Regarding Creation of Views and Multiple Datasources.

Dear All,
I hv a COreport(Cost Center Report).the data is coming from tables of CO,FI,SD,MM.
The Tables from CO are COEP,COSP,COSS,CSKS,CRHD,CSKU,CRCO,CSKB
The tables from SD are VBRK,KNA1
The Tables from MM are EKKO,LFA1.
The table from FI are SKAT,BKPF,BSIK,BSAK.
1)Can i create a view for these tables?Can a view be called a DS.
2)With these tables i hv Multiple DS's.So can i use Multiple DS's to extract data
3)Can i use FM to extract Data?If i use FM,vll i face errors during Support?
4)Please Guide me how to create Views for these tables and How to handle Multiple Datasources.
Thanks

Noor,
Have you checked suitable business content datasources.
I think you have lot of options
FIrst You need to have a multiple data source
--> Check for suitable business content datasources
--> check whether these details are already available in BW through any means (through other standard datasources to ODS)
--> Create customized extractor finally as a last option
All these tables are atandard and nost probably you would find a standard datasource ( again multiple) I am sure for costing you have standard
Few or more standard datasources or already existing BW objexts with 1 or 2(rarely) customized extractor would do the purpose that you look for,....
Good Luck !!!
Regards
VJ

Similar Messages

View and Generic datasource in a transport request

Hi All,
I have created a view and a generic datasource by using the same in R/3. But I have saved them as local objects. Can some one please guide me through to collect them in a transport request to send them across the landscape.
Many thanks in advance...
Best Regards,
Nene.
Message was edited by:
Nene BW

View: SE11 -> Goto -> Object directory entry -> Assign a transportable package
DS: RSA6 -> Transport button ...

Creation of view and use it as internal table

dear community,
My questions is taht i am write a select quary in that data is very huge so that it cant inserted in to internal table(memory size of internal table) so i thing that i create aview same as data base table and when write the select quary use packsize and transfer recoerd ds in that view and use this view in my program
is above logic can work or not
also is size of view is greater than internal table memory size.

Writing the large volume to another table(which a view is just a view of a table or group of tables) is not going to solve the problem. You still have to select the data from the view(or table). Like I said in your other threads, you need to read by package size, and do something with that subset, whether it is summaring, or writeing to another system via RFC.
Regards,
Rich Heilman

Dynamic Creation of Table and assign Datasource.

Hi Experts
My scenario is like this..
There are more than one RFC models and the output list of these models I need to display in a table format.. The display should happen conditionally as per the availabity of the data in the output list..I need to display the data from multiple models at the same time the said table..
Please let me know the methods to create a table with 5 columns and also how to assign the datasource programatically..
THanks and Regards
SU

Hi,
Use only one Table View context.
Model Contexts:
RFC1,           RFC2,            RFC3
I_Attr11         I_Attr21          I_Attr31
I_Attr12         I_Attr22          I_Attr32
I_Attr13         I_Attr23          I_Attr33
I_Attr14         I_Attr24          I_Attr34
I_Attr15         I_Attr25          I_Attr35
Table Control Context:
Table
I_Attr1
I_Attr2
I_Attr3
I_Attr4
I_Attr5
Execute each model individually and loop through all model contexts...append the rows from each model context to table context.
//access the table node
IWDTableNode tableNode = wdContext.nodeTable();
IWDTableElement tableElem;
//loop thugh the models
for(int i=0; i<RFC1.size(); i++)
tableElem = tableNode.createTableElement();
tableElem.setAttr1(RFC1.getRFC1ElementAt(i).getAttr11);
tableElem.setAttr2(RFC1.getRFC1ElementAt(i).getAttr12);
tableElem.setAttr3(RFC1.getRFC1ElementAt(i).getAttr13);
tableElem.setAttr4(RFC1.getRFC1ElementAt(i).getAttr14);
tableElem.setAttr5(RFC1.getRFC1ElementAt(i).getAttr15);
tableNode.addElement(tableElem);
//similarly loop thrugh the remaining 2 models and append the table context
Regards
Srikanth

Problem in creating a view and generating datasource

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field      Type
MANDT     CLNT
RECNO     NUMC
STATUS     CHAR
LMODF     CHAR
Table2 has Fields
Fields     Type
MANDT     CLNT
RECNO     NUMC
PHCOS     QUAN
MATNR     CHAR
EQSFS     QUAN
MEINS     UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

Hi,
I think the problem here might be due to the fact that you are using MSEG table in your views.
I see that you have used MEINS in your Table2. So for Field PHCOS give your reference table as TABLE2 and field as MEINS as MEINS is already present in your table. Please leave out MSEG from your View.
Hope this helps. Please revert in case of any issues
Regards,
Pramod

Report Viewer and Multiple Data Sources

I know that it is possible to create a report in Crystal Reports using multiple data sources. But is it possible to use just the Free Report Viewer to view a report with Multiple Data Sources?
Our company uses Crystal Reports XI. I do not use the program myself, I am in the IT Department. I have limited knowledge of Crystal and do not do any of the report writing.
If this is possible, and if someone could help me out with what would need to be done, or point me in the right direction of a Knowledge Base or Help Topic that explains this, that would be great.
Thanks.

