Regarding consumption report

Dear Guru's,
Is there any report to find the consumption with value in the specified time period.
Regards,
cherukuri

Hi,
Use MB5B to know the stock in the corresponding date.
Use MB51, 201, 261 mvt material issue to cost center & order respectively.
Regards,
Dharma

Similar Messages

Excess Material Consumption Report - For a Particular Period

Hi,
For a particular Time Period, say 30 days, I require excess material consumption report. This report is for the materials ( say ROH, or HALB) that are confirmed through co11n. Taking MTS into consideration with Strategy Group 40, please suggest a standard report (if there is any).
Regards,
Pavan

The T code for viewing the standard report for
Material Analysis - MCP5.
Production Order - MCP3.
Material Usage Analysis - MCRE.
Please try it.
Regards
R.Brahmankar

Item Wise Consumption Report

Hello Friends,
i want to get the consumption report item wise.
IN GL Line item display i am not getting the same and through MB51 by using Movement Type 201 and 261 is not fruitfull.
Actly while preparing of Balance Sheet i need to give the Consumption Detail Item Wise.
Could any one please help me out on this issue.
Thanks
Nitin Jindal

Hi Nitin,
You can develop SAP query T code SQ01 by joining Material and GL Account table to get consumption report output.
Regards,
Santosh

Material consumption report for sales made artcle wise - help urgent

Hi Folks,
My client need a report which consist of
The raw material consumption report
1. Article wise (material group)
2. QTY
3. Value
4. or all sales made for foreign customers
5. Business area
Please help me
Thanks
Narasim

Hi,
Check COOIS report.
It will show the consumption order wise just filter Movement type 261.
Regards,
Shayam

Consumption report for nn stockable material

hi
i want to see the consumption report for non stockable material like A,K,

Hi
Check it in MB51
Thanks
Regards,
Raman

Demand ~ Consumption report

Hi All,
Is there any way I will get Demand versus Consumption report. My client wants that. But i do not know if there is any standard transaction for that.
Client put demand as per forcasting say 10 qty for Jan . But sales order comes for 5 qty. so demand for 5 qty is still open. Next month again client will put demand for say15. The stock will increase to 20. So is there any method he can see the demand~consumption report so that he will put demand for
15 - 5 = 10 only.
Regards,
Samar

Please look into MC87..
Hope it will definitely help..
karthick

Consumption report Date to date ,Group & itemwise

Dear Sap Expets,
Can you please advise me that i want to make consumption report Date to date ,Group & itemwise ,in summary report (Total Qty and Value consumed).How is the possible it?
Thanks
mohit

Hi,
Use MB5B report for the same, it will give you qty & values for overall receipts and issues for certain period or else refer report MC.2
Hope this will resolve your issue.
Thanks & Regards,
Sandesh Sawant

Consumption report showing old purcahse orders

Hello experts,
I am executing a consumption report. It is showing old purchase requisitions.
I do not need them.
How do i make it not to appear inthe report
please advise,
Thanks in advance
Sanjeev

Hi,
Set the deletion indicator or the close indicator using ME52N.
Regards,
Santosh

Consumption report to be tallied with GL

Hi,
I need consumption report value to be tallied with GL account. Which report is suitable for my requirement? can any one give the report tcode?
govind.

Hello,
Currently I am not infront of the system. I could not tell you the exact transaction code.
However, go to
SE16
Put the table name TSTCT (Language you select EN)
In Transaction Code field you put M* (It gives you all the transaction codes of MM)
and Number of entries you put 99999999
Now press Ctrl+F and find consumption
Compare this with FS10N.
Hope this solves your problem.
Regards,
Ravi

Consumer category-wise consumption report

Hi all,
Please guide me in getting consumer category-wise consumption report.
There are 10 categories of consumers. I want to generate consumption report for these consumers.
Thanks and Regds.,
Vijay

