Regarding client moving

Hi Gurus,
I have a question..
I have ECC5.0,oracle 9i and HP-UX system..
I want only one client (masterdata,transactional data)to be moved to system which is on windows,oracle 9i and ECC5.0
Please suggest us how to proceed with this...
Thanks in advance..
Regards
Dinesh.

Hi.
There are two possibilities:
1. you can do an remote client copy; It's ok if the spource client is not too big -> network traffic, runtime;
2. you can do a client export in the source system and an import on the destination.
Take care that DDIC mus be identically (you can tell the system that you willnot copy some tables with report RSCCEXPT). Additionally have a look at service.sap.com with the keywordes mentioned above.
best regards,
Martin

Similar Messages

Packet drop when clients moving from one Access point to another

HI All ,
I am new to wireless . I am using WS-SVC-WISM-1-K9 wism module and using 5 Access points . When my clients are moving from one access point to another we are getting packet drops .
Kindly anyone suggest me what all configuration i need to verify on the controller for Proper client roaming so that i can resolve my issues..
Please let me know in case of any explanations requiered .
Thanks in Advance !!!
Regards
Angus

For radius authenticated SSIDs, you need WPA2-aes or wpa1-tkip-CCKM. It depends on what the client supports.
For pre-shared key, any WPA should be decent enough for roaming speed.
If you're on WEP ... no comment.
If you covered the above point, check if it's not a coverage problem. If the 2 APs coverage zone are not overlapping there will be a hole where you don't have signal and logically will have packet drops.

Not yet solve....TAX Report regarding (client)question

Client asked to me in interview, please give me answer
This is regarding US PAYROLL
1 Transaction PU19 Reports for tax reporting/Tax Returns / Files for State Unemployment Reporting on CD or Diskette :-
We have issues on some reports regarding address, page numbers and totals. Alex worked on it and told that we need to contact SAP         for help as he thinks problem is with SAP Forms itself. Currently typing manual returns pending changes to forms.
2 Deposits on 941 form:-
   Can we update the form to include tax deposits made on the 941 line for deposits?
3 State Tax Returns not configured in SAP:-
   Can we have state tax returns configured in the PDF format also?
4 Printing of W-2:-
Need to be able to print W-2s so we can fold/seal so address apprears on outside for mailing. Duplex or 11/14 form? Our folder/sealer uses pressure seal self sealing forms.
5 Documentation of Processes (Benefit and Garnishment):-
6 Configure benefit changes for 2009:-
7 Update benefit tables / rates for 2009:-
8 'Update SUT rates for new year:-
9 New 401k Limits Entered :-
Documentation how to do this
10 W-2 Reporting, Non Taxable Relocation, Personal Use of Company car (Box 12 and 14 items) for W-2 Reporting:-
11 Deceased Employee Payments:-
How do we handle so W-2 is correct and any 1099 items handled correctly
12 'Mag Media File - Federal (annual):-
'RS record missing from Magnetic Media file. Can this be included in the Federal Mag Media file? Kathy has sent some changes that need to be made to Frank.
13 'State Mag Media Files and State annual returns:-
Have some states that we must file by diskette file. Can we also have annual state tax returns configured in the PDF format?
14 Federal 940 Return:-
Make sure this form is configured correctly
15 Pension Plan Indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
16 Third Party Sick Pay indicator box on W-2:-
Tested and is not showing on the W-2 or in the Mag Media file
17 Retirement Calculation:-
18 Year end close procedure:-
What all has to be done before we can close the year and print W-2's. Do we have to do any zeroing of wages, taxes and deductions before the first check of the new year can happen?
19 Sort order for W-2 printing:-
20 941 Correction Form (941C):-
Need training on how this is handled
21 'W-2 correction form (W-2C):-
Need training on how this is handled
22 'Payments received in January that affect prior year W-2:-
'How do we handle. We receive info in January that must be included on the prior year W-2. Want to be able to include on original W-2 without filing a W-2C. (Third Party Sick Pay, Payments made in Mexico, Germany, etc) Usually don't receive.
Regards

Aswin,
The client session is your primary TopLink interface abstracting over the shared cache and connection pooling. Depending if you are using internal or external connection pooling and the transaction state you are in TopLink may have a JDBC connection allocated to your client session. A client session does equate to a single dedicated JDBC connection for its entire lifecycle.
Assuming you are using an external connection pool (Application server's data source) your client session will have a connection from this data source when required to perform a read and during the commit of its UnitOfWork.
Doug

