Regarding data transfer from ods to cube

dear friends,
i am new to sap bi and could you please solve my problem.
R/3 -
DSO----
CUBE
i had a sales order  full load  ex  A1234  100
                                                    B1453   50
AND NEXT THE SALES ORDER A1234 IS CHANGED TO 200 (R/3  TCODE ME22)
SO NOW WE DO DELTA AND THE DSO HAS
A1234   200(OVERWRITTEN)
B1453    50
BUT IN CUBE I  HAVE  A1234   300 (ADDED INSTEAD 100 SHOULD BE OVER WRITTEN BY 200)
COULD YOU  PLEASE GIVE ME A SOLUTION.
THANKS

Hi there,
You have several options.
The best one is to use delta between DSO and InfoCube. This will make the difference in the InfoCube between the old value 100 and the new one 200, and would give you the right result.
Diogo.

Similar Messages

  • Data transfer from ODS to InfoCube

    How to transfer data from ODS to InfoCube ? Where exactly do I have to create the
    Infopackage or is it auto-generated ?

    Hi,
    If you are using BI 7.0 then do the following:
    Create Transformation from ODS to Cube by right clicking on cube.
    then create DTP in cube and execute it.
    No need to create infopackage again.
    regards,
    Pruthvi R

  • No data loaded from ODS to Cube

    Hi,
    I am trying to do init with data transfer from 0FIAP_O03 to 0FIAP_C03...
    though there is data in the ODS, nothing is loaded to the cube. It just says
    No data available
    Diagnosis
    The data request was a full update.
    In this case, the corresponding table in the source system does not
    contain any data.
    System Response
    Info IDoc received with status 8.
    Procedure
    Check the data basis in the source system.
    Any suggestions?
    Thanks
    Shalini

    Hi
    "Info IDoc received with status 8" implies that there is no data in the source.
    But as you say, that data is there in  the source(ODS), then there is some inconsistency in the data source and you need to replicate the data source and reactivate that.
    IDoc Status 8 signifies that there is no data in the source and its not any error.
    For more info on idocs check the below link
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0087780d-81b0-2a10-eb82-86e1062f1a2d
    Also goto sm58 and clear the idoc there.
    Hope this helps
    Regards
    Shilpa

  • Data loading from ODS to CUBE

    Hi All,
    I have loaded data from ODS to CUBE. now i have requirement to add some fields in the standard cube. so, for testing purpose i have created copy of the original and created transformation . now when i try to load data from ODS it shows me no more data available . while data is already there in ODS.
    now what should i do ? i don't want to delete data from original cube. is there any other way to load data through transformation ?
    Regards,
    Komik Shah

    Hi,
    Check the DTP of old cube n see whether its Delta. If yes then check whether any one of the foll is check:
    1) get delta only once
    2) get data by request.
    If 1 is checked then delta wont come for the second cube as it says to get delta once and delta is already in one of the cube.
    Generally both should be unchecked but can vary as per requirements.
    Now for your new DTP, i dont think it will aloow you to change to FULL.
    If its allowing you to select FULL, then select it and select from acive table.
    try to load and see.
    regds,
    Shashank

  • Updating the last date request from ODS to CUBE

    Dear Friends,
    Please can someone explain me.
    i allways update request from ods to cube, sometime there will be 3 to 4 request in the ods which wont have the Data mart (Tick) and when i update it to the cube. i can only see 1 request which is current date request. i dont know whether the previous days request has been updated to the cube.???
    but i see in the ODS that all the data mart (tick) is available for all the request.
    And  please can someone explain me, if i have many request in the ods, current date previous day and so on.
    Is there any way to update in such a way, where i can see all the dates in the Cube instead of only 1 request with current date in the cube.
    when i delete the request from the cube and remove the tick from the ods, and refresh, then suddenly the current request and all the previous request TICK will be gone...
    Thanks for your help.
    will assign complete points.
    Thank you so so much

    Hi,
    if you know everday how many request are getting updated in infocube as one request the you can check  the added records in infocube .. it should be equal to the sum of all those request ..
    but transferred can be more or equal .. also its depends on the
    update rules ..designing ..
    Hope this helps you ..
    Regards,
    shikha

  • Error in Data updation From ODS TO CUBE

    hello Experts
    We are working on BW 3.5
    for FI GL line items we are loading the data to ODS and than to Cube.
    earlier there was a process chain failure 2 months back so delta were stuck for 2 months now about 10 million records have been uploaded in ODS but when i am tryint to upload these records to CUBE via delta upload  its giving Error
    Value 'Ã
     ABC100711396 ' (hex. 'C30DC2A04C4344313030373131333936 ') of characteristic 0REF_DOC_NO c
    i would like to know how to correct this and from where this error is coming as the same data is loaded to ODS and there its OK and secondly as there is no PSA bw ODS and Cube Do i need to delete the request and upload again
    what if same error appears again should i write a start routine in update rule Between ODS and CUBE for special characters
    thanks for replies

    Hi,
    Goto All Elementary Tests in RSRV
    Goto Master data
    Select the required test
    Select your Infoobject
    Execute the test
    You will get the result with errors or no errors
    If you get errors, then you click "Correct Error" button.
    Regrds,
    Suman

  • Data loads from ODS TO CUBE

    Hi,
       i have delta loads comming into the ODS. i do full update from ODS to the cube by date range for material moments no. last time when i loaded the data, it loaded few for the date range. rest did not load and sitting at ODS. this is full load and tried to load again. any suggestions...
    sp

    Hi Srinivas,
            check your update rules between ODS and cube whether they are mapped properly(check your date range for the cube load).
             Do a Init load and then do the delta load.
    hope this will help.

