Regarding decimals occurs after Me59

Hi All PP gurus,
After creating the Auto STO (ME59) for the month, we encounter certain problems.
Some of the quantities are appearing in decimal, where in the accounting units are in NOS .
The quantities are not appearing as per the std packing norms.
This problem was not appearing till last month.
So please give me some hints its very very urgent....

Hi,
For your Unit of Measeure, please look into the T.Code : CUNI.
Whether any Decimal Places and Decimal Pl. Rounding are maintained?
Regards,
Siva

Similar Messages

TDMS file error occurs after several hours

I have a compiled LabVIEW 2010 SP1 executable running on a Windows 7 PXI computer that is occasionally producing the following error message:
"LabVIEW: LabVIEW could not load the TDMS file component.
The top-level VI <my VI's name> was stopped at unknown on the block diagram of <my VI's name>"
This program is interfacing with equipment under test over a number of PXI cards and ethernet connections. It alters inputs to the system based on script commands, while receiving and displaying outputs. During testing, state changes are sent to a TDMS file. The system can run for hours but will usually produce the above error message... eventually.
The error seems to indicate that a LabVIEW file is missing, but the TDMS files are being created, so I may not be understanding the meaning of the error. Does anyone know what the actual cause(s) of this error message are?

The code writes to the TDMS file using the "TDMS Write" VI from the TDM Streaming Palette. These write VIs are located in 12 different sub VIs in a program loop within my main VI. Every 50ms they execute, service the I/O, and write to the TDMS file if data in the particular sub VI has changed state. Some are writing floating point numbers, most are writing strings. There are about 750 total channels being written. I know that posting the code would be more usefull than describing it, but I think posting the source code would be frowned upon by my company. There are over a hundred custom VIs and external hardware connections that are required to effectively run this code anyway.
Regarding timing, there doesn't seem to be a particular amount of time that has to pass before this issue occurs. I was given a screenshot that shows the error occured after 11 hours of running. I was also told that the same error had occured about 6+ hours into a test once. I can say that this error doesn't seem to occur quickly, as in within the first hour or so. It seems to require long duration tests.

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar b

I am unable to open Calendar on my iMac - this occurred after installing Security Update 2015-002. I don't know if related. A message pops up after several minutes saying Calendar quit unexpectedly (but it never really opens). How do get Calendar back?

Hi Magsrobby,
Welcome to the forum and thanks for posting. I'm really sorry to hear you've had so many problems. I can look into this for you if you wish. Drop me an email with the details. You'll find the "contact us" form in the about me section of my profile. Once I have the details we'll take it from there.
Cheers
David
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

I cant download itunes programme for my samsung rv510 laptop, it says error occurs after I try to instal the 10.7 version? What do I need to do?

I cant download itunes programme for my samsung rv510 laptop, it says error occurs after I try to instal the 10.7 version? What do I need to do?

.dmg.part is not a complete file.. It usually indicates that the entire file has not been downloaded yet. Are you sure you downloaded the entire file? (i recommend updating itunes through  > Software Update
Alternatively, you can download it from here: http://support.apple.com/kb/DL1614

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an Apple I-Tunes software update, but I am not sure. Software or hardware??

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

Shuffle no longer syncs the playlists correctly and I cannot "see" the shuffle at all. There is no "device" folder in the left column. This may have occured after an I-Tunes software update, but I am not sure. Is this likely a software issue or is the shuffle not working correctly?

Whenever firefox is opened, it freezes. This has occurred after I updated adobe reader recently. What's wrong with firefox and what can I do?

Recently firefox will open but then freeze immediatly. This has occurred after I updated adobe reader. I'm not sure if that affected firefox, but the time period fits. Restarting my computer has no effect on firefox.

The Adobe DLM is not required for Adobe products to work. You can uninstall it by opening the Windows Control Panel and selecting Add or Remove Programs. In the list of programs select Adobe DLM (may be listed as Adobe Download Manager) and click on remove.

HT4623 Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

Take pictures, but are not taken to save them in a photo album. This problem occurred after you update to ios 6.0.2. My phone is iPhone 5

That's corrected, they save to your camera roll.

How to get a function to return a value occuring after a character

I need to write a function to return the next value occurring after the ":" character in a column. If multiple values of ":" occurs then the function should return the sum of the next value occurring after each ":" in the column.
For example a rating value of 4:1 would return the value of 1. However, the rating of "5:1:1" should return a value of 1+1 = 2, and 6:2:1 will return of 2+1 = 3.
I have the below function skeletion and trying to figure out how the select statement will compute based on the position of : in the column and add the values and return the value back to function.
Function fn_check_internalrating(p_internalrating IN VARCHAR2)
      RETURN number
IS
    cnumber number;
    cursor c1 is
   select ................................
BEGIN
open c1;
fetch c1 into cnumber;
close c1;
RETURN cnumber;
EXCEPTION
WHEN OTHERS
THEN RETURN NULL;
END;