Need toughts on approach. Client moving to Maconomy/Business Objects

Post Author: klokhammer
CA Forum: General Feedback
Hi.On of our important clients are most likely to migrate between economy systems within the next 9 months. Case as follows:
We have developed a budgeting/forecast and reporting system for a certain market/company. The solution is based on a Microsoft SQL 2000 database/server with Microsoft Access as application interface. The solution is integrated and gets actual figures from the economy system Aspect on a IBM iSeries (AS400) system. The "edge" of the system lies in sophisticated budgeting/forecast routines, the report module is rather poor....
The client is now most likely to migrate to Maconomy as the new economy system, and Maconomy AnalytiX as the new BI system (which I understand uses Business Objects.)
We are new to Business Objects and need general recommendations on what level we should try to integrate on. Should we "ditch" all the development done in Access and build a new solutions through Business Objects, keeping all the business logics, but not the interface?
Should we try to integrate on a database level, keeping the interface in Access (for budgeting/forecast), and exporting data into Business Objects to allow reporting through Maconomy AnalytiX?
As you most likely have understood, my knowledge about Business Objects are pretty poor. But please try to give me your thoughts on how we should move along, and what kind of "standard" considerations we must have in mind.
Kind regardsklokhammer

Post Author: jsanzone
CA Forum: General Feedback
klokhammer,
I checked out Macanomy's web site and searched for references to Business Objects, and sure enough it is mentioned here and there. What it sounds like is that Macanomy has developed some "Macanomy Standard Reports" using BusObjects, so if you want these nifty Macanomy reports available to you, you buy the Macanomy product, which is bundled w/ BusObjects, and voila you have the reports. It sounds like a winning strategy. On the other hand, in order to get this type of capability, an organization would have to hire a staff to purchase and install Business Objects, then the staff would have to understand the financial database that the client has established and populated, and then the staff would have to set about building the reports that are needed. With Macanomy, it seems that you get the whole kit and kaboodle in one swoop, which is good for an organization providing that it is on the same wave-length as Macanomy. In regards to your question about what to do with your existing infrastructure, this is a call only you and your client can make. In IT, it's always about the data and how it is used. Peeling back the onion a bit, the process works like this: in order for the Macanomy reports to work, the report must be properly built and it must read from a "universe", which is a BusObjects term for defining the interface between the user and the database (the meta data process). In order for the universe to exist, it must be built by a "Universe Designer". The Universe Designer must have an intracate knowledge of how every table in the database will be used to support the reports that the end-user wants to have (either pre-canned (standard) or ad hoc capability). The database is still a critical piece, and reviewing the Macanomy offering I have a funny feeling that they come in with their own database structure and universe, which makes their process a much quicker install. The downside, as it appears to me, is how you would migrate your existing data into the Macanomy structure (this goes back to the two parties being on the same wavelength). I think in your case it's going to be a matter of ditching your database structure in MS SQL 2000 and Access, and adopting the Macanomy structure, but this may be more painful to do than any one at this point realizes. It sounds like you need to continue arming yourself with knowledge before making any final decisions. Good luck, and perhaps keep all of us posted on your experiences.

Queary regarding Client Copy

Hi Experts,
I have a scenario where in my Source Systems runs on HP-UX,Oracle10G and ECC 6.0 and my Target Systems runs on Windows 2003,Oracle 10G and ECC 6.0 except OS all the SAP and DB versions and Patches are same.
Could you please tell me can i able to do remote client copy( i am sure with client export/import we can do)? does any body done the same before.
Please suggest me on this
Thanks,
Laxman

As far as i remember Remote Client Copies between different OS is possible... essentially a client copy is a HUGE transport and as far as the SAP versions are the same it should be ok. (please correct me if I'm wrong)
Read
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c4e4ba111d189750000e8322d00/frameset.htm
and
http://help.sap.com/saphelp_nw04s/helpdata/en/69/c24c684ba111d189750000e8322d00/frameset.htm
Regards
Juan

Issues regarding client

hi folks,
a per my understanding the webservice can be invoked by using a
static client
dynamic client
without using wsdl
using wl6.1
can anyone put light on the differences betn.these and the performance
issues related to each.
thanx in advance
deepuu

