Regarding comparison of f-01 and fbm1

Hi,
What is the difference between t-codes F-01 and FBM1 and both are used for sample document entry.
Thanks in advance.
Regards,
Hem

Hello,
Actually, you should get the same result.
The possible cause why you have different results can be that you didn't run the balance carry forward (f.16) for ledger ?? (currency type 40) for fiscal year 2009.
You can checl this in tables t881 and t882.|
You can run it even with year 2008 closed. There is no risk, no data is changed in 2008, only the balance carry forward is transfered to the new fiscal year 2009.
I hope it solves your issue
Best Regards,
Vanessa Barth.

Similar Messages

XL Reporter Report for comparison of last month and current month sales

Hi,
Our management requires an MIS report for comparison of sales in revenue and in terms of units for the last and the current month todate.
Is there a way to view this data for both the months together, without any user input?
Best Regards
Jyoti

Jyoti,
I'll try and explain the XLR Report you'd need for this. This is isn't the best way to explain something like this, but I'll give it a shot.
- Put an expansion on Row 8 and choose all Items (*), click Apply
- In A8, put ItemCode
- In B8, put Item Name
- In C8, put Sales - A/R Row Total
- In D8,put Sales - A/R Row Total again
- Setup a Parameter
    - Call it Period
    - Dimension
    - Financial Period
- In Column D, put a column Summary and click into Financial Period
    - click the button to open the selection window
    - click to the parameter tab
    - select your parameter and click OK and click Apply
- In Column C, put a column Summary and click into Financial Period
    - click the button to open the selection window
    - click to the parameter tab
    - in the bottom right corner, add a "-1"   it should look like this @Period-1
    - click OK and click Apply
- In C7 and D7 - choose Financial Period Code from formula builder
             (so you can see the period code at the column header)
This will show sales by item in the current Period (column D) and previous Period (column C)
Hope that helps and at least gets you going. I can't guarantee those are perfect instructions from memory.
Brad Windecker
[Omega Business Solutions|http://www.omegagroup.com]

Cost center wise comparison between FI view and CO view

Hi,
I have one doubt regarding comparison of cost center in FBL3N and in in S_ALR_87013611.
Is there any report in from which I can compare Cost center wise actual spending in FBL3N versus some reports in CO?
I would appreciate if someone help me on this.
Thanks in advance!
Bhargav
Edited by: BHARGAV RASBIHARI PADHYA on Nov 17, 2010 6:10 AM

Hi Bhargav,
If I am not wrong you are taking about the comparison of cost centres values in Co to Cost centre Values in FI.
If this is the case, then its a pain compiling the values. Because, when values flow from FI to CO then dont come to one cost centre, they are spread accross various cost centres where they are incurred.
For Example : You may debit P&S GL account for 10000, but the cost centres involve this expenditure this can be from different cost cetres like from Finance, Marketing, Retail etc.
Now if you want to compare the cost ccentre values with the FI and COthen you can imagine the work and time involved in it.
Let me know if anyone have any different views on this.
Regards,
Mallikarjun

Memory Management comparison between Database 9208 and 11gR2 on Sun Solaris

Hi All,
Need some case studies which would help understand how Memory management is done in 9208 and 11gR2 on Sun Solaris SPARC
Also wanted some real time data which says 11gR2 manages Memory and CPU better than 9208. Some comparison Graph between 9i and 11gR2.
Any information will be of great help.
Thanks everyone for your support.
Thanks
Abdul

please see if below helps :
http://www.oracle.com/global/de/upgradecommunity/artikel/upgrade11gr1_workshop2.pdf
http://www.dba-oracle.com/oracle11g/oracle_11g_memory_target_parameter.htm
Regards
Rajesh

Comparison between Oracle Contracts and Oracle Procurement Contracts?

