Regarding Data base Adjustment

Hi All,
while adjusting data base in SE14 i got an error in converting QCM8TAB to TAB so i unlock the table and continue. Actually in this process QCM8TAB is a temporary table its need to be deleted after adjusting. but because of the process was not completed QCM8TAB was not deleted.how to delete QCM8TAB.
Thanks,
Ananth

Have u deleted the records in the table and then tried to delete the table from SE11? I think after u delete the records u can also delete the table from SE14.. Try it..
Hope it may helps.
Please reward if it helps.
Thanks in advance,
Phani

Similar Messages

Regarding Data Base Select Query

Hi All,
          I want to extract the data from data base into my internal table
          by not giving the exact value but the pattern.
          Ex) I want to select the vendor starting with patter '12*'
                from LFA table in my internal table.
          Which select Query I should use for getting the
          Vendor No. starting with pattern '12*' ?.
          Points will be rewaded.
          Thanks in Advance.
With Regards
Jitendra Gujarathi.

Hi jitendra,
1. simple
2.
select * from lfa1
into table lfa1
where lifnr like '12%'.
regards,
amit m .

Error while adjusting data base

Hi All,
while adjusting data base in SE14 i got an error in converting QCM8TAB to TAB so i unlock the table and continue. Actually in this process QCM8TAB is a temporary table its need to be deleted after adjusting. but because of the process was not completed QCM8TAB was not deleted.how to delete QCM8TAB.
Thanks,
Ananth

Have u deleted the records in the table and then tried to delete the table from SE11? I think after u delete the records u can also delete the table from SE14.. Try it..
Hope it may helps.
Please reward if it helps.
Thanks in advance,
Phani

Error opening data base for the library for Aperture

Hello,
I have been using Aperture all day and for some reason am now getting this error message when trying to open it again.
Te was an error opening the data base for the library "users/*******/pictures/aperture3triallibrary.aplibrary
Has this happened for anyone else?
Many Thanks

When I hold down ⌘⌥ firmly, at the same time, and with these keys held down double click the Aperture library that I want to repair, I get this panel:
Then, when I select "Repair" Aperture will show a progress bar and the Dock icon will stay highlighted.
When it is finished, the Aperture window will open.
When I select repair, it seems as though it doesn't run. I don't get a dialog box to confirm it's happening and on the dock the little light under the Aperture icon isn't lit, which seems it is'nt open or running.
After you select "Repair", does the panel close and then nothing? Or does the panel not react?
I still don't see fully, what is going on on your mac.
But it is a good sign, that you can create a new library. That suggests, that Aperture is running correctly on your mac, and "only" your old library has a problem. Try to test the new library - import a few images and try to adjust them.
Once you are convinced, that the new library is working well, you have three options.
Try "Rebuild" instead of "Repair".
Or try to import your old library into the new library (Aperture's main menu bar > File >Import > Library) - that is another approach to rebuilsd the library.
Or restore from backup. To restore from Time Machine, open a Finder Window showing your Aperture library, and then enter Time Machine. Go back in time to the most recent date that has a working Aperture library and select "Restore". If you have enough space on your disk, restore to a different folder and don't overwrite your current library.
Regards
Léonie

Post BI 7.0 Technical Upgrade warning in Data Basis

Hi,
We have carried out technical upgrade to BI 7.0 . After upgrade, there were some inconsistency in Data basis which was removed thru System Synchronization program. Similarly consolidation area and source data basis also are consistent after saving.
However, when I carry out CHECK (right click and check) on Data Basis, it is throwing warning message for 0BCS_REFYR (master data) and 0BCS_DPER (master data)
The error message for one of them is re-produced below:
Critical change in content: InfoObject 0BCS_DPER (master data)
Message no. UCM0143
Diagnosis
Field Life of Depreciation (Amortization) in Periods is used in the data model of data basis Data basis ISB. The corresponding InfoObject 0BCS_DPER belongs to SAP BW Content, which is delivered with the consolidation system. However, the current definition of the InfoObject does not coincide with the delivered version.
In this case, the attribute With Master Data has been changed in the InfoObject definition. This change puts the consistency of the consolidation data model at risk.
Procedure
Adjust the definition of InfoObject 0BCS_DPER accordingly.
Always avoid changing InfoObjects that are delivered in SAP BW Content.
We have not made any changes to infoobject whatsoever. Please advise how to reslove this.
All BCS functions are working normally.
Best Regards,
UR

Warning Message is reproduced below:
''Critical change in content: InfoObject 0BCS_DPER (master data)
Message no. UCM0143
Diagnosis
Field Life of Depreciation (Amortization) in Periods is used in the data model of
data basis Data basis ISB. The corresponding InfoObject 0BCS_DPER belongs
to SAP BW Content, which is delivered with the consolidation system. However,
the current definition of the InfoObject does not coincide with the delivered version.
In this case, the attribute With Master Data has been changed in the
InfoObject definition. This change puts the consistency of the
consolidation data model at risk.
Procedure
Adjust the definition of InfoObject 0BCS_DPER accordingly.
Always avoid changing InfoObjects that are delivered in SAP BW Content
Best Regards,
UR

Quota Generation not happen's on Pro data basis .

