Regarding DST changes

Hi
Can anyone give a link to already discussed topic i.e. about DST changes in this forum?
If not can some expert put on their views on DST changes.
In brief if I apply Patches for latest changes in DST....then I have some queries..
1. How can I uninstall if required, the applied patch
2. How can I test the applied Patch.
Regards
JC

I hope you can find the infor about DST in the below posts given in URL
http://forums.oracle.com/forums/search.jspa?threadID=&q=DST&objID=c84&dateRange=all&userID=&numResults=15&rankBy=10001
Regards,
Sabdar Syed,
http://sabdarsyed.blogspot.com/

Similar Messages

  • Oracle WebLogic Server (WLS), Time Zones, and DayLight Saving Time (DST) Changes

    Hello,
    We are approaching this time of the year again...
    I would like to redirect you to the Support Note 1370083.1 "Oracle WebLogic Server (WLS), Time Zones, and DayLight Saving Time (DST) Changes"
    This note lists what is to be expected from WebLogic Server regarding this time change period, in terms of behavior, both for the engine and the applications deployed onto WLS.
    Regards,
    Patrick.

    Probably this:
    http://www.jdocs.com/castor/0.9.5.3/api/org/exolab/castor/xml/handlers/DateFieldHandler.html

  • Need help to manage DST change in ICM

    Hi
    We have call centers in all regions and central controller is located in Europe with CET timezone .Do we have any option to manage DST change without modifying Routing script every time/
    If we create admin script to store time with DST change to memory variable  and check that variable's value in routing script , does it work?
    Please share if anyone have better idea to fix this  .
    Regards
    Renni john

    We are looking for a better solution to this as well. Our routers are in California and we have call centers in Europe. The DST issue is compounded by the fact that the two continents observe DST changover on different dates.
    Right now we create admin scripts with four different time checks:
    1) When both are on Standard Time
    2) When the US has changed to DST but Europe has not
    3) When both are on DST
    4) When the US has moved back to Standard Time and Europe has not.
    These scripts are monstrosities and require a lot of maintenance because DST dates change every year. It also creates more possible points of failure (or human error). We would like to have "TimeZone" switch that establishes a time zone for the admin script. I saw somewhere that UCCX has this. Why not UCCE?

  • Question regarding  to changing the region of the app with remaining balance

    Question regarding  to changing the region of the app with remaining balance
    Hello, I am attempting to change the location of my app store which has remaining balance of 0.01$. In order to change the location of the store, it requires  spending all the remaining  balance. As my balance is too low " 0.01$" to buy an app from the store, I am not able to change the region of my app store. Moreover, Since I am not a residence in USA, I am not able to use my credit card either.
    I am wondering if it is possible to change the location of my app store with a remaining balance OR  to delete my current balance.
    Thanks
    Nejem 

    Click here and request assistance.
    (85511)

  • Why did DST change fail on iPad but work on iPhone?

    I have an iPhone 4S and an iPad 4, both running 8.1.  Both devices are on AT&T data plans and seem to be working just fine except for this one annoying difference. I was in Central TZ (Austin, TX) during the DST change over but am now back in EST.
    My iPhone saw the change immediately and corrected itself to the proper DST time.  My iPad still is an hour off and continues to ignore the DST change.  Both devices have been on multiple cell networks across TX, NC and VA as well as multiple wireless networks during that time.  Phone is right, iPad is not.

    You know ... when one goes through the support documents and other users' suggestions ... and one still can't find a solution, you've always got APPLE SUPPORT. That's what they're there for ... :-) ...
    Apple Support
    http://www.apple.com/support/
    Apple Retail Store - Genius Bar
    http://www.apple.com/retail/geniusbar/
    Contacting Apple
    http://www.apple.com/contact/

  • Certain scheduled tasks do not run anymore after DST change

    Hi everyone,
    I noticed a problem on Server 2012 after daylight savings time was set effective last weekend in March. All scheduled tasks that are configured to run weekly on Monday through Friday don't run anymore! Tasks that are configured to run daily are OK. Shall
    I really put a wrapper script around the executable to check the weekday myself??? Another solution to work around this bug seems to be to set the start day after DST change day, then the weekly Jobs also run OK again.
    Many Greetings
    Michael