Hi,
Not sure i followed your question completely..
lets say that customers are classified as 'Residential' - RES
and 'Commercial' - COM.
For these customers.. there will be Contract Accounts and contracts and installations associated to it.
In the installation check the field 'Billing Class' , so based on the type whether 'RES' or 'COM' you need to hit the table ERDK to fetch the invoices for the corresponding Contract Account and
check again the tables DBERCHZ1 to extract the consumption by passing the same invoice number(in sap the 'Print document' number -field ERDK-OPBEL).
Based on the category selected by the user on the selection-screen either RES or COM. you can display in output report
Hope it helps.
Regards
Vinay

How to create consumption report

hi all
thanks in advance
i want to create consumption report in mm
can u send logic and code which easy and fast for me
please
thanks

Hi Anand,
Gothrough the following codes, i think it will help you...
Use MB51 which is a universal report for all,Use the appropriate Mvt.Type to get the consumption report
Use tcode MB52 to get consumption report.
Check the t-code MCSK
Use MB5M you can get the consumption report
use MB5B
Reward if useful.
Regards,
Harish

Material Consumption Report all expert requested to check my code

Hi all guru
Plz
I am creating Material Consumption Report
so all expert are requested to check my code
bcz its giving me wrong value change if nessary
*& Report Z_MATERIAL_CONSUPTION
*&IEDK901096
REPORT Z_MATERIAL_CONSUPTION
LINE-COUNT 65(2)
LINE-SIZE 345
MESSAGE-ID zate_msg
NO STANDARD PAGE HEADING.
*T A B L E S
TABLES:MARC,
       mara,
       makt,
       mard,
       mbew,
       mseg,
       mkpf.
T Y P E S
Types for MARC
TYPES: begin of ty_marc,
        matnr LIKE marc-matnr,
        werks LIKE marc-werks,
       end of ty_marc.
********Types for T001W*****
TYPES:BEGIN OF ty_t001w,
        werks LIKE t001w-werks,
        name1 LIKE t001w-name1,
      END OF ty_t001w.
********Types for MARA*****
TYPES:BEGIN OF TY_MARA,
       matnr LIKE mara-matnr,
       mtart LIKE mara-mtart,
       matkl LIKE mara-mtart,
      END OF ty_mara.
********Types for MAKT*****
TYPES:BEGIN OF ty_makt,
       matnr LIKE makt-matnr,
       spras LIKE makt-spras,
       maktx LIKE makt-maktx,
       END OF ty_makt.
********Types for MKPF*****
TYPES:BEGIN OF ty_mkpf,
       mblnr LIKE mkpf-mblnr,
       budat LIKE mkpf-budat,
END OF ty_mkpf.
********Types for MSEG*****
TYPES:BEGIN OF ty_mseg,
        mblnr LIKE mseg-mblnr,
        mjahr LIKE mseg-mjahr,
        matnr LIKE mseg-matnr,
        werks LIKE mseg-werks,
        menge LIKE mseg-menge,
        END OF ty_mseg.
Types for main **************
TYPES: begin of ty_main,
        matkl LIKE mara-mtart,
        mtart LIKE mara-mtart,
        matnr LIKE mara-matnr,
        werks LIKE marc-werks,
        name1 LIKE t001w-name1,
        maktx LIKE makt-maktx,
        budat LIKE mkpf-budat,
        mblnr LIKE mseg-mblnr,
        mjahr LIKE mseg-mjahr,
        menge LIKE mseg-menge,
        menge1 LIKE mseg-menge,
        bwart LIKE mseg-bwart,
        ret_qty LIKE mseg-menge,
        ret_*** LIKE mseg-menge,
        unit_qty LIKE mseg-menge,
        unit_*** LIKE mseg-menge,
        wip_qty LIKE mseg-menge,
        wip_*** LIKE mseg-menge,
        sub_qty LIKE mseg-menge,
        sub_*** LIKE mseg-menge,
        oth_qty LIKE mseg-menge,
        oth_*** LIKE mseg-menge,
        end of ty_main.
Types for main2 **************
TYPES: begin of ty_main2,
        mblnr LIKE mseg-mblnr,
        werks LIKE marc-werks,
