Regarding EHP4 Ready ABAP system
Regaring EHP4 ready for EHP4 kit
file name : InstGuide_ERP60SR3EHP4_MSSQL_abap.pdf
And please read page-8 the first sentence begin from
■ After the installation ...
ABAP system based on SAP NetWeaver 7.0 including enhancement package 1,
your system only has the basic ERP 6.0 EHP4 technical usage ABAP
Technology for ERP EHP4. Therefore, the system is in an intermediate
state that is not supported by SAP. To complete the installation
process you must install additional SAP ERP 6.0 EHP4 functionality
in your SAP ERP 6.0 - EHP4 Ready ABAP system.
-> Why SAP does not Support Ehp4 after installation(ie intermediate state)?
- I believe its possible to skip installing Components and can install only required support package while download in MOPZ. In this case SAP does not support? please confirm
regards
jaichan
Hi Jaichan,
it is an EHP4 "ready" installation -> so all application components are on the initial ECC 6.0 level (technically 600) - and the Basis is on NW EHP1 (7.01). This in an intermediate state.
In a second step you are required ERP application parts should be update with EHP4.
In case you want to use a "pure" ECC 6.0 just use a different set of DVD's (e.g. SR3) - then you don't need to install the EHP afterwards.
Best regards,
Christian.
Similar Messages
-
Difference between EHP4 Ready and Installed EHP4 system
When i installed EHP4 Ready System the SPRO path is somewhat different from the EHP4 IDES system for some of activities.
Also when i installed the EHP4 using solman the SPRO is same what was there in the EHP4 Ready system.
Let me elaborate , what we are experiencing
1. For Ex : Easy DMS node is not there in the EHP4 Ready and also not after the installation of EHP4 , Does selection of technical usage effects the functionality ? like in easy dms as we did not select the technical usage of easy DMS in solman while upgrading the process.
2. Also if we have missed this easy DMS stuff , how can we install now ?
Please advice ...Hi,
In EHP4 Ready system, all the basic netweaver components are on 701 release like SAP_Basis, SAP_ABA etc. and all ERP components are on 600 release. So, you cannot use this system as such.
You need to upgrade EHP4 Ready system to EHP4 level using EHPi installer. For that you need to select required usage type in MOPZ in solution managerwhich you want to use in the system and then upgrade it.
As in your case you need to upgrade only easy DMS component in your as system as I assume your system is already upgraded to EHP4 level.
Thanks
Sunny -
I have a new sandbox ERP 6 EHP4 java system. I installed portal and portal core software units and ehp4 portal content, but did not install bi-java as we have a seperate system with bi-java installed Now I am trying to connect the ERP java system to the BI-Java system and the ERP6 ehp4 Abap system. For instance the quality inspector business package requires that an ITS connection be defined to the abap erp 6 system and also a connection be created to the bi system. I am supposed to define the sap_bw system in the portal of the erp6 java/portal system.
I have the ITS connection defined to the erp6 abap system with no issues but am trying to figure out how to configure the connecton to my seperate bi system. What system template is used to create thet connection SAP_BW? For business packages, am i creatng a connection to the bi-apap or bi-java system?
Or did I miss something and should I have installed bi-java on my erp6 ehp4 java system?
Thanks for your help.Dear
Check the templates available in both BI and Portal and run what you find neccesary.
In your BI backend, the RSPOR_T_PORTAL table should contain entry pointing to your portal SAP system.
There is also a report available in BI (rspor_setup). It might not be valid anymore for the latest SAP versions but I believe the report is still available so you can run it to check the settings.
You can find information on SAP_BW on
[http://help.sap.com/saphelp_nwce71/helpdata/en/45/c21540edc547f5e10000000a114a6b/content.htm]
KInd regards
Tom -
Install SAP Baseline Colombia v 1.603 over SAP ECC 6.00 EHP4 Ready SR1
Hi everyone,
I had already installed SAP Development Sysem with the media "SAP ERP 6.00 EHP4 Ready SR1" (SAP Note 774615 - Support Package levels of ERP/ECC installations/upgrades).
Currently we are analyzing with funcitional consultants to install SAP Baseline Colombia v 1.603 over "SAP ERP 6.00 EHP4 Ready SR1" installation, is this scenario correct? Or which installation media should I use?
