Regarding Connecting Two Systems

HI,
I hav a doubt, is it psbl to connect Non-SAP System with SAP System through ALE for data transfering, If it can be done can anyone pls send me the details.
Any suggestions will be much appreciated.
Thanks and Regds
Ramesh.

Hi,
The ALE concept involves using external converters to connect non-SAP systems to the R/3 System. External converters are generic format conversion programs.
They have the following properties:
the transfer of R/3 intermediate document (IDoc) formats straight into their own repository so that these data descriptions can be used as source or target structures when assigning data fields.
adoption and conversion of intermediate documents from R/3 Systems via the ALE interface - a remote function call that can be called up using a normal transaction.
conversion of any data format into intermediate document structures and import into the R/3 System via a remote function call (RFC) in the ALE interface.
ALE converters enhance the concept of EDI subsystem interfaces by:
using direct program-to-program communication instead of a file interface to transfer IDocs
recognizing the format of any interface structure of a non-SAP system and not just standard EDIFACT or ANSI-X12 formats.
Also check out this link,
http://www.thespot4sap.com/SAP_Integration_using_ALE.pdf
Regards,
Sakthi.

Similar Messages

Connect two systems (CTS) after independent upgrade

Hello
I've installed two Netweavers with the same types and component.
After that
1) I configured a transport route between the two system.
2) I imported 100s of notes in the first NW
3) I transported the notes in the 2nd NW
Then I updated the two systems INDEPENDENTLY (in parallel):
1st NW: SPAM, SAINT, SPAM
2nd NW. SAINT, SPAM
At the end both systems have exactly the same Support Packages.
Question: What should I check now to be sure that, if in the future a transport changes from the 1st NW to the 2nd, ther will be no trouble?
Thank you and Regards,
Tommaso

Hi,
If the configuration/versions (OS, DB and SAP version along with SPS) of both the systems is same then you need not worry.
Regards,
Nirmal.K

Connect two ECC systems with one SAP CRM 7.0

Hi Gurus!
I have to do a customizing for connect two ECC 6.0 and one SAP CRM 7.0, only I need the organizational structure from both systems and they need update when the structure from CRM has changes. The business partner goes to ECCs system by PI interfaces.
Both organization models are different, so I have to maintain and update depending the changes in the business.
But I don't know if this is possible, I don't know if we can do this by Middleware, ALE or PI.
Can you please, give your oppinion about this topic?
Best regards,
Eugenia.-

Hi Eugenia,
Please see note 1084315 which descriibes the the multiple backend scenario.
This should be relevant here.
Best regards
Christophe

When we connect two bw systems to one R/3 system?

Hi ,
When we connect two bw systems to one R/3 system,
could you please exlain what is the imact to SAP and BW in terms of query performance, batch performance,Develoment ,Quality system,security,BW Support.
Thanks in advance.
Regards,
kranthi

you can connect multiple BW to single R3 source system.
In the delta queue (RSA7 in source system), you have a field with the target system, so you don´t have problem if you have many target bw system, because the data selection is done by system field.
Challenge arises when you have multiple R3 feeding to single BW system and then you have to consolidate the master data say 0material fed from different source system R3 then you can consolidate data using consolidated infoobject.
The following components concatenate to the key of a consolidated InfoObject:
1)source system ID (two-character source system ID; permitted values are stored NW BI table RSSOURSYSTEM)
2)one blank character
3)backend object type (four-character backend object type; permitted values are stored BI table RSBWBEOTYP)
4)master data key value as stored in the source system
Note that the key of a consolidated InfoObject solely consists of non-integrated informations from the different source systems. Integration across source systems results from a (maybee repeatedly applied) data consolidation and cleasing process which unveils duplicate master data keys.
Hope it Helps
Chetan
@CP..

Connect two Solution Manager systems.

