Regarding client copy and authorizations
hi,
i had installed SAP BW 3.5 on my system.it is a fresh installation.now the probelm is that iam unable to open the administration workbench screen which is the most important of all the BW screens available.when i type the relevant tcode , it is saying "screen cannot be opened on 000 client".so i created one more client 070 (by copying client). and when i log on using 070 client , it is saying you are not authorized to use that screen.
any suggestions?had i missed something in the installation?
regards,
ravi
Hi Ravi,
The procedure to delete is as below.
1. Log on to the client to be deleted.
2. Execute SCC5.
3. Check the delete entry from T000.
4. Schedule in the background.
Since you said you have deleted already , may be you have not checked the delete entry fron table T000.
In this case Go to table T000 and delete the entries.
After that create a client as below.
A local client copy copies between clients within the same R/3 System.
Both a local and remote client copy must be initiated from the target client using the following steps:
1. To create an entry for the target client in the client maintenance table, choose SCC4
2. Log on to the target client as SAP* with the initial password PASS.
3. Perform the client copy using SCCL.
4. Select the data to be copied using a profile.
5. Assign the source client for Customizing data, application data, and user master records.
6. Begin the client copy.
7. As copying is a lengthy process, use background processing.
8. To ensure data consistency, you may not logon to the target client during a client copy.
9. Lock the users in source client.
Regards,
Bapujee naidu
Similar Messages
-
Client Copy and System Restore query
Dear All,
I have few major doubt regarding client copy and system restor.
1. In my Quality system there are 2 clients: 100 and 200.In my PRD there is only 1 client 300(other than the standard default clients). My doubt is during remote client copy with SAP_ALL profile from PRD to QUA why the space increases only in MB.
I have been asked the same question by my management. They are saying PRD is 300GB and QUA is 220GB then why the space increases in MB though all data is copied in client 200(QUA) from client300(PRD)
2. If I delete client why the space is released in MB. Because according to them it should be in GBs.
3. Now my third query is I have to restore PRD backup in QUA.So I said that this requires same <SID> and Same sapce in the sapdatafiles(OS is HP-UX 11.31 and DB is Oracle 10g).So I have to explain them why these two things are contradary to each other. In case of client copy space required is only in MB and in case of System restore of PRD in QUA sapce require is in GBs.
Your suggestions will be highly obliged.
Regards,
PG1. In my Quality system there are 2 clients: 100 and 200.In my PRD there is only 1 client 300(other than the standard default clients). My doubt is during remote client copy with SAP_ALL profile from PRD to QUA why the space increases only in MB.
Response > Because during client copy your customizing and other objects are copied.
The database structures,tables etc are already present.
2. If I delete client why the space is released in MB. Because according to them it should be in GBs.
Response > Since client deletion is not same as deleting database /customizing tables .If you delete complete dataspaces/tables then there will be sizeable difference.Similar logic as Response 1
3. Now my third query is I have to restore PRD backup in QUA.So I said that this requires same <SID> and Same sapce in the sapdatafiles(OS is HP-UX 11.31 and DB is Oracle 10g).So I have to explain them why these two things are contradary to each other. In case of client copy space required is only in MB and in case of System restore of PRD in QUA sapce require is in GBs.
Response > Since in a system copy you will copy data files (which includes tables,and all otehr strucutres ) hence the size required will be similar to PRD. -
Differences between Remote Client copy and Client export and Import
Dear All, I am new to SAP. Please let me know the Differences between Remote Client copy and Client export and Import. Any response is greatly appreciated. Thanks a Million
Hello Mallikarjuna,
Follow the below note,
https://service.sap.com/sap/support/notes/552711
which describes the answer to question - Which is better or faster, a client transport or a remote copy?
Basically client transport would be preferred if the network connection between the source and target system is slow.
For more help,
http://help.sap.com/saphelp_nw70/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm
Regards,
Debasis. -
What is the defferent between client copy and client transport
what is the defferent between client copy and client transport?
give me the steps that how to make a applications data copy from production to QAS.
thanks
priyanHi,
what is the defferent between client copy and client transport?You better google it..!
here is the result..
http://help.sap.com/printdocu/core/print46c/en/data/pdf/bcctscco/bcctscco.pdf
Follow the standard procedure of System Copy from PRD => QAS :
Download guide as per your release:
http://service.sap.com/systemcopy
What is Systemcopy:
http://help.sap.com/saphelp_rc10/helpdata/en/a2/2f0c173a5e43d19585724239ff4de7/frameset.htm
Regards; -
Client Copy and Partner Profiles
Hi,
I have a doubt related to client copy and how it will affect the partner profiles.