thanx micheal for ur replies
deepuu
"Michael Wooten" <[email protected]> wrote in message
news:[email protected]...
>
Hi Deepak,
Retrieving the WSDL is generally seen as a "necessary evil" (it actuallyinvolves
establishing a network connection with a HTTP server) that one is willingto take
for truly dynamic Web Service composition :-)
But honestly, "we ain't there yet"! (LOL) Most of the time, you will findthat the
"service interface" for a Web Service does not change that often, so thereis really
little value in retrieving the WSDL with every invocation. What we reallyneed is
standard mechanism for notifying "interested parties" when a "serviceinterface"
changes, right? That, or a dedicated SOAP Fault code indicating thiscondition. Anyway,
in the "real world" you would want to:
1. Keep a local copy of all the WSDL(s) for the Web Services you consume,or
>
2. Use your Web Services toolkit to create SOAP messages without WSDL.This usually
involves a little more code, but once you do this a couple times you'llsee that
you only need a couple of pieces of information from the WSDL to do it!I've posted
several "heavily commented" client examples showing how to do this in WLS6.1. I'll
do it one more time just for you :-)
Regards,
Mike Wooten
"deepuu" <[email protected]> wrote:
hi michael,
thanx.i think ur answer has resolved my doubts.but one more thing thats
not
clear is that when to invoke ,with and without wsdl and what r the diffn.
in
each case.
deepuu
"Michael Wooten" <[email protected]> wrote in message
news:[email protected]...
Hi Deepak,
Actually, you can have both static and dynamic Java clients that don'tuse
WSDL :-)
A "static" Java client uses the dynamic proxy mechanism, which wasintroduces in
version 1.3.0 of the J2ME spec. If you aren't familiar with how thisworks, check
out this link:
http://developer.java.sun.com/developer/technicalArticles/DataTypes/proxy/
>>>
>>>
Anyway, based on an "unofficial" performance test I conducted when WLS6.1
first
came out, a "static" Java client is around 460% faster than a "dynamic"Java client.
I tested using the message example that ships with WLS 6.1, and theaverage service
invocation time with the "static" Java client was 20 milliseconds. Itwas
280 milliseconds
with the "dynamic" Java client :-) Which one should you use? Both havebenefits,
so it's sort of hard to really choose :-) If you want "raw speed", I
guess
you would
go with the "static". If you don't want to (or can't) have"service-specific" classes
in your Java client, then you'll want to go the "dynamic" route. Theinterface used
to create the J2ME dynamic proxy is in the client.jar, so you don't
have
to put extraneous
classes on the client machine.
Hope this information was helpful,
Mike Wooten
"deepuu" <[email protected]> wrote:
hi folks,
a per my understanding the webservice can be invoked by using a
static client
dynamic client
without using wsdl
using wl6.1
can anyone put light on the differences betn.these and the performance
issues related to each.
thanx in advance
deepuu

Question Regarding Client Proxy configuration.

Hi All,
I am configuring Client Proxy for my scenarios in which I have to fetch data from ECC server for my XI server. I am following the steps as provided in the following blog:
How do you activate ABAP Proxies?
Now when I have created the RFCs i.e LCRSAPRFC and SAPSLDAPI in ECC System I have a doubt that where should I maintain the program ID of these RFCs i.e whether in J2ee engine of XI or ECC??
Also if possible plz send me the other visual admin configurations for these RFC and exactly where these settings should be done and what values to be provided.
Regards,
Rookie.

Hi,
For more clarification:
http://help.sap.com/saphelp_nw70/helpdata/EN/23/fa1f1e5f6841cf92c64dc19d79f290/frameset.htm
Boopathi
Edited by: Boopathi Thangavel on Jul 15, 2008 7:43 AM

Regarding client data

hello everyone,
plz. tell me how we can copy the data from one client to other.

Hi,
If you are looking at moving configuration (SPRO) entries from one client to another, you can save the configuration table entries under a transport request and then import the transport entries into the target client by running the transaction SCC1 in the target client.
For copying transactional data, you can contact the BASIS team.
Cheers,
Aditya

Regarding client copy and authorizations

hi,
i had installed SAP BW 3.5 on my system.it is a fresh installation.now the probelm is that iam unable to open the administration workbench screen which is the most important of all the BW screens available.when i type the relevant tcode , it is saying "screen cannot be opened on 000 client".so i created one more client 070 (by copying client). and when i log on using 070 client , it is saying you are not authorized to use that screen.
any suggestions?had i missed something in the installation?
regards,
ravi

Hi Ravi,
The procedure to delete is as below.
1.     Log on to the client to be deleted.
2.     Execute SCC5.
3.     Check the delete entry from T000.
4.     Schedule in the background.
Since you said you have deleted already , may be you have not checked the delete entry fron table T000.
In this case Go to table T000 and delete the entries.
After that create a client as below.
A local client copy copies between clients within the same R/3 System.
Both a local and remote client copy must be initiated from the target client using the following steps:
1.     To create an entry for the target client in the client maintenance table, choose SCC4
2.     Log on to the target client as SAP* with the initial password PASS.
3.     Perform the client copy using SCCL.
4.     Select the data to be copied using a profile.
5.     Assign the source client for Customizing data, application data, and user master records.
6.     Begin the client copy.
7.     As copying is a lengthy process, use background processing.
8.     To ensure data consistency, you may not logon to the target client during a client copy.
9.     Lock the users in source client.
Regards,
Bapujee naidu