    We have experienced the same issues.  Just to put some more information out there (and confirm some points from above):
    We run 12 scheduled tasks on 2 servers.
    Machines are "Microsoft Windows Server 2012 Standard", ver. 6.2.9200 build 9200, HP ProLiant BL460c Gen8
    4 scheduled tasks did fine over the DST switch in March
    8 scheduled tasks failed to run
    All scheduled tasks that ran were set up with
    “Configure For” = “Windows Server 2012”
    All scheduled tasks that failed were set up with
    “Configure For” = “Windows Vista™, Windows Server™
    2008”.
    All scheduled tasks, both affected and unaffected, were scheduled as Weekly, Mon-Fri.
    Changing the "Configure For" field after the tasks failed to run did NOT fix the problem.
    Changing the time of a task after the task failed to run did NOT fix the problem
    Changing the "Start" date of a task after it failed to run DID fix the problem.
    Given that there are not a whole ton more complaints out on the web about this bug, it must be that the bug does not affect every instance of the scheduler on Windows Server 2012.  In other words, it must be only some particular configuration
    of Windows Server 2012 that causes this bug, otherwise surely there would be many many more complaints.  Can people who are experiencing this bug check and post configuration info so perhaps we can determine a common factor?  Thanks.

  • HT4910 i have lost my icloud account password and i have tried a lot to get back my password through i forgot but i have not recieved any mail to my id regarding the change of password

    i have lost my icloud account password and i have tried a lot to get back my password through i forgot but i have not recieved any mail to my id regarding the change of password

    Check your spam mail. If you have more than one email address verified with that apple id that email will go to the rescue email.
    About the rescue email address
    http://support.apple.com/kb/HT5312

  • Day of DST change

    Hi,
    is there an easy way to tell what date the DST change for any given TimeZone will occure?
    Thanks,
    Olav

    Depends what you mean by "easy". I would create a GregorianCalendar object and run a loop that adds one day to it and then checks if 24 hours were added. If 23 or 25 hours were added instead, there you are.

  • Solaris 8 United states DST changes - patch 109809-03 and 108993-56

    Setup:
    - I am using solaris 8 server
    - I edited /etc/TIMEZONE to include TZ=US/Pacific
    - I installed patches 109809-03 and 108993-56
    - Rebooted the server
    To test if the new DST chanages for year 2007:
    - I set up time to DST start time. I get the expected behavior (spring forward) as shown below:
    # date .57;while [ 1 ]; do date; sleep 1; done
    Sun Mar 11 01:59:57 PST 2007
    Sun Mar 11 01:59:58 PST 2007
    Sun Mar 11 01:59:59 PST 2007
    Sun Mar 11 03:00:00 PDT 2007
    Sun Mar 11 03:00:01 PDT 2007
    - I setup the time to DST end time (fall back) and I do not see time changing back to 1:00 am at 2:00 am
    # date .57;while [ 1 ]; do date; sleep 1; done
    Sun Nov 4 01:59:57 PST 2007
    Sun Nov 4 01:59:58 PST 2007
    Sun Nov 4 01:59:59 PST 2007
    Sun Nov 4 02:00:00 PST 2007
    Sun Nov 4 02:00:01 PST 2007
    Any pointers on why the time is not rolled back when DST ends?
    Regards,
    S
    Message was edited by:
    srini30005

    Darren thanks for the reply... I am not sure I understood your comments.
    Setup:
    - I am using solaris 8 server
    - I edited /etc/TIMEZONE to include TZ=US/Pacific
    - I installed patches 109809-03 and 108993-56
    - Rebooted the server
    To test if the new DST chanages for year 2007:
    - I set up time to DST start time. I get theexpected
    behavior (spring forward) as shown below:There are probably better ways to test then than
    actually changing the time on the machine.What do you mean there are better ways to test and how do I do that?
    >
    - I setup the time to DST end time (fall back) andI
    do not see time changing back to 1:00 am at 2:00am
    # date .57;while [ 1 ]; do date; sleep 1; done
    Sun Nov 4 01:59:57 PST 2007
    Sun Nov 4 01:59:58 PST 2007
    Sun Nov 4 01:59:59 PST 2007
    Sun Nov 4 02:00:00 PST 2007
    Sun Nov 4 02:00:01 PST 2007Note that all these are reporting in PST. So this is
    approximately one hour after the transition.
    Any pointers on why the time is not rolled backwhen
    DST ends?Already was.I again do not understand what "Already was" means. I expect after 1:59, the time to be printed as 1:00 am.
    Am I missing some thing?
    BTW my previous post had a problem. To test DST I set the time by running:
    date 031101592007.57
    For end of DST I set the command:
    date 110401592007.57
    >
    Darren

  • Issue regarding to change taxcode in tab Gl-account for T.cod MIR7

    Hi Expert,
    I have issue regarding Tax code in Tab Gl-account for t.cod MIR7 which come by-default , i wan to change that taxcode based on purchase order number which also have tax code with multiple line item in tab PO Refrence,,i want first taxcode of tab PO Refrence to be copied in first line item of tab GL-account  based on po number ,can anyone put a light on this issue with priority..
    Regard's,
    shaikh khalid.

