Regarding dead stock in MM

HI..
i m an abaper...
i hv to show dead stock and dead stock value in a report for a given period of time here i m using table mbew but in this table only the current stock is given so how will i show it for a period of time suppose from july to dec..should i add some logic for it or can i use another table....how do u calculate dead stock and dead stock value for a given period of time....plz help me
null

Hi
please check this:
http://help.sap.com/saphelp_46c/helpdata/en/bd/a140eb44d511d188fe0000e8322f96/frameset.htm
click on Document Evaluation: Overview
regards
Srinivas

Similar Messages

  • Dead stock report - tables regarding

    hi ,
    i need the name of the table and the key field which used to take the dead stock report.
    i.e. 6 months non moving materials list i want with stock values.
    kindly forward your suggestions.
    Giri

    Hi ,
    The tcode which you have provided is useful.....but  i require the table and the field which required to generate the report....
    My purpose is : basiscally i am generating the list off materials which is not consumed for more than six months..... )
    do we have any table which stores data in the following format required by me ...
    Materialno,plant,stock,last_consumed_date...
    For your information -we  can get this information from  Goods received table and  calculate it....   but this is a time consuming process....  that is why i am looking for a materialwise last consumption date.
    looking forward to your suggestions further

  • Dead stock  or slow moving items reports

    tell me any standard report t.code  for dead stock or slow moving item..?
    actually in our system  mc50 is not working...in selection field it pick only one material ..not by material  group so how i  can get the dead stock report?
    Regards
    Rekha sharma

    pls tell me the input selection field for mc46...
    scope of ranking list
    no. of days up to last consumption from--to--
    actually i fill up 180 days for perios last consumption ...in period to analyze selection field.
    regards
    Rekha sharma

  • Report on  Dead stock and Slow moving stock

    Hi ,
    On of my cleints requirement is to see the list of Dead stock and slow moving stock
    I tried T.COde Mc50 and MC46 but I could not understand the report fully 
    In case of T.code MC50(dead stock) the input criteria for the report is just Plant,Pur org and Sales Org.
    How does system identify an item as dead stock.
    Is there any setting to define an item as dead stock before running report MC50?
    In case of slow moving stock ,i want to see all the material for which no posting
    happened for 60 days.In this case what value I need to select in T.Code MC46
    Thx in advance 
    Deva

    Hi,
    While using MC46 report under Scope of ranking list, select the No. of days up to last consumption as 60 days.
    And execute with the other selection parameters.
    Regards,
    DilliB

  • MC50 - Dead Stock Report

    Good day to all.
    We use the MC50 report to identify obsolete stock. We use a one plant system with various storage locations dispersed throughout the geographical area of our company. The problem we have is that the MC50 report as input parameters requires the plant and cannot be run per storage location, thus identifying obsolete stock per such location.
    We are considering a customization but have been advised that the development will require extensive development as result of the main program having several includes which contain SAP standard function modules.
    We are attempting to establish if there are other SAP users who encountered the same scenario  and if so if there is not perhaps a simplified solution to extract the obsolete stock report per storage location as opposed to plant level.
    Best Regards
    Mike Olwagen
    Manager SAP Solution Support
    City Power Johannesburg (Pty) Ltd

    Hi,
    In this regard to my understanding, we may use BI reports to extract the Dead Stock per storage location.
    The Plant having the SLoc data can be pooled in the BI Interface, wherein selection criteria will be there to select respective SLoc having the Dead Stocks. The tables can be customized according to the requirement of the user in BI reports.
    Regards,
    Dhrubajit

  • Query related to Dead Stock

    Hi,
    What is Dead Stock and How to determine the material, that is it Dead Stock or not???
    If we run the Tcode MC50, it shows the Dead Stock data like: -
    Material...................Short text...................Dead stock value...................% ..................***.%
    10000001................TMT BAR 10MM..................0.00 INR.................0.00 %.................0.00 %
    All the line items are showing like this with diff. materials...What we understand this???
    Please guide and tell me the whole process...
    Regards..

    Hi,
    MC50 looks at the stock level for a material over a period of time and identifies the lowest level that the material reached. That lowest level is the dead stock quantity as, in theory, that stock was not required. It works on the principle that in an ideal world scenario you would maintain zero stock sitting in the warehouse because you were able to plan such that every day you receive / produce the exact amount that you require to meet all customer requirements with no surplus. An example would be that if you met all demand over a 3 month period and the stock level in that time never dropped below 500 then that would be the dead stock level as throughout the period you supposedly could have had 500 less stock and still met all requirements. By taking care of the above points you might have got clarity to detemine the material is under dead stock or not. Thanking you.

