Regarding copy of documentation of previous project in sap sd

hi,
In copy of documentation of previous project we need to copy the same to fill up gaps from sd,mm and even pp side for which it will be used for future roll outs/impementations of the projects.as iam new to documentation, i need guidance for copying the documentation.can anybody please helpme.

hi sridhar,
i mean to say the previous project documentation will be copied by filling up gaps to provide the same for future roll outs/implementations which will be uploaded in r/3.thank you for your reply.

Similar Messages

How to hide previous project files??

If you have a client sitting with you at your computer and you have iMovie open for reviewing, etc., you might want to hide previous projects, but iMovie shows ALL previous "events"! How do you hide all past work and start with a "clean" slate without loosing files??

Get an external hd and just move them off by holding down the ⌘ Command key while dragging to move the folders rather than copy them. iMovie doesn't have a simple way to hide those projects, they literally need to be moved out of the iMovies Project folder.
The other quick and dirty way of doing it is go to:
Mac HD > Users > (your home folder) > Movies > iMovie Projects > (drag the folders out to the desktop). These projects can be dragged back in after you are done screening the Project for your client without any damage to the projects at all. So just try dragging them out for now.

CS4 Copy and paste to new Project

When I copy (or cut) and paste an audio clip to a new project timeline the sound is fine but after I save the project I see the video and the sound file but no sound. The sound file still plays in Soundbooth but not on the project timeline. I tried rendering the clip but no lucki. Any suggestions? Thank you in advance.
These are the files properties:
File Path: C:\Heritage\Aftergut\Movie\Untitled Clip 02 Audio Extracted_1
Type: Windows WAVE audio file
File Size: 514.2 MB
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:46:48:19468
Average Data Rate: 187 KB / second

Hi Bill,
I haven't remapped the keyboard. In the CS4 (which I am using) help shows "M" as the key for Match Frame. Also I am targetingthe audio track and moving the CTI over it and pressing "M" as you suggest but no luck.
I guess I will just have to find another work method to complete my project but I really thank you for your efforts on my behalf
Regards
Stanley
Stanley Dalnekoff, President
70 Marvel Road
New Haven, CT 06515
Tel:203-397-0775-O
203-464-4975-C
www.heritagevideo.net
Date: Thu, 3 Jun 2010 09:41:30 -0600
From: [email protected]
To: [email protected]
Subject: CS4 Copy and paste to new Project
Stanely,
One thought - have you remapped your keyboard?
Also, and a CS5 user will have to step in here, it could be that Match Frame has changed. It did between PrPro 2.0 and CS3/CS4, so it is possible. In the CS5 Help file, what is shown for the keystroke?
Last, are you Targeting your Audio Track, Selecting the Audio, moving the CTI over it, and then pressing M?
Just thinking there, and good luck,
Hunt
>

Copying database please help graduation project

Hi all
i am doing my graduation project as computer science student i am doing visual basic for interface and oracle express as a database i have made the tables and everything but i need to copy the whole database to my friend's computers so they can help me inserting the data into the tables so i need basicly to transfer the database to my friend's computer can you help me doing that step by step i'm not that much in Oracle i know only selecting,updating and creating tables
and if you please tell me if there is a way to make auto backup for the database just like the database by itself will do an automatic backup for itself every just like 1 week
if there is a way can you plz provide me with it
if there is no automatic way can you please provide me with the manual way of backing up the database.
regards
wish me luck in my project plz

Hi there,
It helps to specify which version of the database you're using, and the operating system on the computer, and whether 32 or 64 bit. Do this for each end (your computer and your friend's computer). It sometimes helps if you describe a bit about the hardware (eg the amount of memory).
Examples of the first: 8.1.7, 9.0.1.4.0, 9.2.0.8, 10.2.0.3 (and more). I'm not familiar with Db Express, but I assume there's various versions of that as well.
Examples of the second: Windows XP (I pray not), Linux, Free BSD, Max OS X 10.4. Please be as specific as possible: Is your Linux Ubuntu, Red Hat Enterprise, or something else?. What version? What's the output of <tt>uname -a</tt>, or <tt>uname -r</tt>.
You might also give your (first) name, just to be polite.
but i need to copy the whole database to my friend's computers so they can help me inserting the data into the tablesPerhaps a totally different way of skinning the cat: have you considered letting your friend(s) logging into your database remotely? It takes a bit of setting up: for Linux, it'll be a combination of a broadband connection, [http://dyndns.org/], a firewall setting (choose a port for SSH), ssh (eg PuTTY if your friends on Windows), and some usernames/passwords for your friends. Optional: install sqlplus on your friends' computers and use SSH to tunnel the connections across.
auto backup for the databaseMy method is a little unsophisticated, but it works for small databases. Shut down the database (if paranoid, a cycle of <tt>shutdown immediate</tt>, <tt>startup restrict</tt>, <tt>shutdown</tt>), then backup the *.dbf, *.ctl, *.ora (datafiles, control files, and {noformat}[sp]{noformat} parameter files). Whether auto or manual is simply a function of whether you type the commands manually, or get the system to run a script at a regular hour, and you have to burn it to a CD or tape, and have that off-site for complete safety. Or you can back it up over the internet.
If you need further help with remote connections or backup, I'd seek out forums for those particular activities - it's a bit off-topic here.
Nick

How do I copy editted clips from one project file to another?

I am working on a project. At one point, before I finished I "saved as" with another name to give me a backup. After working on it for a while I found that a section of the video had gotten out of place (a lot of clips and layers). I would like to copy this portion from the other project file I had saved. I can't figure it out. Both projects have the same clips in the project bins. I am using Premiere 6.5, with a Pinnacle DV500 DVD capture card. My computer is a duel P3 800, 512RAM, 40Gig Sys. drive and 480 Gig RAID 0. Please Help!