    Hi,
    You can clear the old items posted in 28000 with the other leg in suspense / clearing GL Account.
    Once the above is done, please post once again to Vendor clearing the suspense / clearing account.
    Ensure that the suspense / clearing account does not have any open items.
    The lines are transfered to new recon account.
    Hope this helps, if yes, please assign points.
    Regards,
    Sankar

  • Regarding function changes in sap backend system

    Hi Team,
    I would like to check if we can alter functions and its actions/permissions in SAP back end and transport it across landscape.
    This is needed as we customize the rule set and its difficult to validate the risk analysis changes directly in production when its made via nwbc.
    Thanks in advance.
    Regards,
    Anil

    Hi Anil
    If you maintain a Function definition then you are updating those tables (Function to Action (transactions) and Function to Permission (Authorisations) tables). So the answer is YES
    If you are asking if you should maintain directly in Production Vs Transport then the answer would be DEPENDS - what is your company process
    If you are asking if you can maintain the SAP delivered rule set (activate via BC SETS) then the answer is DEPENDS. Again, it comes back to your company business process. You would then need to consider how you manage any future recommendations from SAP if they update their rule sets
    But again, those tables is where you store function definitions so of course you can maintain them.
    Regards
    Colleen

  • Regarding attribute change runs in process chains

    Hi All,
    While creating process chain for master data objects. I am trying to incorporate attribute change run process type for an info object. But the system asks for the DTP of the attribute and when i choose the DTP then both DTP and then Attribute are being incorporated. This is not exactly a problem but i need to understand why it is happening as i am already using that DTP to load data. Will this affect the data in master data object?. Thanks in advance.
    regards
    satish

    Hi Bhagyarekha,
    The reason behind that error could be:
    An attempt is made to activate a characteristic whose compounding was replaced and whose navigation attributes were simultaneously deleted. The replacement of the compounding temporarily deletes the M view of the characteristic during internal activation. The process of deleting navigation attributes involves converting the attribute SID tables. However, the M-view of the characteristic, which has just been deleted, is needed for this conversion.
    Check this SAP Note:
    Note 684405 - Replacing the compounding and deleting navigation attr.
    Hope it helps.
    Veerendra.

  • Oracle 9i patch for new DST changes

    For oracle 9i is there any patch available to take care DST 2007 changes?
    How oracle get the current date?
    Is oracle depending on Operating System?

    Patch is not yet released. You can check the bugs listed in this note in Metalink : Note:359145.1

  • Tasks Run 1 Hour Late after DST Change

    I'm running Apple Remote Desktop 3.1 on an iMac to control 52 other iMacs. I have about 30 scheduled tasks that run throughout the week.
    Since the Daylight Saving Time change, all of the tasks run an hour late.
    All of the computers (admin and client) are running Mac OS X 10.4.9 and have the DST update installed. All computer clocks are set to the correct time and the correct time zone (MDT) and are set via Apple's server. I have verified and even rescheduled the time on most of the tasks, yet they continue to execute one hour behind schedule.
    Anyone have a fix?
    PowerBook G4 Ultimate 15"   Mac OS X (10.4.9)   Palm Treo 650, Product (red) iPod nano

    I thought the same thing about January - I have a few daily tasks that originated in January of this year. However, even after repeatedly resetting the time - and date - my tasks are still an hour off. I just tested one: while my ARD admin machine's clock read 4:15pm I tried to schedule the task for today at 3:15pm. 3:15 didn't work, but 3:16pm did. For the moment I've just moved all my times forward one hour.
    Annoying, but I don't have a better solution. April 1st is when the time was supposed to change; perhaps everything will return to normal then.
    jd
    12 iBook G4   Mac OS X (10.3.7)  

  • DST changes impact on third party java applications

    Currently we are running the following versions...
    O\S Windows Server 2003
    JRE 1.4.2_11
    JDK 1.4.2_11
    Should the JRE \ JDK be patched with tzupdater utility in case of running the third party java application?

    You don't have to apply tzupdater tool.
    Already JDK1.4.2.11 have the updated DST Time Zone Entries.
    Ref: http://java.sun.com/developer/technicalArticles/Intl/tzupdatertool.html
    Regards,
    Vel

Maybe you are looking for