Regarding datasource i'e., The OLTp source still has errors

Hi experts,
I was getting an error while creating datasource i.e, "The OLTP source still has errors".
Last 2 days onwards i was getting this error. Previously i have created many datasources.Eventhough i was gettign sam error
while doing any changes in existing datasource. Kindly help me out in this issue.
Regards,
Sree.

Anil,
I will explain in detail.
We want to do enhancement for datasources (transaction or Generic datasources...whatever it is).
LBWQ or RSA7 question will not come here...ok....
any time we can do enhancement by adding additional fields to the extract structure(appending..) of trans. or generic or masterdatasource.....
In my case, If i add some fields to the extract structure(appended str.)in source system(r/3- datasource-2lis_13_vditm) and save it. immediatly we are getting message saying that 'OLTP SOURCE ERROR'...
Is there any problems in source system/installation.
Thanks,
Mahantesh
similarly, the same problem will come for all the datasources - enhancment.
how do

Similar Messages

The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present

Hi All,
iam trying to load data from r/3 for the DS 3FI_SL_J2_TT , when i see in BW , the transfer structure is inactive in Dev system. So i activated the transfer struc. but after activation also its shows as inactive.
and also iam getting this error message : "The OLTP source 3FI_SL_J2_TT for source system BM4CLNT100 not present".
I have checked in r/3 side , the DS is available and is in active. I have replicated the DS also in BW. but no luck.
could you please let me know why this error occured.
Thanks,
Ravi.

Hi,
RC on Source system and perform the action check if connection is ok the try to activate that in se38
RS_TRANSTRU_ACTIVATE_ALL.
Regards,
Satya

HT5577 Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect. What do I do?

Okay so I have 2 apple accounts. One is newer & one is my old one. The older one still has money from Itunes on it & when I go to log it will not except my password. Then it asked me my date of birth & it says its incorrect.So I tried to go the email route but i never get anything in my email about recovering my password. What do I do?

Hey donnieandjamie31,
It sounds like you are not getting the email to reset your password. If you have a rescue email setup for your Apple ID, the reset password email will be sent there and not your Apple ID email address:
When you provide a rescue email address, all future security emails, such as password resets from iForgot, will be sent to the address provided.
Rescue email address and how to reset Apple ID security questions
http://support.apple.com/kb/HT5312
You might want to check your other email accounts for the password reset email, including their Spam folders. If you continue to have issues, please contact our Account Security Team:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Why the new iPad still has no Flash

I wonder why the new iPad still has no flash. I love to take photos with my iPhones and iPads, sometimes a flash could be handy when it's dark.
I know it could be another nightmare for the Apple case makers.

Apple has never said why, and rarely does explain decisions like that... my guess is that it would have taken space and power away from something else, it's a pretty tightly-packed product. :-)

I have an app on my phone that has a glitch.i want to get rid of the app so that i can re install it,but when i re istall,it comes from the cloud and still has the glitch. how do i remove an app from my cloud

I have an app that i want to get out of my cloud,can i do this ????? It has a glitch and wont work and when i come to re install, it comes from my cloud along with the glitch. Can anyone help ?

When you tap the iCloud download symbol it's downloading a fresh copy of the app from the App Store, not from your iCloud account. (Your previous purchases aren't stored in your iCloud account, they are stored in the App store and can be redownloaded from there.)
If the app still has a glitch, try contacting the app developer. Perhaps there's a problem with the app running with iOS 7.1.

When using the OData Source I receive error "The remote server returned an error: (403) Forbidden. (System)"

I get this error once I click the "Test Connection" button in the OData Connection manager. I am working against an O365 SharePoint List. I will add that I have this working just fine when running it from my Windows 8 workstation using Visual Studio
2013.
On my Windows 2012 R2 Server, using Visual Studio 2013 is wen I encounter the error so I know I have the connection settings correct. I am going against the same SP list using the same credentials. The only difference is when running on Server
2012 vs. Winodws 8 workstation. I don't know if there are some other security settings that need to be applied.
I will also add that I can access on premise list successfully, I am only having this issue with O365 List.
Any help would be appreciated. Thanks.
Jim

It might be due to the “Microsoft Online Services Authentication” NOT set to true.
See
http://whitepages.unlimitedviz.com/2014/03/using-the-odata-source-connector-with-sharepoint-online-authentication/
Arthur
MyBlog
Twitter

Hi Anil, I was able to compile the Maven test build successfully but still has errors.

