Regarding Creation of Product group

Hi SAP Guru,
I am being Unable to create a product group at new , although I have done it and run at other client.Also Please let me know the Views to select. As per My knowledge I have selected only 05 views , basic, MRP-1,2,3,4.... Need not to select the accounting and costing views. System says error message that u dont have requireed field parameter.Although I am able to create the same through MMZ1
Regards
Bhupendra Singh
Edited by: Bhupendrasingh on Jan 29, 2012 7:17 AM

Bhupendrasingh wrote:
> I am getting the following error
> " E MG 144 The field profit Ceneter is defined as the required field It doest not carry any enntry in MARC-PRCTR
Hi,Just check in OMSR, The 'Field sel. group' for MARC-PRCTR get the Field sel. group(default is 48), In OMS9 check for MM01, MM02, ROH ,FERT, this field is mandatory, if it is mandatory then you have to maintain the profit center, you can try with making it optional, but this field is made mandatory with some purpose so better to ask your FI for proper profit center for raw material & maintain it in either costing view or Plant data storage 2 view & then proceed further.

Similar Messages

Error during Creation of Product Group

Hi experts
I am getting below error during creation of Product Group MC84,
how to solve this
The field is defined as a required field; it does not contain an entry
Message no. MG144
Procedure
Transfer a suitable value.
If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization. Contact your system administrator.
Note
For information on locking and unlocking material master records, see the SAP library documentation Material Master (LO-MD-MM) ->Locking Material Master Records.

Hi,
Please refer the below thread,
PRODUCT GROUP
Regards,
Senthilkumar

Creation of product group

hi
i am creating product group using transaction code mc84
while creating product group it gives error as "The field is defined as a required field; it does not contain an entry"
I have entered
Product group   PP_TEST             PP test
Plant           1001
Base Unit       KG
selected materials as members
will anyone tell me where i m going wrong?
Prashant

Hi,
You might have marked some field as mandatory . And as in product group creation we have limited view so that error might be occuring .
Check what field you have marked as mandatory in t code OMS9 and OMSR
Regards,
Vishal

Error while creating a product group--Batch input error 9

Hi,
While creating a product group in T-code MC84, getting the error message" Product group can not be created (Batch input error 9)". Would appreciate providing yr help to resolve above issue.
Thks,
Nilesh

Hi Neel,
As ponited by you, the material type "PROD" is realted with creation of product group.I am able to resolve the error, "actually the work schedulling & MRP views were not activated for "PROD" resulting in the above error.
Thks for yr help.
Regards,
Nilesh

How to map Product Group for the Materials in BW.

Hi All,
We have an requirement for one of the report called as Progress validation Report.
We have to craete thsi repotr which would pulll out Inventory value, Production Plan value, Total Lates, Current week deliveries and WIP for a quarter.
Cube whihc provides details about production plan has data by Material, plant and product group wise.
But rest of the cube from which we extract the key figures does not have data by Product grop wise.
Product group is been picked from PGMI table in R/3.
How I can related the materials which are in other cube to the respective Product group.
Material and the relevant prdoct group data doesnot flows in BW.
There is even a scenario where ahve seen a material falls under 2 product groups..
PLease guide as how i can realted already existing materials in the Cube to the product group.
Points will be assigned
Thanks & Regards
Vaishali Patil

Hi,
Product Group is master data for material master. It is part of Matreial Clssification data in R/3.
Please check if you are having the same already loaded as attribute of Material master. I guess it will be there, if it s not there then you should try to load the same in material master object which you are using in all the cubes.
If the maintinenece in master data is nopt possible then you got to populate the same in cube.
There will be a combination of keys (materail/plant/prduct family etc.. ( for which Product group will be unique). then load product with the help of these key combinations in all the cubes via update routine.
There is one more way to have this but which is performance intensive.
You may create one master data object called Product Group and keep material number as attribute (with compunding all other key fileds to get the unique combination). Then you may create an infoset using cubes and this master data object. Join the materail numbers in all. Display this object in report.
I hope it will help.
Thanks,
S

Regarding Product group Creation

Dear SAP Guru
I am facing issues while creating Product group by the code MC*$.The error is "The field is defined as a required field; it does not contain an entry
Message no. MG144 ".Also while cretaing through the material tyoe prod, i am facing error of getting the Profit center
Regards
Edited by: Bhupendrasingh on Mar 7, 2012 9:19 AM
Edited by: Bhupendrasingh on Mar 7, 2012 9:27 AM