Hello,
We are planning to couple two Solution Manager systems.
We want to get all the alerts ABAP+JAVA(Root Cause) from one Solution Manager to the other.
What are te steps to take?
Connect the SLD's?
Connect the systems thru RFC?
Point all the agents to the 2 Solution Manager systems?
Regards,
Mike Geluk

Hello,
It is possible.
For SLD, two options:
- Each Solution Manager can use its own SLD. Then you must define the other server in the SLD, and vice-versa.
- Each Solution manager can connect to a central SLD where the two are defined.
The rest is just like any other managed system configuration: follow the steps in solman_setup.
Best regards,
Guiilherme

Query on connecting two diff user interface systems?

Hi Friends
Is it possible to connect MM system ECC 6.0 EPh4 and SuS system SRM 7.0 to a portal and both buyers from MM side and Suppliers from (SRM component)SuS side logs into portal and buyer should have a buyer role+display role of supplier so that buyer can monitor supplier,If its possible through std/what kind of development needs to be done.
Regards
Micheal

see: /thread/1549422 [original link is broken] for the answer

Connecting two BW systems to the one R/3 source system

Hi all!
I have to connect two BW Systems to one R3 system. In our last tests we have had problems trying to connect two BW servers simultaneously with R/3 source system because it allows only a logical system name for each R/3 client, and (We guess that we need to define tow diferent logical system name, one for each connection). This has been generating errors when we try to load data from R/3 to BW because, we guess, R/3 does not recognize the BW source system in the ALE connection for someone BW systems at transfer data. In this moment I have one connection active (BW1-R3). The BW2-R3 connection is already inactive. Does anybody know how perform this? we need solve the transfers problem as soon as possible.
Thanks! Judi

Ah...
please don't post twice the same question...in these forums we are always the same !!!
You can close this thread to avoid to look in two different posts...
Bye,
Roberto

How do you connect two OSPF autonomous systems?

New member. Pls advise if this post does not belong here. Cheers.
You have two entirely separate OSPF systems. You wish to share routing
information between the two systems, but you don't want to join the
systems into one big OSPF system (you still want two area 0's).
Since OSPF does not use an AS number, as does EIGRP, how do you
redistribute routes between the two systems? Is it as simple as using
an ASBR and redistribute routes as you would any other non-OSPF routing
protocol? In that case, wouldn't configuring two interfaces of an ASBR
to join two different areas, of two different OSPF systems just screw
up the protocol and confuse it?
Thanx
Jim

This is simple, but not so simple. :-) On one of the two routers, run two OSPF processes. Then set the processes up so one runs on all the interfaces except the connecting the two routers, and set the other one up so it runs on the interface connecting the two routers. Redistribute between the two processes.
So, if you have this:
10.2.0.0/16--A--10.1.1.0/24--B--10.3.0.0/16
On A:
router ospf 1
network 10.2.0.0 0.0.255.255 area 0
redistribute ospf 1 (insert metric, type, etc)
router ospf 2
network 10.1.1.0 0.0.0.255 area 0
redistribute ospf 1 (insert metric, type, etc)
On B:
router ospf 1
network 0.0.0.0 0.0.0.0 area 0
I would strongly suggest you use route tags or filters (tags are preferrable) to prevent routing loops between the two ospf processes/domains.
Russ

Connecting two BW systems to 4.6 C OLTP SYSTEM

hello experts,
i got issue while creating source system in BW SYSTEM.
My is i trying to conect single oltp source system(4.6C) to TWO BW clients
one system is having connection already... now i am trying to connect other system.
all the RFC Conections looks fine from the both the systems..
here the problem is i am getting error saying source system cannot to created.
as error occured in the oltp system... when i cheked in R3. THERE IS SHORT DUMP.
.....can pls help on ythis process... what steps do i need to follow
other issue.
same rfc connection between CRM AND BI client.
when i try to create crm source in bi...all rfc connetions are fine
i am getting error is source does not exist.
this is minor issue
i want help on the FIRST ONE.. THAT IS REALLY IMPORTANT
THANKS
NAG

Hi Roberto,
Thaks for your quick answer! that is usefull for configuring the system after the connection! but, I need that the connection work properly first. itsn't the case. We connect the both systems to R3 and defined the background user's for connection, but at moment to transfer data the process is not initiated in R3 (back job) for the BW2-R3 link. But for BW1-R3 does. then, we had changed the BW1-R3 link by changed the logical system name in R3, for connect BW2-R3 and this is working correctly. It is the problem: parallel simultaneous load is not working... do you any idea about this? which task we need perform... or some suggestions? thanks!

