Regarding Drill Down Reporting

Hai guys,
could you please confirm what is the transaction for Drill down reporting tool.
Expecting your reply.
thanks.
Ambichan
Message was edited by: ambi chan

Here we go
KE80 /KE81 /KE82 /KE84 .
If helpful pl reward.
Cheers.

Similar Messages

Regarding Drill Down Reports...

Hi everybody,
I am doing a drill down for process order.For that i am doing the following code.
FORM USER_COMMAND USING UCOMM LIKE SY-UCOMM SELFIELD TYPE SLIS_SELFIELD.
READ TABLE ITAB_CAUFVD_D INDEX SELFIELD-TABINDEX.
CASE SELFIELD-SEL_TAB_FIELD.
    WHEN 'ITAB_CAUFVD_D-AUFNR1'.
      SET PARAMETER ID 'ANR' FIELD ITAB_CAUFVD_D-AUFNR1.
      CALL TRANSACTION 'COR3' AND SKIP FIRST SCREEN.
ENDCASE.
ENDFORM.
The problem that i face is : only when i log in to the client & when i run the report for the first time, the drill down is working fine.Otherwise it is not working.Only the first no is coming again & again when i click the other nos.
Regards,
Varadharajan.S

Ok... What is wrong is these 2 statements --
CASE SELFIELD-SEL_TAB_FIELD.
WHEN 'ITAB_CAUFVD_D-AUFNR1'.
I suppose u are doing so to make sure that the user has clicked on Order No field.
If you see in the debug mode and press F5 on CASE Statement you will know the answer.
Instead u must do this --
case selfield-fieldname.
when 'AUFNR'.
It will work fine. I have tried this.
Hope this helps... If it does plz reward points.
Message was edited by:
        Varun Verma

Drill Down Report in screen painter

Hi Experts,
I have a requirement in dialog programming/screen painter to create a 2 level drill down report. for eac page of the report, it should only contain 10 entries then to view the other entries (11 and up), the button for next page should be click (there is also back button).
First question is how will I have the drill down report (alv list type?) in screen painter?
Second question is how should I process the logic mentioned above (next and back) in screen painter/dialog programming?
Thanks in advance for all teh support. Points will be rewarded.
Cheers,
Kurtt

Hai,
Go thru this Threads u ll get an idea,
Drill down report help
Re: regarding Drill Down Reporting
drill down capabilities for an alv grid display field using oops concept
Regards,
Padmam.

Drill-Down Report Printing Problem for Selection Parameters

Dear Experts,
Have tried to configure Drill-Down Report for Vendor Balances,
Am having trouble when printing this drill-down report, Printing is coming OK but it comes with ALL selection parameters, for e.g, have entered 20 vendor codes for the balance display, system first prints all selection parameters and then it prints the output of vendor balances,
User does not want selection Parameters to be printed with the Report Output. Please find below screenshot for the problem.
Input Parameter Screen
Report Output Screen
Print Preview Screen (First Page - Selection Parameters)
Your help is much appreciated, if anyone can guide me, how to switch off selection parameters from Print Output of Drill-Down Report
Thanks
Regards
P

Hello Ms. Preeti,
Thanks for your reply, Have designed the report through FKI0 (FKI*)
Have already looked these setting, but these are not helping really, PFB screenshot for settings am having in my system, if you have any idea which can avoid User Input Parameters from printing then it will be really great help
Thanks for your help
Kind Regards
P

Customized drill-down report cannot go to line item level (FGI4 and FGI1)

Hi Expert,
I created a customized drill-down report using New GL features, as follows:
FGI4 create form, with reference to form: 0SAPBLNCE-01
FGI1 create report for the form created.
After that I set some things like characteristic, variables, and output type.
When I execute the report, the data shown cannot be drill-down to line item level:
Goto > Line Item (this function is disabled).
Kindly advise why I cannot goto line item level, where I copy from standard form: 0SAPBLNCE-01, which ha sthe features of drill-down to line item level.
Thanks
sbmel

Hi sbmel,
For calling up a line item report in a drill down report you need to make the below settins:-
- You first have to generate the line item report with program RGRGENSI for your summary table.
- Then assign the generated line item report to the summary report.
Assiging the report is part of the 'Change drilldown report' function, which you reach by activating the characteristic selection field and then Extras -> Report assignment.
In the dialog box that appears, choose the 'Other report type' function and insert the line item report generated earlier, as an ABAP report
Regards,
Gaurav
Edited by: gka2707 on Jul 19, 2010 8:07 AM

How can I activate drill down report for planned line items please urgent?