In SAP Note 1083533 - Installation of Enhancement Package 3 on SAP ERP 6.0, it states that "For Enhancement Package 3, you require the Support Packages of ERP 6.0 Stack 08" so the installation media that is more close to stack08 is "SAP ECC 600 Support Release 2", please confirme me if is this correct?
Best Regards,
Franklin Cedillo
Basis Consultant> I had already installed SAP Development Sysem with the media "SAP ERP 6.00 EHP4 Ready SR1" (SAP Note 774615 - Support Package levels of ERP/ECC installations/upgrades).
> Currently we are analyzing with funcitional consultants to install SAP Baseline Colombia v 1.603 over "SAP ERP 6.00 EHP4 Ready SR1" installation, is this scenario correct? Or which installation media should I use?
You need to use Solution Manager, create a task in the maintenance optimizer and get the correct packages.
Since your system is already on EHP4 (or EHP4-ready) you can forget about the notes of EHP3 and EHP2.
Markus -
EHP4 installation on EHP4 Ready ECC 6.0
HI,
I have completed the installation of ECC 6.0 EHP4 Ready SR1 version. Currently my Netweaver Stack is on 701 and all other ECC <br/>components on 600. <br/>
We want to upgrade the SAP the EHP4 version. But the server is not accepting the generated stack file. We have correctly <br/>chosen the required technical usage and the target stack is also proper in the stack file.<br/>
We are getting the below error.<br/>
<br/>
SAPehpi broke during phase SELSTACKXML in module PREP_EXTENSION / Extension module for start release >= 40B<br/>
Error Message: Error reading stack info, return Code = -1, Reason = 'The stack configuration is not valid for the system XX1, inst.-<br/>no. INITIAL'<br/>
1 ETQ201 Entering upgrade-phase "SELSTACKXML" ("20100804210154")<br/>
2 ETQ367 Connect variables are set for standard instance access<br/>
4 ETQ399 System-nr = '00', GwService = 'sapgw00'<br/>
4 ETQ399 Environment variables:<br/>
4 ETQ399 dbs_ada_schema=SAPR3<br/>
4 ETQ399 auth_shadow_upgrade=0<br/>
4 ETQ399 Set environment for standard connect:<br/>
4 ETQ399 ENV: dbs_ada_schema=SAPR3<br/>
4 ETQ399 ENV: auth_shadow_upgrade=0<br/>
4 ETQ399 Set RFC variables for standard connect:<br/>
4 ETQ399 System-nr = '00', GwService = 'sapgw00'<br/>
4 ETQ399 Set tool parameters for standard connect:<br/>
4 ETQ399 default TPPARAM: DEFAULT.TPP<br/>
1 ETQ200 Executing actual phase 'PREP_EXTENSION/SELSTACKXML'.<br/>
1 ETQ399 Phase arguments:<br/>
2 ETQ399 Arg[0] = 'SPDA_SELSTACKXML.LOG'<br/>
2 ETQ399 Arg[1] = 'FORCE'<br/>
4 ETQ399 EhP stack selection ...<br/>
4 ETQ399 Reading stack content ...<br/>
4 ETQ399 ... reading stack configuration file "/datadump/EHP4/SMSDXML_XX1_20100529205616.460.xml"<br/>
4 ETQ230 Starting RFC Login to: System = "XX1", GwHost = "xxxxxxx1", GwService = "sapgw00"<br/>
4 ETQ359 RFC Login to: System="XX1", Nr="00", GwHost="xxxxxxx1", GwService="sapgw00"<br/>
4 ETQ232 RFC Login succeeded<br/>
4 ETQ233 Calling function module "SPDA_GET_STACK_INFO" by RFC<br/>
2 ETQ399 Returned table ET_STACK_NCVERS:<br/>
2 ETQ399 Returned table ET_STACK_PACKAGES:<br/>
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL")<br/>
WE have tried regenerating the stack files couple of times, but no hope. Should the SAP have a permanent license to proceed with <br/>the EHP4 installation.<br/>
Is there any thing I am missing?<br/>
Kindly help .<br/>
regards,<br/>
Sreekanth<br/>
Edited by: sreekanth ch on Aug 9, 2010 11:06 AMHi,
4 ETQ399 ... Error reading stack info (rc=-1, reason="The stack configuration is not valid for the system XX1, inst.-no. INITIAL")
Just to make sure, have you generated and applied "Permanent License" ?