Dear experts,
Time evalution status - 1.
1.Employee service 0 - 5 years - 24 Days entitlement
2.Employee service 5 - 10 years - 29 days entitlement.
when generating quota for employee less than five years its calculating correctly.when come's to employee more than 5 years its not calculating on pro-data basis of employee joining month. Instead of Month it's looking at the year and calculating it.
DOJ of employee
Mar-09
Year
TOTAL quota accrued
2009
20
2010
24
2011
24
2012
24
2013
24
Client requirement
System calculation as of now
2014
28
29
Calculation part.
below screen shot show how system calculating and how client needed.
how this scenario can be configured.
Regards
Vinodh

Check the Deduction rule for that Quota
once check the Groupings for ESG and PSA
V_001P_ALL
V_503_ALL

How to stored data after clicking checkbox in data base table

REPORT ZT                                      .
TYPE-pools: slis.
tables:mkpf,mseg,mard,COWB_COMP,ZTABLE.
Types:BEGIN OF tp_data,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     endkz like COWB_COMP-endkz,
END OF tp_data,
tp_tbl_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA: WA TYPE TP_DATA.
MODIFIED*******************
*data: t_data like Y00_MM_ISSUE_DAT occurs 0 with header line.
Constants
Data objects (variable declarations and definitions)
Report data to be shown.
DATA: it_data TYPE STANDARD TABLE OF tp_data.
MODIFIED*******************
DATA : V_REPID LIKE SY-REPID.
MODIFIED*******************
Heading of the report.
DATA: t_heading TYPE slis_t_listheader.
*========================== Selection Screen
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
              smatnr FOR mseg-matnr MODIF ID m2,
              swerks FOR mard-werks MODIF ID m3,
              slgort FOR mard-lgort MODIF ID m4,
              slgpbe FOR mard-lgpbe MODIF ID m5,
              scharg FOR mseg-charg MODIF ID m6,
              sbwart FOR mseg-bwart MODIF ID m7,
              skostl FOR mseg-kostl MODIF ID m8,
              saufnr FOR mseg-aufnr MODIF ID m9,
              srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
          pse RADIOBUTTON GROUP radi,
          bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
MODIFIED*******************
INITIALIZATION.
V_REPID = sy-repid.
MODIFIED*******************
*=========================== Event Blocks
AT selection-SCREEN.
start-OF-selection.
PERFORM get_data USING it_data.
END-OF-selection.
PERFORM build_alv USING it_data t_heading.
*=========================== Subroutines
*&      Form get_data
      Gets the information to be shown in the report.
FORM get_data USING t_data TYPE tp_tbl_data.
SELECT msegmblnr msegmatnr mardwerks mardlgort mard~lgpbe
msegcharg msegbwart mkpf~budat
   msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO CORRESPONDING FIELDS OF TABLE t_data
FROM mseg
JOIN mard ON mardmatnr EQ msegmatnr
              JOIN mkpf ON msegmblnr EQ mkpfmblnr
              WHERE mseg~matnr IN smatnr.
ENDFORM.                    " get_data
*&      Form build_alv
      Builds and display the ALV Grid.
FORM build_alv USING t_data TYPE tp_tbl_data
     t_heading TYPE slis_t_listheader.
ALV required data objects.
DATA: w_title   TYPE lvc_title,
       w_comm    TYPE slis_formname,
       w_status TYPE slis_formname,
       x_layout TYPE slis_layout_alv,
       t_event    TYPE slis_t_event,
       t_fieldcat TYPE slis_t_fieldcat_alv,
       t_sort     TYPE slis_t_sortinfo_alv.
REFRESH t_fieldcat.
REFRESH t_event.
REFRESH t_sort.
CLEAR x_layout.
CLEAR w_title.
Field Catalog
PERFORM set_fieldcat2 USING:
       1 'MBLNR' 'MBLNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       2 'MATNR' 'MATNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       3 'WERKS' 'WERKS' 'MARD' space space space space space space
space space space space space space t_fieldcat,
       4 'LGORT' 'LGORT' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       5 'LGPBE' 'LGPBE' 'MARD' space space space space space space
space space space space space space t_fieldcat ,
       6 'CHARG' 'CHARG' 'MSEG' space space space space space space
space space space space space space t_fieldcat ,
       7 'BWART' 'BWART' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       8 'BUDAT' 'BUDAT' 'MKPF' space space space space space space
space space space space space space t_fieldcat,
       9 'MENGE' 'MENGE' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       10 'MEINS' 'MEINS' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       11 'KOSTL' 'KOSTL' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       12 'AUFNR' 'AUFNR' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
       13 'RSNUM' 'RSNUM' 'MSEG' space space space space space space
space space space space space space t_fieldcat,
   14 'ENDKZ' 'ENDKZ' 'COWB_COMP' space space 'select' 'Select this row' 'Sel' 'Select this row' space space space 'X' 'X' space t_fieldcat.
Layout
x_layout-zebra = 'X'.
Top of page heading
PERFORM set_top_page_heading USING t_heading t_event.
Events
PERFORM set_events USING t_event.
GUI Status
w_status = ''.
User commands
w_comm   = 'USER_COMMAND'.
Order
Example
PERFORM set_order USING '<field>' 'IT_DATA' 'X' space space t_sort.
PERFORM set_order USING 'MBLNR' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELN' 'IT_DATA' 'X' space 'X' t_sort.
PERFORM set_order USING 'EBELP' 'IT_DATA' 'X' space space t_sort.
Displays the ALV grid
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program       = V_REPID
   it_fieldcat              = t_fieldcat
   is_layout                = x_layout
   it_sort                  = t_sort
   i_callback_pf_status_set = w_status
   i_callback_user_command = w_comm
   i_save                   = 'X'
   it_events                = t_event
   i_grid_title             = w_title
TABLES
   t_outtab                 = t_data
EXCEPTIONS
   program_error            = 1
   OTHERS                   = 2.
IF sy-subrc <> 0.
   MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
   WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " build_alv.
*&      Form set_top_page_heading
      Creates the report headings.
FORM set_top_page_heading USING t_heading TYPE slis_t_listheader
     t_events TYPE slis_t_event.
DATA: x_heading TYPE slis_listheader,
       x_event   TYPE LINE OF slis_t_event.
Report title
CLEAR t_heading[].
CLEAR x_heading.
x_heading-typ = 'H'.
x_heading-info = 'Reporte Prueba'(001).
APPEND x_heading TO t_heading.
Program name
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Program: '.
x_heading-info = sy-repid.
APPEND x_heading TO t_heading.
User who is running the report
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'User: '.
x_heading-info = sy-uname.
APPEND x_heading TO t_heading.
Date of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Date: '.
WRITE sy-datum TO x_heading-info.
APPEND x_heading TO t_heading.
Time of execution
CLEAR x_heading.
x_heading-typ = 'S'.
x_heading-KEY = 'Time: '.
WRITE sy-uzeit TO x_heading-info.
APPEND x_heading TO t_heading.
Top of page event
x_event-name = slis_ev_top_of_page.
x_event-FORM = 'TOP_OF_PAGE'.
APPEND x_event TO t_events.
ENDFORM.
*&      Form set_events
      Sets the events for ALV.
      The TOP_OF_PAGE event is alredy being registered in
      the set_top_page_heading subroutine.
