Regarding EDI Tool

Hi All,
Is there Any Drawbacks With the EDI Tools ????
Regards
Vamsi

hi
Go through this may be use ful.
The Risks and Disadvantages involving in the use Of EDI
Trading Partners Involvement - Highly dependence on the participation of trading partners. It is extremely difficult to get a high level of supplier compliance. EDI will be a meaningless if your trading partner didn't get involve using EDI system effectively.
Costly for smaller companies - Many small companies are facing resources problems in getting starter with the initial implementation of EDI system. It is beyond the resources these companies to invest tens or hundreds of thousands of dollars in setting and implementation costs, as well as weeks of personnel training, to get an EDI system running.
Difficult to agreed on standard used - Even though there are widely-accepted and widely-used standards, there are no ways to force trading partners to accept these standards. Cooperation between trading partners is needed in order to develop a common rules to avoid differ in interpretation.
Although there are risks associated with the use of EDI, the benefits greatly outweigh these risks. EDI will lead to improvement in a companys overall performance.
Thanks

Similar Messages

Regarding EDI--XI----File

Hi All,
Here My Sending Application (SAP r/3 ) is Using EDI Tool to send the Data to the Customer.
So here How to Built the Scenario in XI
Which Interface we need to Develop here.
Regards
Babu

Hi,
You need To Develope Your scenario as EDI File to IDOC or Vice versa.
EDI File: This will be EDI standard format basically some flat file .
This will be converted into XI understandable format using BIC tool.
Then Mapping will be done.
IDOC will be posted.
For greater help on Seeburger..
Have a look at these,
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
/people/william.li/blog/2006/03/17/how-to-get-started-using-conversion-agent-from-itemfield
/people/paul.medaille/blog/2005/11/17/more-on-the-sap-conversion-agent-by-itemfield
http://www.stylusstudio.com/edi/XML_to_X12.html
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b0b355ae-0501-0010-3b83-8f2bb566fa47
Details on XI EDI adapter from seeburger
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
EDI with XI
http://www.seeburger.com
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/SEEBURGER_SAP_Adapter_engl.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
http://www.sap.com/asia/company/events/nwtechdays/presentation/australia-slides/Pre-Built_Integration.pdf
http://www.seeburger.com
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.sap.com/france/company/events/2006/02-01-Automotive-Seeburger.pdf
http://h41123.www4.hp.com/presentations/ISUG/XISeeBurger.ppt
Regards,
Akshay Jamgaonkar.
Reward points if find useful.

Regarding TP tool in transports

Hello ppl,
I ve a question regarding transport tool TP. How mant tp tools will be present in the system?
Scenario is: in a project one basis admin receiving a transport request is importing the request and so in the back end tp wil be triggered and runnin.
in the same time if another person receiving a different transport request also tries to import it. if so at that time the same tp tool wil be triggered once again or a new tp tool wil be triggered to process this new transport request?
Can you please give a a clear explanation?
Bala

the transport tools in SAP are TP and R/3 trans.
r/3Trans is the tool, that does the real work for TP. TP controls the import and export of changes and r3trans does them using scripts, that were generated from TP. ans as explained by sunny TP is a process and runs on the concept of Multiple thread.

Regarding EDI 864

Hi All,
I'm doing EDI 846 Inbound.
In some document I found Message Type is INVRPT. my requirement is like I need to create IDOCS using EAI tool once it;s done idocs will come to SAP R/3 system and there i need to add delivery no to that idoc, I found FM as /SAPHT/IDOC_INPUT_INVRPT.. will it post this document to VF01???.. how to know that???
is there any user exits available to do this process?, please let me know if any one done this before
Please send useful blogs regarding this...
Thanks
Message was edited by: Pavan Kothapalli

Krishna,
Have you figured out how to implement EDI.
We have started the EDI project and would like you help if you found any implementation steps/guidelines/FAQs/etc to speed up the implementation.
I am going through the userguides.
Any help is appreciated.
Thx,
Kumar
([email protected])
Message was edited by:
user560416

Regarding Contivo tool?