We have a client which has quite a lot of partner profiles defined in it. Now the problem is that the Basis team is planning to perform periodic client copies on this System which will copy the data from another client say 010 to the client in discussion. My doubt is, when this happens what will happen to the partner profiles that are already there in the target? Will it be lost resulting in we creating it all over again? if so is there anyway to get around this issue?
I would appreciate any kind of input on this issue.
Thanks
Praveenas far as i know a client copy is based on some parameter say it can be client copy based on master data, client copy based on application data etc. I guess partner profile is an application data so in tht case if client copy is done in its context no data will be lost.
just my thought, but please confirm on this with a BASIS team or try a post in the forum for Adminstration and BASIS. -
Hi Experts,
I have a scenario where in my Source Systems runs on HP-UX,Oracle10G and ECC 6.0 and my Target Systems runs on Windows 2003,Oracle 10G and ECC 6.0 except OS all the SAP and DB versions and Patches are same.
Could you please tell me can i able to do remote client copy( i am sure with client export/import we can do)? does any body done the same before.
Please suggest me on this
Thanks,
LaxmanAs far as i remember Remote Client Copies between different OS is possible... essentially a client copy is a HUGE transport and as far as the SAP versions are the same it should be ok. (please correct me if I'm wrong)
Read
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
and
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c684ba111d189750000e8322d00/frameset.htm
Regards
Juan -
After client copy and import export, WebUI not functioning
Hi Experts,
We have copied the client MKH300 into the client MKH305. The client
copy was performed using SAP_ALL authorization.
After the client copy a client compare was performed and several
differences were discovered. BDLS was run and a custom program was run
to copy custom tables from MKH300 to MKH305. This program has been run
in several other client copy cases and there is no issue with it.
When logging into the WebUI in client MKH305 an error message is
displayed in the application log:
"An exception has occurred during program processing"
(Please see attached screen shot)
When looking into the details the following text is shown:
Diagnosis
An exception occurred during request processing. This was handled
centrally. It changed the program flow and the result of the request
probably contains errors.
Procedure
Contact your system administrator.
Procedure for System Administration
Activate checkpoint group BSP_WD_EXCEPTION_DISPLAY. To do this, use
transaction SAAB. If the error recurs, further details are displayed.
When the check point group was activated there was no more information.
The links in the Homepage are not correct even though the business
roles, config keys etc look the same between the clients.
Much customization seems lost for the WebUI although when comparing the
two clients' customization for the WebUI they seem identical.
The client MKH300 works fine so the intention was that MKH305 should be
an exact copy of that client, but that did not happen.
Could you please help me out.
Thanks!
Nagarajuthey are included in the xe server install ...you could try copying the executables but maybe that wont work if all the libraries arent present
failing that install the regular oracle client -
Client Copy and Configuration of Integration Server
Hi All,
We have PI 7.0 DEv(ABAP and JAVA) system installed on AIX 5.3 and configured client 150 as Integration Server.
Further we have an requirement for two more clients to be created by client copy
For example : Say 160 as Unit test and 170 for X.
1) Now my question is do we have to do a client copy with 150 as source or 000.
2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
Cheers
Deepuhi,
>2) Once the client copy is done do we have to Configure these clients 160/170 as Interation Server (Is it Possible to configure multiple client as Integration server in one system) or as Application system.
no it is not possible to have more then one integration server (XI)
on one server
you need a new server if you want test environment etc.
Regards,
Michal Krawczyk
http://mypigenie.com XI/PI FAQ -
Local Client Copy and Remote Client Copy in MS - SQL Database
Dear Gurus,
If i need to do the local client copy or remote client what is the procedure i should consider because i'm using MS-SQL 2005 database.Most of the thread using Oracle database.Can u give me the step by step or manual how to make it.
Thanks an advance.
/ShahHi.
SAP Help is a very good source for info -> [Link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm].
I suggest that you read the manual carefully. There are many tipps to improve performance (parallel processes) and tipps and tricks to avoid problems. If you need some notes, they are adviced there.
Also the notes [116787|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=116787], [552711|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=552711], [67205|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=67205] or [489690|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=489690] are interesting.
regards,
Martin -
Local client copy and Internet
Hi guys,
When i try to do a client copy for my new created client..i get an error SAP* does not exist.
SCCL->SAP_CUST-> client000->sechdule background -> client copy vertification->background Print parameter option comes .. i dnt have any printer connected but if i select a default LP01 its gives an error SAP* does not exist.
Second issue is after installing SAP ecc6 i m not able to connect to internet from the OS( 2003 server) i removed the enhaced security feature but of no use.. i tried changin setting in Internet option but could not connect.
regards
AbhishekHi.
SAP Help is a very good source for info -> [Link|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm].
I suggest that you read the manual carefully. There are many tipps to improve performance (parallel processes) and tipps and tricks to avoid problems. If you need some notes, they are adviced there.
