Regarding ERP Integrator

Dear All,
I have few doubts on ERP Integrator.
1) What are things required from Oracle GL to Planning for Data Loading using ERP Integrator? (Trail Balance is enough or we required some other file from Oracle GL)
2) Is there any scheduling options available for Data loading using ERP Integrator?
3) what is process for loading the data to Planning using ERP Integrator?
4) How we load the data to Planning? (i.e. monthly load, hourly load)
Is there any document is available for ERP Integrator in detail?
Anyone please guide me in this situation.
Thanks,
PC

Hi,
I think it is worth having a read of the documentation first :- http://download.oracle.com/docs/cd/E12825_01/epm.111/erpi_admin.pdf
It should answer many of the questions you are raising.
Cheers
John
http://john-goodwin.blogspot.com/

Similar Messages

ERP integrator target applications greyed out

Hi all,
I'm configuring the ERP integrator within EMPA (to use with FDM later) but when registering target applications three of the four are greyed out.
I have tried to delete and refresh them, re-deploy and so on but they stay greyed out.
Can anyone tell me how to re-activate the target applications so i can select them again?
Thanks,
Marc

Hi All,
Did any of you had success in configuring FDM with ERPI. I am trying to configure FDM+ERPI for extracting data from Oracle Financials R12 and load it into an EPMA Planning application. When i go onto create a Metadata Rule and click on the Add Dimension button, the next page gives an error stating: There are no more dimensions remaining to be mapped under this application. and the dimension drop down in the target application area remains empty. Any idea why this happens? My Hyperion version is 11.1.1.3. I also downloaded and applied latest available patch of ERPI but no results.
Thanks & Regards,
Muhammad Jamshaid Nawaz

Business One & Business Suite ( ERP ) Integration

Hi,
I'm looking for the official alternatives from SAP regarding the integration of SAP Business One and SAP ERP ( 6.0 ECC ).
I know there is a SAP Business One version 2005 Integration for SAP Netweaver, but the question is if this alternative is standarized, works fine and if it requires custom development of any type or if it's just plug and play.
Is there any other documentation or experiences available with this alternative, or other alternatives available.
Thanks.

Thanks Lisa your answer!
I changed the company database in SLD -> B1If -> B1DI section. Tested the connection and everything is OK in the Integration Framework.
Tried in SBO client. At the login no problem, no error message, but the dasboard show this message:
SAP B1iP detect an error:
Emitted HTTP-Code
500 - Internal Server Error
Internal Reason
Did not supply an appropriate user-ID integer (Param6):
Remonnendation
Check the correctness of your activity or environment or ask your system-administrator for further help.
I checked the dll and database version, there are OK, 880230.
Restarted the Integration service and try again, but could not connect the B1 dashboard.
Try the hungarian demo database which have B1i user, and I met same error messege than the test database.
Other important thing in the test database than I see. It has not B1i user, but has B1i1, B1i2....etc.. to B1i40.
Is this normal? I try to create B1i user and the B1 say: This user exist in database table.
Have you got any idea?
Gabor
Edited by: Gábor Nagy on Aug 4, 2010 7:11 PM

SCADA - XMII - ERP integrations through SAP PI

Hi Experts,
I have an integration scenario comprising of a SCADA system & SAP ECC. Could anybody suggest some document / send reference links on SCADA - XMII - ERP integrations through SAP PI.
Useful response would be appreciated.
Regards,
Santhosh

SCADA-XMII integration
Scada system should always remain connected to some Historian system. You can directly connect to SCADA system to xMII using vendor specific UDS (Universal Data Servers) Like Citect UDS ...
If vendor specific UDS is not available in MII then you can make it possible if the SCADA system is OPC complaint, through OPC UDS DA, but it provides only current data without any mata data information.
As a robust business practice it is not recommended to use direct SCADA connectivity to xMII, it should go through some Historian( Citect, Wonderware, Siemens...many more) so XMII will be able to get all plant floor operations data in history & current modes.
XMII-ERP Integration
XMII supports IDOC & BAPI communication with ERP system using various SAP connectors available in XMII as in SAP BC, SAP JCO.
Specific to PI Sheet, you can download various control receipe, process orders data using IDocs.
BAPIs can be used to do "process order confirmations" back to ERP system and make changes in process data.
Let me know if you would like to know about specific SCADA system- xMII connectivity or specific activity in PI.
Thanks
Ram Upadhyay

