Regarding creation of BOM through Master Recipe

Dear all,
I am trying to create a BOM but system is giving a message as BOM can be created through Master recipe only
Please guide me where do we set this and what is to be done to avoid this
Regards
venkat

Hi,
Refer the answers from thread mentioned below.
Re: BOM can only be extended via Master Recipe
Regards,
Lodhi.S

Similar Messages

  • Mass creation of BOM and Master Recipe for Plants

    My client wants to do Mass BOM creation and Mass Master Recipe Creation from a Generic BOM and Generic Master Recipe for all 10 Plants by just a click of button.
    He does not want to use copy function using CSO1 or C201, and do for plants 'one by one'. He finds it very time-consuming. He wants to copy for all ten plants all at once. Please advice how this can be accomplished in the best possible manner, and if by standard SAP.
    Thanks,
    Sac

    Dear Sir ,
    What is LSMW ?
    I want to Copy some bill of material from another plant .I had used T code CS01 for it but only the header bill of material is copied .
    The copy field in CS01 is only for first level boms the subsequent Boms are not copied .
    so is there any other way to do it ? if possible please give the detail procedure .
    Regards
    Pankaj .
    Edited by: pankaj.001 on Mar 9, 2011 10:55 AM

  • Ways to secure BOMs and Master Recipes - Reg

    Hi ,
    Our requirement is to secure certain  Bills Of Materials and Master Recipes .
    Request inputs from the experts to achieve this . We need to maintain certain BOMs and Recipes  such that they are secured and handled by few set of people . I understand we can try doing this with some authorization object at BOM for changes etc.. but are  there better  ways to secure ?
    Regards,
    Madhu Kiran

    Hi ,
    Our requirement is not to restrict changes to BOM , Recipe and track  with ECM .
    Its a  kind of restricting few for the access of BOM , Recipe for which there shall be some kind if a solution using authorization groups creation and mapping . Currently exploring at our end on the same and would be grateful if some one could  provide better advice /methods .
    Regards,
    MK

  • Regarding creation of bom and material in cfolder

    dear gurus,
    i want help from all of u.
    can any one tell me , what is the benefit of creating BOM / material in cfolder instead of R3.???????
    full reward points for useful answer
    thanks
    [email protected]

    Hi,
    cFolders is a collaboration tool (tool used for talking to 3rd parties outside your company.)
    Usually you will not give access to your ERP system to others. In that case you use cFolders as medium of sharing information with others.
    if the 3rd party colleague want to suggest some improvements or modify you design documents etc., he can do it in cFolders. This then can be verified by you in cFolders (once modification is done he can change the status in cFolders which will trigger a notification to you ) then import it to cFolders.
    regards
    Murugesh

  • Process order creation without master recipe creation

    Hi, i have created a finished product and i dont want to create the bom and master recipe for this finished product. when i create the process order for this material, i want system to copy the master recipe of the similar products either manually or automatically. please advise how to achieve the same.

    Dear Raju,
    Check these threads,
    Re: Create Process order without Production Version
    Production Order for a material without BOM and Routing
    Regards
    Mangalraj.S

  • BOM through RECIPE and Specification Data

    Hi Experts,
       I am new to EH&S, I need to create the BOM from the Tcode RMWB, I have the recipe ID and Material,
    I need the spcification DATA from the FORMULA-> INPUT OUTPUT TAB (This data I need to use while creating BOM as Components) ,
    Please help me to find the exact flow of data and getting  the DATA from the table using RECIPE ID, SUBID and Material.

    Hello
    I found these threads or links
    http://help.sap.com/saphelp_recipe21/helpdata/en/60/ee1a3a0792a622e10000000a114084/content.htm
    RMWB Transaction
    BOM/Recipe change with change master
    How to change BOM via Master Recipe
    http://www.kowboyz.nl/blog/bom-can-only-be-extended-via-master-recipe/
    None of them really answer your question but may be could give you a starting point for furthere search.
    I assume that thre are further threads available
    With best regards
    C.B.
    Edited by: Christoph Bergemann on Aug 7, 2010 10:19 PM
    Edited by: Christoph Bergemann on Aug 7, 2010 10:24 PM

  • In LSMW which method is exactly suits for Master Recipe Creation (TC-C201)

    Hi All,
    I am unable to find which method suits for Master Recipe Creation in LSMW.
    Please send me in detail if any method suits.
    Can any body help me in this.
    Points will be awarded for correct answer which helps me come out of this problem.
    Regards,
    Shobha

    Hi shobha,
    if  there is code u have to do before uploading go for BDC or BAPI,
    it not go for LSMW (recording method) --> in this its very difficult to code.
    Thanks

  • Extract BOM based on Master Recipe status

    Greetings,
    I'm trying to extract the BOM for all our materials.  The problem is that it's not as easy as reading the tables MAST, STKO and STPO because I need to check in the master recipe (Task List) first what is the actual status by looking up the PLKO-STATU field equals to the value 4.
    Now, I have absolutely no idea how to link all theses tables together so I can capture the proper information.  Like I said, MAST, STKO and STPO is not an issue, it's to link this with PLKO, PLAS and PLPO (if necessary) that I'm wondering how.
    Any help would be greatly appreciated.  Thanks.
    Best regards,
    John

    Hi,
    Use should use function CS_BOM_EXPL_MAT_V2:
    CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
          EXPORTING  capid = 'SD01'
                     datuv = w_dtini
                     ehndl = '1'
                     mktls = 'X'
                     mehrs = ' '
                     mmory = '1'
                     EMENG = 1
                     rndkz = '1'
                     mtnrv = w_matnr
                     svwvo = 'X'
                     werks = 'BR01'
                     vrsvo = 'X'
    Best regards,
    Leandro Mengue

  • BAPI: Master Recipe creation

    Hi,
    Is there any BAPI available for
    - create/ chage "Master Recipe"?
    - "work center" creation?
    Best regards,
    Abir.