Hi Anil, I am not able to compile the Maven test build successfully but still have errors/warning messages. Can you please help me or tell me if I can
processed with the tutorials. Thanks.
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>Maven-Test</groupId>
<artifactId>Maven-Test</artifactId>
<version>0.0.1-SNAPSHOT</version>
<packaging>pom</packaging>
<dependencies>


<dependency>
<groupId>Maven-Test</groupId>
<artifactId>Maven-Test</artifactId>
<version>1.48.16</version>
<scope>system</scope>
<systemPath>C:/dev/hanacloud.sdk/1.48.16</systemPath>
</dependency>


<dependency>
<groupId>Maven-Test</groupId>
<artifactId>Maven-Test</artifactId> (I am getting error here)
<version>1.18.8</version>
<scope>system</scope>
<systemPath>C:/dev/eclipse</systemPath>
</dependency>
</dependencies>
</project>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
[INFO] Scanning for projects...
[WARNING]
[WARNING] Some problems were encountered while building the effective model for Maven-Test:Maven-Test:pom:0.0.1-SNAPSHOT
[WARNING] 'dependencies.dependency.systemPath' for Maven-Test:Maven-Test:jar should use a variable instead of a hard-coded path C:/dev/hanacloud.sdk/1.48.16 @ line 16, column 14
[WARNING] 'dependencies.dependency.systemPath' for Maven-Test:Maven-Test:jar should use a variable instead of a hard-coded path C:/dev/eclipse @ line 25, column 15
[WARNING] 'dependencies.dependency.(groupId:artifactId:type:classifier)' must be unique: Maven-Test:Maven-Test:jar -> version 1.48.16 vs 1.18.8 @ line 20, column 14
[WARNING] 'dependencies.dependency.systemPath' for Maven-Test:Maven-Test:jar refers to a non-existing file C:\dev\eclipse @ line 25, column 15
[WARNING]
[WARNING] It is highly recommended to fix these problems because they threaten the stability of your build.
[WARNING]
[WARNING] For this reason, future Maven versions might no longer support building such malformed projects.
[WARNING]
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building Maven-Test 0.0.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
Downloading: http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom
Downloaded: http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom (5 KB at 4.3 KB/sec)
[INFO]
[INFO] --- maven-clean-plugin:2.4.1:clean (default-clean) @ Maven-Test ---
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3.507s
[INFO] Finished at: Mon Mar 24 02:27:14 EDT 2014
[INFO] Final Memory: 5M/99M
[INFO] ------------------------------------------------------------------------

It's probably best to close thread and that I start a new one. I think that I have gone off on a tangent here. Yes SSIS isn't doing much of a job in reporting errors but my main concern is the error itself.
I am trying to port an SSIS Script Task from SQL 2008 to SQL 2012. Is uses the ReportExecution2005 web service to run SSRS reports. The really strange thing is that, even though the same web reference is used, different methods seem
to be available in SQL 2008 and SQL 2012. This doesn't sound right to me, if you refer to the same Web Service you should see the same metros or am I wrong about that.
For example in SQL 2008 there is ReportExecutionService
object but on the SQL 2012 to service there only seems to be
ReportExecutionServiceSOAPClient.
R Campbell

Im getting errors when i do a mem test on my hp a6000f.....ive replaced the ram and still get errors

im getting errors on mem test, Ive replaced the ram, still get errors. How do I disable the L2 cache....on hp a6000f, I dont see anywhere to do it while im in the BIOS/ CMOS setup
I get error code : BIOME-1

Here is what you should do to trouble shoot your problem.
Open up the composition that is giving you problems
Your error message tells you that you are having problems with the Shatter effect so select the layer with the shatter effect and turn the effect off
Try a ram preview
If the ram preview is successful add a solid to your comp
Copy your shatter effect and paste it to the new solid you created
Turn off all other layers
Try a ram preview
If the ram preview crashes go back to step 6 and reset shatter and try again
If the ram preview is successful start adding the properties from your original shatter effect until you get a crash.
If the ram preview works the first time you try step 6 then there is something wrong with the combination of shatter and the original layer it was applied to so remove shatter from that layer, pre-compose that layer moving all attributes to the new layer then paste the working shatter from the solid to the pre-comp, turn off the solid and try another ram preview.
Do you kind of get the procedure here. When something is causing a crash first isolate that problem, try it on something simple, then try different things until you can reproduce the crash. Make sure you are saving copies of your project so you can easily go back.
If you can't figure out what settings in Shatter are causing the crash then we need to know everything there is to know about your composition and see a screenshot or the project file. If it is the footage that is causing the crash then you need to transcode, recompress, or in some other way change the format of the footage. There is nothing we can surmise from the details you have given us that give us any clue why shatter is crashing. It usually does not. I can't think of the last time it caused a crash for me. The only possible thing I can think of that would be causing a crash is that the number of particles is causing your system to run out of memory.

HT5622 I have a new apple ID how come the App Store still has the old one when verifying a purchase?