If not, Then generate both Product License and Maintenance license key on Service Market Place and install it on newly installed server.
Then try again...
Regards.
Rajesh Narkhede -
ECC6 EHP4 Ready NetWeaver 701, XML file
HI Guys, I just finished installing ERP6.0 Netweaver EHP1 on HPUX and Oracle 10 g database. I want to upgrade the EHP4 components and my problem is Solution Manager is 4.0.
I am sure you have seen this tread many times, please ignore my ignorance, I am just lost reading so many treads in this regards.
How do I generate the XML file needed for EHP4 on solman 4.0?
Regards and many thanks.
KHi,
> 1. One thing that I did, I did not include IS-oil and IS_UT stacks. Would this cause any issue?
What ever package you want to upgrade in your system should be included in the xml file.
> 2. EHP installer is not able to connect to solman to fetch the xml file. I have to move the file to another directory. Should it be >EPS/in or any other directory like /tmp will work?
This file should present in download directory which you have defined.
> 3. Since I have installed EHP4 ready system, can I use sapinst to install the EHP4? I do not find ehp installer friendly at all?
>
There is no way in sapinst that you can upgrade your existing system. You have to use ehpi tool only to upgrade add-on's. This tool is very good if you have read the upgrade book carefully.
Thanks
Sunny -
Installing ECC6 EHP4 ready - Oracle Client extraction
Hi,
I am installing an ECC6 EHP4 ready system.
Our server has multuple systems running on the server with Oracle Database and oracle client is already available.
During instalation, sapinst always tries to extract Oracle client and we dont want this, so we always rename the OCL10264.SAR file to OCL10264.SAR.OLD or something like that and the sapinst step fails.
Then we just modify the keydb.xml file and make the step - OK.
I dont see this option now with ECC6+EHP4 installation.
The Keydb.xml looks different too.
Does anyone know how I can ignore this step and continue with this new release?
Even though I see a lot of improvements in SAPINST with the new release, it would be bad if this step or any other step cannot be ignored anymore.
Please suggest
SuhailProblem solved....during the initial stages of the installation while it gathers all information, it checks and makes sure that the client software is available but doesnt extract it....i made it available and the installation went ahead....it extract it later before the database installation and at that time I removed it and when the installation failed, I was able to modify the keydb.xml file.
Regards
Cyrus -
Error while installing J2EE Add- In to the ABAP system
Error while installing J2EE Add-In to the ABAP system
We are installing J2EE Add-In to the ECC5 System in the new hardware.
When are getting Error while installing J2EE Add-In to the ABAP system.
Transaction Begin*****************************
ERROR 2005-08-10 14:58:28
CJSlibModule::writeLogEntry()
CJS-20011 J2EE engine configuration error. DIAGNOSIS: Error when
configuring J2EE Engine. See output of
logfile /usr/sap/QSS/install/batchconfig.log: 'My Library Path
is: /usr/j2se/jre/lib/sparcv9/server:/usr/j2se/jre/lib/sparcv9:/usr/j2se/jre/../lib/sparcv9:/tmp/sapinst_exe.13084.1123702275:/usr/lib::/usr/openwin/lib:/usr/sap/QSS/SYS/exe/run:/oracle/QSS/920_64/lib:/oracle/QSS/920_64/lib32:/usr/lib
ElementInfoTask has finished successfully on dispatcher
ConsoleLogsTask has finished successfully on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on dispatcher
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on dispatcher
ElementInfoTask has finished successfully on server
ConsoleLogsTask has finished successfully on server
ChangeManagerPropsTask has finished successfully. Manager:
LockingManager on server
ChangeManagerPropsTask has finished successfully. Manager:
ClusterManager on server
ChangeServicePropsTask has finished successfully. Service: dbpool on
server
ChangePasswordsTask finished successfully.
Error occured while connecting to database (UploadFile). Msg: No such
algorithm: DESede
Transaction end***********************************
We tried twice clean installation, after removing j2ee dir, SCS and
resp profiles and droping PSAPQSSDB tablespace and SAPQSSDB user.
I have also confirmed the passwords in ABAP system/000 for SAPJSF, DDIC, J2EE_ADMIN, J2EE_GUEST.
We are getting the same error in both tries.
Kindly advice us to resolve the problem.
