REGARDING CONFIGRING THE PB30 IN REAL TIME

can we configure the pb 30 in IDES trainig server. if it is possible how we will configure the settings?
please help in how we will configure the in real time?

Try this
SPRO -> Personnel Management -> Recruitment -> Dialog Controls -> Change Action Menu
SPRO -> Personnel Management -> Recruitment -> Dialog Controls -> Dynamic Actions in Recruitment -> Create Dynamic Actions

Similar Messages

Desing requriment for processing the IDOC in real time

hi Gurus,
we have a requirement to design for processing the IDOC in real time i.e.all the IDOC must be store and process for give time line with out using BPPM tool.we have suggested to use cache storage or storing the files in file adapter.
please suggested good process with out compromising the Performance of PI.
regards
shankar

hi Raj,
Please find the example below for your reference
let say
System A-->PI--
>system B
system A sends multiple files based on time(daily or weekly) and real time( as an when the record created) to systerm B (CRM) in the form of IDOC Via. PI
we needs to club the real time files and send it to system B.How best we can do without using BPM.
regards
shankar

How can I find the minimum in real time

I 'am doing some type of sensing mechanism. I that the data is step count versus intensity. So I want to record the minimum in real time from. Please kindly help

Hi perumpadapu,
you should have learned by now to provide some meaningful example (data)…
There are functions to detect minima: ArrayMinMax, "smaller than" comparison, PtByPtArrayMinMax, MinMax comparison, ...
It all depends on your data!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Welcome to the Oracle JRockit Real Time forum

The JRockit forum over at forums.bea.com is since the first of July in read only mode - this is now the official forum for the JRockit Real Time product.
Best regards,
Stefan

Bonjour "Etudiant from Tunisia",
I'm not sure what you mean with "please give me the user/password".
As far as I know there is no online OWB available where you could try out the product (if that is what you mean).
If you would like to learn more about OWB, read online documentation or for instance the link that is provided in an earlier post in this thread.
Otherwise simply install OWB and try it yourself. The Installation and Configuration Guide is clear enough even without much experience installing Oracle software, and the OWB User Guide provides some basic insight on working with OWB itself.
Good luck, Patrick
ps If people are still expecting what Igor mentioned when he started this forum ("Oracle Warehouse Builder (OWB) product management and development will monitor the discussion forum on regular basis"), don't count on it; fortunately the product itself has been around long enough now, there are quite some users that can share usable insights and/or drop some useful lines on the new threads... ;-)

What is the difference between Real-Time (RR) and Time-Sharing (TT)?

Hi Guys,
I am trying to distinguish between LMS process priorities of Real-Time Vs Time sharing and was not able to find any good document explaining me the difference between them. May be one of you Gurus can explain the difference between TT and RR? Any metalink doc id or any url on this issue will be appreciated.
--MM

Hi, Time Sharing scheduling is based on credits that are allocated to the process while creation and as long as process keep consuming the OS resources (CPU etc), its priority keeps on changing dynamically (Because process has lost credits) where as processes with Real Time Scheduling are given priority over other processes configured with Time Sharing (even kernel resources).
In simple terms, if LMS is configured with Time Sharing scheduling on a very busy Oracle RAC system, LMS process may contend for the CPU resources, which may cause performance bottleneck in cluster environment.
In Oracle Real Applicaiton Cluster, various organizations has gained performance benefits of setting few Oracle processes such as LMS with Real Time scheduling.
Thanks & Regards
-Harish Kalra

Need to monitor any file change in the system, in real time

Hi,
I am running a program that I suspect may be doing changes in the filesystem, but I do not know which ones. I would like to know if there is a daemon/program that could help me monitor those changes. I tried AIDE, however, it works by creating a database of checksums for each file and does not report in real time potential changes. I would rather use a program that logs changes and timestamp them. Furthermore, AIDE is not useable with /var files, since there are many of them and they change so often. Is there another good solution?
Alternatively I would like to run the program with monitoring. For instance, run the process as:
monitor_program my_program_to_monitor logfile
This would dump in logfile what my_program_to_monitor does to the filesystem.
Thanks in advance.
Last edited by zebulon (2011-08-24 15:44:10)

no, at least with inotifywait, it is not possible. once you know what file is being changed you can use "lsof" to see what process have opened that file.
i tried the following to search lsof output first thing when inotifywait finds a file change.
file=$(inotifywait -r /home/mang/watch --format %w | sed 's/.$//'); lsof | grep $file
while in another terminal running "vi /home/mang/watch/test"
the output is:
zsh 12574 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
vi 16790 mang cwd DIR 254,11 4096 4723089 /home/mang/watch
try it!