Please anyone can help me out what is contivo tools ? I need some documents,explantion as well.
Regards,
Raja

Have u referred this link
http://www.contivo.com/builder/builder.html

Regarding EMIGALL tool

Hi,
I have to load premise data into SAP IS-U using EMIGALL tool what is the procedure to load the data.
please reply.
Regards,

We can get the documentation of EMIGALL in SAP,
Go to Transaction EQ81
Some points about EMIGALL :
1. It Migrates data Business Object wise
2. It uses Direct Input Technique
3. It has more than 100 objects of IS-U
Steps
1)Create a user specially for migration which will have all the authorizations related to migration workbench, BASIS and IS-U
2)Create your own company in EMIGALL. There is a default company called SAP.
3)Company SAP contains all the Business Objects
4)Figure out what business objects u need and then u have to copy those business objects to ur company from Standard Company SAP
5)Each objects contains more than one structure and each structure can contain more than one fields. The relation goes like this
Object ---> Structure ---> Field
6)Define field rules for each required field of the object. You have to mark "Not required" for fields u don't need
7)After field rules for a given object is set u have to generate load report i.e. actual Direct Input Program which will migrate data. This program is generated on basis of field rules set by u.
8)After the load report is generated u have to prepare an input file (import File) for migration. The import file should be according to structure provided by SAP and must be in binary format. SAP Provides the structure of file according to your configurations. You have to write ur own Data conversion program(in any language) for this task.
9)Import file as input and migrate the data using generated load program
10)Finally check the Migration Statistics and Error Log
Kanagaraja L

Regarding ticketing tool

Hi
can any one tell me about 1 ticketing tool in detail, or pls send me the links.
i have 5 process chains running,they r taking long time how to improve the performance.
regards
subbu

Hi,
What all steps are included in your process chain? Is it taking long time to get completed?
Regarding process chain performance:
Normally its better to create process chain seperately for Staging layer(Upto DSO level) and the other for Reporting layer(To load Cube leve data).
Delete indexes before DTP execution for Cube and create index will improve loading into the Cube.
Any ABAP programs involved in your process chain with complex code. That might be also the reason for which process chain completion may take long time.
Hope it helps!!!
Thanks,
Lavanya

Regarding EDI: Syntax error in IDoc (segment cannot be identified)

Hi,
My requirement is that I was adding two diffrent field values under two diffrent segments as "E1EDKA1" and "E1EDK02" in outbound invoice IDOCS, INVOIC02 (process code: SD09 - IDOC_OUTPUT_INVOIC).
I am getting the IDOC number through Tcode "VF02". Can any body give me idea how to check that syntax error in debug mode.
Please find the following error details using TCODE "WE02".
*EDI: Syntax error in IDoc (segment cannot be identified)*
*Message no. E0 078*
*Diagnosis*
*The segment E1EDKA1 does not occur at the current level of the basic type INVOIC02 (extension ).*
*This error can have several reasons:*
*The segment E1EDKA1 is assigned to a group whose header segment does not occur.*
*The segment E1EDKA1 does not exist in the syntax description of the basic type INVOIC02 (extension ).*
*The sequence of segments in the group in which the segment appears is incorrect.*
*Previous errors ('mandatory' segment or group missing) may be due to this error.*
Please help me to resolve this problem. <REMOVED BY MODERATOR>
Regards,
Skumar.
Edited by: Alvaro Tejada Galindo on Apr 28, 2008 1:09 PM

It seems that you added segment E1EDKA1 at a place where it is not supposed to be. That's where this error is coming from. The structure of every IDOC is definded by SAP standard and you cannot change the sequence or the level of standard segments. If you require a certain field at a certain level you have to add that field to a Z-segment and then add that Z-segment where appropriate in your extension.
Hope that helps,
Michael

Regarding BR Tools Upgrade procedures

Hi Techies,
While Upgrading the BR Tools iam having the following doubts:
1.Kernel Upgrade from 640 to 700 includes BR Tools.exe also upgraded ,this is ok or
2.Any Other wat to upgrade BRTools separately.(from the current version to marketplace existing version)640 to 700
can any one suggest me the better soltuion in upgrading the BRTools with the procedures and prerequisites
solutions awarded for sure!
regards,
eksrKumar

Hi ESR Kumar
The BR*Tools 7.00 can be used for all SAP releases that run with an Oracle 10g database, or an Oracle 9.2 database after installing the Oracle Instant Client 10g on the Oracle 9.2 database server.
For more information, see Note 849483.
Best Wishes.
Kumar

Regarding EDI----XI----IDOC

Hi All,
I have One Requirement here is that
My Client's Customer will send EDI Formated Data (ANSI Type ) to Client. That Data has to be Posted into SAP R/3 Database. So here We are Using XI For that .
Can Any One Explain me what could be the Scenario here And
How to Handle this ANSI Data Format.
Regards
Babu

