Regarding creation Of Help View
Hi , Can Any body Tell me what is the step by Step Procedure how to create the Help View. Plz it's urgent .
Thanks&Regards .
Nihar.
Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Reward points for useful Answers
Similar Messages
-
Hi Friends,
I am trying to create help view from se11.
It is taking me to a similar screen as in maintanace view. But after activating am not able to run it. can you please tel me the step by step procedure to create a help view and how it is used and how to exceute it.
Thanks
RamyaHi
->If the selection method for a search help is a database view, the input help displays only the records for which there are entries in all the tables involved in the view (inner join). The set of possible entries is sometimes described by the entries in a primary table for which additional optional information can be added from further secondary tables. This view on the data can be implemented with a help view. The same outer join logic is used for help views as for maintenance views.
->A help view is defined analogously to a maintenance view. Help views can only be used as selection methods in search helps. Since the R/3 System cannot pass the selection directly to the database using a help view, it must generate its own access routines. The database view should therefore be used as selection method in preference to the help view.
->Selection using a table and text table corresponds to selection using a virtual help view. For this reason, a virtual help view should not be created in this case. Exception: The table contains a field having the same name as a non-key field of the text table. If this field of the text table is needed in the search help, you have to create a help view on the two tables because the field in the search help cannot be accessed directly.
reward if usefull -
Creation of Database View , Projection View
Hi ABAP EXPERTS,
Can anyone plz send me the step by step creation of DATABASE and PROJECT VIEWS. Just steps by step explanation will do , screen shots will be more than appreciated.
Kind Regards,
Sunil Ranal.Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set. In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
Check this link for database view creation.
http://help.sap.com/saphelp_40b/helpdata/en/cf/21ed06446011d189700000e8322d00/content.htm
Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed. A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
Check this link for Projection view creation.
http://help.sap.com/saphelp_nw70/helpdata/en/cf/21ed20446011d189700000e8322d00/content.htm
Regards,
Maha -
Not able to view the content in Microsoft help viewer (MS VS 2012)
Hello Team,
I'm Rahul from Daimler-Chrysler, Bangalore location. I’m the IT Engineer for Daimler-Chrysler.
We tried many settings in IE but still not able to resolved. So i need more expert help.
My customer having one issue-
# User is not able to view the content in Microsoft help viewer (MS VS 2012), below is the error: Its opening in HTML Format.
So please help me. Contact no- +91-9972004298. and personal id:- [email protected]/[email protected]
I call you to Microsoft customer care they advice me to ASK Question. Please help me, I'm waiting for your reply.
Thanks,
Rahul B. Patil.
+919972004298.Hi Sri,
it looks that your HANA instance has been created before we enabled the web-based development workbench. Some privileges are missing, we can't migration those existing instances.
Nevertheless you can ignore the error above. You can see all the content inside your instance "smstest1".
If you want to get rid of the cosmetic issue. You might delete this instance and create a new one.
Best regards
Xu -
How to use Help View 2 in standalone Winform app similar to VS Package Help2 from DTE2
Hello,
We are successfully obtaining a DTE2 object and then the Help2 object to connect our context id names with triggering the Help Viewer 2 in a VS package but can’t seem to do the same outside of VS.
Here’s a sample of how we handle getting it okay from the VS package code:
dte2 = Package.GetGlobalService(typeof(DTE)) as DTE2;
help2 = (Help2) dte2.GetObject("Help2");
Then we can set out context id like this:
helpId = “MYFORMCONTEXTIDHERE”;
help2.DisplayTopicFromF1Keyword(helpId);
Within VS this works fine for our package. However, the winform app version can’t get the DTE2 object as no instance of VS is running. For instance, an example like this:
dte2 = (DTE2)System.Runtime.InteropServices.Marshal.GetActiveObject("VisualStudio.DTE.11.0");
won’t work as there’s no VS instance.
Given all this…and us not wanting to use the older CHM HelpProvider winforms approach, is there any way we can achieve what the package version is doing in a pure Winforms application?
Thanks,
MichaelHi Michael,
Thank you for posting in the MSDN forum.