I believe it can but both data sources need to be set up. Ask a report designer to help you use the Designer to test this and see what is required.

Problems with creation of views and indexes....but the connection is nice!!

Hi everyone.
I'm running a SQLServer7 migration using migration workbench. The only objects to migrate are: tables, users: views: indexes and foreign keys.
It seesm to go fine with the migration, thus workbench is both connected to the SQLServer and the Oracle Workbench Repository in wich the Oracle Model is created. BUT, after a while and when the view creatiion should go on, I get this message (myhost is the host in wich target oracle instance would be the conversion).
" Failed to connect to /@myhost:1525:MANU. Check the password in the users"s Creation Options in the Oracle Model to make sure it is correct."
So it seems that It tries to connect as OS user...but it was working fine, so why is it trying to re-connect if data was migrating?
any solution?
thanks a lot!!

See my previous reply on another thread.
Donal

File Dialog (Details View and Multiple Selections for View File Type)

I would like to use the generic windows dialog box found in the toolbar under:
File I/O/Advanced File Functions/File Dialog
What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.rtf, another is *.csv, etc. Listing a single type is straightforward.
Also does anyone know if there is a way to have the dialog open in the DETAILS view automatically?
Thanks for any help!
Carlton

Hi,
You can do it in following ways:
1. Write in pattern input the string "*.txt; *.csv; *.rtf". This will show to the user only files with this extensions in the dialog.
2. Another way is to create ring or menu where user could specify the extension. Depending on this extension you could wire the appropriate string to the pattern input of "File Dialog.vi"
I have made an example.
Good luck.
Oleg Chutko.
Attachments:
fileopen.vi ‏42 KB

BC4J and multiple datasources

I'm attempting to explore JDeveloper 10g preview by re-implementing a small integration application that I worked on a few months ago. This application requires getting data from 3 different databases. When I attempt to drag a table from the second database onto the database diagram and create an entity object for it, I get the following error:
Business Component projects can implement only one connection. You have dragged a table onto a diagram when the table is in a different database connection from that of the current project.
I'm wondering if this is just a limitation of the preview edition, or if I'm going to need to use a different JDeveloper technology (like TopLink) to model this application.
Thanks,
Jonathan

I had this same problem in 9i version. I worked around it by implementing a Database link in the database and creating views on my side of the link which pull data as I need it. As far as JDeveloper is concerned, these views are mapped as entities which can be read/updated as normal. Hope this helps!
(BTW, if you find a way to do this completely within JDev let me know!)
~Rob Lundeen

Regarding creation of bom and material in cfolder

dear gurus,
i want help from all of u.
can any one tell me , what is the benefit of creating BOM / material in cfolder instead of R3.???????
full reward points for useful answer
thanks
[email protected]

Hi,
cFolders is a collaboration tool (tool used for talking to 3rd parties outside your company.)
Usually you will not give access to your ERP system to others. In that case you use cFolders as medium of sharing information with others.
if the 3rd party colleague want to suggest some improvements or modify you design documents etc., he can do it in cFolders. This then can be verified by you in cFolders (once modification is done he can change the status in cFolders which will trigger a notification to you ) then import it to cFolders.
regards
Murugesh

Merits and Demerits in MM Point of view for single and multiple CoCo

Hello Gurus
Please let me know , if what are all the merits & Demerits if we are going for Single company code in case of MM point of View and also what are all the merits and Demerits if we are going for multiple company code ....
Rgds
SAP!23

Hi
The number of company codes to be created is solely dependent on the business & legal entity's existing.
There are no merits & demerits whcih decide the number of compny codes to be created....
Thanks & Regards
Kishore

Creating Logic and modeling for SAP BW datasource in SAP HANA views and SLT

Hi to all,
I have small question.
We have BW system and SAP ECC as source system and to get data from SAP ECC source system we are using SAP ECC Standard data source.
Now we required to, create modeling in SAP HANA by use of HANA View and get data from SAP ECC source table via SLT.
So we can replicate same modeling,as we done in SAP BW system.
But my question is that, as SAP ECC standard data source hit multiple table and do run-time calculation, before sending to SAP BI.
How we can derives such calculation and logic, in our HANA studio, because as we know in SLT data transformation can be done in limited way also
in view we can not drive such logic via SQL script ?.
Is there any way we can do such modeling and logic in SAP HANA ?
or
is there any standard document for this type of case, which we can use ?
Note: We don't want to use SAP DS or DXC for data loading to HANA, as we want it in more real time.
Regards
Pavneet Rana