Thanks and Regards,
SrinivasAnanda,
you saved my day! I've been banging my head against the wall with this same problem during a J2EE add-in installation for SRM 4.0 on Windows, in preparation of an LAC 2.0 installation. I had tried deleting the schema first, but that didn't work. After I removed the sys\global\security folder as well, it worked perfectly.
Thank you. -
Error while installing the java add-on on abap system
Dear All,
We are trying to install java add-on with EP on present ABAP system, but getting struck up with error as below at creating java users (sapjsf) in central instance installation phase.
ENVIRONMENT:
ECC6.0
WIN 2003
KERNEL 136
SUPPORT PACK LEVEL AT 13
NETWEAVER 2004S SR1.
DB- ORACLE
error: ( usercheck.log)
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
error: (sapinst.log)
WARNING 2008-08-11 15:00:00
Execution of the command "C:\usr\sap\B60\DVEBMGS00\exe\jlaunch.exe UserCheck.jlaunch com.sap.security.tools.UserCheck "C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\lib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install\sharedlib;C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\install" -c sysnr=00 -c ashost=sapserver -c client=001 -c user=DDIC -c XXXXXX -a checkCreate -u SAPJSF -p XXXXXX -r SAP_BC_JSF_COMMUNICATION_RO -message_file UserCheck.message" finished with return code -1. Output:
java.lang.NoClassDefFoundError: com/sun/tools/javac/Main
Exception in thread "main" Reserved 1610612736 (0x60000000) bytes before loading DLLs.
Critical Error
Launching program failed
-> Internal program error (rc = -1)
INFO 2008-08-11 15:00:00
Removing file C:\Program Files\sapinst_instdir\ERP\LM\AS-JAVA\ADDIN\ORA\CENTRAL\CI\dev_UserCheck.
ERROR 2008-08-11 15:00:00
CJS-30197 . For more details see output of logfile:
ERROR 2008-08-11 15:00:00
FCO-00011 The step createJSF with step key |NW_Addin_CI|ind|ind|ind|ind|0|0|NW_CI_Instance|ind|ind|ind|ind|8|0|NW_CI_Instance_Doublestack|ind|ind|ind|ind|2|0|createJSF was executed with status ERROR .
Please help us out at your earliest convenience.
Thanks and warm regards,Dear Samrat Dangeti ,
Thanks.
Inst version: 701.
JDK version: 1.4.2_13
Regards, -
Hello All,
There are 2 ABAP systems into consideration here.
A custom application is running on R/3 4.7 system.
This application also accesses data from another system - ECC 6.0
Issue:
Users get a login prompt to access ECC..which is to be removed...
Question:
How can I set a SSO connection between these two ABAP systems?
Awaiting Reply.
Thanks and Warm Regards,
RituHi Ritu,
First you need to ensure that your systems support SSL.
Use the procedure given here:
http://help.sap.com/saphelp_nw70/helpdata/en/65/6a563cef658a06e10000000a11405a/frameset.htm
Once SSL works, you can then setup SSO as per the link given in the previous post. -
How to allow login using email address (ALIAS) to Abap system
Hi,
we are developing some Abap Webdympro to logon to an Abap system, release Netweaver 731, in order to allow our end user to logon via Internet browser to this system.
So our Abap system is acting like a Portal system, but it's not a J2EE system, it's just a Netweaver Abap system with the following components installed:
SAP_BASIS
SAP_ABA
PI_BASIS
ST-PI
IW_BEP
SAP_BW
UI2_700
UI2_701
UI2_702
UI2_731
UI2_FND
UI2_SRVC
UI5_731
UISAPUI5
UI_INFRA
No SSO is configured on the ABAP system, and no connection to the LDAP directory is in place , and it is neither foresee.
In this moment we are able to login with the user-id of the user we created into the SU01, butt we would like to allow the access using the ALIAS of the users too.
The ALIAS of these users is like '[email protected]'.
We did some test but trying to logon we recive always the message:
"500 SAP Internal Server Error
ERROR: System logon form fields have invalid values (termination: ERROR_MESSAGE_STATE)"
On the network I'm able to find only post related to this issue using a J2EE portal, but nothing using an ABAP system as Portal.
Any idea ?
RegardsHello Arul,
welcome to the SDN CRM Development forum.
