Regarding creation of inspection lot origin-03
Dear all,
The standard behaviour of inspection type 03 is When production order is released inspection lot is created.Client requirement is when particular operation is confirmed only inspection lot to be generated.Is it possible?
For example in routing there are 7 operations and in the sixth operation is Quality audit opeation
inspection lot is created when production order is released, lot is generated but the requirement is when fifth operation is confirmed only lot to be generated.
with regards
kumar
Hi Senthil Kumar,
AS per best of my information concern your issue can't get resolved with inspection type 03. But yest at time of confirming the Fifth operation you can get the 04 inspection lot triggered by calling the auto GR at this operation confirm by setting the control key at these operation. and these 04 lot can be triggered more than one time for an order.
Regards,
Shyamal
Similar Messages
-
Creation of Inspection Lot in QM Module without inspection lot origin
I want a solution regarding creation of inspection lot without assigning inspection lot origin to material code.
We have developed function which creates inspection lot for the material against which PDI is envisaged on the material of a particular Purchase order. In my view we do not require assigning inspection lot origin on the material code as process has been mapped through Qinfo record. By assigning the inspection lot origin on the material is unnecessary step in our process.
Can any body suggest solution regarding above problem.
Yatindra BahugunaDear,
We have developed function which creates inspection lot for the material against which PDI is envisaged on the material of a particular Purchase order.
Little bit stuck up.... can you explain the above in detail...
As I understood you developed a function -
- Which creates material inspection lot
- Which Pre Delivery Inspection applicable on particular purchase order.
YES?
Regards,
Syed Hussain. -
Creating new inspection lot origin via SPRO
Hi guys.
I would like to know how to create new inspection lot origin via SPRO.
I tried going via SPRO->Quality Management->Quality Inspection->Inspection Lot Creation->Maintain Inspection Lot Origins and Assign Inspection types , but could not find the way.
Thanks in advance.Hi,
You should 1st create/define the inspection types in OQL1 for your needs then you should assign them to locations.
Have you defined your inspection types?
Check n revert
Shiva -
BAPI for Creation of inspection lot
I have two scenario:-
1.Can any body help to find BAPI for creation of Inspection lot for the material under PO envisaged for PDI.
2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
My objective is to creation inspection lot without assigning Inspection type of Z01SI01 or Z01SI02 and so on in the material code under a respective Plant 1004 or 1005 0r 1006 so on.
In my Z Development for creation of inspection lot BDC is run for QA01 as this code created inspection lot on when material code has inspection type Z01SI01 i.e. location of source inspection and vendr code particular classification under 010 vendor class inspection type Z01SI01. System search both the inspection type for both material and vendor then create inspection lot in QALS table by assiging inspection matching inspection on the lot.
I want to get rid of assignment of inspection on the materilal. If any BAPI or FM is avalable for creation of inspection without assigning inspection type on material code. I want to create inspection lot in which Inpsection type assignment can be done based on vendor class only.
YPB2. Can any body find me a BAPI or FM which can creates inspection lot in QALS table without inspection lot origin under 01 i.e. 0101 or Z01SI01.
I am very sure that this is not possible.You can not create inspection lot without inspection lot origin or inspection type.
Regards
Sujit -
Creation of inspection lot 04 depending on production version
Hi Experts,
could you tell me if it is possible to create a Good Receipt inspection (lot origin 04) depending on the production version used ?
My material has 2 production versions:
0001 - production with process order
0002 - production with repetitve manufacturing
When I do a GR on process order, I do not want to create an inspection lot 04.
When I do a GR on product cost collector, I want to create an inspection lot 04.
As I have entered inspection types in material master data, I do not know how to do the distinction ?
Thanks in advance for your help
Best regards
AmauryHi
Check user exit
QBCK0003 |Extended QM check for goods receipt
Regards
Sujit -
Restrict creation of inspection lot for certain work centers
Hi
My client needs to restrict the creation of inspection lot at certain work centers although QM is active for all material processed in these work centers.
I am using the function module 'EXIT_SAPLQAAT_002' of QAAT0001 for this purpose. Z04 inspection type ( with Post to insp stock) is maintained for all these material.
A different Z table is there , where material-work center combination is maintained for which no inspection lot is required.
Logic provided so that system searches Material-Work center from production order then compares it with the Material-Work center combination with the maintained Z Table.If both found same then no inspection lot will be generated.
But an error message (Change the inspection stock of material XXXXXX in QM only) appears for all those material while doing confirmation in CO11N . Hence system does not allow to complete confirmation for those material where QM is active.
Please suggest if i am using the correct Exit or any further improvement is required.
Thanks and regards
D MohantyHi
Actually the issue is resolved now.The problem was with coding where we were using Table-AFRU for reading prod order details.But AFRU does not consider fresh orders for which it was replaced with AFKO.
Also the Z table must be maintained as Plant-Material-Work center combination prior to go for any order confirmation.
Thank you all who have gone through the post , hope this will help those who have to map the same scenario at their end.