Hyperion ERP Integrator 11.1.2.1 and ODI

Hi,
We have setup EPM 11.1.2.1 on a distributed Environment
Machine A - Web Tier Components (Foundation,HFM,Reporting and Analysis,FDQM)
Machine B - Services Tier Components(Foundation,HFM,Reporting and Analysis,FDQM)
Now I would need to have the ERP Integrator talk with Peoplesoft and to do it I would need ODI. So When I try to Install ODI 11.1.1.6 in Machine B, the weblogic (that gets installed during EPM 11.1.2.1) in machine B is 10.3.4 and is not compatible with ODI 11.1.1.6(which needs weblogic 10.3.5 or more).
While I have raised an SR for the same. If any of you have come across such a situation,kindly share your experience/suggestions.
Regards,
Leo jose.

Thanks for your valuable inputs and time.
I just spoke with Oracle Support and they had communicated that, EPM 11.1.2.1 is not compatible with ODI 11.1.1.6. ODI 11.1.1.5 is the only compatible version with 11.1.2.1 and they say their customers were sucessfull doing the installation(but then again 11.1.1.5 uses weblogic 10.3.5).I am going to give it a try.
First question would be are you going to use the J2EE components with ODI, if not then you don't even need WebLogic - I am just trying to understand the need of J2EE components for using ERPi+ODI pull data from PeopleSoft.
Is it advisable to install WebLogic 10.3.5 to a separate location? Will it not create an impact on the existing EPM environment.Also please note that, we have deployed all the application in Machine A and Machine B is going to have ODI.I think this should be my solution, if yes.
I know that 11.1.2.2 upgrades Weblogic to 10.3.6 - We are unable to find the 11.1.2.2 setup files in E-Delivery.
Thanks again,
Leo Jose.

Activation of CRM RDS with ERP integration impact on existing ERP configuration

Hi,
I'm doing automatic content activation (via Solution Builder) of the CRM RDS solution with ERP integration. The CRM system is a new installation which will linked to an existing ERP system.
Will the activation of RDS Solution content overwrite the existing configuration in ERP? What is impact of on existing configuration and existing process on ERP?
Regards,
SK

1. The add-on seems to support all new versions of ECC, does this include ECC on HANA ? --> The add-on supports all release of ECC above the base release mentioned in the Integration guide, including ECC on HANA
2. Is it necessary to backup the environment before installing the add-on ? --> The Add-On does not contain any DB tables. It should not interfere with the ECC environment, so you can install these without any disruption or downtime. As part of general hygiene, you may want to make sure that there is a recent enough backup for the ECC system.
3. The component seems to be isolated from impacting any ECC functionality and its just for the purpose of integrating C4C with ECC. Would this mean that no regression testing is required in ECC ?
No regression testing is required for ECC standard functionality. It will not affect existing distribution models. You will have to set up new ones for Cloud for Customer Integration scenarios.
4. The component doesn't seems to have an uninstall option which would meant that any reverts could only be done through system backup only. Is this accurate ? --> There is no uninstall option.

ERP-integration via middleware

Hi,
It is possible to create a wbs-element for a campaign element without creating a wbs-element for the campaign when using ERP integration via middleware (automatic on releasing)? We are in addition using the badi for checking on campaign type and tactic.
Regards Camilla

Hi,
would not think that they actually need access to your production systems but rather a replica that is as close as possible in all aspects. If access to the production system is required, then set up a totally read only groups and assign the individual integrators to those groups.
There are a couple of ways that the issue of responsibility for interfaces/integration can be handled.
One is to have the Implementer agree to provide the services to do the analysis (requirements and functional) and then to develop, test and resolve any issues from the tests. However, this will require that they be come "experts" in your legacy system and add to the total cost of the implementation of the ERP.
Another is to have your internal IT Department take on the management of this part of the project to include analysis (requirements and functional) and then to develop, test and resolve any issues from the tests. There are some benefits to this. First they have the expertise in the legacy system and second, it will allow them to learn the ERP system more intimately and provide the opportunity to become experts there as well. Some drawbacks may include the learning curve for the new system and its technologies (this can be remedy by bringing in short term technical consultants that have experience in the technologies to help during the development of the interfaces/integrations and provide "training").
One other way is to just bring an "integrator". But, again, the integrator may need to become experts in both systems and this adds a little more to TCO.
No matter what you, or your company, decides to do, remember, the more you do up front (analysis and design) the less that needs to be done on the back side (development and testing) and the easier the project will go.
Reward points if found helpfull..
Cheers,
Chandra Sekhar.