Hi Everyone,
Please suggest me how can i activate drill down report for planned line items in internal orders. S_ALR_87012993. Please suggest me, I'll award full points. I am unable to do it in client system, which has already line items. I tried in my sys with new config it is working.
Kind regards
Arvey.

Hi
It is based on the reports attached in the Report Group - TCODE: GR53
In the Report Group screen
Press CONFIGURE This is to attach any Drill Down reports.
Press the Insert Line icon
As is the screen may be used to insert a Report Writer report group. To add an ABAP, press other report type
Double click on ABAP Reports
Enter the name of the ABAP and ENTER
<b>RCOPCA08 Profit Center: Plan Line Items</b>
VVR

Parameter Problem with Drill down reports

Hi,
I have created a drill down report.
I have a master report which list all the employee names and a detail report which list the contact details for each employee selected.
The URL looks like this http://webser/dev60cgi/rwcgi60.exe?detail&p_empid = 1200
detail is a kepmapping entry in cgicmd
this does not work and the detail report does not get the p_empid value.
Now if i enter the compelete url like http://webser/dev60cgi/rwcgi60.exe?server=rep_ss&report=det.rdf......
it works.
Any suggestions !
Thanks,
Shailesh
null

Hi,
I got this resolved by using javascript and doing explicit form submit. As our information is highly secured we don't want the users to see any of the URL links from href, browser or from view source.
I got the first two resolved but when i do a view source i could se in header sections of html view souce the follwing code
<head>
< base href="http://webser.../522222.htm>
</head>
is there any way using reports i can hide this.
Any help, suggestions or reference will be highly apprecaited.
Thanks,
Shailesh
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by the oracle reports team:
hello,
did you specify the token %* in the CGICMD.DAT file so additional parameters are picked up from the URL ?
regards,
the oracle reports team<HR></BLOCKQUOTE>
null

Problem with Drill down reports demo

Hi,
Did somebody successfully installed the
drill down demo. I am not able to get the results here getting some javascript error
"object expected".
I have created a schema,
also the cgicmd.dat report variables
attahced the rep_util file.
I could see the invoices report and the product link displays
javascript:opendetailwin('http:/myserver/dev60cgi/rwcgi60.exe?item+101863')
when i clik on the above link i get object expected error.
The Javascript on view source page looks like this
<script language="JavaScript">

</SCRIPT>
any help will be higly appreciated. Also is there any other way of implementing drill down reports on web.
Thanks in advance,
Shailesh

Hello,
Try making your hyperlink in the master report look like this:
http://webserver/dev60cgi/rwcgi60.exe?detail+p_contactid=&<contact_id1>
The &<column_name> reference in a hyperlink will tell Reports to substitute the current value of that column in the resultant string.
Regards,
The Oracle Reports Team --skw

REPORT PAINTER DRILL DOWN REPORT

Hi,
i need to develop report painter report with drill down for cost elments and month wise
out should be cost elements and all months
Please suggest how to use drill down
Thanks and Regards
RAVi

Along these same lines. I have a user that cannot drill down into a drill down report. Let me clarify. This report does have drill down capability as some people can drill down into it but others cannot. If a user has authorization to run a report via GRR3. When they click on an item to drill down they do not get an authorization error statement, all they get is a statment that says "list contains no data". Any ideas why some can drill down and some can't? Thanks
Mark

FSI0 - Drill Down Reports for Account Balance Analysis

Any orientation on this issue will be greatly appreciated.
These are the steps I did to create a new Drill-Down Report for my customer.
1. Created and modified a new Form based on the Form for the Financial Statement Analysis 0SAPBLNCE-04 (Periodic Actual vs Actual) using Transaction FSI4 (Create) and FSI5 (Change)
2. Created and modified a new Report with reference to the Form I just created using transactions FSI1 (Create) and FSI2 (Change)
3. I select "Expand: Completely" to see all Account Balances
3. All the totals match between the Original Standard Report and the new report I just created.
4. On both reports, when I select a Balance and then select the GOTO \ Line Items to get the list of documents I get the following results:
==> Most of the cases (I would say probably 80% of the cases) the Account Balance I selected matches with the Total of Line Items that is displayed when I do the GOTO \ Line Items
==> In some cases (just a few) the Account Balance does not match at all with the totals of Line Items that is displayed when I do the GOTO \ Line Items
Can somebody explain why ? Shouldn't the totals match all the time since I am specifically selecting a balance to see all its line items? Where are the missing line items?
Since these are just a few cases my customer is okay with it but he would like to hear a logic explanation why the Account Balance and its line items do not match on this report.