Hi Bhupendra,
Please see the below link, may be it help you out.
Getting Error Message on the MC84 transaction code MG144
PRODUCT GROUP
Thanks,
Mohit

Entering Product Group / Category at the Lead Creation Stage

Hi
Our Client requires to capture the Product Group / Category at the Lead Creation Level.
At the lead creation level the sales engineer is not exactly aware of the product pricely which the customer wants to buy but knew which Product Group / Category the customer is interested in. So is there any way to capture the Product Group / Product Category at the Lead Creation Level.
Regards
Punit Kapoor

1. Use TCode 0VVW for creating a Z Item Usage, say, ZPO1
2. Do an item Cat determination in VOV4, as
Sales Doc type
Item Cat Group
Usage
Item Category
OR -
NORM -
ZPO1 -
TAB
3. Maintain Customer Materials Info Record by using VD51.
In item screen for Cust-Mat combination maintain Item usage
Regards
JP

Product group creation error

Hi Guys,
While creating product group i am getting the following error can any one help me out to resolve the same
The error
Required parameters missing when calling up module
Message no. M3749
Thanks and regards
Thamizhchelvan G

Dear Thamizhchelvan,
I think you must be working in ECC 5.0 or ECC 6.0 version.
If so means first create a material say test using material type PROD - Product group in T Code MM01
and then assign the members in MC85/MC86 for the product group.
check this link
product group
This will solve your problem.
Regards
Mangalraj.S

ERROR WHILE PRODUCT GROUP CREATION

Dear All,
I am trying to creat the product Group but system is giving the
following error.
Message No.M3749
"Required parameters missing when calling up module".
Please give your valuable input to overcome the issue.
Thanks & Regards,
Vijay Mankar
+91 9871251289

Dear Ramanujan,
I have create Product Group lots of time without crate a material with PROD material type in IDES,and also I have checked it on other client DEV server its creating properly,and one thing ,if I entered Product Group & did not saved and again try to create it again ,it gives error that the Product group is already exists. Why it is happened?
But why it is not allowing me to create at my end.
Please give your valuable inputs for the same.
Vijay Mankar

Error in Product group creation

HI,
When I am creating product group at that time i m getting error like "Required parameters missing when calling up module"
Can anybody tell me solution..?
Product grp i m creating for SOP.

Dear Chetan,
Create a material using T code MM01,using the material type as PROD and then assign a plan for this product group in MC81.
Check this link,
Product group error
Regards
Mangalraj.S
Edited by: Mangalraj.S on Aug 20, 2009 3:18 PM

Automatic Product Group Creation.

I'm wondering if I can create Product Groups automatically. My problem is that I have 110 Product groups in Excel and they are assigned to 2500 materials. Now I want to move to have those product groups in SAP. Creating "PROD" material and then assigning them in MC86 is painfull.
Is it possible to do it with LSMW or someting like that? If yes please provide step by step tutorial.
Thanks

sure it is possible with LSMW, is there anything that cannot be loaded with LSMW?
LSMW is well documented:
http://help.sap.com/saphelp_nw70/helpdata/en/4d/455035082e2271e10000009b38f889/frameset.htm

Creation of production order with reference to sales order

dear all guru's,
i m having a requirement of creating production order with ref to sales order but without changing my old strategy of make to stock.
regards
ujwal

Hi,
For the purpose of creation of production order with reference to sales order while maintaing MTS strategy you need to maintain Make to stock strategy 40 in strategy group in MRP-3 View of Material Master.
This is the only Make-to-Stock Strategy which enables you create Production Order against both Sales order as well as Demand / PIR.
So if your strategy group is already 40 then you need not change it.
However if you are using any other Make-to - Stock strategy like 10, 11 etc. then it is not possible to create Production Order against Sales Order since they dont consider Sales Order in planning.So you need to change them and set strategy group as 40.
Hope this helps.
Revert if you have any doubt.
Regards,
Tejas
Edited by: Tejas Pujara on Sep 27, 2008 8:50 AM

AIA comms O2C PIP 11.2: Is creation of subscription group supported ?