Hi All,
I need some document which give the Comparison between Oracle Contracts and Oracle Procurement Contracts?
And which of them are suitable for what type of contracts?
Thanks
Syed

Hi,
Any kind of help plz.
Regards,
Subhra

Comparison Between Oracle eBS and JD Edwards

Hi All,
Is there any site / document / any kind of referference / help on comparison between Oracle-eBS and JD Edwards mainly for Finance and SCM module please ? Need this urgently so any help is appreciated.
Thanks & Regards,
Subhra Saha

Hi,
Any kind of help plz.
Regards,
Subhra

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and p

How to copy and paste the graphics from illustrator to MS word. What I tried is exporting in png with highest resolution and then inserting in to word. This loses a bit of resolution in comparison to direct copy and paste as EMF. But if I do a copy and paste, and then take a print of the document, all the graphs and text is printed upside down, flipped back.

Use the Pencil Tool
alex
adrian stock wrote:
> How to copy and paste a single pixel
>
> I want to copy a single pixel and then paste it in the
position of
> another pixel in the same image.
>
> (This is in effect changing the colour of the target
pixel, isn't it.
> But in my case copying an existing pixel seems simpler
than selecting a
> colour from the swatch or using the colour picker.)
>
> What is the most efficient way of doing this?
>
> I tried to select one pixel with the marquee tool. Then
copied it with
> control-C, but then how do I select the target pixel and
paste with
> control-V?
>
> Thanks for your help.
>
> Adrian
>

Please send me fm regarding to get purchase order and change purchase order

Hi,
Please send me fm regarding to get purchase order and change purchase order .
Regards,
Gurprit Bhatia

Hi,
Function module to get the purchase order details:
BAPI_PO_GETDETAIL.
data: po_items type table of bapiekpo with header line.
parameters: p_ebeln type ekko-ebeln.
call function 'BAPI_PO_GETDETAIL'
exporting
    purchaseorder                    = p_ebeln
ITEMS                            = 'X'
ACCOUNT_ASSIGNMENT               = ' '
SCHEDULES                        = ' '
HISTORY                          = ' '
ITEM_TEXTS                       = ' '
HEADER_TEXTS                     = ' '
SERVICES                         = ' '
CONFIRMATIONS                    = ' '
SERVICE_TEXTS                    = ' '
EXTENSIONS                       = ' '
IMPORTING
PO_HEADER                        =
PO_ADDRESS                       =
tables
PO_HEADER_TEXTS                  =
   po_items                         = po_items
PO_ITEM_ACCOUNT_ASSIGNMENT       =
PO_ITEM_SCHEDULES                =
PO_ITEM_CONFIRMATIONS            =
PO_ITEM_TEXTS                    =
PO_ITEM_HISTORY                  =
PO_ITEM_HISTORY_TOTALS           =
PO_ITEM_LIMITS                   =
PO_ITEM_CONTRACT_LIMITS          =
PO_ITEM_SERVICES                 =
PO_ITEM_SRV_ACCASS_VALUES        =
RETURN                           =
PO_SERVICES_TEXTS                =
EXTENSIONOUT                     =
check sy-subrc = 0.
loop at po_items.
write:/ po_items.
endloop.
Check this program too:
RFFMFG_INV_CANC_ALL for BAPi_PO_GET_DETAIL.
Hope it helps you.
Regards,
Anjali

Best practises regarding generation of the EOImpl and VORowImpl java files

Greetings,
I was wondering what is the best practice/suggested approach regarding generation of the EOImpl and the VORowImpl java files for ADF Business Components.
From the maintenance point of view, it makes sense to generate them only if you want to put some custom code in those e.g. validation or transient attribute.
However from performance point of view, does it help to have these EOImpl and the VORowImpl java files generated.
Any thoughts on this will be a lot helpful.
regards - rutwik