Help regarding Client agent

hi all,
I have a scenario where in I need to call two secured web services using my BPEL process. I want to associate my client agent to securely invoke the two services. How do I change the setting in the wsif-wsm-config.xml (for two services) so that they can be securely invoked. Is that possible two associate two secured webservices in wsif-wsm-config.xml??
Can any one tell me with these what do I do regarding this??
thanks in advance,
Manoj Nair

Thanks Chintan,
I have resolved it.. I hope you will not mind if I pose many questions to you that keep on tickling me and I hope you will be in a better position to reply for these and I have seen your blogs too..
Kindly help me out with these....
The question is....
I want to construct a Client Agent and Server Agent architecture.
I will tell you the scenario...
I have my client agent in my system1 and I do have a server agent in my system 2 (both systems have there own SOA suite installed running on them)
In my System2 I have created two webservices(BPELProcesses) and I have associated a Server agent to both of them. The thing is like I don't want to register my services to my gateway. So it is evident that I will not be getting the SID that owsm provides. So here lies the question;
The question is ;
I want to create two separate policies for my two different services say "Policy for BPEL1" and "Policy for BPEL2"
so that I can enforce different policies for different services according to my requirement.
Had I registered my services to the gateway, I would have got the unique SIDs and I would have created policies in the Server Agent and I would have mapped those policies to SID1 and SID2 respectively. But as I told you I don't want to configure my web services to the gateway.
So could you please tell me how do I create two separate policies for my two web services apart from the default policiy that Server agent has???
The next question is....
In my System1,,,, Another process say BPEL3 invokes these two services in system2 . So it is for sure that the client agent will intercept in between when my BPEL3 sends in a request for BPEL1 and BPEL2..
The question araises here....
How do I create two separate policies in my Client Agent as well apart from that default policy that Client agent provides??
It will be really be helpful to me if you could help me out in coming up with this...
I hope you would kindly revert to me with the needful...
Thanks & regards,
Manoj Nair

Regarding Client change for transport request

In 46C system, How to change client for transport request?
Before Upgrade, we have Trans Request-DEVK900002 for client XXX, and this client does not exists anymore. now How to delete this trans request or release it.
one of the way i think is to change client for transport request and release it. Please share your suggestions.
regards
Jaichan

Hi shlesa,
Thanks for your reply.
I tried now..it does not worked out.
i created request at 000 using DDIC and then logged with 001 client using DDIC.
then i executed SCC1, gave Source Client 000 and Request number and executed.
i checked in SE09, was still the Request appeared with 000 client.
Any other alternatives.
Jaichan

Question about a client moving around and don't get connect behind the secound IPhone

hi all
i have a ISE setup, and a lot of 3560 (12.2.5 SE8) and 2960S switches
but my challenge is that some of the client are moving from one seat to another seat, and connect there pc to the local docking station (behind another IPhone)
it seams to me, that the phone isn't release the "unit" behind, anyone have a idé
my port cfg is
the PC will not' work and the second spot, but when the move back to the first place ,, they get connection again
i have now authentication timer reauthenticate 60 , but it generate a lot of trafic (3000 Phone and 2800 pc's)
description *** Host ***
switchport access vlan 10
switchport mode access
switchport voice vlan 15
ip access-group ACL-ALLOW in
no logging event link-status
srr-queue bandwidth share 1 70 25 5
srr-queue bandwidth shape 3 0 0 0
priority-queue out
authentication event fail action next-method
authentication event server dead action reinitialize vlan 20
authentication event server dead action authorize voice
authentication event no-response action authorize vlan 20
authentication host-mode multi-auth
authentication open
authentication order mab dot1x
authentication priority dot1x mab
authentication port-control auto
authentication periodic
authentication timer restart 30
authentication timer reauthenticate 60
authentication violation restrict
mab
mls qos trust cos
auto qos trust
dot1x pae authenticator
dot1x timeout server-timeout 5
spanning-tree portfast
service-policy input SP-UNTRUSTED

Having participated in these boards for quite some time, I have to say that the iPhone 5 and it's newer cousins offer a Great product, from a creative and practical point of view. My iPhone 5, including the various releases of iOS software has exhibited high quality and reliability. Have I ever had a problem, issue or frustrating operational question ...Yes. Have these problems, issues and questions been mitigated ...Yes. I would say your list needs to add a little more emphases to the opportunity to exchange a non-working device rather than just return it. People would otherwise be missing out on a very satisfying ownership experience.