The problem with Real-Time Data Acqusutuin

Hi , all
I created ds with Generic Delta : Delta-Specific Fields pointed time stamp and in settings checked Real-time Enabl . After that created modeling in BW , made initial update like discribed in SAP Documentation , created one more infopackage with adapter :Real-time extraction from sap , assigned infopackage and dtp to daemon and started job of daemon .
Request stay yellow all of time and dosn't bring no one records of changes in R3 . Anybody know what is the couse for that? Maby I forgot to check something anywhere or star trigger anyone!?

The following setup working fine for me
In R/3 for Generic Delta ---
        Filed Name - AEDTM
        0Calday -- Radio Button - 'ON'
        Upper Limit - 0
        Lower Limit - 2
        Real_Time enabl - Check Box - 'ON'
        New Status for changed records - Radio Button - 'ON'
In BI
    Create infopackage (init) for replicated datasource
    Execute the DTP to load this init data to DSO.
    Do NOT activate DSO
    Now create another Infopack (real_time Enable & ) and create real-time DTP.
In RSRDA
    Create a Daemon
    Assign InfoPack & DTP to Daemon.
    Now start daemon...Here the message says something like 'one of the request is not activated'.
    Now, select DTP under Daemon --> use menu Edit --> Repair Chain --> Execute
    (If repair chain is not yet there then Daemon --> use menu Edit --> Repair Chain --> Generate and
     once this is done execute the using the above path). Once the chain finishs
    Now start Daemon and refresh.
    Now u can see, an open request (yellow) under infopackage.
    As soon as the new records gets load into PSA, then an open request starts under DTP.
    (Note: If no new data available in PSA, no open request starts under DTP)
Also note that, RDA requests (in PSA & DSO Manage) should always be in yellow, that means Real-Time Aquisition is working.

Hi , i think i will have a look an te AVI tools, what i am most interested in is looking at sending voice across the internet in real time.

Hi Kyle, what i am looking at is sending voice in real time across the internet using labView functions i dont want to bring in another application and make things more complicated.

I am not sure exactly what you are asking. If you have a previous post which Kyle answered I would suggest just posting back to it.
However if you want to send data across TCP in LabVIEW there are some TCP VIs that are quite easy to use. You open a connection, write and read from that connection, and then close it. However data send over TCP using the TCP VIs is sent as a string, not as "voice" however I am not sure what data type you are currently using.

How can I make the x axis real time?

I would like to know how to make the X axis of a chart/Graph into realtime so that I can go in increments of seconds or milliseconds. How can I do this? I am getting some really funny stuff on my graphs and I notice the manual says that the "Time" label is just a default label. So I would like to know how to get the "real" time on my axis. Do you have any good ecamples?
Thanks,
Brian

Zvezdana,
I don't have LV 7, (I have 6.1) so that executable didn't come in. Also with what you mentioned won't I just get the time and date in seconds? what I want to get is the data ploted for the amount of time that the VI is running or that my Kodak Imaging board has been programmed to cycle within. I am going to attach some of the stuff I have been getting, I don't know if it is REAL TIME ,which I want, or if it is not.
Attachments:
Question_for_engineers.doc ‏20 KB
Test_for_technicians.zip ‏347 KB
Front_Panel1d.jpg ‏83 KB

About using the labview in real time DAQ system

Hi All
    I designed a DAQ board based on PCI bus by myself, using labview for my graphic display application software. DAQ board generate PCI interrupt every 20us(50kHz). then PC respond it and read the data from DAQ board, that means the sampling frquency is 50kHz. the DAQ driver is generated by NI-VISA. it goes well after installing. I am sure that VISA detecte the PCI interrupt and triger a PCI interrupt event every 50kHz.
    But I face a problem, labview can not respond reading data in a real time. so does labview can not be used in the real time system? or is there something wrong with other else? if that is true, how can I solve it?
    by the way, I read the VISA help document. found there are two ways to respond PCI interrupt. one is callback, the other is queuing. I use the second way. I beg your help.

I think you can use buffered signals with some changes on your circuit, with real time can be hard to implement with not supported hardware.
Best regards

Is it possible to hear yourself on the mic in real time?

i know some recording devices that do this. when you make a noise into the mic, the sound goes right into your headphones. i figure it would be useful if i could do that, but i'm not sure if i can on garageband. if i can, please let me know.
thanks again

http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen)

How do I modify the angle in real time?

I would like to modify the transformation on the fly without using Alpha, do I just TG.setTransform(Transform3D)?
Urgent, thanks

It worked for me.

Third-party boards with the real-time OS

I have some third-party PXI board and would like to work with it with the NI's real-time OS, provided with
the NI's RT computers (like PXI-8170).
- How do I tell to the OS that there is some board connected to it ? How do I map it I/O ports in the I/O address space of that embedded computer ?
- May I write directly to the I/O ports in this OS ? (E.g., in NT I cannot, I need a driver that runs in kernel mode.)