        mjahr LIKE mseg-mjahr,
        menge LIKE mseg-menge,
        bwart LIKE mseg-bwart,
        matnr LIKE mara-matnr,
        mtart LIKE mara-mtart,
        matkl LIKE mara-mtart,
        end of ty_main2.
*I N T E R N A L    T A B L E S
DATA:it_mara   TYPE ty_mara OCCURS 0 WITH HEADER LINE,
     it_marc   TYPE ty_marc OCCURS 0 WITH HEADER LINE,
     it_t001w TYPE ty_t001w OCCURS 0 WITH HEADER LINE,
     it_makt   TYPE ty_makt OCCURS 0 WITH HEADER LINE,
     it_main   TYPE ty_main OCCURS 0 WITH HEADER LINE,
     it_main2   TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_mkpf   TYPE ty_mkpf OCCURS 0 WITH HEADER LINE,
    it_mseg   TYPE ty_mseg OCCURS 0 WITH HEADER LINE,
     it_mseg   TYPE ty_main OCCURS 0 WITH HEADER LINE,
     it_dept   TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_unit   TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_WIP    TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_subcon TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_others TYPE ty_main2 OCCURS 0 WITH HEADER LINE.
**********I N T E R N A L   T A B L E S for Cumulative Calculation**********
DATA:it_mseg1   TYPE ty_main OCCURS 0 WITH HEADER LINE,
     it_dept1   TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_unit1   TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_WIP1    TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_subcon1 TYPE ty_main2 OCCURS 0 WITH HEADER LINE,
     it_others1 TYPE ty_main2 OCCURS 0 WITH HEADER LINE.
W O R K   A R E A
DATA:wa_mara TYPE ty_mara,
     wa_marc TYPE ty_marc,
     wa_t001w TYPE ty_t001w,
     wa_makt TYPE ty_makt,
     wa_main TYPE ty_main,
     wa_main2 TYPE ty_main2,
     wa_mkpf TYPE ty_mkpf,
     wa_mseg TYPE ty_mseg,
     wa_mseg1 TYPE ty_mseg,
     wa_dept TYPE ty_main2,
     wa_ret_qty TYPE ty_main2,
     wa_ret_*** TYPE ty_main2.
V A R I A B L E S D E C L A R A T I O N
DATA: MYDATE TYPE SY-DATUM,
      per_qty TYPE p,
      ***_qty TYPE p ,
      final_total TYPE p DECIMALS 2.
S E L E C T I O N S C R E E N
SELECTION-SCREEN:BEGIN OF BLOCK B1 WITH FRAME TITLE text-001.
PARAMETERS:Plant LIKE marc-werks DEFAULT '1023'.
select-options:Mat_Grp     FOR mara-matkl,
                 Mat_Type    FOR mara-mtart,
                 MATERIAL    FOR MARC-MATNR,
                 Period      FOR mydate.
PARAMETERS:Year LIKE mseg-mjahr DEFAULT '2007'.
SELECTION-SCREEN:END OF BLOCK B1.
I N I T I A L I Z A T I O N
INITIALIZATION.
MATERIAL-LOW = '100'.
MATERIAL-HIGH = '200'.
APPEND MATERIAL.
*MAT_TYPE-LOW = 'ABF'.
*MAT_TYPE-HIGH = 'FERT'.
*APPEND MAT_TYPE.
*MAT_GRP-LOW = '100'.
*MAT_GRP-HIGH = '200'.
*APPEND MAT_GRP.
*PERIOD-LOW = '20071001'.
*PERIOD-HIGH = '20071031'.
*APPEND PERIOD.
S T A R T O F S E L E C T I O N
start-of-selection.
PERFORM it_mara_data.
PERFORM it_marc_data.
PERFORM it_t001w_data.
PERFORM it_makt_data.
PERFORM it_mseg_data.
PERFORM it_mseg1_data. "CUMULATIVE CALCULATION
PERFORM it_mkpf_data.
PERFORM it_dept_data.
PERFORM it_dept1_data. "CUMULATIVE CALCULATION
PERFORM it_unit_data.
PERFORM it_unit_data1. "CUMULATIVE CALCULATION
PERFORM it_wip_data.
PERFORM it_wip_data1. "CUMULATIVE CALCULATION
PERFORM it_sub_contract.
PERFORM it_sub_contract1. "CUMULATIVE CALCULATION
PERFORM it_main_data.
T O P   O F   P A G E
TOP-OF-PAGE.
WRITE: /1 'INOX AIR PRODUCTS LTD',plant,it_t001w-name1,
       /1 'TOTAL CONSUMPTION FOR THE PERIODE:',Period-low,'To',period-high.
skip 2.
FORMAT COLOR 1.
ULINE.
WRITE: /1'|','CODE ' ,
        15 'MATERIAL' ,
        30 'DESCRIPTION',
        90'CONSUMPTION' ,
        135'RETURN FROM DEPT.' ,
        170'INTER UNIT' ,