Hello,
There is a possibility that you have activate line item display for some of the accounts at a later stage. Meaning that earlier postings were not be shown for the earlier postings but only totals will be made available. Therefore, obviously there is bound to be difference between line item report and totals report.
You need to identify which accounts are being changed with line item display at a later stage.
In case if you forget to keep GL Line item display for an account, but the posting are already made the following steps you would required to get the line item display retrospectively.
1. Note that you are NOT required to make the balance of that GL account to ZERO. Please do not confuse with Open Item Management.
2. Put the check box line item display for the account in FS00. Make sure you are entering right company code.
3. Block the account for posting in COA Segment and Company Code Segment in FS00
4. Go to SA38 and run program RFSEPA01 (Give correct GL Account and Company Code)
5. Now, remove the block you kept on the GL Account in FS00.
This will reset the line item display retrospectively.
Hope this will solve your problem.
Regards,
Ravi

Drill Down Report through Report Painter

Dear All
I am looking solution for Drill Down Reporting through Report Painter.
Kindly Help me for the same.
Thanks in Advance
Alok

Hi Alok,
All the report writer reports and report painter reports will have the ability of drill down. You can create a report using T Code GRR1 and GR31. Create a report group T Code GR51 and assign the report to the report group. Generate the report group using T code GR55. One the report is executed double clik on any line item, the system will take you to the drill down options.
Regards
Sridhar

IS it possible to save drill down report in a html file?

Hi all,
My client is looking for a html file of a drill down report. Is it possible to save the report in html format with the drill down feature in it? Please help.
Thanks,
Karthick

HI imansyah,
Can you try doing what you want in first instance and then try posting your problem you face.
Regards
Rana

How to run drill down reports

now i am using 9ids
Before dev 2.1 was used.
now before we had provision to run drill reports
by putting a button on report
and using
srw.run_report(); procedure ,in button action trigger.
now in 9i what i observed there is no object button in reports.
button has changed to text item and there is no such action trigger.
how to run the report
as reports are run from form by using
web.show_document
pls suggest.

Hi Rajendra,
Again prasanth here, As u said, there is no more push button in 9i and 10g, ok. so u can drill down reports by using hyperliks which is only way(according to me). some may suggest to include JSP buttons. But u can simply place any text item like 'click here to run report' and in the property inspector(i.e.property pallette) set the hyper link property with the desination of your file. It may be a weblink or may be local file path.
example
hyperlink: www.oracle.com/..or
c:\temp\test.rdf
or u can write a trigger for that text item:
1)right clik the text item
2)goto pl/sql editor
3)put the code
a varchar(30);
begin
a:=srw_run_report('<the report link you want')
return(a);
but before doing this make sure that the item type of tha t text item property should be pl/sql(this can be set in property pallete of that text item)
I think this help you,
Thanks and Regards
Prasanth A.S.

Total Label in Drill down reports

This is a simple case scenario. I created one drill down report by Country --> State --> City and set this object as section. It has revenue Column in it. Now I did Summation on the Revenue column and it shows like this
USA -- (Section)
Column1, Column2
XXX, 3
Sum, 3
Now instead of Sum, I would like the label to replace it with country name and when I drill down to second level, it should replace it with the State name and again on level 3 replace it with City name.
Could anyone help me on achieving this. Is it doable? I have been trying to achieve this but had no success.
Thanks for your help in advance.
Rids

Yes, It can be achieved with the help of the DrillFilters() function.
You can build the logic using if-else condition. Here is the one for you:
=If(Drillfilters([City])<>"") Then [City] Else If(Drillfilters([State])<>"") Then [State] Else If(Drillfilters([Country])<>"")
Then [Country]
Regards,
Rohit

Report painter and drill down reports

Hi SAP gurus,
Can any froward configuration of report painter and drill down reports.
iassign points

Hiii Sai Krishna,
can u forward the same documentation to me..plsss
my mail id - [email protected]
thanks in advance
regards
ramki

Regarding Drill Down Reporting

Similar Messages

Maybe you are looking for