Regarding client,company code,purchase organisation.

hi
i want to know how to create a client,company code,purchase organisation.

Hi,
Client : -
1. Create the client in Tcode scc4.
2. Before that create a logical System in BD54.
3. Login in the newly created client with
user Name : sap* and password : pass
4. Use the Tcode sccl to copy the client.if you are not familiar with the client copy. Try a test run and then schedule it in background.
5. You can select the needed profile.
6. To view the log files use the tcode scc3.
Company Code: -
T-code: - SPRO
Path: - SPRO - Enterprise Structure u2013 Definition - Financial Accounting - Edit, Copy, Delete, Check Company Code.
Click on Edit, Copy, Delete, Check Company Code.
With reference of old company code create new company code.
Purchasing Org: -
T-code: - SPRO, OX08
Purchase Organization is basically used for report level.
If you want to create new purchasing organization
Enter t-code OX08, enter purchasing organization and itu2019s name.
Regards,
Mahesh Wagh

Regarding client

hi gurus,
i am undergoing traning training in an institute and we have two clients existing in the same system ........and my doubt is that does all programs,fms created in one client exist in another client...........plzzzz help me
thanks

Suneel,
Could you clarify your question further ? are you curious as to what type of SAP solutions would be used in a university environment ?
To talk about SRM (Supplier Relationship Management), this would enable the university to manage their suppliers efficiently. see below SAP's description of the SRM solution.
SAP Supplier Relationship Management:
Features & Functions
The SAP Supplier Relationship Management (SAP SRM) application is built on the technology platform of SAP NetWeaver, enabling multiple levels of suppliers, partners, and manufacturers to work together on core sourcing and procurement processes. SAP SRM provides a fully integrated source-to-pay process. Functionality includes:
Sourcing Expand the role of e-procurement to the next level of added value in the complete purchasing cycle by automating sourcing functions. SAP SRM can help you tap into new value through better business planning, more effective category management, improved supplier qualification, and more efficient supplier negotiation.
Procurement Execute the operational activities of procurement, including requisitioning, ordering, and receiving. With SAP SRM, you can integrate catalog-based requisitioning with your traditional procure-to-pay process and gain the benefits of e-procurement without losing your back-end enterprise resource planning processes.
Supplier enablement Link suppliers to your purchasing processes through the supplier portal. With SAP SRM, you can choose the optimal interaction channel for numerous business processes and documents and collaborate more effectively with suppliers in supplier-facing processes.
Master data management Manage catalog data as master data in a repository that is deeply integrated with the core application processes.
Hope this helps.
Regards,
G.

Issues with Clients moving from Autonomous to LWAPP

I have a fairly large wireless rollout of access points at my hospital's main campus and then I have 41 remote sites that have approximately 3 to 10 access points at each location.
My problem is this, I just converted one site from 9 autonomous access point over to LWAPP. The site has a 10 meg metro Ethernet connection so I know its not the link back to me. We have 26 Motion Tablets with Atheros wireless clients at that location that utilize a Citrix application called Logician. We have been having some issues with the Motion tablets holding the Citrix connection, but once we converted this site, those clients have really been having issues.
There is a high density of access points so coverage is not an issue, but I didn't know if anyone else out there may have a similar scenario and could lend some advise as to why the LWAPP causes so many issues.
Thanks in advance.

Hi. LWAPP itself should not cause service to be worse; because of the dynamic nature of its settings, it should actually improve connectivity.
Do these wireless clients have access to any services (e.g. internet) that do not require use of Citrix? If so, how is the performance there? If you're getting consistent, reasonably quick internet access, but your Citrix session keeps failing; it may not be a WLAN issue per se.
I have done several implementations of Citrix over WLAN for hospitals. Most of the time if there are connection interruptions, it boils down to one of two problems.
1.) Interference: Hospitals are very hostile environments for RF. Various building materials, large machinery, and irregular shapes in the floorplan make it difficult for RF to travel consistently.
2.) Citrix settings: Citrix is a highly configurable application. There are session timeout settings which can be tweaked which may make the system more tolerant to momentary lapses in connectivity.
My suggestion would be to see if the issue is limited to Citrix traffic only; and if it is, look at how Citrix is configured. If you're finding sub-par performance with all wireless traffic, then maybe it's an interference issue that keeps knocking you off the WLAN. If that is the case, I would suggest a professional wireless consultant should come in and decide on the best methods for giving you more consistent service.
Hope this helps! If so, please rate.

Regarding client moving

Similar Messages

Maybe you are looking for