Based on your description, I’m afraid that it is not the correct forum for this issue, since this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
To help you find more useful information or find the correct forum for this issue, would you mind letting us know more information about it?
It is the WinForm developing issue, am I right?
You said that you use the DTE 2 object, is it related to the VS extension?
>> However, the winform app version can’t get the DTE2 object as no instance of VS is running. For instance, an example like this:
dte2 = (DTE2)System.Runtime.InteropServices.Marshal.GetActiveObject("VisualStudio.DTE.11.0");
won’t work as there’s no VS instance.
I did some research about it, the following case and document shared some information about the “Get References to the DTE and DTE2 Objects”, it seems that it also shares some information about “Get an instance of the currently running
Visual Studio IDE” like the code here:
// Get an instance of the currently running Visual Studio IDE.
EnvDTE80.DTE2 dte2;
dte2 = (EnvDTE80.DTE2)System.Runtime.InteropServices.Marshal.
GetActiveObject("VisualStudio.DTE.11.0");
Reference:
http://msdn.microsoft.com/en-us/library/vstudio/68shb4dw(v=vs.110).aspx
Another case:
http://stackoverflow.com/questions/21986644/use-addin-project-in-another-application
If still no help, I might not have the correct detailed answer you need, but I might lead you into the right direction to solve your problem.
If it is the WinForm developing issue, you could select the correct forum here:
https://social.msdn.microsoft.com/Forums/windows/en-US/home?forum=winformsdesigner%2Cwinforms%2Cwinformsdatacontrols&filter=alltypes&sort=lastpostdesc
If it is related to the VS extension, maybe this forum would be better for you:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=vsx
If I have misunderstood this issue, please feel free to let me know, I will help you find the correct forum for this issue as soon as possible.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to create a help view for a customized error message
Hi all,
Can you guide me how to create a help view for a customized error message, we need to put some suggestions in it so that user can can resolve this issue with this guide. ( the short text is too short to describe all situations via TC:SE91)
Thanks very much!
Bruce, WenHi Bruce,
Could you brief your concerns again.
Why don't you maintain long text in message class for long description.
Regards,
Ranjith N -
Creation of Column view for Multiprovider failed
Dear Experts,
I'm facing an issue in TR import.
The TR failed with the below error message.
Creation of column view for XXXXX failed.
XXXXX - Multiprovider
System :BW on HANA (BW 7.4 SP06)
If there's a way to resolve this error, please let me know.
Appreciate your help.
Br, HarishHi,
Here's the workaround I have implemented for this issue.
Implemented the note 1955263 and made the below correction to the programSAP_RSADMIN_MAINTAIN.
Object = MPRO_CS_GEN_ERROR_IGNORE
Value = X
After the above customizations are done, TRs are imported without any issues.
For the OSS message I have raised, SAP has asked us to implement the note 2001969 to fix the issue.
Br, Harish -
Creation of Materialized view and Materialized view log.
I wanted to create materialized view with 'REFRESH FAST ON COMMIT' option.
1) Table1 --it is partitioned range + list -- Added primary key
2) view1 -- having primary keys on view's base table
Steps:
1) create materialized view log on Table1 ; -- default primary key
2) create materialized view log on view1. --- It is giving below error.
ORA-00942: table or view does not exist
i wanted to create Materialized view like below
create materialized view
REFRESH fast ON commit
as
select ...
... from table1
where c1 in (select c1 from view1 where ... );
Question:
1) As i am getting above error while creating MV log on view. Can we create MV log on view or we have to create MV log on view base table?
2) To create MV with ''REFRESH FAST ON COMMIT' option , do we need to have primary key on master tables?
Any pointers on this will really helpful.
Thanks
PrasadAlso created MV LOG on 3 tables and tried with joins ..
create materialized view
REFRESH fast ON commit
as
select ...
... from table1 , tab2 t2,tab3 t3
where ....
and ...