Unable to refresh metadata rules in ERP Integrator

Hi All,
While refreshing Metadata for particular location in ERP integrator the status goes failed . After sometimes it been refresh for the same location without any error messages.
Could you please tell why it's happen?
Thanks,

Hi,
someone is asking the same question here: http://forums.sdn.sap.com/thread.jspa?messageID=11123412&
regards,
H

Project Kickoff and ERP Integration workshop updates for r1402

The following workshops and accelerator are update for r1402 in the SAP Cloud for Travel and Expense Service Delivery Kit wiki (only SAP employees and partners have access).
Implementation Project Kickoff
SAP ERP Integration Workshop
Systems Requirements Checklist
We welcome any feedback in the Accelerators and Workshops Feedback wiki.

Hi,
I think most of your questions have already been answered.
Regarding the difference from SAP SRM, the E-Sourcing product is Java based and it takes lesser time to setup.
Configuration is through the UI.
Functionally, the benefits are very similar between ES and SRM - however E-Sourcing additionally supports Contract Document Authoring and Forward Auctions.
From the technical configuration point, Java and SQL skills are needed for customizations.
Also ES is available as an On-demand product.
Hope this helps.
Regards,
Reshma

ESO/ERP Integration for Service Items?

Hello experts,
In an ESO/ERP integrated system, can data from Service master in the ERP also be used to create RFQ's and Auctions in ESO?
Are there any special considerations for Service Items in such an integrated environment or would they be treated as regular material master items inside ESO?
Thanks & Regards,
Reshma

Hi Reshma
You are right, currently Item type D is nto supported for the ERP - ESO implementation for Document types RFQ, PR, PO that are created from the MSA or the RFx award from SAP ES.
However, you can still try to create the interface using some Z programs if you are pushed to the limit
What you can do?
1) Copy the Program for the BBP_ESI package model it to suit methods that call the Service line into the PR with Item category D - if you are successful here, you can check with the available list of API's on the ES side to check where in the XML extract you can actually incorporate the Service lines
2) Create a Proxy using the existing interface delivered for RFQ or PR from ECC to SAP ES RFx, in PI you can define the Service line logic so that the Payloads in PI can enable this transfer
3) The XML that is generated for this interface must be in Sync with what all RFx expects to process it as a service line, since there is no classification on the SAP ES side for addressing service lines separately.
4) You can also extend the XPRess functionality, since SAP ES views Service and print requests service lines, see if you can somehow integrate creation of an XPress draft from a Service PR in ECC, that too should be possible.
5) If all approaches fail, its better to integrate the SRM SoCo to push the Service lines into SAP ES RFx draft, below would be the approach.
u2022 Requirements from SRM, SAP R/3 or SAP ECC to SRM Sourcing cockpit
u2022 Create Bid invitation in SRM : Draft status
u2022 All SRM Bid Invitations to populate in a new screen developed, this screen will have all bid invitations lined up with a check box next to them, the Bid Invitation can be selected and pushed to SAP E-Sourcing
u2022 Proxy created to extract these fields from SRM and put it in XI outbound
u2022MAP / Cross MAP the data structures and pass the data
u2022 Push the Bid Invitation into SAP E-Sourcing as RFx Draft
u2022 Once the Bid Invitation is pushed into the SAP ESO application, it cannot be modified in SRM
Hope this gives you some fair approach

Error When Clicked on ERP Integrator Menu In shared service

When Cliked on Administratio --> shared servcie console. A new window is opened where I can find one tree strucuture.
1)User Directory and 2)Application Group. when i expand Application group node it displays tree structure. From the tree structure If i select FDM -- > Erp integrator menu I get error "Required application context aif is not available. Please contact your administrator".
I have gone through many articles but no solution for the bug.
Thanks In Advance. :)

Hi Anand,
"Action Failed" error for "Exisitng Roles/Groups" comes up when Support Pack level of frontend(JAVA) and backend(ABAP) RTA are not synchronized. It happens mostly with HR RTA.
Please follow the SAP Note below to make sure your SP's are in Sync.
Note 1352498 - Support Pack Numbering - GRC Access Control
Best Regards,
Sirish Gullapalli.