FORM set_events USING t_events TYPE slis_t_event.
DATA: x_event   TYPE LINE OF slis_t_event.
Example
clear x_event.
x_event-name = .
x_event-form = .
append x_event to t_event.
ENDFORM.
*&      Form set_order
      Adds an entry to the order table.
FORM set_order USING p_fieldname p_tabname p_up p_down p_subtot
     t_sort TYPE slis_t_sortinfo_alv.
DATA: x_sort TYPE slis_sortinfo_alv.
CLEAR x_sort.
x_sort-fieldname = p_fieldname.
x_sort-tabname   = p_tabname.
x_sort-UP = p_up.
x_sort-down = p_down.
x_sort-subtot = p_subtot.
APPEND x_sort TO t_sort.
ENDFORM.                    "set_order
*&      Form set_fieldcat2
      Adds an entry to the field catalog.
FORM set_fieldcat2 USING p_colpos p_fieldname p_ref_fieldname
p_ref_tabname
     p_outputlen p_noout
     p_seltext_m p_seltext_l p_seltext_s p_reptext_ddic p_ddictxt
     p_hotspot p_showasicon p_checkbox p_edit
     p_dosum
     t_fieldcat TYPE slis_t_fieldcat_alv.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
General settings
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-col_pos = p_colpos.
wa_fieldcat-no_out = p_noout.
wa_fieldcat-HOTSPOT = p_hotspot.
wa_fieldcat-CHECKBOX = p_checkbox.
wa_fieldcat-ICON = p_showasicon.
wa_fieldcat-do_sum = p_dosum.
Set reference fieldname, tablenam and rollname.
If p_ref_tabname is not given, the ref_fieldname given is a data
*element.
If p_ref_tabname is given, the ref_fieldname given is a field of a
*table. In case ref_fieldname is not given, it is copied from the
*fieldname.
IF p_ref_tabname IS INITIAL.
   wa_fieldcat-rollname =   p_ref_fieldname.
ELSE.
   wa_fieldcat-ref_tabname = p_ref_tabname.
   IF p_ref_fieldname EQ space.
     wa_fieldcat-ref_fieldname =   wa_fieldcat-fieldname.
   ELSE.
     wa_fieldcat-ref_fieldname =   p_ref_fieldname.
   ENDIF.
ENDIF.
Set output length.
IF NOT p_outputlen IS INITIAL.
   wa_fieldcat-outputlen = p_outputlen.
ENDIF.
Set text headers.
IF NOT p_seltext_m IS INITIAL.
   wa_fieldcat-seltext_m = p_seltext_m.
ENDIF.
IF NOT p_seltext_l IS INITIAL.
   wa_fieldcat-seltext_l = p_seltext_l.
ENDIF.
IF NOT p_seltext_s IS INITIAL.
   wa_fieldcat-seltext_s = p_seltext_s.
ENDIF.
IF NOT p_reptext_ddic IS INITIAL.
   wa_fieldcat-reptext_ddic = p_reptext_ddic.
ENDIF.
IF NOT p_ddictxt IS INITIAL.
   wa_fieldcat-ddictxt = p_ddictxt.
ENDIF.
Set as editable or not.
IF NOT p_edit IS INITIAL.
   wa_fieldcat-INPUT     = 'X'.
   wa_fieldcat-EDIT     = 'X'.
ENDIF.
APPEND wa_fieldcat TO t_fieldcat.
ENDFORM.                   "set_fieldcat2
*&      Form top_of_page
      Called on top_of_page ALV event.
      Prints the heading.
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
     i_logo             = 'TRVPICTURE04'
   it_list_commentary = t_heading.
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      Called on user_command ALV event.
      Executes custom commands.
FORM user_command USING r_ucomm     LIKE sy-ucomm
     rs_selfield TYPE slis_selfield.
case sy-ucomm.
WHEN '&DATA_SAVE'.
LOOP AT IT_DATA INTO WA WHERE ENDKZ = 'X'.
   IF WA-ENDKZ = 'X'.
*******MODIFIED*********************************
U DELETE THIS CODE N USER UR INSERT CODE TO CHECK
SY-MSGV1 = WA-MBLNR.                              " U CAN DELETE
SY-MSGV2 = WA-MATNR.                              " U CAN DELETE
MESSAGE ID 'BC_BOR' TYPE 'I' NUMBER '888'          " U CAN DELETE
        WITH SY-MSGV1 SY-MSGV2. " U CAN DELETE
*******MODIFIED*********************************
   INSERT ZTABLE.
   ENDIF.
endloop.
ENDCASE.
ENDFORM.                    "user_command
this is my code, database will stored in fields only.data is empty,
how to slove that one,send any sugestion.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