How can I fix this. It won't let me update any apps. I recently changed in the iPod but the old one still appears only when asked to verify a purchase

- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Installation failing, giving error code 7, disabled the firewall and anti virus and rebooted the machine. Still getting error code 7. HELP

Can anybody point me in the right direction to resolve error code 7?

Try an alternative link and validate with your 24 digit serial number - click here for PSE downloads

Datasources . problem with the new Source System

Hi friends!
The ECC client were copy and now I have a new source system for this.
If I select source system / verify, the msg is: ok
In can read some data from the new ECC (ie: exchange rates updated), but I can not read any records using the datasources.
The replication in Bi were done, and the data in source system is ok.
-> What is wrong?
Thanks!

Check the profile parameters in WE20,We21... and also check scc4

I had to change my apple id but the icloud account still has the old one. How can i change it.

My apple id was cancelled by apple due to a problem and they suggested me to make a new apple id with a different email adress. Thats what i did, the proble is that the i cloud has the old apple id and i was trying to change it but i cant and the iphone keeps asking me to put de password on the old apple id wich is no longer in use
The second problem is that when i was trying to change that, something happened and all my contacts were erased!
I still have them on my ipad, but i dont know what to do, is all a mess with my devices!
Can somebody help me please?

With iOS 7 you will have to provide the password for the old ID in order to delete the existing account from your iPad. If you can't do this, contact Apple for assistance by going to https://expresslane.apple.com, then click More Produces & Services>Apple ID>iTunes Store, App Store or Mac App Store>Disabled Apple ID.
As far as your missing contacts, when you get the password for the old ID reset, sign in with the ID and your new password at icloud.com and check to see if your contacts are there. If they are, export them as a vCard as explained here: http://support.apple.com/kb/PH3606. You can then import this vCard to your new account as explained here: http://support.apple.com/kb/PH3605.

How can I restore a desktop iCal calendar from an iPad backup copy? The iPad is routinely backed up to the computer and still has the calendar on it but I cannot get it to display on my desktop.

One of several calendars was accidently deleted from the desktop. It is still present on the iPad and backed up to the desktop. Additionally, the iPad version can no longer be edited, copied or moved.

Thanks for confirming my approach.
I have tried your approach. I have a calendar with the most recent and future events; it is visible on all appliances; and, it syncs to the cloud without issue. I think I will wait for a very rainy day to transcribe five years of past events.
BTW, the corrupt calendar cannot be deleted from the iPad using any normal appoach; additionally, the events cannot be edited or modified except as described above. I will follow up with Apple but this calendar predates the iCloud and apparently there are known issues in moving those calendars to the cloud.
I tried restoring the calendar folder from Time Machine. It loaded initially, at least for the month I was watching as it loaded, and then deleted it again. So, the calendar I want to display still exists but is not accessible.
Thanks for your time and help. If I learn any more from Apple, I will pass it along.
Cheers, ...

Is there anyone out there who pre-ordered on the 3rd and still has not received their iPhone???

I pre-ordered on the third and received an email on the fourth saying my phone had shipped. I checked FedEx with the tracking # Verizon provided and I still get the same status that I got on the 4th. It says the order has been "initiated". The next step would be "picked up", but here it is nine days after I pre-ordered and no phone!!! Hasn't even shipped!!!
Is there anyone who is experiencing the same problems???

I have been going back forth with Verizon and UPS and Verizon is blaming UPS and told me it's out of their hands once it ships. UPS is saying they're doing their best to get the package back to NJ where I am. I also tried cancelling my order with Verizon and was told it could not be cancelled because the package has shipped. I was told if I wanted another phone I'd have to pay for it again. No one knows where my phone is UPS says they have misrouted a trailer full of Iphones. I don't know how true that is.

I just downloaded the Firefox 4 version and it doesn't seem any different. I can't find the place that tells me what version of Firefox I now have. The start page still has the download the Firefox 4 now on it. I have Vista OS. Thanks,

I watched the video on Firefox 4, then restarted computer to let the changes taking effect as the update stated. When the computer started again there was no changes and I can't find it in the downloads or file changes as to what edition of firefox I know have.

Do you have an orange Firefox button in the upper left, or do you have the customary menu bar (File, Edit, View, etc.)?
Either way, you can check your current Firefox version using Help > About Firefox.
To switch from having a menu bar to having the orange button, right-click in a blank area after Help and uncheck Menu Bar. Then, to display the menu bar temporarily, you can tap the Alt key or press the F10 key.
Regarding the start page, there must be something just a little bit custom about the address. Otherwise, you would have been changed to '''about:home''' which is the new start page.

Regarding datasource i'e., The OLTp source still has errors

Similar Messages

Maybe you are looking for