  • Data Flow from ODS to Cube

    Hi Guys,
    Need a clarification!!! Iam running a full update from an ODs to a Cube. Will the data be picked up from ODs Active Table or Change Log Table.??
    Thanks
    Srinivas

    hi,
    You should do further update from ODS ONLY after "Activate data in ODS"
    This means, the data will be picked from Active table of ODS.
    assign points if useful ***
    Thanks,
    Raj

  • " Query regarding Data transfer from Bi to BO Tool "

    Dear Friends,
                       I am having a query. I have  created a Info-cube and established the universe on the top of the Info-cube.The Dat is coming in the Bi system. When I created a new Webi-report the Data from the ino-cube in the universe is not reflecting the Webi-report .
                         Can anyone tell me the solution for the Data Load in the Webi-report .

    Hi,
    There are two ways to design universe on top of cube/Query.
    1)Olap Universe :Please go through by below link for how to create mdx universe.by this way create one connection and select cube or query and by default designer will replicate cube/query in the universe.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/903a7fc7-19e8-2d10-fa95-b050de946b61?quicklink=index&overridelayout=true
    2) Create Data federator project on top of Cube and then design universe.
    To pull data in the webi report create universe then  select objects and run the query.If data is available in the cube or query that will come in the webi report.
    I have already said webi report pull data at run time.there is no need or no way to load data in the universe or webi.
    Design a universe and create  webi or deski report on top of universe.
    For more information you can search on net can be found documents how to create report.
    Hope this helps you.
    Thanks,
    Amit

  • Regarding data transfer from SAP system to XI

    Hi Experts,
    I have a program in which a file of type XSTRING is sent to SAP Business Connector through a Function module. Now we want that file to be transferred to third party system through XI as interface instead of SAP BC.
    Can anybody suggest what will be the required steps ?
    Also please mention the required things to be done on ABAP part.
    Thanks in adv.,
    Akash

    Hi Gordon,
    We don't have the idoc creation part in our program so it will be better if we can use xstring file only.
    Can you suggest any function modules for data transfer to XI ?
    Thanks,
    Akash

  • Doubt regarding Data transfer from R3 to BW

    Hello Experts,
    I have a basic questions to ask,I am curious to know that how the data is transfered from a
    remote system (let say R3 or CRM) to BW system.Though i know that two systems
    make a RFC connections and make use of idocs.
    But if somebody can through more light on this and help me clear my doubts.
    Also case when the data is transfered with in BW.
    Thanx and Regards
    Priyanka

    Hi,
    Chek in teh follwoing PDF you will get some Idea.
    http://sap-idoc2edi-consulting.com/pdfFiles/EDI_IDoc_Overview.pdf
    https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908836c3-7f97-2b10-4cb8-e6790361c152
    Thanks
    Reddy

  • Regarding Data Transfer from R/3 to BW

    Hai All,
               I am new for BIW. So please can anybody clarify If we want to make any analysis reports in BW we have to take whole data from Item level  i.e.  every thing from R/3 into BW ? Is it mean that we are replicating the total R/3 data into BW ? Please clarify regarding this.

    Hi,
    BI is a analytical system, where we interested to do analysis for our ststegic desicion.Where as R/3 is an operational system which have much more detailed information.
    So the data in BI system have to be much aggregated, rather than replicaing the R/3
    Regards
    Happy Tony

  • Regarding data transfer from third party....

    hi experts,
                 i have some data of PLC ,i have to post it in SAP plz explain me how to do this what are the various steps.....how will i integrate plc with the sap...

    Hi,
    These are some of the ways you can transfer data to SAP
    1. File transfer. ( Flat file or XML or CSV, or XLS)
    2. RFC
    3. BAPI
    4. IDoc
    http://help.sap.com/saphelp_nw04/helpdata/en/c7/eff2280d0511d3a6300060087832f8/content.htm
    a®

  • We have some data loads from ODS to Cube (Deltas)

    Dear Experts,
    We can see request status green in DSO but in cube it is in yellow and not available for reporting (the request got compressed)
    I want to make the status to green and available for reporting but i could'nt do it as i can see some popup message saying the request is already activated and change QM status not possible.
    when i run the delta again that also becomes yellow status due to the previous request's was in yello status.
    please suggest me how to change the status of compressed request and why it is happening.
    Thank you in advance,
    Kiran.

    Hi,
    Chk whether automatic request processing--->Set quality status Ok checked or not?
    It might be in manage of cube, in the menu-->goto options somewhere
    as I was not before the system ...I couln't guide u exactly...
    rgds,
    Edited by: Krishna Rao on Mar 30, 2010 3:47 PM

  • Error in updating data from ODS to CUBE.

    Hi,
    I am tryin to load data manually from ODS to CUBE in NW2004s.
    This is a flat file load from the datasource to the ODS and then from the ODS to the CUBE.
    In the CUBE, I am trying to populate fields by using the ODS fields.
    For eg.
    In the ODS, a CHAR Infoobject has the data in the timestamp format(i.e. mm/dd/yyyy hh:mm ). I need to split this data and assign them to the two individual DATE and TIME Infoobject in the CUBE.
    For this, I have done the coding in the Transfer Structure in the Rule Group.
    The time field is gettin populated , but the date field is not getting populated.
    I get an error as Eg:
    <b>Value '04052007' for CHAR 0DATE is not plausible</b>
    Due to this, the corresponding records is not getting displayed
    Also, the records where the time id displayed, the date is not getting displayed inspite of the date being correct.
    Please help me with a solution for this.
    <b><u><i>REMOVED</i></u></b>
    Thanks In Advance.
    Hitesh Shetty

    Hello Hitesh
    SAP accepts the date format in YYYYMMDD, so in the routine where you have concatenate the day month year...just do it in reverse order.....
    Thanks
    Tripple k

Maybe you are looking for