Hi,
You don't need a cursor: there's no table involved in this function, and no point in using any table.
Here's one way:
CREATE OR REPLACE FUNCTION fn_check_internalrating
(   p_internalrating   IN   VARCHAR2
,   p_delimiter            IN   VARCHAR2     DEFAULT     ':'
RETURN NUMBER
DETERMINISTIC          -- Same input always produces same output
IS
    cnumber     NUMBER     := 0;               -- value to be returned
    pos          PLS_INTEGER := INSTR ( p_internalrating
                                    , p_delimiter
                         );          -- position where delimiter was found
BEGIN
    WHILE pos != 0
    LOOP
        cnumber := cnumber + TO_NUMBER ( SUBSTR ( p_internalrating
                                              , pos + 1
                                     , 1
     pos := INSTR ( p_internalrating
                      , p_delimiter
               , pos + 1
    END LOOP;
    RETURN cnumber;
END fn_check_internalrating;
SHOW ERRORSThis assumes the function is a stand-alone function. If it's part of a package, you don't say CREATE OR REPLACE at the beginning.
Try to make functions generic, so that if a similar (but not identical) situation comes up in 6 months from now, you can use the same function. I'm guessing that somethimes you may want to do the same thing with some character other than ':' before each number, so I added the 2nd (optional) argument p_delimiter. You can call the fucntion with either 1 or 2 arguments.
If an error occurs in a PL/SQL fucntion, an error message (showing the exact location of the error) is displayed, and execution halts. If you use an EXCEPTION sectinn, you lose all that functionality, or have to code it yourself. Only use an EXCEPTION handler when you really have to.
For this function, you may or may not want to. For example, if the character right after a delimiter is not a digit, the call to TO_NUMBER in function will raise "ORA-01722: invalid number". You may want to catch that error in an exception handler, and return 0 or NULL. On the other hand, you may want to test that the character after the delimiter is a digit before calling TO_NUMBER, and not have an EXCEPTION section.
What else could go wrong? Try to think of potential problems and fix them when you first write the function. If you discover an error next year, you'll have to spend a fair amount of time finding the function, and getting acquainted with it again.
What should the function return if p_internalrating is NULL, or doesn't contain any delimiters?
What if there's a number longer than 1 digit after a delimiter, e.g. '6:78:9'?

Difference occurs after PCA Transferred for Accounts Receivable

Hi All,
There is a ticket which says.."Difference occurs after PCA Transferred for Accounts Receivable in month end ".
Can anyone help me in understanding the concept. What exactly does it mean and where do i need to check.
Thanks
Mercy

We were able to trace the reason for the difference.
We checked the difference between FI and PCA and found it is due to old document clearing timing problem.
Since it happened in April and we cannot change in FI , we can only manually adjust in PCA itself.
Thanks,
Mercy

Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

Trying to install CS3 on my Mac from DVD and I get Required Resources are missing. I have run this program for years but this occurred after I rebuilt OSx

I ran the adobe cleaner and that did not help. I then uninstalled norton antivirus. and that solved the problem and I was able to install photoshop cs3. I than reinstalled norton antivirus. My system seems to be fine,

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

My mail sounds are locked and they won't change or go to no sound. This occured after upgrading to is06. Is there a fix ?

I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

I have a mac with os x 10.6.8, should I upgrade it to os x 10.9.is there any problem which can occur after upgrading my os.

It is best to wait till there is a 10.9.1 update as new OS X systems always cause problems to some installations. Better not to risk losing data unless you have a bootable clone that enables you to revert to the original (pre upgrade) state. Haste makes waste.
Check this thread if you wish to see what I am talking about.
https://discussions.apple.com/community/mac_os/os_x_mavericks

Error occurs after I install sps16,

Error occurs after I install sps16, when I am using the My Tasks views, while I clicked on the Edit link to add a document to Attachments of that task, a new window pop up. but this is a blank windows!
how can I sloved this problem?
thanks
regards

I suggest that you search the SAP notes at http://service.sap.com/notes and if there isn't a solution there, send a message to SAP at http://service.sap.com/message. You ay them at lot of money each year for support, you may as well use it.
Paul

Each time my iMac reboots i am prompted to enter my FaceTime password. This just started occurring after the most recent security update.

Each time my iMac reboots I am prompted to enter my FaceTime password. This just started occurring after the most recent security update. When I put my password in the pop up just comes back, if I press cancle it goes away. Any ideas on how to get rid of this annoying popup?

I had the same problem. Try this. Launch FaceTime. Click the toggle to turn it off; or Command-K. Quit. Do a restart, you shouldn't get the popup. You could then turn FaceTime back on if you wish. Either way, the popup should be gone from then on.

Regarding decimals occurs after Me59

Similar Messages

Maybe you are looking for