Thanks for reply,
As SLT is based on ABAP, so we can write complex logic in it.
But if we talk about SAP ECC standard data source, they have complex logic, based on multiple table.
So we need to write code from scratch in SLT to derive same result. but it will be huge time consuming , and required good ABAP skills, also it will lead to bug in code.
Also it will reduce the real time performance of SLT, due to complex logic.
Second option is procedure via SQL script, which is again huge effort in term if logic and can lead to error/bug in logic.
Does we have any other way or architecture to do this is very simple way, with high performance and less error issue.
Regards
Pavneet Rana

I have a list a and want to use (CSR) Jslink to change the view but multiple fields

I have a list but want to use CSR - jslink to change the view of multiple fields. Can a jslink have multiple fields to change. Looking at the samples
here
Would like to merge 2 or 3 script in one to do multiple things. Is this a best practice?
Thanks in Advance
Code snippet here below(tried this but not working for me.Sure im missing something): Trying to combine the prioritycolor and percentagecomplete together but not working
// Create object that have the context information about the field that we want to change it's output render
var fieldsContext= {};
fieldsContext.Templates = {};
fieldsContext.Templates.Fields = {
// Apply the new rendering for Priority field on List View
"Priority": { "View": priorityFiledTemplate },
"PercentComplete": {
"View": percentCompleteViewFiledTemplate,
"DisplayForm": percentCompleteViewFiledTemplate,
"NewForm": percentCompleteEditFiledTemplate,
"EditForm": percentCompleteEditFiledTemplate
SPClientTemplates.TemplateManager.RegisterTemplateOverrides(fieldsContext);
// This function provides the rendering logic for list view
function priorityFiledTemplate(ctx) {
var priority = ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
// Return html element with appropriate color based on priority value
switch (priority) {
case "(1) High":
return "<span style='color :#f00'>" + priority + "</span>";
break;
case "(2) Normal":
return "<span style='color :#ff6a00'>" + priority + "</span>";
break;
case "(3) Low":
return "<span style='color :#cab023'>" + priority + "</span>";
// This function provides the rendering logic for View and Display form
function percentCompleteViewFiledTemplate(ctx) {
var percentComplete = ctx.CurrentItem[ctx.CurrentFieldSchema.Name];
return "<div style='background-color: #e5e5e5; width: 100px; display:inline-block;'> \
<div style='width: " + percentComplete.replace(/\s+/g, '') + "; background-color: #0094ff;'> \
 </div></div> " + percentComplete;
// This function provides the rendering logic for New and Edit forms
function percentCompleteEditFiledTemplate(ctx) {
var formCtx = SPClientTemplates.Utility.GetFormContextForCurrentField(ctx);
// Register a callback just before submit.
formCtx.registerGetValueCallback(formCtx.fieldName, function () {
return document.getElementById('inpPercentComplete').value;
return "<input type='range' id='inpPercentComplete' name='inpPercentComplete' min='0' max='100' \
oninput='outPercentComplete.value=inpPercentComplete.value' value='" + formCtx.fieldValue + "' /> \
<output name='outPercentComplete' for='inpPercentComplete' >" + formCtx.fieldValue + "</output>%";

Hi Patrick,
It works in my test environment using your code.
I suggest follow the steps as below:
1. Save the following code as a js file (TaskListView.js) and upload it into the SiteAssets Document Library.
2. Edit the list view page.
3. Edit the list web part. Go to Miscellaneous -> JS Link.
4. Add the following URL into the JS Link textbox.
~site/SiteAssets/TaskListView.js
5. Click "OK" and save the page.
If it still not works, please check whether active the Minimal Download Strategy feature in site feature or not.
Best Regards
Dennis Guo
TechNet Community Support

HT2688 Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared librar

Working on a single computer with multiple users, I have set things up to allow each user to view and listen to the others' music libraries under the "Shared Library" function. Can you then connect an iPod touch and copy music from a shared library?

Was your wife logged into the libray at the time you tried to log in? I have had a similar problem and it was because another user was logged into the library when I attempted to. I got the permission denied banner.

Regarding creation Of Help View

Hi , Can Any body Tell me what is the step by Step Procedure how to create the Help View. Plz it's urgent .
Thanks&Regards .
Nihar.

Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
Go thru this link plzz
http://help.sap.com/saphelp_nw2004s/helpdata/en/cf/21ecf9446011d189700000e8322d00/frameset.htm
Difference between "Help View" and "Search Help"
Reward points for useful Answers

Regarding Creation of Views and Multiple Datasources.

Similar Messages

Maybe you are looking for