Regarding Designer Installation

have succesfully installed the Oracle Designer but
in designer's front panel we only have enabled the UTILITIES options (Repository Reports excepted), the rest of them are disabled (MODELLING SYSTEM REQUIREMENTS, GENERATING PRELIMINARY DESIGNS, DESIGNING AND GENERATING).
How to enable these options???

Have you installed a Repository? Have you set up subordinate users and given them access? Read the SCM (Repository)Installation Guide available here (http://otn.oracle.com/docs/products/designer/content.html) from OTN for more information.
Regards
Sue

Similar Messages

BPEL Designer installation for eclipse

How do I get the BPEL designer installation for eclipse, since I cou;dnt find it anywhere, I can download the installation for BPEL Process Manager but not the designer
Thanks
Rasika

that's too bad. I also have wasted some time looking for the eclipse plug in and would have preferred that approach. I've not had good experience with jDeveloper in the past, but even if those issues have been solved, eclipse is a good standard approach that oracle should support

Question regarding the installation of a J2EE 6.40 Add-in

Hi all,
I would like to install a J2EE engine on a test instance of ECC 5.0 and have a few questions regarding the installation...
Do I have to use the MASTER CD to first install the J2EE engine (Support Package 0) and then apply the latest support packages found on the SAP Marketplace?
Or should be able to directly install the J2EE Add-In by using the latest support packages found on the SAP Marketplace?
Best regards,
Xavier Vermaut

Thanks Bhavik for your reply,
That's what I actually thought but I get the following problem... Here's what I wrote into my customer message... I am still waiting for an answer and would like to get this solved ASAP
Dear SAP,
We would like to install the J2EE 6.40 Add-In on our ECC 5.0 instance
(TST) but get the following error message at the very beginning of the
installation
> Cannot find an installed ABAP system, which is a prerequisite for a
> J2EE Add-In installation. The installation cannot continue.
We checked the installation logs (sapinst_dev.log) and found the
following :
> Found these instances:
> sid: MGR, number: 00, name: DVEBMGS00, host: erpqs1a
> sid: TST, number: 10, name: DVEBMGS10, host: erpqs1a
Why does the installation say that it can not find any ABAP systems when
having previously found the 2 different instances running on this
server?
Would this problem be related to the fact that we have two instances on
this server?
Please find hereunder the way we performed this installation :
01) Download of the 4 different parts of SAP J2EE Engine 6.40 SP 10
     (Solaris 10 - Oracle)
     Part I   : SAPINST10_0-20000121.SAR         (Solaris 64)
     Part II : CTRLORA10_0-20000121.SAR         (Solaris 64)
     Part III : J2EERTOS10_0-20000121.SAR        (Solaris 64)
     Part IV : J2EERT10_0-10001982.SAR          (OS Independant)
02) Extract these 4 archives into /install/J2EE_640
03) Check Java Version and Environment Variables
04) Check Solaris Pre-Requisites
05) Adapt "product.xml" as specified in OSS Note 697535 (IGS)
06) Log in as 'root'
07) Set DISPLAY environment Variable
08) Move to the Installation directory
      ( /install/J2EE_640/SAPINST-CD/SAPINST/UNIX/SUNOS_64 )
09) ./sapinst
10) In the 'Welcome to Netweaver Installation' screen, select
      => Dialog Instance Finalization
Any idea how to get this solved?
Best regards,
Xavier Vermaut
Message was edited by: Xavier Vermaut