  • Dead Stock Report Analysis in MC50

    Hi expert
    i am trying to work om Dead Stock Report. i had Run a Tcode MC50, in the report i have fine following
    MAterial No----
    10000
    Current Stock----
      6,215.327  KG
    Average Stock----
       6,215.327  KG
    Dead Stock----
       6,215.327  KG
    Dead Stock Value-----  17,533,120.07 INR
    Percentage----
    1.95 %
    *** Percentage.-------18.80 %
    i want to verify all that above , data ic showing correct or not
    i have check in material master, i am getting
    Moving price -
    254.93
    Total stock -
    1115.463
    Total Value----
    284364.78
    in MMBE total Stock is showing is 6597
    regard
    nabil

    hi,
    MB51 or mmbe
    sans.

  • Dead stock

    what is the logic of dead stock report that is MC50,
    what is the logic of slow moving  stock report that is MC46,
    and do we have any standard report for fast moving stock as well ?

    Hi Rahul
    Materials that have been consumed little or not at all over a long period of time are referred to as slow-moving items
    Dead stock is the part of your warehouse stock that has not been used for a certain period of time
    for further details pls refer
    link:[http://help.sap.com/saphelp_45b/helpdata/en/c1/376130449a11d188fe0000e8322f96/frameset.htm]
    T code :MC44 for fast moving stocks
    Thnx and Regards
    Vikrant

  • Dead stock and slow moving material

    Hello,
    I need to find out how to get dead stock and slow moving materail manually from tables.(instead of using MC46, & MC50).
    Could you please tell me the logic and tables needed to retrieve this data.
    regards
    Gaurav Maini

    use table mseg and mver
    logic is calculation of frequency of movements
    regadsr

  • "Dead stock" report

    Hi,
    We want to convert some LIS-reports, like "dead stock" and "Inventory turnover" to a BW report. I have activated InfoCube 0IC_C03.
    Does anybody have experience to create a "Dead stock" report in BW(Dead stock is the part of your warehouse stock that has not been used for a certain period of time.)? Which info cube is used?
    Regards,
    Wim

    Hi,
    I Hope, Slow moving materials (0IC_MC01) Multi provider will help you.
    http://help.sap.com/saphelp_bw32/helpdata/en/40/cb051118bd3549a9e39958561fdf8e/frameset.htm
    Re: How to display Fat/Medium/Slow moving materials in Query
    With rgds,
    Anil Kumar Sharma .P
    Kindly Assign the points,If it give you some light
    Message was edited by: Anil Kumar Sharma

  • Stock Analysis : Dead Stock : More than 60 Days.- Report

    Dear SAPians
    Good Evening
    I need a SAP report i want to know if there is a SAP standard report i dontr want to have a Z-Report. My requirement is
    <b>Stock Analysis : Dead Stock : More than 60 Days.</b>Required Fields are
    <b>Item code   Description  S.Loc  Qty   Value.</b>
    Pls ssuggest me .
    Thank You
    with regards
    Moosa Anis
    +91 9922 577 477 / +91 99608 47444

    MC50 or MB5M use for dead stock

  • Slow Moving/Dead Stock Report

    Hi Guys
    BEsides T.COdes MC46 and MC50 what other reports that are available on SAP to give the same information and also their Current Stock Balances
    Vishnu

    Hi,
    Why do you need other reports?
    What is it that these reports cannot provide?
    If we can know what you want from the report we can perhaps suggest options. But these two reports are designed to provide the information relating to slow / dead stock and so they should be very useful?
    Steve B

  • Tcode:MC50  Dead Stock

    Hi,
    When i run this tcode mc50 there is give NO MATERIAL SELECTED.
    As per sap help this tcode does not require any update,it fetch data from database directly.
    what maybe the reason for not getting any result.
    Help .........anyone who had work on this tcode

    Ok...
    tcode MC50
    object to analyze
    plant:(kmls)
    period to analyze
    dead stock in period of time : 01.01.2007 to 01.09.2008
    definition
    no restriction
    when i run got message
    No materials selected
    Message no. LC254

  • Dead stock related problem.

    hi,
    how do we configure dead stock period ?
    n:b--- I'm using the t.code mc50 for display purpose
    thankx
    Aniruddha

    It is by default a 3 months period, backdated from today which is autoamtically pulled into the selection screen of MC50.
    If you want analyze a different period, then you have to overwrite this in the selection screen. No configuration available.

  • 1 year Dead stock

    Hello friends
    Following is my requirement can anyone plz suggest which will be Key figures and Characters. I went thru programme of MC50 but not able to identify how system calculate Dead stock i.e. How dead stock is identified by system
    Requirtement - The value of the key figure is the sum of the minimum Daily Stock Values for all materials in the plant. The minimum Daily Stock Value of a material is calculated over the period of one year before the user selected month (including the selected month)
    Thnx
    Nilesh

    thnx

Maybe you are looking for