Hi
Scenario is EDI-XI-IDOC
Data Will come in the Form of ANSI
1) I Will Use IDOC Adapter in the Receiver End
2) For Sender Side Which Adapter I Need to Use & How to do the Conversion From ANSI Format to XML ??????
Can You Provide Any Real time Scenario Or Any thing Which meets this Requirement.
I am Still in Confusion How this ANSI Data Will be Converted into XML Either it Can Happen in Seburger Adapter OR in XI Also
Can You Expalin me How this Conversion in Detailed
>>>>>>>>>>>>>>>>
if you are getting the data in the format like ANSI then you have to first create the XML message with the help of the BIC mapper.
the BIC mapper is basically used to convert the EDI message into the XML message. to convert the EDI message into XML message ypu have to create the mapping using the option createE2xmapping in the BIC mapper.
the mapping that will be generated using the BIC mapper have to be deployed on the server.
and in the adapter you have to used the same mapping name that you have deploy on the XI server in the module tab of the adapter.
if you still face the problem please reply me back.
Thanks
Rinku

Regarding BR * Tools/SAPDBA

Hi all,
I want to know what is the main difference between BR* tools and SAPDBA, are these 2 different or same? Is this dependent on WAS version? Can anyone explain me difference?
And i know path to down load BR tools:
Main path as starting point
--> SAP NetWeaver
    --> SAP NETWEAVER
      --> SAP NETWEAVER 2004S
        --> Entry by Component
          --> Application Server ABAP
            --> SAP KERNEL 7.00 32-BIT
              --> Linux/IA32 | Windows/IA32
                -->Oracle
                  --> DBATL700O10_nn
What about SAPDBA?

Kittu,
           Brtools, SAPDBA both are SAP's backup utility tools.From Web AS 640 onwards only Brtools are used/avilable. SAPDBA in ended with Was 620. i.e 4.7EE Extset 110 is the last product where you find SAPDBA.
           I hope you are clear now..., so down load as per your version as part of kernel patch.
Regards,
Hari.
PS: Points are welcome.

Regarding EDI Map

Hi All,
I created EDI Map . Positioning fieldds are not able to understand.
Please can u guide when a Zfield is there how did u MAP in the document.
Thks & regards
Venkat

Hi suresh suresh ,
Suppose you are having three views to be displayed based on the road map selection.
create three view container Ui Element in the main view
create a node in the component controller with attributes visibility_view1, visibility_view2, visibility_view3.
map the node to the main view.
bind the visibility property of each view container UI element to the corresponding attributes in the newly created node.
Then go to window , embedd each view to corresponding view containers.
now on the action of each step of the road map make the attribute visibility_view to false or true depending on you logic required.
Regards
Sarath

Regarding GUIXT Tools

Hi All,
GUIXT Tool is for modifyind standard screens. but how can we modify using this tool. fo example if we want to do some modifications in vk13. we have to go t vk13 and activate GUIXT Tool.
from where we can activate this tool.
explain me in details.'
Thanks in Advance,
Regards,
Ramana Prasad.T

Hi,
Please check these links perhaps they may help.
http://help.sap.com/saphelp_erp2004/helpdata/en/89/91b9d8194f11d5b3a30050dae02d7c/content.htm
http://www.synactive.com
http://www.synactive.com/docu_e/specials/guiscripting.html
http://service.sap.com/guixt
Regards,
Ferry Lianto

EDI tool between 2 B'one companies or B'one and R3 companies

Hello expert
We have several affiliates which need an easy tool to upload data from different companies.
Delivery into a PO goods recipt and/or Purchase order into a Sales Order.
All companies run a SAP system either R3 or B'one....
I have heard that there is a SAP add-on to simplify the transaction sanyone knows about it?
Thank you
Guillaume Delanoe

The Product is called B1iSN.......the details on the same can be found on this decidated forum
It comes with the 2007 version of SBO and it is FREE
SAP Business One Integration Technology

Regarding Performance tool

Hi Everyone,
I want to check the performance of my weblogic , which tool is good for performnce checking. I need open free software tool , can u guide to me ,which is good tool and there documentation .
Thanks
Rocky

HI iam trying to use jconsole for my weblogic to chwck the performance , iam getting the error as
Exception in thread "AWT-EventQueue-0" java.awt.HeadlessException:
No X11 DISPLAY variable was set, but this program performed an operation which requires it.
at java.awt.**GraphicsEnvironment*.*checkHeadless(GraphicsEnvironment.java:159)
at java.awt.Window.<init>(Window.java:431)
at java.awt.Frame.<init>(Frame.java:403)
at javax.swing.JFrame.<init>(JFrame.java:207)
at sun.tools.jconsole.JConsole.<init>(JConsole.java:97)
at sun.tools.jconsole.JConsole$6.run(JConsole.java:770)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:597)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)

Regarding EDI Tool

Similar Messages

Maybe you are looking for