Regarding Default Tab under settings

Hi All,
In Sap portal - Km Content - Settings - Properties. under Properties The custom tab is not getting enabled. It is locked. How can i enable it. Right now i cant click it.
Can anyone please help me in this issue?
Regards,
Divya

Hi Divya,
There might be some issue with proper Authorization:-
So,
Navigate to portal - Km Content - Settings - Permissions.
under Permissions you can add urself and give the proper permissions or tell the administrator to do the same.
Hope this helps.
Reward points if helpful
Regards,
Shailesh Nagar

Similar Messages

I have two numbers listed in my messages tab under settings. One number is checked(mine) and the other is not(my sons). However when someone sends me a text it goes to both mine and my sons iphones. How do i delete his number from my phone.

I have two numbers listed in my messages tab under settings. One number is checked(mine) and other is not(my sons). However when someone sends me a test it goes to both numbers. Mine and my sons. How do I delete his number so that he no longer received texts intended for me.

The best way is to not share Apple IDs but also make sure under Settings & Messages on both devices that only one phone number is checked.

HT4157 my ipad doesn't have a cellular data tab under settings, how do I add a data plan?

my ipad doesn't have a cellular data tab under settings, how do I add a data plan?

Wi-Fi only iPads cannot receive cellular data nor can they be updated to a cellular iPad.

I don't have a software update tab under settings. How do I find it?

I don't have a software update tab under settings. How do I find it?

Updating needs to be done through iTunes .HT4623 How do I update my iPad?: Apple Support Communities and iTunes 10 for Mac: Update and restore software on iPod, iPhone, or iPad

HT4972 My iPad does not have a software tab under settings. Facebook froze so I deleted it and now cannot get it back bc I do not have iOS 5. I do not want to lose pictures,music and apps...help!

Facebook froze so I deleted it and tried to upload it again but I do not have ios5. My iPad does not have a software tab under settings. Help!

Do you sync with iTunes? If you do, your Facebook app should be in your iTunes library and you can simply sync the old version back to the iPad.
If you want to update your iPad, back up first and sync first and you should have no worries.
You only have the option in Settings if you are already running iOS 5. If you are trying to update the iOS, you have to use iTunes on a computer to update the iPad.
From iOS 4 or lower - Here are the instructions.
http://support.apple.com/kb/HT4972
More instructions here - for all iOS versions.
http://support.apple.com/kb/HT4623
Or you can connect the iPad to the computer, launch iTunes. Select the iPad under the devices heading on the left, click on the Summary tab and then click on Check for Update

My favorite folders not showing up under address bar on safari in my iPad Air. I do have the tab set to on under settings. The folders are still there for me to save to just not visible on safari anymore, help! tried to fix for days. Thanks

My favorite folders not showing up under address bar on safari anymore on my iPad Air.The folders are still there for me to save to just not visible, I do have the tab under settings, safari, set to on to show the favorites, and did reset the iPad, thanks

Quit all apps (Double tap the Home button and swipe the preview page up for each open app) then Reset (Hold the Sleep/Wake & Home buttons until the screen goes black and the Apple logo appears - no data will bee lost)
Make sure you have your Favorites selected properly here: Settings > Safari > Favorites

HT4972 I have an ipad version 3.2.2 and it does not have a software update tab in settings how do I update to ios 5?

I have an ipad version 3.2.2 and it does not have a software update tab under settings, how can I update to ios 5 software?

Connect it to your syncing PC and update using iTunes on the PC. The OTA (over the air & under Settings>General>Software Update) update was introduced with iOS 5.
http://support.apple.com/kb/ht4623 (scroll down to "Update your device using iTunes" about 1/2 way down the page)

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.

Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
Be well...

HT201304 I have no profile tab showing under settings General

I have no profile tab showing under settings>General

Profiles are generally installed by an employer or company to add specific controls on a device - so, there is likely no such control on your device. Do you think there should be?

Default Tab settings in Text:Show Ruler Menu

How can I change the default number of tabs and their positions when using the Text menu in an application developed with Interface Builder and XCode?

In IB, select the NSTextView area, enter some text (a single character seems to do), set the new default tabs with Format:Text:Show Ruler and save the nib file with the new tab defaults.

