Regarding dump in print program for form 16 tranction code PC00_M40_F16

Hi gurus,
           While executing the tcode PC00_M40_F16 I am getting short dump. details are given
           below. here K1 is Payroll area. its data type is char2 and program is standard program
           so why its generating dump, please gide, thanks
Runtime Errors         CONVT_NO_NUMBER.
Unable to interpret "K1 " as a number.
22|*&      Form READ_INFOTYPES                                                                |
23
24
     Read the Employee Data from the Infotypes
25
26
FORM READ_INFOTYPES.
27
28
RP-PROVIDE-FROM-LAST P0001 SPACE PBEGDA PENDDA.
29
30
RP-PROVIDE-FROM-LAST P0002 SPACE PBEGDA PENDDA.
31
IF PNP-SW-FOUND EQ 0.
32
MESSAGE S089(HRPADIN01) WITH '0002' PERNR-PERNR PBEGDA PENDDA.
33
There is no infotype & for personnel no & from period & to &
34
PERFORM BUILD_ERROR TABLES HR_ERROR
35
USING SPACE SY-MSGID SY-MSGNO
36
SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
37
REJECT.
38
ENDIF.
39
40
RP-PROVIDE-FROM-LAST P0021 '11' PBEGDA PENDDA.
41
42
RP-PROVIDE-FROM-LAST P0185 '02' PBEGDA PENDDA.
43
44
SELECT SINGLE KWERT FROM T511K INTO KWERT
45
WHERE MOLGA = CALCMOLGA
46
AND KONST = 'ADDSS'
47
AND BEGDA <= PBEGDA
48
AND ENDDA >= PBEGDA.
49
>>>>>
RP-PROVIDE-FROM-LAST P0006 KWERT PBEGDA PENDDA.
51
52
'AND PNPESSCF = SPACE' has been added below for ESS changes
53
IF PNP-SW-FOUND EQ 0 AND PNPESSCF = SPACE.
54
MESSAGE S089(HRPADIN01) WITH '0185' PERNR-PERNR PBEGDA PENDDA.
55
There is no infotype & for personnel no & from period & to &
56
PERFORM BUILD_ERROR TABLES HR_ERROR
57
USING SPACE SY-MSGID SY-MSGNO
58
SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
59
ENDIF.
60
61
ENDFORM.                              " READ_INFOTYPES
62
63
64
*&      Form FILL_MAIN_TAB
65
66
FORM FILL_MAIN_TAB.
67
Loop at RT and fill MAIN_TAB with required wage types
68
CLEAR MAIN_TAB.
69
CLEAR EMPLOYER_TAX.

Hi Mani,
Check if u have implemented BAdI for the address 'HR_IN_ER_ADDRESS'.
if yes then check the SAP service market place, as SAP has released one new for the same. But its applicable only if BAdI is implemented.
Let me know if u r still any issue.
Regards,
Praveen

Similar Messages

Standard print program for Adobe Forms

Hi all -
Does anyone know if there was a standard print program delivered for the predelivered Adobe form F110_AVIS_INT? And if there is - what is it? Is there any document anywhere to determine predelivered print programs for Adobe forms?
Your help is much appreciated!
Thanks
Abby

Hi
In SAP you can check for the Print Programs in Tcode <b>OB96</b>
which gives assignment of programs to script layouts
see the links related to Adobe forms
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
Reward points for useful Answers
Regards
Anji

Where do I find the form & print program for Trip Results printout at PR05?

where can I find the form and print program for Trip Results printout at PR05?
Thanks,
Ven

First design your custom form and configure that form(assign to appropriate node in SPRO) in SPRO under following path: Travel Management->Travel Expense->Dialog and travel Expense Control->Forms->PDF-Based Forms->Set up feature TRVFE for settlement form (Execute).
Give the custom form name in that node.
Regards
Deepak.

How to find standard print programs for ADOBE forms

Hi All,
My question is how to find the standard SAP print program for a SAP provided ADOBE form. For example - how to find what is the satndard SAP provided print program for the ADOBE form for payment advice 'F110_AVIS_INT'.
As by default in the transaction F110 (where the payment advice form configuration is done), a SAP Script form is attached and the print program assigned is an SAP Script (as it contains call to function module like open_form, write_form... ) program and not an ADOBE print program.