Throw away everything you don't want to copy, save as a new project, import the new project into the other one.

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

How can I copy the titles from a project volume one use them for the rest?

I'm editing a four DVD set, and would like to use the same opening titles and credits for each. How can I copy the titles from volume one and use them for the rest? Thank you.

Open the project that has the titles you want to use. Select (highlight) all the title clips you want, then right-click and choose COPY.
Open the new project(s), then paste the titles onto the Timeline.
Done.
-DH

How do I add another movie to the project area to work on without it being attached to a previous project?

How do I add another movie to the project area to work on without it being attached to a previous project?

No. I have a number of items in the Event Library. I am trying to move some of them to the Project Library and when I do it attaches itself to the other project I have there.

Final cut X-- how do you open previous projects?

i must be missing something really basic. How do you open previous projects in Final Cut X? When I try to open one it hangs on "loading (nameofproject) into time line.

You need to provide more information. Are you seeing it within the FCP interface properly when you go to show the Project Library? If so, I would click on it to select it and then open the Inspection window and click on Modify Event References and select proceed from there. I'm assuming you have not moved the project from it's proper folder....

Regarding EP Guys in the XI Project

Hi Experts,
i have One Doubt Regarding the Implementation of the XI Project.
Is the EP Persons are Must To Implement Any XI Project??????
Should we Maintain the EP Front End Access Compulsary Or We can Maintain Any other Fron End Access Like VB .NET........???????
Please let me Know
Regards
Khanna

Hi Rajesh
I would suggest you to check some docuement about the EAI ( Enterprise Application Integration ) on net.
XI is used for Process Integration, an example like An account holder submits the cheque in Bank, now this cheque needs to be reviewed, passed to another Bank for clearing & then the money will be deposied in the respective account.
This whole process can be designed in XI, initially you need to understand the workflow of the process, its touchpoints & its controls.
This whole business process can be automated where in between it will check the policies/rules ( to process the cheque ) or it can be manual depends upon the Business requirement.
Also EAI is used to connect the process running on different platforms/landscapes.
>>> How these wil Run if you go for Realtime
As I said earlier you need to understand the process, you have to identify who exactly is invoking the process in above example When the person will deposit the cheque in Bank with details.
- Lalit -

Technical documentation for ADF projects - how to and best practices

Hi,
I have a question how to create technical documentation for ADF project expecialy ADF BC and ADF Faces. Is there any tool or JDev plugin for that purpose? What informations should contains documentation for that project, any principles ?Has anybody any experienece. Are there something like documentation best practices for ADF projects? E.g. how to create documentation for bussiness components.
Kuba

I'm not sure there is "best practices" but some of the things that can help people understand are:
An ADF BC diagram - this will describe all your ADF BC objects - just drag your components into a new empty diagram
A JSF page flow - to show how pages are called.
Java class diagram - for Java code that is not in the above two
One more thing to consider - since ADF BC, JSF page flow and JSPX pages are all XML based - you could write XSL files that will actually transform them into any type of documentation you want.

Copy clip markers to new project?

I have a project file that was used by the director to make descriptive markers on clips. it references identical media and it was just a basic project file dupe for the director to use. i'd like to copy the markers in his project and add those to my markers on the clips in my master project. copy/paste just makes a subclip icon in my browser and defeats the purpose of it being a marker. is there an effective way to do this?
thanks,
ryan

Not that I know of Ryan, but could you simply copy his clips to your project file?
Jerry

How do I reopen a previous project I was working on in imovie? Please help

I had to work on two imovie projects. I began the first one and I was about half done. I had to start the second one so I created a "new project". I worked on the second one, but now I want to go back to the first one to finish editing. I go to "Finder" then the "movies" folder, then "imovie projects", then I pick my first movie project I was working on. Imovie doesn't open the first project, it just goes back to my second project, but I want to edit the first. So, how do I open a previous project I was working on in imovie?

Chan17Chan wrote:
... I go to "Finder" then the "movies" folder, then ...
wrong direction ...
in iMovie, far upper left, click on the button 'Project Library'

When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging

Contexts: I am very competent with GFX and have worked on many projects.
When dragging an image onto a fresh canvas, the resizing feature presnaps the image into the canvas size. I can confirm that this has not happened to me in previous projects. I've also tested this problem by making a new larger document size and dragging in the same render. It snaps again. I don't want to re-size from the canvas dimensions, I want to resize from the render's original dimensions.

Ap_Compsci_student_13 wrote:
ok sorry but doesn't sscce say to post the whole code?the first S is Short, and yes, it needs to be all the code needed to illustrate the problem and let use reproduce it. If you were developing a new Web framework, your example might be short, but for a student game it's very long.

Hi sd guru's regarding copy controls

hi sd guru's
this regarding copy controls. i copied sales document type(or)-->bill type(f2).
now my problems is i have to do copy control f2 to credit memo and debit memo.
can anyone tell the detail process please.
thank u,
with regards
sre

Hi sre .... do u wana copy F2 to credit/debit memos or credit/debit memo REQUESTS?
Note that debit memo request is a sales documt n debit memo is a billing document.
I think u wanted to say the the REQUESTs. Coz that is the general requiremnt. But SAP has already provided the copy cotl from F2 to L2(debit memo req) n f2 to G2(credit memo req). So by t-code VTAF(billing to sales doc), u may see that....
Otherwise for copying F2 to debit/credit MEMO, go to VTFF code (billing to billing copy cotl).. Here also SAP has given the copy cotrols u want..
- hope this will clear your doubts. Reward if helpful
Regards,
-Prashant

Regarding copy of documentation of previous project in sap sd

Similar Messages

Maybe you are looking for