ODI Lightweight Designer Installation Problem on AIX

Hi guys,
I have installed oracledilwd on OAS 10.1.3.1.0 and encountered a problem while accessing the same.
The installation for ODI 10.1.3.5 has been done on IBM AIX 5.2 and the deployement of oracledilwd.war on the OAS instance.
the master and work repositories have been crated as weel as the data sources.
I have got the metadata navigator working but although the Lightweight designer got successfully deployed the .war file for the same yet when i test the lwd application i am returned "HTTP 500 - Internal server error" and on checking the ascontrol.log file
This is what i get..
*WARN jmx.JMXUserManager _store.319 - Exception received during persist user info.*
com.phaos.ASN1.ASN1FormatException: java.lang.ArrayIndexOutOfBoundsException
at com.phaos.cert.PKCS12Safe.input(PKCS12Safe)
at com.phaos.cert.PKCS12Safe.<init>(PKCS12Safe)
at com.phaos.cert.PKCS12.input(PKCS12)
at com.phaos.cert.PKCS12.<init>(PKCS12)
at oracle.security.pki.OracleKeyStoreSpi.b(OracleKeyStoreSpi)
at oracle.security.pki.OracleSecretStore.setStoreInWallet(OracleSecretStore)
at oracle.security.pki.OracleWallet.setSecretStore(OracleWallet)
at oracle.sysman.ias.studio.jmx.SecureWalletManager.setEntry(SecureWalletManager.java:129)
at oracle.sysman.ias.studio.jmx.JMXUserManager._store(JMXUserManager.java:307)
at oracle.sysman.ias.studio.jmx.JMXUserManager.setCredential(JMXUserManager.java:250)
Can you guys give any insight regards to the same, am not having any clue.
Cheers
Dhrubo
Edited by: Dhrubo C on Aug 28, 2009 8:02 PM

Hi Dhrubo,
May be this is an issue with the JVM(IBM).Check Once.
Thanks,
katukota

BOE XI 3.1 - Universe Designer Installation

Guys,
Is it possible to get the UNIVERSE DESIGNER setup (Package) alone instead of go with BOE full installation package?
I have the BOE installation full package.
Every time i am installing the Designer in below way to my users,
Custom/Expand installation --> Deselect all the client components; Select "Universe Designer" --> Install Designer
I want to make the installation in easy way.
I found that 'Web Intelligence Rich Client" Client Package is available in ALONE as well as in BOE FULL Installation Package.
i can install this 'Web Intelligence Rich Client' in either way.
Thanks in advance.
Regards,
Kiruba v.r.

Hi Simon,
I know this process. Even i am doing the same to my users machine.
But i am looking for 'Universe Designer' individual client package as like 'Web Intelligence Rich Client'.
Note: I am not getting any error message.

Regarding XI installation and Learning

Hi All,
I am very new to XI and i want to get into XI domain.
At present i am actually into SAP-ABAP from 2 years.
As i want to learn XI so i want some suggestions from all you guys familiar with XI.
I have some questions regarding XI.
1. What is the system configuration required for installing XI!
2. Can we get the XI software [Trail versions-Down load] from any web sites!
3. What are the prerequisities for learning XI.
   Like what are the languages we should be familiar
   before for learning XI!
4. Actually what is XI is all about!
5. Can anybody send me good material for XI for me to
   proceed further.
   If anybody having very good material in XI please
   forward the same to :
   My Personnal Mail ID : <b>[email protected]</b>.
I will be very much helpful if any body help me in this regard.
Any help for the same will be appreciated very much.
Looking forward to all you people's help.
Thanks in advance.
Thanks & Regards,
Rayeez.