1. I think you should clear the data with duplicate E-Mail adresses in the external tool.
2. Unsubscription could be done by a Marketing Attribute which could be set by using a Target Group which is created by Campaign Automation. Have a look at this Toppic. There is also a Best Practice avaliable at http://help.sap.com/bp_crmv340/CRM_DE/index.htm.
3. Also HTML or Simple text can be mained in a Marketing Attribute. You have to use different Mail Forms to which are sent to different Target groups.
Regards
Gregor -
Error while Installing the Java Add-In for an Existing ABAP System
Hi all,
I need help, i am Installing the Java Add-In for an Existing ABAP System
SAPInst stops on the first installation step: "Central Services Instance (SCS) Java Add-In", the step is "Install common system files" on the following sub-steps:
These are the last few lines on the sapinst.log.
INFO 2009-05-21 12:35:12
Execute step createAccounts of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:18
Execute step setUserEnvironment of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_Users_Create_Do|ind|ind|ind|ind|3|0.
INFO 2009-05-21 12:35:19
Execute step InstallJDBCDriver of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_JDBCDriver_DB4|ind|ind|ind|ind|4|0.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc.
INFO 2009-05-21 12:35:19
Creating directory V:\sapmnt\BIQ\jdbc\tbx.
INFO 2009-05-21 12:35:21
Copied file 'V:/QIBM/ProdData/HTTP/Public/jt400/lib/jt400.jar' to 'V:/sapmnt/BIQ/jdbc/tbx/jt400.jar'.
INFO 2009-05-21 12:35:22
Execute step updateNtPatchDlls of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
INFO 2009-05-21 12:35:23
Execute step sCreateSystemOS4 of component |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0.
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
MOS-02001 Call of command "CRTR3SYS SID(BIQ) GLOBALHOST(*LOCAL)" failed. Exception is "CPF0006".
ERROR 2009-05-21 12:35:42
FCO-00011 The step sCreateSystemOS4 with step key |NW_Addin_SCS|ind|ind|ind|ind|0|0|NW_System|ind|ind|ind|ind|5|0|sCreateSystemOS4 was executed with status ERROR .
Thanks in advance for any help.
Kiran ChebroluHi,
Hope this note would solve your issue, please read carefully and validate with your issue
Note 1032019 - Java Add-In: Error when you create the SCS instance
below notes give your suffice information.
Note 883948 - NW 7.00(2004s): Inst.Add.Java Usage Types/Software Units
Note 1268493 - NW 7.01/BS 7: Inst.Add.Java Usage Types/Software Units
Note 1025789 - RUNR3CMD generates CPF0006
regards
nag -
RFC destination Java = ABAP system to wrong system
Hello everyone,
I have a NW04 Java system (WebAs 640, SP19), which has an RFC destination to an ABAP system.
The strange this is this: we changed the target system of the RFC connection to a different one (let's say from SID1 to SID2), they have different system numbers, different host names and different gateways. Only user and password we kept the same, as that's easier to maintain.
We have a self developed java application which uses this RFC connection.
When we call the application using only the <b>not</b>-fully-qualified hostname the RFC connection to the old (SID1) is used, but the destination is defined with SID2.
However, when we use the fully qualified hostname in the URL, it works with SID2 (which is correct).
Does anyone have an idea why that happens and what we can do to prevent that?
Regards,
CorneliaHi Mantosh,
it's an RFC connection entered in Visual Administrator of the Java System (service Destinations), so there's no possibility to set an RFC type like in SM59.
Of course you're right concerning the hostnames, but I was wondering how that could happen. Normally, it should read the data which I configured in the RFC connetion and use that.
We deleted temporary files and cookies and all from the workstation were we started the browser, even rebooted the workstation, but no effect.
Do you know any cache were the java system could have the old data left?
Regards,
Cornelia -
Installing Java Add-In for an existing ABAP System -Error SQL compatibility
Hello gurus,
We have a system and it has only the ABAP instance! So my goal is install the JAVA iinstance. In this momment I´m reading the section "4.4.2 Installing the Java Add-In for an Existing ABAP System (Optional)" in installation guide "SAP ERP 6.0 SR3" (ABAP+JAVA). So, I want to install the JAVA instance which is the Java Add-In for an existing ABAP system!
So what I did was followed that instructions on that section in guide!