Regards
D Mohanty -
Stop Automatic Creation of Inspection Lot for a condition
Dear Gurus,
While Creating a Delivery through a Sales Order, Config is maintained such that "Inspection Lot" will be automatically Generated.
Now Business wants to Stop this Automatic Creation of Inspection Lot only for a Particular Delivery Type and for a particular mode of Transport.
Do we have any User Exits / BADIs to achieve this requirement.
Please let us know.
Thanks in advance.
Regards,
Vinay MuttHi
To meet you above mentioned requirement you have to modify the program RQAAAS10 as per your logic both to create lot for Expired Material and to consider project stock or vendor stock as In standard SAP these stock are not considered.
regards
Manish -
Re: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
Reference discussion: Changing Inspection lot origin from 08 to 05 for movement type 322 and 349
With reference to the above discussion and your explanation for user EXIT QAAAT0001, it was stated that:
If you only have two inspection types, you can mark one as preferred. Then with exit use logic that if MM = 311 use preferred inspection type, if 911 use, non-preferred inspection type.
May I ask what are you refer to for MM? It seems like movement type to me, however, I can't find movement type field in the structure within the component of EXIT_SAPLQAAT_002. Appreciate if you could shed some light on this.
Best Regards,
CY
Branched from older discussion by moderator. When there are questions concerning an older discussion, please create a new discussion with reference to the older one. Thanks!Yes.. you are correct. But with the info that is provided by EXIT_SAPLQAAT_002, you should be able to identify the proper material document in table MSEG which will have the material movement.
You can use the values of plant, batch, material number, Purchase order number, Order number, item number, storage location as well as the current date since the exit would normally be executed on the same date the material movement was done. You'd also probably only execute the logic if QKZ is "X".
Craig -
PR Creation at Inspection lot creation
Dear QM Experts
can we generate Purchase requisition with the creation of Inspection lot, Automatically.
in my case there are some inspection operation performed by external agency for which he charge some amount for services.
for this i created a control key of external services and assign this in the inspection plan in a separate operation and enter all the required data like cost element, vendor, Purchasing oganization and material group but when i created the inspection lot , PR is not generated,
should this requirement be cater by SAP?
RegardsHi,
Why do not you try here Source inspection.
During crsation of purchase order lot will get generated .you can inspect material before its coming to your place..
You have to activate 0101 inspection type active.
Qinfo record you have activate source inspection.
Even in procurrement key in custamizing you can have option if material get rejected.
Once purchase order created to create lot you have run transaction QI07.where you can click on create lot.after saving this transaction you can get lot..Then you record result as per toyr requirement like from external services.
Regards
SANIL -
Inspection lot origin don't work in COA
Hello All,
I have created a COA Profile (QC01), Where in I have assign inspection type 89 in the field "Insp.lot origin" and "Inspection Type". Now as per the F1 help suggest I am expecting that system will not allow me to print COA for those lots don't belongs to inspection type 89, but surprisingly it allows to take print out for inspection lot origins for 01, 08 types also.
I am using the STD COA form "QM_QCERT_01"
Taking print from QC21
Pls let me know what and/or where I am missing something!!!!!!!
Regards,
SAPierDear,
SPRO > QM > Quality Certificates > Certificate Profile > Define Certificate Types
SPRO > QM > Quality Certificates > Output Determination > Define Condition Types for Output Determination
Standard is Form QM_QCERT_01 you will get it in SE71.
Logistics > Quality Management > Quality Certificate > Outgoing > Certificate Profile (QC01
COA is printed in QC20.
Also refer this nice article by Expert Gajesh,
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/9002247f-4b7f-2c10-10ac-c6fe29807331?quicklink=index&overridelayout=true
Hope it will help you.
Regards,
R.Brahmankar -
Connection between Inspection lot Origin & UD code
Hi Friends
This is a QM issue .
When We maintain UD code in SPRO Quality Management --Maintain Catalogs it is generally for combination of plant & the code
But a code which I had maintained for a Plant is not appearing for Inspection lot origin 89 (AD-Hoc)
Is there a connection between Inspection Lot Origin & UD code ??
Thanks
ArindamDear,
To get the UD code folow the steps as below
QS41 - Edit - create catalog group and code (catalog type = 3)
QS51 - Edit - Create selected set - here we are linking plant and catalog group/code created above
Here give the valuation correctly with follow-up action
In SPRO - Quality Management>Quality Planning>Quality Inspection>Inspection Lot Creation>Maintain Inspection Types
for a insp type for which you want the above code to be appeared, in the Inspection lot processing UD selected set file give the above selected set group, so that the selected set group will appear when you go for UD
Coem back if required -
Movement types and inspection lot origin??
Hello Friends
I can have a look in Movement type & can find it's inspection lot origin but i want to know for particular inspection lot origin what all movement types are assigned?
Regards
Prashant GuptaHi;
The most truely answer is,
till 4.5B, active table is: T156S
beginning from 4.6A, active table is: T156SY
for stock related transactions, it's decided in fm: MB_CONTROL_MOVETYPE_GET
beginning of row 151.