Hi Shaik,
Follow these steps while installing XI:
1. Windows server or advanced server with latest service patch.
2. IE 6.0 with latest service patch
3. Install Microsoft office and winzip, acrobat
4. Install JDK with version 1.4.2_03 or above with the corresponding JVM
5. Install the SAP GUI 6.20
6. Make sure that you have hard disk space of 10 GB in C drive and 50 GB in the installation drive.
7. Make sure the virtual memory is between 512 and 1594 or above for the installation drive.
8. Copy the dumps of following DVDs into the installation drive.
Installation Master DVD
Installation Export
Additonal Components for SAP BW/SAP XI,SAP MI,SAP KW
SAP Web As Java
9. Start the installation from the DVD dump Installation Master DVD.
10. When installing the ABAP Database the SID of the oracle default database should be different the ABAP database SID.
U can go through the Installtion Guides for Installing XI from http://service.sap.com/instguides (SR1 installation)
u can also refer to service.sap.com/platforms to see the available platform on which XI can be installed. ( Windows/linux/UNIX)
or you can even go through this weblog which clearly talks to you about XI installation
<a href="/people/sap.user72/blog/2005/05/31/my-experience-with-xi-installation-on-fedora-core-3-linux installation</a>
In addition to this installation guide you also need to download the XI configuration guide which is very useful for technical configurations of various adapters and XI system.
At the same place you will also get the XI configuration guide e.g XI30ConfigGuideSPS11.pdf.
U can also download SAP Exchange Infrastructure 3.0 SR1 Installtion Guide from the articles scetion.
ABOUT XI :
If its just that you wanted to know more about sap xi....then the information below should definitely help you.
The best way to learn XI would be to make the maximum use of XI from its forums, weblogs, presentations, etc in SDN.
First I thought I will just give u the basic steps involved in doing any scenario in XI. This is very essential for a beginner.
First of all you would need to define your product, software component, business system and configure the technical landscape in the sld.
You then go on to create the objects in the repository, you import your software component here and then begin your design steps. To import your RFCs n Idocs if you require any before proceeding.
Then under the name space which you want, you go on to define your data types, message types and message interfaces.
Then you do your message mappings where you specify your source and target message types and the relation between them, then you do your interface mapping. If you are using a BPM, you do the integration process.
Once you have this done, you will have to move to the directory, here is where you define how you use the objects and how you configure them to work as a scenario.
You assign your business system to the configuration scenario which you have created, and create the communication channels. Then you go on to configure the receiver determination, interface determination, and the sender and receiver agreements. Once youre done you will have make sure you activate your objects. The exact parameters steps depend on what kind of scenario you are implementing.
You can use sxmb moni or the runtime workbench to monitor the entire scenario which you have done.
Also I would suggest this link on SAP help for any info that you want on XI,
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
Further, this thread deals with everything that is needed for a starter on XI. Do check them out,
JDBC Receiver: exact SQL statement
/message/527697#527697 [original link is broken]
And after you are done with the documentation probably you can go through this scenario,
JDBC Receiver: exact SQL statement
Also check the following threads which might help you a little more,
Learning XI
XI 3.0 Training
In simple words regarding learning XI, there is an abundance of information on SDN and help.sap.com. So I think it will be better for you to search information there rather than me just providing you links.which will just go on and on and on.so I felt it is better for you to go and search so that not only you get information on SAP XI but also explore SDN in its real sense.
Regards,
Abhy

Issue witth the report designer installation

Hi all,
i am having a problem while installing the GUI of the BI 7.0 . after installation some time its showing the installation completed with errors and on 3.x functionalities r available i dont find any option to login to the bex report designer its front end is also not installed.
some time the problem is i am unable to run the query with variable when i run the query its gives the message that the variable is not consistent some thing like this. I dont know what to do.
regards
KK

Add &VARIABLES_CLEAR = FALSE to end of the URL
or Check in your WAD for the following commands and add this command at the bottom as shown below.
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="SET_PROPERTIES"/>
         <param name="TEMPLATE_ID" value=""/>
         <param name="VARIABLES_CLEAR" value=""/>

Dashboard Design Installation issues

Unable to install Dashboard Design on Windows 7 Office 2010. Invalid Keycode INS00140.
Installation package name is 51041024
Keycode is correct
Running as Administrator.
HELP???