        210'W.I.P' ,
        240'SUB-CONTRACTOR' ,
        275'OTHERS' ,
        310'TOTAL',345'|' ,
       /1'|',15 'TYPE',
        85'FOR PERIOD' ,
        100 ' CUMULATIVE' ,
        130'FOR PERIOD' ,
        145 'CUMULATIVE' ,
        165'FOR PERIOD' ,
        180 'CUMULATIVE' ,
        200'FOR PERIOD' ,
        215'CUMULATIVE' ,
        235'FOR PERIOD' ,
        250'CUMULATIVE' ,
        265'FOR PERIOD' ,
        280 'CUMULATIVE' ,
        300'FOR PERIOD' ,
        315' CUMULATIVE' ,
        345'|' .
ULINE.
E N D   O F S E L E C T I O N
end-OF-SELECTION.
PERFORM display_data.
FORM it_mara_data.
    SELECT matnr
           mtart
           matkl
      FROM mara INTO CORRESPONDING FIELDS OF TABLE it_mara
      WHERE matnr IN material       AND
            mtart IN mat_type AND
            matkl IN mat_grp.
ENDFORM.                    " it_mara_data
FORM it_marc_data .
select matnr
       werks
from marc
into CORRESPONDING FIELDS OF TABLE it_marc
        FOR ALL ENTRIES IN it_mara
WHERE MATNR eq it_mara-matnr AND
        werks eq plant.
ENDFORM.                    " it_marc_data
FORM it_makt_data .
SELECT
        matnr
        maktx
        FROM makt INTO
        CORRESPONDING FIELDS OF TABLE it_makt
        FOR ALL ENTRIES IN it_mara
        WHERE matnr eq it_mara-matnr.
ENDFORM.                    " it_makt_data
FORM it_main_data .
*BREAK-POINT.
loop at it_mara.
    wa_main-matnr = it_mara-matnr.
    wa_main-mtart = it_mara-mtart.
    wa_main-matkl = it_mara-matkl.
    READ TABLE it_marc WITH KEY matnr = it_mara-matnr.
    wa_main-werks = it_marc-werks.
    READ TABLE it_t001w WITH KEY   werks = it_marc-werks.
    wa_main-name1 = it_t001w-name1.
    READ TABLE it_makt WITH KEY matnr = it_mara-matnr.
    wa_main-maktx = it_makt-maktx.
    READ TABLE it_mseg1 INDEX sy-tabix.
      wa_main-mjahr = it_mseg1-mjahr.
      wa_main-menge1 = it_mseg1-menge.
    READ TABLE it_mseg WITH KEY matnr = it_mara-matnr.
   READ TABLE it_mseg INDEX sy-tabix.
    wa_main-mblnr = it_mseg-mblnr.
    wa_main-menge = it_mseg-menge.
    READ TABLE it_dept WITH KEY mblnr = it_mseg-mblnr.
    wa_main-ret_qty = it_dept-menge.
   READ TABLE it_dept1 WITH KEY werks = it_marc-werks.
    READ TABLE it_dept1 INDEX sy-tabix.
    wa_main-ret_*** = it_dept1-menge.
    READ TABLE it_mkpf WITH KEY mblnr = it_mseg-mblnr.
    wa_main-budat = it_mkpf-budat.
   READ TABLE it_unit1 WITH KEY werks = it_marc-werks.
    READ TABLE it_unit1 INDEX sy-tabix. "BINARY SEARCH.
    wa_main-unit_*** = it_unit1-menge.
    READ TABLE it_unit WITH KEY mblnr = it_mseg-mblnr.
    wa_main-unit_qty = it_unit-menge.
    READ TABLE it_wip WITH KEY mblnr = it_mseg-mblnr.
    wa_main-wip_qty = it_wip-menge.
   READ TABLE it_wip1 WITH KEY werks = it_marc-werks.
    READ TABLE it_wip1 INDEX sy-tabix.
    wa_main-wip_qty = it_wip1-menge.
    READ TABLE it_subcon WITH KEY mblnr = it_mseg-mblnr.
    wa_main-sub_qty = it_subcon-menge.
   READ TABLE it_subcon1 WITH KEY werks = it_marc-werks.
    READ TABLE it_subcon1 INDEX sy-tabix.
    wa_main-sub_*** = it_subcon1-menge.
    READ TABLE it_others WITH KEY mblnr = it_mseg-mblnr.
    wa_main-oth_qty = it_others-menge.
   READ TABLE it_others1 WITH KEY werks = it_marc-werks.
    READ TABLE it_others1 INDEX sy-tabix.
    wa_main-oth_*** = it_others1-menge.
    APPEND wa_main to it_main.
    CLEAR : wa_main,
            it_mseg1,
            it_main.
    ENDLOOP.
   LOOP at it_mseg1.
     READ TABLE it_mseg INDEX sy-index.
     MOVE-CORRESPONDING it_mseg1 to it_main.
     append LINES OF it_mseg1 TO it_main.