There is also an enhancement. -
Manual Inspection Lot for Inspection Lot Origin '04'
Dear SAPians,
We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material for the Specified Origin. I feel that there is some customizing issue. Please suggest.
ThanksYes Atul,
The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
The system will ask you for the Order number.
NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
Regards,
Shyamal -
Automatic Inspection lot not generated for Inspection lot origin 12
Hi all,
I am not able to trigger the automatic Inspection lot for General Delivery i.e Inspection lot origin 12.
The scenario is, I am creating the STO ( Inter company stock transfer) and against the same STO i am creating the delivery but after delivery inspection lot is not generated. In the material master correct inspection type is maintained also the mvt type 641 is active for QM. The inspection lot origin is assigned to the delivery type in the configuration but still i am not able to generate the inspection lot.
Please let me know i am missing something?
RegardsHi,
You are missing 1 Config
Quality Management
Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Inspection at Shipping (Tcode OQL8)
mantain inspection origen agenist Delivery type u are using.
also you need to create Sales Info record(QV51)
I hope all other settings are OK then it should work
Edited by: Jayashankardm on Jan 6, 2010 9:59 PM -
Scenarios for "manual creation of inspection lot"
Hi QM gurus!!
I would just like to ask the main function of QA01 or "<b>Manual creation of inspection lot</b>"
What are the cases/scenarios where this tcode is used? I would really appreciate if you could help me.. Thank you.
Regards,
Heinrick PaladHI,
The table below provides a brief overview of the functions you can use to process inspection lots. Appropriate cross references are included for the more extensive tasks or for those for which additional information is available.
Prerequisites
The inspection lot processing functions can be linked to various authorizations that are checked by the system whenever you try to process an inspection lot. The following types authorizations are relevant to inspection lot processing:
Material authorizations
The material authorization for QM is stored in the material master. For more information, see Creating and Changing QM-Specific Data for a Material.
Inspection type authorizations
This authorization controls which inspection type the user can access in order to create an inspection lot. The inspection type authorization is plant-specific.
No authorization checks are executed in QM when an inspection lot is created automatically.
Features
Function
Pushbutton / Menu path
What you should know
Accessing the initial screen for the inspection lot processing functions
Logistics ® Quality management ® Quality inspection ® Inspection lot processing ® Inspection lot
Creating an inspection lot manually
See Creating an Inspection Lot Manually
Changing an inspection lot
Choose Change
Enter the number of the inspection lot you want to change and then choose Enter.
Displaying an inspection lot
Choose Display
Enter the number of the inspection lot you want to display and then choose Enter.
Creating a new batch in an inspection lot
See Batch Creation in Inspection Lots
Cancelling an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Cancel lot.
See Cancellation of an Inspection Lot
Blocking/unblocking an inspection lot
Call up an inspection lot in the change mode and choose Inspection lot ® Functions ® Block lot.
To unblock an inspection lot, choose Inspection lot ® Functions ® Unblock lot.
When you block an inspection lot, you cannot process the lot further. You must unblock the lot if you want to perform any additional operations.
Transferring stock in an inspection lot
See Stock Transfers
Making corrections to inspection lot quantities
See Corrections to Inspection Lot Quantities
Creating a QM order
Call up an inspection lot in the create or change mode and choose Goto ® Insp. lot acc. assgnmt.
See QM Order Creation
Resetting the sample calculation
See Resetting the Sample Calculation
Printing inspection instruction/sample-drawing instruction
See Printout of Instructions
Approving a task list
Call up an inspection lot in the create or change mode and choose Inspection lot ® Functions ® Give approval
If the task lists in your company must be approved before they can be used, you should make sure that only approved task lists are assigned to an inspection lot. If the system selects a task list that has not yet been approved, you can use this function to approve the task list (provided you have the necessary material authorization).
this link help u.
http://help.sap.com/saphelp_erp2004/helpdata/EN/be/00bbe7ca5311d2961800a0c930e04c/frameset.htm
reward is usefull.
tahnks.
Maybe you are looking for
-
Bridge doesn't load files to layers in Photoshop
I recently uninstalled Photoshop CC 2014 and loaded Bridge CC 14.0 because of a known bug that ca uses focus stacking to not work in Photoshop CC 2014. Now Bridge doesn't recognize Photoshop. Adobe help told me to update my Photoshop, but that would
-
Problem with "Package Spec" please help.
Hello once again. I'm developing a master-detail form, so I'm using a "Package Spec" variable to hold the primary key value from the master form. The primary key value for the master is generated by a sequence. Here's the package spec: PACKAGE primar
-
OK - Here's my problem. Just moving from AS2 to AS3 and trying to create a drag and drop template. I need to re-use a single drag selection multiple times, to multiple targets and then graded. For example, say I was building a car by dragging parts o
-
Hi If a invoice/cr memo has been posed using MIRO. Is it possible to change this document? If So how do I do so? Thanks
-
We have been successfully using Windows Services for Unix on a 2003 domain for passwd and group maps. I prep'd the domain to allow a 2012 R2 server to be added and then added the IdMU role/feature on this new 2012R2 DC. Now the passwd map is still OK