Also the notes [116787|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=116787], [552711|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=552711], [67205|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=67205] or [489690|https://websmp230.sap-ag.de/sap%28bD1kZSZjPTAwMQ==%29/bc/bsp/spn/sapnotes/index2.htm?numm=489690] are interesting.
regards,
Martin -
Hello Everyone,
I have a question about client copies with jobs.
the functional user have asked us to make client copy for 2 weeks every day.
Situation:
Copy must go from Client A to Client B. (with SAP_ALL)
Client A has jobs that also have to be on Client B.
But with Client copy the jobs wont be copied to client B.
So i have to make the jobs every they again on Client B after the copy.
My question is: Is there a way to copy jobs to client B, so that I dont have to make the jobs again every morning.
Thanks in advance.
RohitRohit,
Discussed lot of time, option is to create ABAP program to export/import job definitions.
Copy Background jobs to another systems.
Regards, -
Client copy and delta initialization
Hello all,
We want to copy the source system, i.e. make a client copy.
Could you all please advise me what will happen with delta? Should I initialize again after the copy?
Please guide me.Hi,
Before you do a copy, make sure that your deltas have been fetched from the DeltaQueue into BW and that no delta is pending. After the client copy, an inconsistency might occur between BW delta tables and the OLTP delta tables as described in Note 405943.
After the client copy, Table ROOSPRMSC may be empty in the OLTP since this table is client-independent.
After the system copy, the table will contain the entries with the old logical system name that are no longer useful for further delta loading from the new logical system. The delta must be initialized in any case since delta depends on both the BW system and the source system. Even if no dump 'MESSAGE_TYPE_X' occurs in BW when editing or creating an InfoPackage, you should expect that the delta have to be initialized after the copy. -
I'm planning on doing a refresh of our QAS client, using PRD client (remote copy at this point).
I would like to know if the jobs that are setup in the QAS client will be removed/replaced by the client copy from PRD? And will those jobs that are in the PRD client, be copied to the QAS client.
Thanks
Laurie McGinleyAnd will those jobs that are in the PRD client, be copied to the QAS client.
No they will not be copied. I just did Remote copy last week creating a new client and the jobs in PRD were not copied to that client.
I would like to know if the jobs that are setup in the QAS client will be removed/replaced by the client copy from PRD
So I guess its safe to assume that the current job definition would not be overwritten. The only thing that I can think of might be affected are your job variants which might not work based on the config. copy.
Hope this helps.
Thanks,
Naveed -
Client creation and authorization
How to create our own client in sap like client 800 & 810 ....
and how get authorization for created client
regards,
surya.hi,
goto sale -> declare a client and assign client no
u can login in that client.
or while loggin in use user id - DDIC
password - 19920706
and click on change password to create a new client
if helpful reward some points.
with regards,
Suresh Aluri. -
Local client copy with warnings and errors
Hi ,
I am doing a local client copy and is still running . There are a few large tables which have not been copied successfully and is shown under "Warnings and Error". The tables show "Program Cancel (See SM21)". In SM21 , I find the workprocess was disconnected from the database.
Now my questions is , once all the remaining tables complete , will I be given an option to repeat the copy for the failed tables only. The system is 6 TB and it is running for more than 15 days now.
Please suggest.
Regards
Ratnajitwill I be given an option to repeat the copy for the failed tables only
No, it doesn't ask you to repeat copy only for failed tables.
The system is 6 TB and it is running for more than 15 days now
What is the requirement to do such BIG client copy?
Regards,
Nick Loy
Maybe you are looking for
-
I am suddenly unable to connect to the my ITUNES STORE and have checked thorugh all my settings but nothing stands out. I am able to enter my ITunes App but cannot purchase anything. Whenever I try, it will always say "Can not connect to ITUNES STORE
-
Not able to connect with pws prime cable provisioning
Hi I have installed cisco prime cable provisioning in my Linux system. pws is also insatlled. I tried to connect the pws through program. but we are gerring Unable to connect to the remote server. I generated the code from the wsdl file and used that
-
This is adobe sales "encore cc is here" WRONG
Please Read this Rubbish 10am March 10 2014 here in the UK, Pure Madness, Scott: OK I know if I purchase the full creative cloud I can access encore cs6 but what if I just go for the single app subscription Scott: thanks Sanoop: You are welcome Sanoo
-
Revision: 12673 Revision: 12673 Author: [email protected] Date: 2009-12-08 14:41:28 -0800 (Tue, 08 Dec 2009) Log Message: Integrating latest FXGUtils now that TLF 566 is in trunk (which includes a fix for TLF 2497992). Changelist: 646928 Imple
-
All my purchases aren't working correctly
I just spent the last hour and a half reading all the problems people are having with the latest iTunes update. I hope all your problems are solved. However, no one seems to be having the problem I am. I upgraded to 8.1.1 two days ago and now all of