How to stored data after clicking check box save in data base table

TABLES:mseg,mard,mkpf.
TYPE-POOLS:slis.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS:smblnr FOR mseg-mblnr MODIF ID m1,
               smatnr FOR mseg-matnr MODIF ID m2,
               swerks FOR mard-werks MODIF ID m3,
               slgort FOR mard-lgort MODIF ID m4,
               slgpbe FOR mard-lgpbe MODIF ID m5,
               scharg FOR mseg-charg MODIF ID m6,
               sbwart FOR mseg-bwart MODIF ID m7,
               skostl FOR mseg-kostl MODIF ID m8,
               saufnr FOR mseg-aufnr MODIF ID m9,
               srsnum FOR mseg-rsnum MODIF ID m10.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS:pre RADIOBUTTON GROUP radi USER-COMMAND ucomm DEFAULT 'X',
           pse RADIOBUTTON GROUP radi,
           bps RADIOBUTTON GROUP radi.
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETER:layout TYPE i.
SELECTION-SCREEN END OF BLOCK b3.
DATA:BEGIN OF itab OCCURS 0,
     mblnr LIKE mseg-mblnr,
     matnr LIKE mseg-matnr,
     werks LIKE mard-werks,
     lgort LIKE mard-lgort,
     lgpbe LIKE mard-lgpbe,
     charg LIKE mseg-charg,
     bwart LIKE mseg-bwart,
     budat LIKE mkpf-budat,
     menge LIKE mseg-menge,
     meins LIKE mseg-meins,
     kostl LIKE mseg-kostl,
     aufnr LIKE mseg-aufnr,
     rsnum LIKE mseg-rsnum,
     checkbox TYPE c,
     END OF itab.
DATA: gt_fieldcat TYPE slis_t_fieldcat_alv,
       gw_fieldcat TYPE slis_fieldcat_alv,
       gt_layout TYPE slis_layout_alv.
START-OF-SELECTION.
SELECT msegmblnr msegmatnr mardwerks mardlgort mardlgpbe msegcharg msegbwart mkpfbudat
    msegmenge msegmeins msegkostl msegaufnr mseg~rsnum
INTO TABLE itab FROM
          mseg JOIN mard ON mardmatnr EQ msegmatnr
               JOIN mkpf ON msegmblnr EQ mkpfmblnr
               WHERE mseg~matnr IN smatnr.
IF sy-subrc EQ 0.
    SORT itab BY matnr.
    PERFORM display_alv_output.
ENDIF.
*&      Form display_alv_output
      text
--> p1        text
<-- p2        text
FORM display_alv_output.
REFRESH gt_fieldcat.
gw_fieldcat-fieldname = 'MBLNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 1.
gw_fieldcat-seltext_m = 'material document'.
gw_fieldcat-key = 'x'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MATNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 2.
gw_fieldcat-seltext_m = 'material'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'WERKS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 3.
gw_fieldcat-seltext_m = 'plant'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGORT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 4.
gw_fieldcat-seltext_m = 'storage location'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'LGPBE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 5.
gw_fieldcat-seltext_m = 'storage bin'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'CHARG'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 6.
gw_fieldcat-seltext_m = 'Batch number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BWART'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 7.
gw_fieldcat-seltext_m = 'Movement Type (Inventory Management)'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'BUDAT'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 8.
gw_fieldcat-seltext_m = 'Posting Date in the Document'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MENGE'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 9.
gw_fieldcat-seltext_m = 'QUANTITY'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'MEINS'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 10.
gw_fieldcat-seltext_m = 'Basic unit of measure'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'KOSTL'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 11.
gw_fieldcat-seltext_m = 'Cost center'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'AUFNR'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 12.
gw_fieldcat-seltext_m = 'Order Number'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-fieldname = 'RSNUM'.
gw_fieldcat-tabname = 'itab'.
gw_fieldcat-col_pos = 13.
gw_fieldcat-seltext_m = 'Number of Reservation / Depe'.
gw_fieldcat-key = ' '.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
gw_fieldcat-col_pos = 14.
gw_fieldcat-fieldname = 'CHECKBOX'.
gw_fieldcat-seltext_m = 'Compltd'.
gw_fieldcat-checkbox = 'X'.
gw_fieldcat-edit = 'X'.
APPEND gw_fieldcat TO gt_fieldcat.
CLEAR gw_fieldcat.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
    I_CALLBACK_PROGRAM                = 'ZREPORT'
    IS_LAYOUT                         = gt_layout
    IT_FIELDCAT                       = gt_fieldcat
   TABLES
     t_outtab                          = itab
EXCEPTIONS
    PROGRAM_ERROR                     = 1
    OTHERS                            = 2.
ENDFORM.                    " display_alv_output
this is mycode .
send me replay.

Hi Lakshmi,
       Can u explain briefly what is ur requirement. U mean to say that after clicking the checkbox in data base table or Screen?
Regards,
Jayaram...

How to develop a report based on multiple data bases in BIP

Hi,
I have to develop a report based on multiple database(Sources). My queries is having multiple data base tables. How to achieve this in BIP
Regards,
Malli

Hi ,
After creating the dataset under datamodel save your data sets.
Click on Datamodel , on the right side window you will have the Main data set option , click on the drop down option and select Concatenated sql option.
Check the below links you will get a good idea.
http://www.rittmanmead.com/2008/04/bi-publisher-reports-with-multiple-data-sources/
http://docs.oracle.com/cd/E12096_01/books/PubUser/T421739T423025.htm
If the Post is useful to you award the points :)
Thanks,
Ananth v

How can I insert images in data base?