Hi
Sections:
* 5.11.3.3 Attribute Indexes and InvokeAccessor Generated Code
* 6.9.4.4 Attribute Indexes and InvokeAccessor Generated Code
Explain the details of the generated code for view object row classes and entity object row classes, respectively.
As described in the guide, the key benefit of the generated code is not performance, but of type-safe access and having a place to put custom code when needed.
When you don't have a generated row class, then there is no typesafe method like getSal() to get the Sal attribute.
Section 4.4.9 Generic Versus Strongly-Typed APIs gives a few more details on that and both 5.11.1.1 Generating Bind Variable Accessors and 5.11.1.2 Generating View Row Attribute Accessors give some concrete examples of the value proposition of the strongly-typed API's.
Without the typed API's of course, you need to get an attribute value by calling:
yourRow.getAttribute("SomeAttrName");
or
yourRow.getAttribute(3); // integer attribute index (zero-based) [see section 5.11.3.3 in the guide]
Since it's rare that someone will like to use the numerical approach, then let's assume that people would go with the generic getAttribute("SomeAttrName") way.
Internally, the framework will need to find the attribute index based on the attribute name before accessing the attribute. If you perform this attribute-name-to-attribute-index lookup a zillion times, then of course it would end up representing some overhead that you could avoid by either using the numerical index yourself, or generating the strongly-typed class. The generated code avoids the need to lookup the attribute by string name and also provides the compile-time checking (i.e. typesafe access) in your code.
So, the performance of using the attribute index access (or the generated code) that is ever-so-slightly faster than using the attribute access by string name, not necessarily the generation of code itself that makes things faster. The performance shouldn't be the basis of the strategy decision, but if they see the value of typesafe access then it might be worth the extra files -- some perhaps containing no custom code -- being generated for them.
Hope this helps
rgds
susan

If my Adobe Muse and Air apps are both up to date as of today and I cannot open a Muse file, what are my options? I get an error message regarding the Progress Window showing and then Muse crashes.

If my Adobe Muse and Air apps are both up to date (as of today) and I cannot open a Muse file, what are my options? While Muse is relinking assets I get an error message regarding the Progress Window "showing" and then Muse crashes.

Hi there,
Do you get this error while opening a particular file or all files?
Please try opening a different .muse file, and check if it does the same?
Ar you opening a .muse which is saved on a network drive?
Thanks.

Questions on the comparison between Oracle Forms and Oracle APEX

Hi All,
The link below presents information about Oracle Application Express for Oracle Forms Developers, the table at the end of the page shows a comparison between Oracle Forms and Oracle APEX, all the points of comparisons are clear for me except 3 points which are:
•Locking, what is meant by locking models?
•Database Connections, what is meant by Synchronous/Asynchronous connections in Oracle Forms and Oracle Apex?
•Architecture, what is meant by 2tier and 3 tier connections?
http://www.oracle.com/technology/products/database/application_express/html/apex_for_forms.html
What I need is a simple explanation for these points without deep details.
Thanks

Hi
That is how I understand that document:
Locking: Forms, by default, locks a row as soon as the user starts modifying the data. That is pessimistic locking. Apex, on other hand (and optionally forms also) do not lock the record, but before applying any changes checks if the data has changed since the user queried it (what for some reason is called optimistic "locking")
DB connections: I am not sure why they used the terms synchronous/asynchronous, but the difference is that Forms, by default, keeps an permanent DB connection while the user is using the application, while Apex gets a connection from a connection pool every time a page is requested/submitted.
Architecture: Forms (in its web version at least) has 3 tiers: the browser, the appserver where the forms service runs and the database. As Apex runs inside the database, there are only 2 tiers: the browser and the database (though you still may need an http server in between which serves static content, I don't think it is considered part of the application in this context). If you are talking about client/server forms, then there are only 2 tiers.
I hope this helps!
Luis

Comparisons of Duration, Date and Time Values

Hello,
Is there way to simulate support for XPath 2.0 date/time comparison functions?
(can I create a module to replace currently available XPath functions with my
own?)
Are there plans to fully support those functions?
For example: func-date-less-than
http://www.w3.org/TR/xquery-operators/#func-date-less-than
... snip ...
( time-less-than( time("12:00:00"), time("23:00:00+06:00") ) )
... snip ...
Regards,
Benjamin Shrom.