Hi Renu,
I have gone through the link provided by you but it only shows a list of standard PDF forms.
My question was how to find the standard SAP provided print program (or driver program which contains the data fetch logic and passing of the data to the interface of the ADOBE form) for these SAP provided ADOBE form.
If SAP has provided standard ADOBE form then definitely they would also have provided the standard print program too ?
@Srihari,
The path system --> Status --> program SAPLFPUIFB is the standard program for the SFP transaction and not for the payment advice form F110_AVIS_INT.
It will be same for all the ADOBE forms if we check in System --> Status --> Program.

Print programs for (print) interactive forms

Hello,
I am looking for an (any) interactive form and the print-program belonging to this form.
It can be any form from any moudule, as i only need it for testing purposes.
Thank you!

Hi,
My requirement to migrate puchase order smartformto Adobe interactive form.
I have mgrated my purchase order smartform to Adobe interactive form,
activated form and interface.
Question: How do i trigger or my adobe interactive form purchase order in R/3.
I want to trigger the form from me22n -> print privew..
I have configured in NACE (Output type customization) with same samrtform print program with adobe form and Type as PDF. But the adobe form is not trigering at all.. Can any know how do i trigger adobe form from ME22n.
Is there any special print program for this please let me know..
thx

Standard print program for fi invoice smartform printing

Hi friend,
Is there any standard print program available for printing FI related invoice .
I want print program for printing smartforms.
I want to know any method for searching the standard print program for printing smartform in Fi module.
Thanks & Regards,
Sathish

Hi,
FI related Forms will be configure in SPRO.
Goto SPRO and FI related applivcation.
There you will find the related forms and programs.

Ho to find script and the related print program for print preview of PO

Hi All,
We are getting some text output on the print preview of a purchase order.
How can we determine the driver script and the corresponding print program for this.
Can you please guide on this.
Thanks in advance.
Regards,
Sanjeet

U Can check Driver program and form related to that program table is TNAPPR
Goto NACE t.code
Selct Application ---> click on output types
then u wil get one window there select proper output type and
double click on processing routines u wil get form name and related driver program name also
Plz try this....
Edited by: Upender Verma on Feb 9, 2009 1:33 PM
Edited by: Upender Verma on Feb 9, 2009 1:37 PM

Print program for PO

Hi..
I'm trying to find the print program for MEDRUCK(Purchase Order). In NACE I found a program called 'SAPFM06P' for print output medium.. But it is a subroutine pool.. How to execute this program?
Regards,
Nithy

Yes, the printing program is called by the form
ENTRY_NEU in 'SAPFM06P'

Print program for the smartform for selecting the output type (email/fax)

Hi All,
Requirement :I have to create a print program for the smartform where the output type may be print out,email or fax ,so i need to put the condition for selecting the output type (like printout,email,fax).
can any body please let me know how to put the condition for selecting the desired output type ?
Thanks in advance
Rahul

Hi
It is not the output type that has to be changed
it is the MEDIUM which you have to change and configure
for printout medium is 1
for FAX medium is 2
for MAIL it is 7.
so instead of printout change the medium to 2 or 7 for the same output type and attach to the same driver program and smartform/form.
Reward points for useful Answers
Regards
Anji

SAPscript print program for multiple pages

Hello friends,
How to write SAPscript print program for multiple pages? please help me.
Thanks and regards,
Shivanand.

I believe you have posted this question in the wrong forum. There is an ABAP Forms Printing Forum.

F-58 Print Program for Check Printing

Hi Guys,
Have some questions here:
1) How to locate the print program for F-58 on the Check? We can configure the form by payment method but can't seem to find the print program like other FI correspondences.
2) Can i ignore the check printing and just print payment advice (if any) after posting via F-58?
Anyone has done this before?
Please advice.
Thanks and Regards,
Andrew

Hi
I think I could understand your requirement. There is no special PRINT PROGRAM FOR Payment Advice.
There is Print program for check printing : RFFOUS_C
along with above print program Payment Advice and Payment summary will be printed.
check tcode: OBVCU, here we assign the print program.
and Form will be assigned in tcode: OBVU
or in last case do payment with out any print and create payment advice manually in tcode: FBE1
any questions revert back please
Regards
Hari P
Edited by: Hari Peddi on Nov 25, 2008 9:51 AM

Using standard PO Printing Program for Smartforms

Hi Experts,
I am some hiccups coding my print program for a PO Smartform that am currently working on.The requirement was to use the standard print program to trigger my Smartform PO. I have read alot of threads on this, but am still clueless.
Some says to comment out the functions like "OPEN_FORM" ,"WRITE_FORM" and having your block of codes inside the "NEU_" routine.
But I noticed, there are even some conditions and logic checking before the "write_form" is called and sometimes the table entries are also cleared. In this kind of situation, how should I be passing the table data to the Smartform function module?By copying the contents to an internal table? And there are many include programs which currently the standard program has, should I be using all that too?
Appreciate your input and advice on this.
Thanks very much.