Hi!!
I don't know what i need to do.
My problem is that I need to save images in the data base but I don't know how. The images are from autopart catalogues.
Thanks for your help

Hi,
Here is the example which uses dbms_lob utility to insert an image into the database.
Create a table to store the blobs:
create table blobs
( id varchar2(255),
blob_col blob
Step 2.
Create a logical directory in the database to the physical file system:
create or replace directory MY_FILES as 'c:\images';
Step 3.
Create a procedure to load the blobs from the file system using the logical
directory. The gif "aria.gif" must exist in c:\images.
create or replace procedure insert_img as
f_lob bfile;
b_lob blob;
begin
insert into blobs values ( 'MyGif', empty_blob() )
return blob_col into b_lob;
f_lob := bfilename( 'MY_FILES', 'aria.gif' );
dbms_lob.fileopen(f_lob, dbms_lob.file_readonly);
dbms_lob.loadfromfile( b_lob, f_lob, dbms_lob.getlength(f_lob) );
dbms_lob.fileclose(f_lob);
commit;
end;
Regards
Anand
null

How can i read data in DCS data base

I have logged current and voltage in dcs data base. I want to read that voltage with respect to time and plot in voltage Vs current graph. but i have a ploblem to read that data in dcs libary. can any one help me please.
Thanks & Regard
Nitin Jain

I can't claim to know much about visual C# Net, but I do know a bit about pagemaker. It really can't handle equations. there are a few work arounds involving things like baseline shifts and multiple text boxes, but generally equations were created in different programs and placed in pagemaker in picture or eps files. Either way the chances of extracting usable data out of pagemaker is very slim.
Jay

How to trigger pop-up window in report and update data base from report

Hi All,
I have a requirement, in a report output list to trigger a pop up window with some rejection codes corresponding to each sales order when i select from the output list. Also i need to update data base by selecting one of the rejection code in the pop-up window list for that sales order. Can any one please let me know how to achive this.
Also, i have check boxes for each record in the output list. Also, i have added one more check box as "Select All'. When select 'Sleect All' check box , all check boxes need to be checked, how to achieve this. PLease let me know.
Thanks in advance.
Regards,
Rajesh