Just use lt on the dates, dateTime and time elements
<db>
     for $PB_BB.CUSTOMER_1 in document("PB-BB")/db/CUSTOMER
     where ($PB_BB.CUSTOMER_1/CUSTOMER_SINCE lt $#customer_since_cutoff of type
xs:date)
     return
     <CUSTOMER>
          <CUSTOMER_ID>{ xf:data($PB_BB.CUSTOMER_1/CUSTOMER_ID) }</CUSTOMER_ID>
     </CUSTOMER>
</db>
- Mike
"Benjamin Shrom" <[email protected]> wrote:
>
Hello,
Is there way to simulate support for XPath 2.0 date/time comparison functions?
(can I create a module to replace currently available XPath functions
with my
own?)
Are there plans to fully support those functions?
For example: func-date-less-than
http://www.w3.org/TR/xquery-operators/#func-date-less-than
... snip ...
( time-less-than( time("12:00:00"), time("23:00:00+06:00") ) )
... snip ...
Regards,
Benjamin Shrom.

Comparison of ASA-CX and normal ASA

Hi all,
Is it possible to get some comparison table or document that highlights main advantage of using CX over normal ASAs ?

There no advantages/disadvantages one over another. CX is not a standalone ASA, but a module (hardware or software), wich complements normal ASA with some extended function, as Application Visibiltiy And conrol and web filtering. Technically, CX is module, wich allows the ASA perform functions, usually done by cisco ironport VSA.
Traffic, after being filterd by "normal" asa is redirected to CX for further inspection and policies application.
You can see session on ciscolive365.com regarding CX or just google what it is. And, as I said, you souldn't compare them.

Comparison of Classic GL and New GL

Hi:
I have searched google but
could not find any good post
satisfying my query..Can someone
elaborate the new features in NEW
GL accounting that were not in
Classic GL ...I want to know the
comparison between these two.
Moderator: Please, try and search again

Hi James,
Here are certain features of NEW G/L .
1) NETWARE CONCEPT(ONLINE)
2) SEGMENT WISE REPORTING
3) FOREIGN CURRENCY REVALUATION BASED ON ACCOUNTING PRINCIPLE
4)MULTIPLE LEDGERS IN CURRENCIES
REGARDS,
BINAPANI

Question regarding ONT connection via Ethernet and Cable cards

Hi,
We recently upgraded to Fios Quation 150Mbps/65 plan. We are not getting the advertised speeds (we only get like 5mbps upload) so verizon is sending a tech to switch the ONT connection from coax to ethernet.
I have 2 questions regarding this new setup:
1. If the ONT communicates with the Fios Actiontect router via ethernet instead of coax from now on, How will the set top boxes and Tivo-esque cable card powered device I currently have connected to coax, talk to the verizon system from now on, if coax is taken out of the equation? Will fios signal still flow through the internal coax wiring of the house? And moreover, I was under the impression that coax was the way set top boxes communicated and derived independent ip addresses from the Fios router, for on deman purposes and what not. How will this work from now on?
Quiestion 2.
Right next to the wall where the ONT sits, theres's a basement office where we have a PC that connects to the Fios system via an Actiontect MoCa adapter (ECB2500C) which I assume derives it internet connection from the Fios Actiontec router which sits upstairs in the living room.
Again, with the Coax about to be disabled next Friday in favor of ethernet connection from the ONT, I assume this PC will be left without internet because of the lack of internet signal in the coax? Is this correct?
Question 2.5 If my above assumption is correct, since this office is right on the other side of the wall where the ONT sits outside the house, would it be possible to run an ethernet wire through the wall that connects straight from the ONT to an ethernet switch inside the office, from which I would derive a connection for this basement PC (properly firewalled of course) and then, from said switch, continue running the ethernet wire that would ultimately reach the Actiontec Fios router upstairs from which the rest of the house derives it's internet? and would this setup affect in any way the propper functioning of the cable boxes in the house?
I'd appreciate your input and any help you can provide so I can have a ballpark idea of what to tell the Fios guy to do when he comes on Friday.
Cheers.
Solved!
Go to Solution.

It's not valid to have two devices connected to the ONT, PC and VZ Router. Must be a single device. The ONT locks onto the MAC Address of the first device it sees. Since you have TV you should have the VZ router as the internet facing router.
Other options:
1. Have the VZ Router located next to the PC in the basement and then use Wireless for all other PC's.
2. Have the VZ Router located next to the PC in the basement but run one wire upstairs and connect a switch where other PCs and devices can connect via a wire.
Hope that helps.

Regarding comparison of f-01 and fbm1

Similar Messages

Maybe you are looking for