Get same error ORA-12052: cannot fast refresh materialized view AVSYS.EVENT_LOG_MV
2052. 00000 - "cannot fast refresh materialized view %s.%s"
*Cause: Either ROWIDs of certain tables were missing in the definition or
the inner table of an outer join did not have UNIQUE constraints on
join columns.
*Action: Specify the FORCE or COMPLETE option. If this error is got
during creation, the materialized view definition may have be
changed. Refer to the documentation on materialized views. -
Hi All,
We had created some other materialized view with for small set of data. The materialized view name is ‘XXCA_PAGL_RECON_GL1_TRANS_MV’ and it has created a table with the same name.
What I am unable to understand is that the new table which was created by the system during the creation of materialized view is in VALID state but the materialized view is in INVALID state.
Please help me to understand this process.
Thanks in advance
VenkateshThe column dba_objects.status for mviews is set to INVALID when the base tables are updated. See Metalink note 454552.1. It is normal.
Edited by: YasinBaskan on Feb 17, 2009 2:07 PM -
Regarding creation of node element
Hi
i hav a doubt regarding creation of node element. u can create new node element using method create(cn)Element available either directly from wdContext or from wdContext.node(cn) where cn is any context node.
can any one plz explain me what's the difference between two.
does it has any thing to with node being singelton or non-singelton?
also can anyone explain me the difference between add and bind method.
thanks.hi
good
Data Binding Methods
If a property can, or must be bound to the context, the respective bind and bound methods are available.
● The bind methods bind the value of a property to the context element specified by the path.
The name of the method is created according to the following pattern:
BIND_<runtime name of the property>.
Example: table, property: design, method: BIND_DESIGN.
● The bound methods return the path of the context element to which a property is bound and return NULL if no binding exists.
The name of the method is created according to the following pattern:
BOUND_<runtime name of the property>.
Example: table, property: design, method: BOUND_DESIGN.
ADD METHOD->
Two add methods that add an element.
○ If only the element is transferred as parameter, then the element is added at the and of a list
○ If an index is transferred as well, then this element is transferred at the specified index position.
http://help.sap.com/saphelp_erp2005/helpdata/en/66/18b44145143831e10000000a155106/content.htm
thanks
mrutyun^ -
Help view to get two table entries in search help
Hi,
I have created the help view for join two tables and that help view was called in the selection method for creating search help of the custom table field. since it has show inthe selection screen , it is fetching only one table entries. and the shown entries are displaying but not passing.
Please provide the steps to get the two table entries and the displayed entries should pass.
Thanks in Advance,
sivaHi sivanag,
1. Try your view with SE16/SE16N to see if it really finds what you expect
2. Use the same data elements in help view as on selection screen
3. read documentation and F1 help on all fields you see in the search help definition - especially only field marked as EXPORT parameter will be put back on screen.
But, sincerely, I don't know what your selection-screen looks like.
Regards,
Clemens -
RE: Regarding : Creation of child nodes in a outlinefield
Hi, Balasubramaniam:
Try to set the isFolder attribute of your parent display node to TRUE.
This may solve your problem. Also, check isFilled attribute of display
node, you might find the answer.
Hope this helps.
Tien Wang
Indus Consultancy Services
http://www.indcon.com
Phone 201.261.3100 x233
Fax 201.261.1399
E-mail : [email protected]
-----Original Message-----
From: owner-forte-users [SMTP:[email protected]]
Sent: Friday, October 03, 1997 5:32 PM
To: '[email protected]'
Subject: Regarding : Creation of child nodes in a outline field
Hi,
I am facing a few problems in creating a child node. I read elements =
from an array to populate the outline field. The array has exact =
definitions as to what should be a parent and child respectively. While =
I am able to create nodes at the parent level, I am unable to create =
child nodes for any parent. I discovered that the value for the parent =
node is getting lost. I have tried to use some of the methods to arrive
=
at the parent node, but to no anvil. Could some one suggest how exactly =
to get the value of the parent node so that the child node can be =
assigned to the parent.
Thanks In advance.