Hi,
This is a know issue in Dashboard design 4.0. You can upgrade to SP 02 or try work around mentioned in SAP Note 1587949 - The Product Keycode is not Valid. INS00140
Click [here|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333533383337333933343339%7D.do] for the note.
Hope it helps you.
Regards,
Nikhil Joy

Issue regarding Thin Installer and driver packages

Hello everybody,
I have recently started to work for a new company and have been tasked with creating a new Windows deployment solution.
My company are using Lenovo desktop and laptop and my installation image use Thin Installer to deploy drivers to our workstations during Windows deployment.
I have been having some difficulties getting everything to work and I want to write about it here to hopefully help someone in the same situation as me and call out for better quality control at Lenovo.
Here are the command line I call to start Thin Installer from the local computer:
START /WAIT thininstaller.exe /CM -search A -action INSTALL -repository \\wds\lenovo -noicon -showprogress -IncludeRebootPackages 1,3,4 -noreboot
Hers the issues I have expirienced:
1. Sometimes packages downloaded with Update Retriever will be set to "Reboot type: Forces a reboot" as default. This causes the Thin Installer to reboot reguardless of the -noreboot switch.
Its possible to change reboot type "Requires a reboot" in Update Retriever and than the updates installs fine.
This causes problem with scripted installs where you cannot have the system reboot "out of order".
Updates should never be default "forces a reboot".
2. On my Thinkcenter e93z (10B8) the Intel Displaydriver (v 9.18.10.3220) wont install because the PnPID is not listed in the XML file. (my PnPID is VEN_8086&DEV_041E&SUBSYS_309C17AA (309D17AA is listed tho)). Manualy editing the XML files to include my PnPID solves the problem.
Lenovo should really have better qualitycontrol here.
3. On a t440s machine i have the Synaptics UltraNav Driver (v. 17.0.12.60) wont install automatically with Thin Installer.
This is because the machine i installed failed the "BIOS test" in the XML file of the update package. I manually edited the XML file and replaced the "BIOS TEST" with one from another update that worked on that system and now everything installs automatically and works fine.
Its possible that Lenovo has detected some kind of problem with my BIOS version and the Synaptics driver but everything seems to work fine for me.
I hope this post will help someone in the future
EDIT: Other people have called out some problems with the information provied in this post. You should read the whole thread before making any changes to your systems.
Kind Regards,
2bi

2bi,
Thanks for posting your findings. I will investigate and escalate the missing PnP id issue for the Display Driver issue. We absolutely need to avoid these kinds of escapes.
For you ThinInstaller command line I would recommend not using the -showprogress parameter if you are using in a scripted deployment scenario with something like MDT and/or SCCM. These solutions typically will not allow TI to interact with the desktop during deployment which is what -showprogress will cause.
Also, you are telling TI to include packages that will automatically reboot your system (type 1), requires a reboot which can be delayed (type 3), will shutdown the machine automatically (type 4). We have very few type 4 packages anymore; however we definitely have type 1 and type 3. As sclexman mentioned, the -noreboot will only apply to the type 3 packages which leave the execution of the reboot up to TI. So -noreboot tells TI that even if it installs updates of type 3, it should not reboot when finished.
Changing the Reboot Type value in Update Retriever only changes how TI sees the package and does not alter how the package itself executes. So if a package is designed to always automatically reboot, changing it to type 3 in UR will have no affect. We have recently had a display driver released by Intel that will automatically reboot if the driver installer detects that it is upgrading an older version of the driver. In a clean deployment scenario, the automatic reboot will not happen so in this case it is safe to change the type to type 3.
This leads to another point. All of our content that is available through Update Retriever is also intended for consumption by System Update which is the utility aimed at individual consumers to help them keep their drivers up to date. Therefore this becomes our lowest common denominator that we have to support. This leads to situations that may not be ideal for the deployment scenario. If we had an army of resources we might be able to manage all of our content for both consumers and enterprise deployments; in effect doubling our efforts. Unfortunately this is not the case and we are trying to do the best we can.
Regarding the UltraNav update for T440s, I see that the XML has a _BIOS section under the Dependencies. However it is defined such that any BIOS level will work because the first level listed is a wildcard asterisk (*). This BIOS section is actually included for a completely different solution which also uses the XML. It is not intended to control the targeting of the update for System Update or Thin Installer. Perhaps there was a mistake made initially and the XML was released without the * and has since been fixed.
(from the current UltraNav driver package: )
<_Bios>
<Level>*</Level>
<Level>GGET*</Level>
<Level>GFET*</Level>
<Level>GHET*</Level>
<Level>GIET*</Level>
<Level>GJET*</Level>
<Level>GLET*</Level>
<Level>GMET*</Level>
<Level>GNET*</Level>
<Level>GRET*</Level>
</_Bios>

