created a complex view A with user defined function as column. Then created another view B by selecting from the previous view. Now when I query the view B the perfornance well but when I use order by clause in the query then the performan
-
About PostWrongEntries under BAPI_PROCORDCONF_CREATE_TT
Dear PP guru, I have an enhancement program which used BAPI_PROCORDCONF_CREATE_TT. The program work correctly but sometime some goods movement not posted but store under T-code CO1P that user have to clear manually. Therefore I have look at BAPI it
-
I am trying to open menu bar for tools so I can get to compatible view and make all web addresses compatible. Cna not find in firefox