ERP Integrator

Hi all,
We have requirement to load data from oracle GL to Hyperion planning by using ERP integrator and ODI.
We configured the source system in ERP integrator and ODI.
When we try to Intialize the source system in ERP integrator,we are getting error in ODI operator "Table or View does not exists"
Thanks

Hi Murali,
1. I have faced this issue recently ,and the solution is very simple .Go to your browser -> internet settings -> language settings -> add english US here .
2. Restart the ERP services, and check after logging into workspace , if you still have $
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

FDM mapping in ERP Integrator

Hi, all of you
I'm now thinking of the way to connect Oracle EBS 12.1.1 and Oracle Hyperion Financial Management, Fusion Edition 11.1.1.3.0 with ERP Integrator.
In the introduction section in ERPI admin guide, ERPI is mentioned as a module of FDM.
However, as far as I read the later sections in the guide, FDM is needed only if the user wants to use "FDM mapping."
Is my understanding correct, and EBS and HFM is connected only with ERPI (without FDM)?
And, if you know the advantage of using FDM mapping (I couldn't understand, actually), please tell me.
Thanks in advance
Yoshiki

FDM is not required.
The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

ERP Integrator Source Informations

Hi All,
I would like to know whether ERP Integrator will support the External feed file(from any other source system) to Hyperion Applications. ERP Integrator will support all ORACLE ERP & HR Modules, but in terms of external system likes Customized ERPs it will support or not. I understood from the below content, it will support the external system through Open Interface Adapter. I couldn't find any document on Open Interface Adapter.
Anyone having the experience on the above scenario, Please share your experience and let me know is there related document or URL..
I got the below content from the Oracle documents:
ERP Integrator supports general ledger data for:
Oracle E-Business Suite 11i
Oracle E-Business Suite 12
Oracle Fusion Financials
PeopleSoft Enterprise Financial Management 9.0
PeopleSoft Enterprise Financial Management 9.1
PeopleSoft Commitment Control
SAP ERP Financial
JD Edwards General Ledger system
ERP Integrator supports human resource data for:
PeopleSoft Human Capital Management 9.0
Integration includes data load and drill through. The integration is supported for the following SAP ERP Financial modules:
General Ledger
Profit Center
Cost Center
In addition ERP Integrator provides support for Open Interface Adapter. The Open Interface Adapter allows you to import data from any source system using the interface table.
Thanks,
PC

Hi All,
Got the Answer, The ERP Integrator will support external feeds files through FDM as well as they introduce Open Interface Adapter for flat files in new version(11.1.2.2). Please refer FDM ERP I read me document for more details. Currently i dont have any information for Open Interface Adapter. I will let you post the same once i got the reference materials.
Thank you for all your support.... :)
Thanks,
PC

Target registration in ERP Integrator in the Workspace

Hi,
I'm trying to integrate HFM 11.1.1.3 with E-Business suite R12 using ERP Integrator. Actually, I want to load journal entries from EBS in HFM.
I've successfully registered the source (EBS) and I filled all the ODI details, but I can't register the target (HFM) as the "Target Application" field is empty although I've created application in hfm and in workspace.
I'd appreciate any help.
Thanks in advance.
Ahmed.

FDM is not required.
The same type of mappings can be done in ERPI and FDM. For example 3 accounts in the g/l for coffee, soda, snacks map to one in HFM account.
Using ERPI you will need more in the way of IT skill sets where FDM is constructed more for the Finance user to maintain.
Not that it is that difficult, but moreover you want to buy FDM because the internal controls available would cost you a lot more to script, test, validate, and implement outside of this packaged solution.

Regarding ERP Integrator

Similar Messages

Maybe you are looking for