INSTALLING IN DESIGN - installation failed

Hello,
I'm trying to install the In Design, but the installation failed. Appears this message:
THE INSTALLATION FAILED.
UNABLE TO EXTRACT TO TEMP DIRECTORY. PLEASE CONTACT CUSTOMER SUPPORT (EX11)
Please tell me something about this matter,
Best regards,
Filipa

I've moved your question to the Downloading, Installing and Setting Up forum where there are members of Adobe staff monitoring this sort of question, but I suspect this is a problem with not having write permission on the folder.

HELP ME WITH DESIGNER INSTALLATION

Hi,
It's possible install Designer and Repository in a same box with WinXP Professional???
Thanks and regards from Ecuador,
Wilson

Dear Wilson,
Yes, it is possible as I installed Designer and the Repository (DS 9i Release 2) both on Windows XP Professional and on the same computer.
Beware that the Repository installation takes significant space, so you need to ensure that the various data file are large enough. For example, I required about 300 MB of space for the temporary tables associated with the SCM.
Good luck!
Regards,
Randy

Problems with designer installation

When installing designer I get the following
error message
netc80.map(0) - FILE NOT FOUND while
activating netc80 mapping
and the installation would not go on.
Does anybody know ?
null

Hi again,
I have just posted an answer to my problem on a "more like this" discussion that I found on Apple Support Communities. So far I have managed to install iTunes and QuickTime in the way b noir suggests on this post.
It is early days but so far so good.
Uninstalling iTunes/Quicktime "The feature you are trying to use is on..."

SAP Integration Kit doesnu00B4t see Universe Designer Installation

I installed BOE Enterprise Client Tools XI 3.1 on my machine and updated to most current SP and FP.
When I want to install SAP Integration Kit, I get the message "No Crystal Reports or Universe Designer found".
What can be the issue?
Edited by: B.Wegner on Nov 18, 2010 10:47 AM

Hi
Here what i mean was
first install BOE 3.1
Then SAP IK 3.1
Now install BOE 3.1 Latest SP/FP
Then Install SAPIK 3.1 Latest SP/FP
Regards
Ashwini

Regarding XI Installation Content

Hi Experts,
Please Let Me Know What Are The Requirements To Install The XI On My PC....
1.....About What Software CD's I Need to have?????
2.....About System Requirements.......
Here I heard that Windows 2003 Server in Required OS
But in my PC i have XP OS ..........Is it is OK To Install the XI on My PC???????
3....How Wil Be the Process Of Installation......First which S/W I Need to Install ..??
Please Let Me Know All the Above Mentioned Questions.........
Regards
Khanna

HI
follow this thread
XI installation
Entire information is given in this guide-
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/95d7d490-0301-0010-ce93-c58f9a3cde0b
and all details available at - https://websmp205.sap-ag.de/instguides -->SAP NetWeaver
null

Regarding XI Installation Files

Hi Experts,
Any body Please Send the XI Installation Files..................
It would be a Great Help to Me.
Please Help me in this.....
Regards
Sesh

hi
see the below links to install.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken] [original link is broken]
SAP NetWeaver 2004s ABAP Trial Version (incl. Web Dynpro ABAP)
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
https://www.sdn.sap.com/irj/sdn/downloads -NW Download trail version
reward points if helpful
regards
sreeni

Regarding Designer Installation

Similar Messages

Maybe you are looking for