    Hi Mangesh,
    In the function module BAPI_ROUTING_CREATE, I'm not able to see the field for Superordinate Operation and Constrol Recipe Destination.
    Is there a separate BAPI to create Master Recipe?
    I also looked at the other message where somebody have mentioned to use, following BAPI to create Master Recipe's
    Business Object BUS1194 General Recipe
    Method SAVEREPLICAMULTIPLE Save PPE Objects for General recipe
    Message Type PPE_GREC Save PPE Objects for General recipe
    Basic Type PPE_GREC01 Save PPE Objects for General recipe
    But even this doesn't have the structure details to define Phases and Control Recipe destinations.
    Thanks,
    Mangesh

  • How we can disable access to BOM via the Display Master Recipe (C203)?

    Hi Gurus,
    How we can disable access to BOM via the Display Master Recipe (C203)?
    Thanks!

    Hi Mae Baraquio  
    Have you tried screen variant to make it as display mode.
    please refer below document for your reference.
    Learning SHD0 with Example
    if you find any query kindly revert back.
    Thanks & Regards
    Sandeep Kumar Praharaj

  • Creation of Process Order without assigning master recipe

    Hi,
    I want to create a process order without having default master recipe for the given material or default operation for the given order type. I want the user to select the master recipe manually in process order. We do not want to use production version also.
    We can define the default operation for the order type (OPJG) so that we can create a process order. I do not want a default operation in the process order but the user should select a valid master recipe. If we have default operation in the process order, it serves no purpose as it is never used anywhere.
    Is there any way we can achieve this?
    Regards,

    Hi,
    Please find the required details and conditions for creating process orders without master recipe.
    http://help.sap.com/saphelp_47x200/helpdata/en/89/a42cb3461e11d182b50000e829fbfe/frameset.htm
    Regards
    Kannan

  • CIF Master recipe get the message Invalid BOM

    Dear All,
    I am CIFing up the master recipe,  but problem is that the CIF keep telling me that I have an in-valid BoM (Message U9107) all the BoM item are APO relevant . MRP type X0 and So on
    Help please
    Cheers,
    Kittichai

    Hi Senthil,
    All the criteria you mention are there in my master recipe,
    1. BoM Status and all the Components, based Quantity are there
    2. Comonent item are with the flow ID (APO) 4, Put product in container at start of activities
    3 all materials have work scheduling screen
    I can get the operation and header material up to APO with no problem, but all the raw materials are not possible to go up, CIF keep reporting that I get the in-valid BOM
    Any thing that i missed. ( additional information, for the PP Bom and routing, i have no problem to do the CIF)
    Thanks,
    Kittichai

  • BOM/ Master Recipe

    Hi again experts,
    I changed a BOM of a material by accessing its production version then thru its recipe.  Now whenever i try to change the BOM using CS02, there's message "BOM can only be changed via Master Recipe" (warning message).  Then if i try to create an alternative BOM for the same item, there's an error message "BOM can only be extended via Master Recipe".  This prohibits the user to do so.  How can we bypass this?  Is it adviseable to just turn the message to warning message?  Thanks in advance!
    Keb

    Hi Prasobh,
    Thanks for the input. But...
    Is there anyway to revert the scenario back to original?  I mean, what if they unpurposely changed the BOM thru the recipe?  Does it mean we need to create new recipe and new bom for this material just so we can do normal changes with the BOM, or create?  Cause right now we cant create an alt bom for the material using CS01.  Thanks again!

  • Saving Master Recipe Creation C201 takes us to change C202

    We are trying to create multiple master recipes in a row using ECC5.0. Why does saving in c201 take you directly to the main c202 screen?

    Ken,
    I suggest you post the same in the ERP forums....
    Since there has been no reply for close to a month , I will close this as answered , please repost the same in the ERP forums and provide a link to the same...
    Arun

  • Master recipe not pickedup automatically

    Hi all,
           While creating process order the Master Recipe is not picked up in the master data tab....BOM and PV no are shown but not the Master Recipe...Is there any customization for picking up Mater Recipe automatically in process order....????
    Regards,
    Joseph.

    Dear
    Goto COR4-Select Order Type and plant-Double Click -Look at Master Recipe Selection set up -It should be set to Master Reciepe Selection ( Autmocatically ) not manually .
    Re-set this and check with a process order creation in COR1
    Regards
    JH

Maybe you are looking for

  • Opening multiple iphoto libraries

    Hi folks, due to huge amount of photos, I use multiple libraries in iPhoto. 1) Is there a way to have more libraries opened at a time? to shift photos and movies between... 2) default library is the one, which was last opened. I would preffer to have

  • Downloading and Installing SAPGUI for Mac OSX

    First of all I want to say, that this site has the most un-intuitive interface and complicated navigation system I have ever encountered.  Was it so difficult to create an easy to access download area for all the GUI's to be accessed and downloaded a

  • Who Column - What is best way to put value in who columns

    Hi, I have a custom concurrent program that is inserting values in a custom database table. Now I have to update that table to enter *'who columns'*. I have updated table but now get confused when I need to enter values in those 'who columns'. Now I

  • Exception for Job

    Hello, I created a job with dbms_scheduler.create_job which runs from Montday to Friday at 7:00 a.m. My question is: Is it possible to make an exception for this job, because I only want to run this job on normal workdays and not on holidays. Thanks

  • Web.xml clarification

    Hello, in a servlet we would like to read web.xml sections which are not accessible through the servlet/context-getParameter methods. So we wrote a utility to get access to these elements. The problem is, that we receive an error, if the parser has n