HI AIA gurus
I am confused from documentation and source code of AIA comms O2C PIP 11.2. From documentation, it seems like Creation of Service group along with creation of services during order fulfillment. But, in the transformations for making input flistfor opcodes PCM_OP_CUST_MODIFY_CUSTOMER or PCM_OP_PURCHASE_SUBSCRIPTION_DEAL in composite ProcessFulfillmentOrderBillingBRMCommsAddSubProces do not have Field SUBSCRIPTION_OBJ field which indicates the Subscription parent of all services.
So, it is not clear if subscription group is supported in AIA comms O2C PIP 11.2. From research i found that AIA 2.0.1 did not support subscription groups. So, i am not sure if 11.2 or 11.3 PIPS support this feature.
Please help me to know if subscription group is supported or not. If supported, please help with Product configurations we need to do in Siebel to test subscription group creation.
Regards
Arun

Hi,
No, te AIAConfigurationProperties originally did not contain any section (nor Module Config or Service Config) describing AIA Session Pool Manager. how is it that the 11.2 documentation does not mention this composite as part of the "Verify Deployment" sections for both Comms AABC and O2C PIPs?
As a workaround we've currently took the composite project from $AIA_HOME/utilities/SessionPoolManager/V1/AIASessionPoolManager......, deployed it and also changed the AIAConfigurationProperties files by adding the Module config section for SessionPoolManager. That seemed to work after running the ant script for the update of the xml file and restarted the managed server.
Still curious as to why it was not deployed as part of the install.

How to Enhance search help for product groups. Currently no ability to add multiple lines from result list

Hi All,
In CRM Web UI, there is no multi selection option for product group id f4 help for Custmer event creation or edit screen under “Product” tab=> Product Group ID field.
Web UI Component Details -
UI component : TPMOE
View : TPMOE/ProductEOL
Context: PRODUCT Attribute : -PRODUCT_GRUOP
Click on Product Group ID field then below F4 Help screen appears.
In the product group results list, user can select only one row and Then all the product will be queried for selected product group, transferred to product list tab.
Current technical design for Product Group F4:
a) SE11 Data Dictionary search help “CRM_MKTPL_PGRP1” is used and data is fetched displayed based it( Refer method GET_V_PRODUCT_GROUP of context node class CL_TPMOE_PRODUCTEOL_CN00)
b) In UI, F4 pop up is handled by UI Framework in SAP generic manner so no multi selection is allowed.
c) A round trip event is triggered after selection of row from results which reload view with queried product result based group selected.
Requirement :-
In the product group F4 results list View, user should be able to select multiple row .As SAP GUI has the option of multiple entry selection from search help window with the help of field called MULTISEL.
System should query for products with all selected product group, transferred to product list tab.
Note: - The multi select options works fine for GUI, but for UI standard SAP code ignores this or never is this structure taken into consideration. Standard class to display F4 help on UI is CL_THTMLB_F4HELP.
Can we enforce same behavior like DDIC search help in Web UI too Or suggest how we can achieve this requirement?
Thanks in advance
Regards,
Arjun

Hello All,
We have achieved this requirement by Custom development and approach followed as -
Define UI object model zprgrp & zprgrpquery and object relationship in table ZCRM_OBJTAB
Query Strcuture : ZCRMST_PRGRP_SEARCH & Result List structure : ZCRMST_PRGRP_RESULT
Created Custom component : ZPRGRP with Search /Result view and with GENIL Class, search logic
Defined custom ComponentUsage “ProductGroup1SearchHelp” for ZPRGRP in Standard Component TPMOE
e. Called F4 application for field product _group with help component usage created in step d.
Regards,
Arjun

How do we Prevent Creation of Production Orders for Phantom materials.

Dear Experts;
We have some materials which are Phantoms.
We have set "special procurement type" as 50 in MRP2 and "Strategy Group" as 59 in MRP3
These are non stchable items, but have BOMS.
We dont create orders for them, however at the mement the system allows order creation. How do we prevent creation of production orders for these items in the system.
Thanks in Advance
Richard.

Dear Richard,
Check using this BADI - WORKORDER_UPDATE using method IN_UPDATE or Release by including a check if MATNR and for
WERKS combination if SOBSL = 50 from table MARC,then do not allow to save.
Check whether this works or else you have to set a plant specific status using OMS4 for not allowing production order
creation and assign this value in the material master of the phantom assemblies.
Check and revert
Regards
Mangalraj.S

Regarding Creation of Product group

Similar Messages

Maybe you are looking for