Hi Neesha,
Can you check this once
[Migrating Forms|http://help.sap.com/saphelp_nw04/helpdata/en/9d/9599386185c064e10000009b38f8cf/content.htm]
Regards,
Madhu.
Edited by: madhurao123 on Dec 21, 2011 9:18 AM

How to write print program for smartforms

Hi all
I need to develop new smartform and its print program.
But Im not experience in writing print program for smartform.
Ive gone through the simple print program sample that use only one table as input and one table for output.
But my smartforms require few tables for input and output.
How should I define the Data?
Can anyone guide me on how to write it.
Thanks & Regards
az

Transaction code SMARTFORMS
Create new smartforms call ZSMART
2. Define looping process for internal table
Pages and windows
First Page -> Header Window (Cursor at First Page then click Edit -> Node -> Create)
Here, you can specify your title and page numbering
&SFSY-PAGE& (Page 1) of &SFSY-FORMPAGES(Z4.0)& (Total Page)
Main windows -> TABLE -> DATA
In the Loop section, tick Internal table and fill in
ITAB1 (table in ABAP SMARTFORM calling function) INTO ITAB2
3. Define table in smartforms
Global settings :
Form interface
Variable name Type assignment Reference type
ITAB1 TYPE Table Structure
Global definitions
Variable name Type assignment Reference type
ITAB2 TYPE Table Structure
4. To display the data in the form
Make used of the Table Painter and declare the Line Type in Tabstrips Table
e.g. HD_GEN for printing header details,
IT_GEN for printing data details.
You have to specify the Line Type in your Text elements in the Tabstrips Output options.
Tick the New Line and specify the Line Type for outputting the data.
Declare your output fields in Text elements
Tabstrips - Output Options
For different fonts use this Style : IDWTCERTSTYLE
For Quantity or Amout you can used this variable &GS_ITAB-AMOUNT(12.2)&
5. Calling SMARTFORMS from your ABAP program
REPORT ZSMARTFORM.
Calling SMARTFORMS from your ABAP program.
Collecting all the table data in your program, and pass once to SMARTFORMS
SMARTFORMS
Declare your table type in :-
Global Settings -> Form Interface
Global Definintions -> Global Data
Main Window -> Table -> DATA
Written by : SAP Hints and Tips on Configuration and ABAP/4 Programming
http://sapr3.tripod.com
TABLES: MKPF.
DATA: FM_NAME TYPE RS38L_FNAM.
DATA: BEGIN OF INT_MKPF OCCURS 0.
INCLUDE STRUCTURE MKPF.
DATA: END OF INT_MKPF.
SELECT-OPTIONS S_MBLNR FOR MKPF-MBLNR MEMORY ID 001.
SELECT * FROM MKPF WHERE MBLNR IN S_MBLNR.
MOVE-CORRESPONDING MKPF TO INT_MKPF.
APPEND INT_MKPF.
ENDSELECT.
At the end of your program.
Passing data to SMARTFORMS
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
formname = 'ZSMARTFORM'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = FM_NAME
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3.
if sy-subrc 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function FM_NAME
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
GS_MKPF = INT_MKPF
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
Reward points...

To find print program for smartforms.

pls tell me how to find print programs for smartforms.pls tell me with all steps.clearly.i tried with tanpr table but unable to find

hi,
Please take a look at the NACE transaction where all the output conditions will be configured. Drill down into you specific application and you should be able to find the print program as well as the smart form name.
Steps..
Use NACE and follow procedure as follows
1)Choose Application from list(eg PO)
2)Click OP type
3)Chose one OP type from Right pane.
4)Click on processing routines
and you got it
regards,
keerthi

FBZ5 Print Program and form

Hello All,
I would like to modify the print program and form layout for Transaction FBZ5. Can anyone please tell me what is t
Thanks.

Hi,
Nothing to do with FBZ5 transaction. Since this transaction allows you to regenerate the check (output/Spool request), which is already generated earlier through transaction F-58 and not printed correctly.
Here you can choose either to generate a new check number or regenerate a old check spool output by selecting menu item cheque->Print...
If you want to change the standard output form F110_PRENUM_CHCK, you need to developa new form with help of your ABAP guy.
Hope this clarifies your doubt.
Get back to me for further assistance in this regard.
Thanks,
Srinu

Regarding dump in print program for form 16 tranction code PC00_M40_F16

Similar Messages

Maybe you are looking for