Hi check this code of editable ALV report... I updated the data base with the changes made..in the editable ALV
*& Report ZJAY_EDIT_ALV
REPORT zjay_edit_alv.
* TYPE-POOLS *
TYPE-POOLS: slis.
* INTERNAL TABLES/WORK AREAS/VARIABLES
DATA: i_fieldcat TYPE slis_t_fieldcat_alv,
i_index TYPE STANDARD TABLE OF i WITH HEADER LINE,
w_field TYPE slis_fieldcat_alv,
p_table LIKE dd02l-tabname,
dy_table TYPE REF TO data,
dy_tab TYPE REF TO data,
dy_line TYPE REF TO data.
* FIELD-SYMBOLS *
FIELD-SYMBOLS: <dyn_table> TYPE STANDARD TABLE,
<dyn_wa> TYPE ANY,
<dyn_field> TYPE ANY,
<dyn_tab_temp> TYPE STANDARD TABLE.
* SELECTION SCREEN *
PARAMETERS: tabname(30) TYPE c DEFAULT 'MARA',
lines(5) TYPE n DEFAULT 7.
* START-OF-SELECTION *
START-OF-SELECTION.
* Storing table name
p_table = tabname.
* Create internal table dynamically with the stucture of table name
* entered in the selection screen
CREATE DATA dy_table TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_table->* TO <dyn_table>.
IF sy-subrc <> 0.
MESSAGE i000(z_zzz_ca_messages) WITH ' No table found'.
LEAVE TO LIST-PROCESSING.
ENDIF.
* Create workarea for the table
CREATE DATA dy_line LIKE LINE OF <dyn_table>.
ASSIGN dy_line->* TO <dyn_wa>.
* Create another temp. table
CREATE DATA dy_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN dy_tab->* TO <dyn_tab_temp>.
SORT i_fieldcat BY col_pos.
* Select data from table
SELECT * FROM (p_table)
INTO TABLE <dyn_table>
UP TO lines ROWS.
REFRESH <dyn_tab_temp>.
* Display report
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
i_callback_user_command = 'USER_COMMAND'
i_callback_pf_status_set = 'SET_PF_STATUS'
TABLES
t_outtab = <dyn_table>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
*& Form SET_PF_STATUS
* Setting custom PF-Status
* -->RT_EXTAB Excluding table
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD'. "copy it from SALV func group standard
ENDFORM. "SET_PF_STATUS
*& Form user_command
* Handling custom function codes
* -->R_UCOMM Function code value
* -->RS_SELFIELD Info. of cursor position in ALV
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
<l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>.
CASE r_ucomm.
* When a record is selected
WHEN '&IC1'.
* Read the selected record
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
rs_selfield-tabindex.
IF sy-subrc = 0.
* Store the record in an internal table
APPEND <dyn_wa> TO <l_tab>.
* Fetch the field catalog info
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-repid
i_structure_name = p_table
CHANGING
ct_fieldcat = i_fieldcat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
IF sy-subrc = 0.
* Make all the fields input enabled except key fields
w_field-input = 'X'.
MODIFY i_fieldcat FROM w_field TRANSPORTING input
WHERE key IS INITIAL.
ENDIF.
* Display the record for editing purpose
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = sy-repid
i_structure_name = p_table
it_fieldcat = i_fieldcat
i_screen_start_column = 10
i_screen_start_line = 15
i_screen_end_column = 200
i_screen_end_line = 20
TABLES
t_outtab = <l_tab>
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* Read the modified data
READ TABLE <l_tab> INDEX 1 INTO <l_wa>.
* If the record is changed then track its index no.
* and populate it in an internal table for future
* action
IF sy-subrc = 0 AND <dyn_wa> <> <l_wa>.
<dyn_wa> = <l_wa>.
i_index = rs_selfield-tabindex.
APPEND i_index.
ENDIF.
ENDIF.
ENDIF.
* When save button is pressed
WHEN 'SAVE'.
* Sort the index table
SORT i_index.
* Delete all duplicate records
DELETE ADJACENT DUPLICATES FROM i_index.
LOOP AT i_index.
* Find out the changes in the internal table
* and populate these changes in another internal table
READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX i_index.
IF sy-subrc = 0.
APPEND <dyn_wa> TO <dyn_tab_temp>.
ENDIF.
ENDLOOP.
* Lock the table
CALL FUNCTION 'ENQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table
EXCEPTIONS
foreign_lock = 1
system_failure = 2
OTHERS = 3.
IF sy-subrc = 0.
* Modify the database table with these changes
MODIFY (p_table) FROM TABLE <dyn_tab_temp>.
REFRESH <dyn_tab_temp>.
* Unlock the table
CALL FUNCTION 'DEQUEUE_E_TABLE'
EXPORTING
mode_rstable = 'E'
tabname = p_table.
ENDIF.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command

How to delete copyed wrongly in the data base

Hi Gurus,
I copy the cube 0IC_C03 to Z0IC_C03.
After that i went to RSZC--> copy from 0IC_C03 to Z0IC_C03 all the queries, but when i am copying i dint remove the _1 beside each query. when i repeat system telling queries already in the data base. can you tell how to delete and copy freshly.
Points Assure.
Thanks
Amarendra

Hi,
you can use rszdelete where you can choose the queries and query objects which you want to delete.
After this you can start the copy again.
regards
Cornelia

I'm looking for a decent CRM app, so I can load my customer data base

HI I'm looking for a CRM app or package, just started using my air for business and would like to have my customer data base with me handy
for pulling up local customers and being able to enter some data sales related or just comments regarding conversations and topics talked about so I can follow up ect!
any suggestions would be appreciated!
thanks, Lee.

Hi Lee what sort of database are you looking at also what sort of business do you run ?
I have a CRM Package that is native to mac and pc and is built off of filemaker it is normally targeted at Recruitment businesses.
Drop me a line if you wanna chat about it!
Sammie

Performance problem in select data from data base

hello all,
could you please suggest me which select statement is good for fetch data form data base if data base contain more than 10 lac records.
i am using SELECT PACKAGE SIZE n statement, but it's taking lot of time .
with best regards
srinivas rathod