HT4623 my ipnone does not have a update tab under generall,settings .how do i update my i phone 4

i cant update my phone there is no update tab in settings any one know how to do it ?

autojoe wrote:
... there is no update tab in settings ...
That is only a feature of iOS 5 or later...
If you have iOS 4... See Here...
http://support.apple.com/kb/HT4972
OR...
Connect to iTunes on the computer you usually Sync with and “ Check for Updates “...
If an Update Appears Install it... if not... you are up to date for your particular Device...
See the Using iTunes Section Here...
How to update your iPhone, iPad, or iPod touch

Regarding Default warehouse

Dear all,
I have to set a default warehouse for the sales flow for a particular user only..How to set that.......I tried setting that in the document setting and the user defaults...But it s takin t automatically as the warehouse set at the General settings.
According to my scenario i cannot set the warehouse for the individual items.So kindly suggest me a way for this.....
Regards,
Shyam

Hi,
Check the Note No. : 785901.
Extracts from the Note:
Symptom
The method SAP Business One determines the default warehouse in documents.
Cause
FAQ
Solution
In SAP Business One, the user can set 3 priorities for determining the
default warehouse in documents:
The 3 locations in which the default warehouse can be set are:
1. Administration => General Settings => Items tab page
2. Administration => Definitions => General => Define Users => Defaults => Defaults tab page
3. Inventory => Item Master Data => Inventory Data tab page
The warehouse will appear automatically in documents according to the
following priorities:
1. If an item is defined with a default warehouse in its Item Master Data, this warehouse will be displayed
automatically in sales and purchasing documents.
2. If an item is not defined with a default warehouse in its Item Master Data, SAP Business One will
check if a default warehouse is defined in the Define Users window in the Defaults window (of the user who is currently logged in).
3. If no default warehouse is defined in the User Defaults window, SAP Business One will use the default
warehouse defined in the General Settings window, under the Items tab page.
Kind Regards,
Jitin
SAP Business One Forum Team

When saving documents from word 2013, the save as dialog shows the default path under "other web locations"

it used to be in the gold ole days of sharepoint 2010 and office 2010 that when I created a document in sharepoint and saved it I would get a dialog, like this (see below) I have also attached a screen shot of the 2013 save dialog (when you save
a document for the first time).
I find it strange that the user actually has to select their "Current Folder" and also that it shows in the dialog as "other web locations" Why can't it be like in the 2010 days where it automically selects the correct location
and the user just hits save. And why does the sharepoint location show up as an "other web location". Is there anything that can be done (through office registry settings or another way) to make this less confusing for our users???
now when I do this in office 2013 I get a dialog like this:
krd

Hi kdube,
I test in SharePoint 2013 again, When I created a new document library and created a first document and clicked save as, I got a same dialog with you that "Current Folder" was under "other web locations".
But when I created a second document and from then on, when I clicked save as, I got a same dialog with myself that "Current Folder" was under "SharePoint".
As I have said, Actually, web locations contain Microsoft SkyDrive and SharePoint libraries. Even the default path under "other web locations", it will not affect the Save As function.
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]

Set Default Tab For A Step

We have a system that has been installed at a couple of affiliate sites in Japan and Romania (we've been developing in Australia). It runs on TestStand 4.2 with supporting code written in LabVIEW 8.6 (although the Romanian site uses TS4.2.1 and LV2010). We have numerous custom steps in a types palette file.
One of the sites has complained that when they add some specific steps (custom Numeric Limit Tests, in particular) to a sequence, the tab shown in the Step Settings pane is the "Limits" tab. It would be more convenient and more useful to show the Edit tab (the one that shows the buttons for the Edit sub-steps).
I realise it's just a matter of clicking on the relevant tab. I also realise that once a file is saved, the last-selected tab is shown for each step when it's re-opened. However, the customer is always right, so I need to see if it can be "fixed".
Is there a way of setting the default tab for a custom Numeric Limit Test step to something other than the "Limits" tab?
Help files, Google and the NI pages don't seem to be forthcoming on this issue.
Thanks,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge
Solved!
Go to Solution.

Thanks Rohama,
I will mark the issue as "not fixable" and be done with it.
Regards,
Geoff
Geoff Field, BE, CLAD, MIEAust
Professional geek, amateur stage-levelling gauge

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

My tab default is1.25 which is too big for the A5 document I'm working on, how do I change the default tab so that I don't have to reset each individual line?

Hi Hannah,
Inspector > Text > Tabs Button > Tab Settings > Default Tabs.
To set a tab stop on the go, click in the ruler.
If you can't see the ruler, Menu > View > Show Rulers.
To set tab stops for lines (paragraphs) you have already typed, select those paragraphs and set them all at once.
Also, have a look at Menu > Pages > Preferences > Rulers.
Regards,
Ian.

Regarding Default Tab under settings

Similar Messages

Maybe you are looking for