      IF sy-subrc <> 0.
        exit.
        ENDIF.
     ENDLOOP.
ENDFORM.                    " it_main_data
FORM display_data .
SORT it_main by matkl mtart maktx.
LOOP AT it_main ."WHERE menge eq it_mseg1-menge.
at NEW matkl.
    FORMAT COLOR 2 INTENSIFIED ON.
    WRITE:/5 it_main-matkl." COLOR 2.
        ENDAT.
      at NEW mtart.
        FORMAT COLOR 3 INTENSIFIED ON.
         WRITE:/15 it_main-mtart." COLOR 3.
         ENDAT.
       at NEW maktx.
         FORMAT COLOR 4 INTENSIFIED OFF.
         WRITE:/ it_main-maktx UNDER 'DESCRIPTION'.
      ENDAT.
      FORMAT COLOR 2 INTENSIFIED ON.
     WRITE:/75 it_main-menge, "it_main-maktx UNDER 'DESCRIPTION',
            95 it_main-menge1,
           125 it_main-ret_qty,
           140 it_main-ret_***,
           160 it_main-unit_qty,
           175 it_main-unit_***,
           195 it_main-wip_qty,
                 210 it_main-wip_***,
                 225 it_main-sub_qty,
                 240 it_main-sub_***,
                 255 it_main-oth_qty,
                 270 it_main-oth_***.
     FORMAT COLOR 2 INTENSIFIED OFF.
     at END OF mtart.
       sum.
       uline.
       WRITE:/30 'MAT. TYPE WISE SUB TOTAL' COLOR COL_GROUP,
              60 IT_MAIN-MTART COLOR 2,
              75 '*',it_main-menge,'*' COLOR 4,
              95 it_main-menge1,
              125 it_main-ret_qty,
              140 it_main-ret_***,
              160 it_main-unit_qty,
              175 it_main-unit_***,
              195 it_main-wip_qty,
                 210 it_main-wip_***,
                 225 it_main-sub_qty,
                 240 it_main-sub_***,
                 260 it_main-oth_qty,
                 270 it_main-oth_***.
       uline.
       ENDAT.
       at END OF matkl.
       sum.
       uline.
       WRITE:/30 'GROUPWISE SUB TOTAL ' COLOR 5,
              60 IT_MAIN-MATKL COLOR 2,
              75 '*',it_main-menge,'*' COLOR 4,
              95 it_main-menge1,
              125 it_main-ret_qty,
              140 it_main-ret_***,
              160 it_main-unit_qty,
              175 it_main-unit_***,
              195 it_main-wip_qty,
                 210 it_main-wip_***,
                 225 it_main-sub_qty,
                 240 it_main-sub_***,
                 260 it_main-oth_qty,
                 270 it_main-oth_***.
       uline.
       ENDAT.
       at LAST.
         sum.
          uline.
          WRITE:/30 'GROSS TOTAL' COLOR 6,
                 60 IT_MAIN-MATKL COLOR 2,
                 75 '*',it_main-menge,'*' COLOR 4,
                 95 it_main-menge1,
                 125 it_main-ret_qty,
                 140 it_main-ret_***,
                 160 it_main-unit_qty,
                 175 it_main-unit_***,
                 195 it_main-wip_qty,
                 210 it_main-wip_***,
                 225 it_main-sub_qty,
                 240 it_main-sub_***,
                 260 it_main-oth_qty,
                 270 it_main-oth_***.
            uline.
        ENDAT.
         per_qty = it_main-menge.
         ***_qty = it_main-menge1.
         final_total = per_qty + ***_qty.
        at last.
         WRITE:/95 sy-uline(30).
           write:/65 'Final Cumulative Qty >>>>>>>>>',final_total color 6.
           WRITE:/95 sy-uline(30).
         ENDAT.
       FORMAT INTENSIFIED off.
    ENDLOOP.
ENDFORM.                    " display_data
                    " it_mkpf_data
FORM it_mseg_data .
SELECT
    mblnr
    matnr
    ZEILE
    werks
    menge
    bwart
    FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_mseg
    FOR ALL ENTRIES IN it_mara
    WHERE matnr eq it_mara-matnr AND