Hi Srinivas,
if you have huge data and selecting ,you could decrease little bit time if you use better techniques.
I do not think SELECT PACKAGE SIZE will give good performance
see the below examples :
ABAP Code Samples for Simple Performance Tuning Techniques
1. Query including select and sorting functionality
tables: mara, mast.
    data: begin of itab_new occurs 0,
             matnr like mara-matnr,
             ernam like mara-ernam,
             mtart like mara-mtart,
             matkl like mara-matkl,
             werks like mast-werks,
           aenam like mast-aenam,
stlal like mast-stlal,
     end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on
fmatnr = gmatnr where gstlal = '01' order by fernam.
Code B
tables: mara, mast.
data: begin of itab_new occurs 0,
      matnr like mara-matnr,
      ernam like mara-ernam,
      mtart like mara-mtart,
      matkl like mara-matkl,
      werks like mast-werks,
      aenam like mast-aenam,
      stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01'.
sort itab_new by ernam.
Both the above codes essentially do the same function, but the execution time for code B is considerably lesser than that of Code A. Reason: The Order by clause associated with a select statement increases the execution time of the statement, so it is profitable to sort the internal table once after selecting the data.
2. Performance Improvement Due to Identical Statements Execution Plan
Consider the below queries and their levels of efficiencies is saving the execution
tables: mara, mast.
data: begin of itab_new occurs 0,
      matnr like mara-matnr,
      ernam like mara-ernam,
      mtart like mara-mtart,
      matkl like mara-matkl,
      werks like mast-werks,
      aenam like mast-aenam,
      stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01' .
sort itab_new.
select fmatnr fernam
fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as
f inner join mast as g on f~matnr =
gmatnr where gstlal
= '01' .
Code D (Identical Select Statements)
tables: mara, mast.
data: begin of itab_new occurs 0,
      matnr like mara-matnr,
      ernam like mara-ernam,
      mtart like mara-mtart,
      matkl like mara-matkl,
      werks like mast-werks,
      aenam like mast-aenam,
      stlal like mast-stlal,
end of itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01' .
sort itab_new.
select fmatnr fernam fmtart fmatkl gwerks gaenam g~stlal
into table itab_new from mara as f inner join mast as g on f~matnr =
gmatnr where gstlal = '01' .
Both the above codes essentially do the same function, but the execution time for code B is considerably lesser than that of Code A. Reason: Each SQL statement during the process of execution is converted into a series of database operation phases. In the second phase of conversion (Prepare phase) an execution plan is determined for the current SQL statement and it is stored, if in the program any identical select statement is used, then the same execution plan is reused to save time. So retain the structure of the select statement as the same when it is used more than once in the program.
3. Reducing Parse Time Using Aliasing
A statement which does not have a cached execution plan should be parsed before execution; this parsing phase is a highly time and resource consuming, so parsing time for any sql query must include an alias name in it for the following reason.
1.     Providing the alias name will enable the query engine to resolve the tables to which the specified fields belong to.
2.     Providing a short alias name, (a single character alias name) is more efficient that providing a big alias name.
Code E
select jmatnr jernam jmtart jmatkl
gwerks gaenam g~stlal into table itab_new from mara as
j inner join mast as g on jmatnr = gmatnr where
            g~stlal = '01' .
In the above code the alias name used is j .
4. Performance Tuning Using Order by Clause
If in a SQL query you are going to read a particular database record based on some key values mentioned in the select statement, then the read query can be very well optimized by ordering the fields in the same order in which we are going to read them in the read query.
Code F
tables: mara, mast.
data: begin of itab_new occurs 0,
      matnr like mara-matnr,
      ernam like mara-ernam,
      mtart like mara-mtart,
      matkl like mara-matkl,
      end of itab_new.
select MATNR ERNAM MTART MATKL from mara into table itab_new where
MTART = 'HAWA' ORDER BY MATNR ERNAM MTART MATKL.
read table itab_new with key MATNR = 'PAINT1'   ERNAM = 'RAMANUM'
MTART = 'HAWA'   MATKL = 'OFFICE'.
Code G
tables: mara, mast.
data: begin of itab_new occurs 0,
      matnr like mara-matnr,
      ernam like mara-ernam,
      mtart like mara-mtart,
      matkl like mara-matkl,
      end of itab_new.
select MATNR ERNAM MTART MATKL from mara into table itab_new where
MTART = 'HAWA' ORDER BY ERNAM MATKL MATNR MTART.
read table itab_new with key MATNR = 'PAINT1'   ERNAM = 'RAMANUM'
MTART = 'HAWA'   MATKL = 'OFFICE'.
In the above code F, the read statement following the select statement is having the order of the keys as MATNR, ERNAM, MTART, MATKL. So it is less time intensive if the internal table is ordered in the same order as that of the keys in the read statement.
5. Performance Tuning Using Binary Search
A very simple but useful method of fine tuning performance of a read statement is using Binary search addition to it. If the internal table consists of more than 20 entries then the traditional linear search method proves to be more time intensive.
Code H
select * from mara into corresponding fields of table intab.
sort intab.
read table intab with key matnr = '11530' binary search.
Code I
select * from mara into corresponding fields of table intab.
sort intab.
read table intab with key matnr = '11530'.
Thanks
Seshu

Regarding Data base Adjustment

Similar Messages

Maybe you are looking for