Balasubramaniam Sures
[email protected]
P.S : I have seen the examples Simple Outline field and File Browser. No
=
clues from here.I take it that you are traversing through the array and loading each
element into the OutlineField. At the risk of stating the obvious, for
each element you must also identify it's parent. This is necessary to
set the relationship from the child to the parent or vise versa.
If you are already doing this and are still having difficulty, the
problem may be as simple as setting the IsFolder property of the parent
node. Unless this is done, it's child nodes will not be visible.
Van Vuong
Lead Technical Analyst
Office: 972.985.5289
VoiceNow: 972.330.0822
Internet: [email protected]
PAGE NET
From: bala[SMTP:[email protected]]
Sent: Friday, October 03, 1997 12:32 PM
To: '[email protected]'
Subject: Regarding : Creation of child nodes in a outline field
Hi,
I am facing a few problems in creating a child node. I read elements from an
array to populate the outline field. The array has exact definitions as to
what should be a parent and child respectively. While I am able to create
nodes at the parent level, I am unable to create child nodes for any parent.
I discovered that the value for the parent node is getting lost. I have
tried to use some of the methods to arrive at the parent node, but to no
anvil. Could some one suggest how exactly to get the value of the parent node
so that the child node can be assigned to the parent.
Thanks In advance.
Balasubramaniam Sures
[email protected]
P.S : I have seen the examples Simple Outline field and File Browser. No
clues from here. -
Using Excel 2008 for a Mac on my laptop
Part of toolbar has disappeared (windows, help, view, etc) --- want to restore
Need to freeze column headings but freezing option was not working prior to disappearance of tool barHi Alveretta,
Thanks for posting in MSDN forum.
This forum is for developers discussing developing issues on Windows platform. I suggest to get more effective response from
Office for mac forum.
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or
learn from your interaction with us.
Thanks for your understanding.
Best regards
Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Diff bt Help view and Maintanence view
hi gem's
i need the diff bt Help view and Maintanence view with example...............Hi
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
- Projection View
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
Please have a look at below link. It will help you.
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ed06446011d189700000e8322d00/frameset.htm
for more detailed info look on:
http://www.sap-img.com/abap/what-is-the-different-types-and-usage-of-views.htm
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/abap+dictionary&
1.Go to se11
2. select view radiobutton and give a name
3. Create
4. select type of view you want to create. Such as database view.
5. give short description
6. give a table name such as mara
7. press the pushbutton relationship. here you will find all the tables which are allowed to create view with mara.
8. select one or mane tables.
8 copy
9.save , check and activate.
Regards
Anji -
How to use 'help view'uFF1FHELP
Dear guys:
I want to use 'help view' to connect tables with 'OUTER JOIN'. For example:With primary table 'SPFLI' and secondary 'SCARR',with each has different airline code of 10 and 18. I want show all the 18 airlines even if they do not have any flight numbers. I have tried several times but it also use 'INNER JOIN' to connect each otherHi,
You should use the 'Search help exit' to select the data for yourself from the database. Go into the search help maintenance screen and press F1 on field 'search help exit'; follow the links. There is actually a pretty good documentation.
Regards, Gerd Rother
Maybe you are looking for
-
Since two days, my screens don't fit anymore on my iPhone4. I can scroll (only a millimeter or two) up and down and left to right, even on the home screen! It bothers me, because I have no clue how it happened. I shut down my phone and restarted it a
-
My ipod wont play music solely through ear phones it will only play through the main speaker and the earphones together. Is this able to be fixed??
-
Alternative for STRING_CENTER function module
Hi, Can any one give me the Alternative for STRING_CENTER function module. it is there in 4.7 when i am using the same in ecc 6.0 it is giving as absolute statement . Please give the solution for this.
-
Changing Time Zone programmatically
Hi I have a website using applets, i have the websphere in USA, and some clients are in Europe, I have some issues with date, I want to change the time zone in applet, to make it run under America/New_York timezone, so in init section of applet, i ad
-
Is it possible to install WebAgent on Linux iAS??
I was trying to install the web agent on a Linux IAS server and then I noticed that the apache server must be recompiled in order to install the WebAgent. But the version of Apache released with IAS does not come with the required sources. Has anybod