           werks eq plant AND
           bwart eq 261." AND bwart eq 262.
CLEAR it_mseg.
ENDFORM.                    " it_mseg_data
FORM it_mkpf_data .
SELECT
    mblnr
    budat
    FROM mkpf INTO CORRESPONDING FIELDS OF TABLE it_mkpf
    FOR ALL ENTRIES IN it_mseg
    WHERE mblnr eq it_mseg-mblnr." AND
         budat BETWEEN Period-low AND period-high.
ENDFORM.
FORM it_t001w_data .
    SELECT werks name1 FROM t001w INTO CORRESPONDING FIELDS OF TABLE it_t001w
      FOR ALL ENTRIES IN it_marc
      WHERE werks eq it_marc-werks.
ENDFORM.                    " it_t001w_data
FORM it_mseg1_data .
    SELECT
            mblnr
            mjahr
            ZEILE
            matnr
            werks
            menge
            bwart
    FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_mseg1
    FOR ALL ENTRIES IN it_mara
    WHERE matnr eq it_mara-matnr   AND
           werks eq plant          AND
           mjahr eq Year            AND
          bwart eq 261." AND bwart eq 262.
CLEAR it_mseg1.
ENDFORM.                    " it_mseg1_data
FORM it_dept_data .
SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_dept
     FOR ALL ENTRIES IN it_mseg
     WHERE mblnr eq it_mseg-mblnr AND
           werks eq it_mseg-WERKS AND
           bwart ge 291 AND bwart le 292.
ENDFORM.
                    " it_dept_data
FORM it_dept1_data .
     SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_dept1
     FOR ALL ENTRIES IN it_mara
     WHERE matnr eq it_mara-matnr AND
           werks eq plant         AND
           mjahr eq YEAR          AND
           bwart ge 291 and bwart le 292.
    ENDFORM.                    " it_dept1_data
FORM it_unit_data .
SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_unit
     FOR ALL ENTRIES IN it_mseg
     WHERE mblnr eq it_mseg-mblnr AND
           werks eq it_mseg-WERKS AND
           bwart ge 301 AND bwart le 302.
ENDFORM.                    " it_unit_data
FORM it_unit_data1 .
    SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_unit1
     FOR ALL ENTRIES IN it_mara
     WHERE matnr eq it_mara-matnr AND
           werks eq plant         AND
           mjahr eq YEAR          AND
           bwart ge 301 AND bwart le 302.
    ENDFORM.                    " it_unit_data1
FORM it_wip_data .
SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_wip
     FOR ALL ENTRIES IN it_mseg
     WHERE mblnr eq it_mseg-mblnr AND
           werks eq it_mseg-WERKS AND
           bwart ge 301 AND bwart le 302.
ENDFORM.                    " it_wip_data
FORM it_wip_data1 .
     SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_wip1
     FOR ALL ENTRIES IN it_mara
     WHERE matnr eq it_mara-matnr AND
           werks eq plant         AND
           mjahr eq YEAR          AND
           bwart ge 301 AND bwart le 302.
ENDFORM.                    " it_wip_data1
FORM it_sub_contract .
    SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_subcon
     FOR ALL ENTRIES IN it_mseg
     WHERE mblnr eq it_mseg-mblnr AND
           werks eq it_mseg-WERKS AND
           bwart eq 541." AND bwart eq 542.
ENDFORM.                    " it_sub_contract
FORM it_sub_contract1 .
      SELECT
            mblnr
            mjahr
            ZEILE
            werks
            menge
            bwart
     FROM mseg INTO CORRESPONDING FIELDS OF TABLE it_subcon1
     FOR ALL ENTRIES IN it_mara
     WHERE matnr eq it_mara-matnr AND
           werks eq plant         AND
           mjahr eq YEAR          AND
           bwart eq 541." AND bwart eq 542.
ENDFORM.                    " it_sub_contract1