As you certainly know this process has three sequential phases:
1) Central Services Instance (SCS) Java Add-In
2) Database Instance Java Add-In
3) Central Instance Java Add-In
The first phase - Central Services Instance (SCS) Java Add-In - it already finished with success, but I´m faccing with a weird error in second phase Database Instance Java Add-In when I entered all required input parameters, SAPinst shows an error that says:
The database PRD has the wrong compatibility level. The database used for the installation of an SAP system must have compatibility level: 80 for MS SQL Server 2000 90 for MS SQL Server 2005 SOLUTION: See the MS SQL Server documentation on how to set the compatibility level for a database.
I don´t know what´s happen, in fact my database is an SQL Server 2008 (100), but I already change it at management studio, the compatibility level to MS SQL Server 2005, but still the error remains!!! I also tried to ran again the sapinst process, I restarted it but it still show me this error!!
Can you tell me why and how can I solve this problem?
Best regards,
João Dimas - PortugalHello Sunny,
I still have this error... I don´t know what do to more for this situation!
I found one not which report this error of compatibility - Note 1152240 - Setting Up Microsoft SQL Server 2008 (R2) - in chapter "VII TROUBLESHOOTING" which said to follow the instructions in chapter III - "Installing SAP systems based on SAP NetWeaver 7.0 SR3".
When I read this last chapter (III) it tell us to do:
If you want to install an SAP system based on SAP NetWeaver 7.0 SR3 on SQL Server 2008, you cannot use the Installation Master and Kernel DVD that you received from SAP or downloaded from SAP Service Marketplace. Instead, you have to do the following:
Patch your runtime libraries by applying the procedure that is described in note 684106 for your release and machine architecture.
Use a modified Installation Master DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Installation Master DVD".
Use a modified Kernel DVD
For more information, see section "VI PROCEDURES" -> "Creating a modified Kernel DVD".
I did everything that is said in the note (except the "Creating a modified Kernel DVD") because I can not access to the note 1480785 (it say: "The requested SAP Note is either in reworking or is released internally only")
Can you help me... can you guide me... please!?
Best regards,
João Dimas - Portugal -
Hi,
To configure access to a backend system for use in VC, Web dynpro etc in CE 7.1, is it right to go to Configuration Management -> Security -> Destinations?
And then create an HTTP destination followed by an RFC destination pointing to the ABAP system?
Or do we have to configure the SLD for the ABAP system in question.
Which one is right and more suitable.
Also, In future will SAP continue to release EE only version or will future releases always have the composition tools as well. e.g I need the full version for GP, VC etc.Hi Prem,
The destination service can be used to connect to any http/rfc systems.
Even the SLD system itself is to be registered through destination service as an http destination.
http://help.sap.com/saphelp_nwce10/helpdata/en/45/e9cfe128063483e10000000a1553f6/frameset.htm
And according to the documentation from Destination service, not all applications use the Destination service.
Some applications have their own connection maintenance tools.
http://help.sap.com/saphelp_nwce10/helpdata/en/07/0d27932264284b883dab13ce1008a6/frameset.htm
So it is upto your application to decide where to maintain the connection.
For example: While creating JCO Connections you need to have your system registered in SLD.
Hope this helps to get some idea.
Best Regards,
Praveen Gudapati
Maybe you are looking for
-
My wife and I share the same apple id, we just updated our iphones. When we were asked if we wanted to share the same apple id for icloud we said yes, now our phones can't face time, please help?
-
MSI R7870 TWIN FROZR 2GDS - cant detect monitor. (no signal/no video input)
I already post this before, but it seem it being blocked as I didnt have the genuine window. (https://forum-en.msi.com/index.php?topic=162310.msg1189334#msg1189334) Fine by me. Now I alrdy have a genuine window and the problem still occur. I already
-
When I go to update my IPhone to the 5.0, it updates until the very end until I get a pop up message saying, "The Network connection timed out". How can I prevent this from happening or what else can I do to update my phone?
-
External navigation towards ibase component
Hi all, I'm facing an issue in the dynamic external navigation towards an ibase component. We need to be able to show the Ibase Component for a specific Ibase Component triggered from SAP GUI. this is for all object types quite easy. You have to gene
-
How do I get my favorites from Internet Explorer into Fox Fire?
When I downloaded Fox Fire it asked me what I wanted to import but I was not able to import Internet Explorer Favorites into the Bookmarks....can this be done?