To program a third party board you can use VISA Register Level Programming. The first thing you'll need to do is to generate an .inf file - this file is used for NI-VISA to properly locate your PXI instrument. To create this file, use the PXI Driver Development Wizard that ships with NI-VISA. This drivers will collect basic information about your board - manufacturer ID, model ID, and interrupt handling (if applicable.) Once the .inf file is created, you can ftp it to the RT controller. You will then be able to use VISA register level code (peeks and pokes, etc) to program the board.
Regards,
Dafna

What is the best way to match clip and sequence settings for real-time editing?

I am a long time FCP user and trying to make the After Effects workflow a little smoother by utilizing the Adobe suite.
One of the most valuable things I miss about FCP is that when I drop a clip in a blank sequence (no matter what the settings of the seq) it will ask if I want to match the settings of the clip. This ensures that no rendering is required to quickly edit the video in real-time.
Is there a plugin or function in Premiere CS4 that I am missing that will afford me this feature? Currently i am doing everything I can to match the clip settings when creating a sequence, but sadly i'm still having to render the timeline to preview the edit.
lh

And in CS4, if there is not a matching Preset, you can choose the Desktop Preset, which will allow you to customize nearly every attribute to match your source footage. The name is a bit of a misnomer, but has been around for a long time. I would have called it the "Custom Preset," but Adobe never called.
Good luck,
Hunt
PS - I just learned something new about CS5 from Curt, because of your question - thanks!

Liquid Analytics enables the sales force in real-time

Problem
The success of wholesale and manufacturing distribution operations largely hinges on the efficacy of sales teams that must deal with a host of pricing and product challenges. For the sales group, the biggest game changer is their ability to access and leverage insight into the customer’s behavior and historical buying patterns.
Due to the technological limitations of the past, the sales team was unable to access information about customers’ buying patterns, leverage new products, establish dynamic pricing, and set realistic goals and as a result would miss opportunities with customers or lose their faith altogether.
Even with these pressing needs noted and observed, not just any technology can be introduced to a sales team and expect to be adopted. This is because the unique characteristics of the sales force must be carefully considered in order to seamlessly integrate new technologies aimed at sales enablement.
Liquid analytics understands the field and the interplay between marketers, sales teams, and customers and uses this knowledge to inform its technology. The firm understands that the sales force operates primarily in the field and therefore does not have the capability to manually input data into sales tracking forms, or that sales teams with different products visit the same customers but do not necessarily work in tandem to leverage each other’s footprints. Without a foolproof means of measurement and assessment in the field, the disconnect between the sales and marketing teams is often heightened making set goals unrealistic for sale representatives.
Solution
Liquid analytics uses its understanding of the sales archetype and big data and predictive analytics to bring viability to its target industries when it counts most. The proprietary technology takes predictive algorithms and mobile tracking, visualizing the various components in a comprehensive, easy-to-use dashboard. For mobile sales representatives, valuable information can be easily searched on an account, and sales activity is easily logged to demonstrate ROI.
For wine and liquor sales representatives, the solution has been proven to do a number of things:
The technology uses algorithms based on history of sales which are able to forecast what will be needed and allows the sales team to make fact- based orders, save time on each customer account by avoiding duplication, and increase customer loyalty. In addition, access to inventory in real time allows the sales rep to deliver in a timely manner and avoid missed shipments by 95 percent.
The Liquid analytics dashboard allows representatives selling liquor, wine or beer to view one universal dashboard to note what sales tasks have yet to be done or have been completed and develop a workflow that collectively benefits all representatives on the account.
The leaderboard creates a gamification experience for the sales team meant to increase sales by incentivizing through potential conversion rates and goal reward system.
On an individual basis, representatives are able to log their hours and use the record to negotiate better terms. Logged hours also provide context as to whether a representative is spending too much time while profitability remains low, leading to new sales strategies.
The feedback loop between the marketing and sales team is closed as the solution generates real-time notifications about where media is used by sales team as well as categorizes product attributes that can be used for better product placement and targeted campaigns.
Watch the Video
Join the conversation and follow us on twitter @SAPstartups #HANAusecases.

Thanks for this pointer.
I followed this link and enabled 0fi_gl_4 for real time reporting in R/3
What do I do now in BW side I already have a infsource that I am updating a DSO/ODS in BW. What do I need to do in BW side to ensure that the data in R/3 will flow through to BW.
Thanks
Karen

REGARDING CONFIGRING THE PB30 IN REAL TIME

Similar Messages

Maybe you are looking for