Hi,
When ever you are using a read statement check sy-subrc is initial or not then only you move the data
and clear the work area after use.
The mistake you have done is not clearing the work areas after use and sy-subrc check after read.
If you fail to do so the data will be clubbed and wrong data will be shown.
Regards,
Siva
Pls reward points if usefull .

Columnar Production Consumption Report

Dear Experts,
I require a query report, which will give the columnar Item group wise consumption report (qty and Value) against the respective production order.
Please help.
The Above query is required for consumption of quantities only through production order
Regards,
Rahul Goja.

Hi,
Check this thread first. Let me know your comments:
http://scn.sap.com/thread/3258871
Thanks & Regards,
Nagarajan

Help needed regarding ALV report

Hi,
I have a query regarding ALV report.
The requirement is as follows:-
When the user executes the ALV report and if he sums one numeric field column values and filters out some of the field columns ( for example there r 5 columns in the report and the user has filtered out 2 of them and viewing only 3 columns)
and now the requirements is that when the user runs the report later he should see the modified report ( i mean only 3 cloumns and the total value of the column which he has made) but not the original output which was there when the report was developed.
First of all i wanna know is it possible to do r not. If yes then how
Hope u have got what i want.
eagerly waiting for ur reply.
regards,
maqsood

Hi
Yes you can! You have to manage the layout variant.
So when you call your ALV you have to set the parameter I_SAVE = 'A'.
In this way you'll allow the user to save the variants for layout.
After you has to have a chance to choose the variant in selection-screen.
See the demo program BCALV_GRID_11 to manage the variant in selection-screen.
Max

Regarding Interactive reports

Hi All,
Yesterday i submitted a query regarding Interactive reports.and i recieved lots of reply .But the replies are all about ALV interactive report.I want to know just about the interactive reports where ew use AT LINE OF SELECTION, HIDE e.c.
PLZ send methe documents related that.
Thanks and Regards
RASHMI

Hi
Interactive Reports
As the name suggests, the user can Interact with the report. We can have a drill down into the report data. For example, Column one of the report displays the material numbers, and the user feels that he needs some more specific data about the vendor for that material, he can HIDE that data under those material numbers. And when the user clicks the material number, another report (actually sub report/secondary list) which displays the vendor details will be displayed.
We can have a basic list (number starts from 0) and 20 secondary lists (1 to 21). Events associated with Interactive Reports are: 1. AT LINE-SELECTION 2. AT USER-COMMAND 3. AT PF<key> 4. TOP-OF-PAGE DURING LINE-SELECTION. HIDE statement holds the data to be displayed in the secondary list. sy-lisel : contains data of the selected line. sy-lsind : contains the level of report (from 0 to 21)
Interactive Report Events:
AT LINE-SELECTION : This Event triggers when we double click a line on the list, when the event is triggered a new sublist is going to be generated. Under this event what ever the statements that are been return will be displayed on newly generated sublist.
AT PFn: For predefined function keys...
AT USER-COMMAND : It provides user functions keys.
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

Regarding consumption report

Similar Messages

Maybe you are looking for