How to check the Network Connectivity between two systems.

Hello Everyone,
Please let me know different ways to check the network connectivity between two systems other than ping/traceroute commands.
Thank You.
Edited by: 835435 on Jan 20, 2012 11:43 AM
Edited by: 835435 on Jan 20, 2012 11:44 AM

Use snoop.
snoop -d <nic> - will give requests and replies coming/going in/out of the specified NIC.
snoop -d <nic> <MAC address of the target host> - will give requests coming from the required host.

CONNECTING TWO SUN SYSTEMS

I am new to sun sytems, I recently purchase two systems ultra 60 and sparc 20 I installed both solaris 7, I also have 8port hub, what I would like to know is how do connect these two systems, I don't want go to the outside world yet just home network.
I connect the two systems trough the hub i am getting a link I can ping the machine I am in it but Ican't see the other machine.
this is what I did configuring the network.
# If config hme0 plumb
#if config hme0 plumb 192.6.6.1 netmask+ broadcast+ up
then I went to
# vi /etc/hosts and added that IP address
# 192.6.6.1 micheal
unfortunately I can't see the other system

Make sure both machines are on the same subnet and of course, that they do not have the same IP address.
Unit 1: 192.6.6.1 / 255.255.255.0
Unit 2: 192.6.6.2 / 255.255.255.0

Can a R3 system connect two XI system?

Hi,gurus:
Can a R3 system connect two XI system?In SM59 we have to point the rfc to a single xi.Is it right?

If my scenario is about idoc,we can define two RFC in SM59,
and two partners in WE21 and two ports in WE20,right?
Correct..
If my scenario is about abap proxy,then we can define two RFC in SM59,
and two parameters in sxmb_adm in the R3 side,right?Then in the tcode:SPROXY,
we can see both interfaces in two XI systems,right?
this is not posssible...

Connect sproxy of CRM to two systems XI

Hi gurus,
I comment the question that considers to us.
We have a system CRM connected to XI 3.0 in the Tcode sproxy. We have a research laboratory where we have installed a system PI 7.0.
We want to connect that system CRM to systems XI both by means of the Tcode sproxy.
That is possible? Is there documentation to do it?
Thanks

hi,
>>>>That is possible? Is there documentation to do it?
no in standard this is not possible
Regards,
michal

How to Transport G/L Accounts between two systems?

Hi,
I am trying to move the Chart Of Accounts along with Company dependent data from our Dev to QA system. I used transaction OBY9 to transport the chart of accounts however, it is only transporting chart of accounts related data and I had to re-create those accounts in Company Code.
I also tried to use FS15 and FS16 between two systems however, no luck. Could you please provide any guidance based on your experience?
Thanks,
Durgesh.

Hi John,
For activating ALE for a particular message type there are following prerequisites:
1. Set up the RFC Connection (ABAP) between two systems
2. Configure model view in Sender system
3. Distribute Model view from sender system
4. Generate partner profile from sender system (In sender system go to tcode WE20 go to partner type LS and maintain outbound parameter for message type GLMAST)
5. In receiving system go to tcode WE20 go to partner type LS and maintain Inbound parameter --> Message type GLMAST and Process code GLMA.
Save entries and the above should work for you.
Generate IDOC for one GL Account and try to send company code date for one company code first. The message will appear which says "one idoc transferred".
Regards
Kapil

Connect two BI in one BO server

Hi people,
It´s possible to connect two SAP BI Servers (development and production) in one BO Enterprise X.I 3.1?
More thanks

Hello,
yes it is. You can enter multiple Entitlement Systems in the SAP Are aof the Authentication within the CMC.
Regards
-Seb.

Regarding Connecting Two Systems

Similar Messages

Maybe you are looking for