Regarding Error handling

Hi Experts,
We have an Issue. where and Error messages comes in the Shopping Cart where that error messages is not coming from "Check" Badi.
I've checked the ET_MESSAGES of the Signature of BADI there this error messages does not exist but once the Shopping cart is displayed its showing up this message.
I would like to know is there any other way were we can show up the error messages in SC other than using ET_MESSAGES in Check badi.
My issue is similar to the issue mentioned in the below thread
SRM Error - Budget Almost Exhausted - Availability Control
Hi,
Please deselect check box ' Display Back-End messages as Errors' in the following path,
SPRO> SAP Supplier Relationship Management>SRM Server> Cross application basic settings>Activate Extended Classic Scenario.
With the above setting, back end messages won't display in SRM.
Regards,
Chandolu Ramesh
But, the when I tryed to see the solution as mentioned in that that configuration doesn't exist in SPRO.
Waiting for your reply,
Amar
Edited by: amarnath g on Oct 28, 2009 7:11 PM

Hi,
It looks your SP level is low. Please check the note mentioned in the thread.
SRM Error - Budget Almost Exhausted - Availability Control
Regards,
Masa

Similar Messages

General Inquiry Regarding Error Handling with System Exec.vi

I have a sub vi that uses the System Exec.vi to send SMS messages when triggered. I am confused as to how the error handling works and why all of the errors seem to go to the "standard error" vs the "Error out". The reason I am interested is because I am trying to interrupt the error out of another script to execute a command if error=true.
I have intentionally created an error to test this, however it does not seem that the signal is ever being sent to the error out, only to the standard error.
Any help/explanation as to how this works would be greatly appreciated.

The Facebook discussion board is just a pilot and that functionality is not available yet (as to my knowledge). You will have to use the actual forum thread to add attachments. You can click the arrow just to the right of thread topic in the Facebook thread and that will take you to the ni.com/forums thread. Or you can navigate here:
http://forums.ni.com/t5/LabVIEW/General-Inquiry-Regarding-Error-Handling-with-System-Exec-vi/m-p/246...
Having a look at your VI would help to clarify the error handling issue.
Daniel K | NI Applications Engineer | Certified LabVIEW Developer

Regarding Error handling and customisation in RFC, Idocs and Proxy

Hi,
I wanted to compare RFC, Proxy and Idocs on the basis of the amount of customisation required in ECC when sending data from ECC to XI using the above stated means and also the error handling provided in these methods.
Please let me know in detail if possible.
Regards,
Sampada

Hi ,
Check this blog to know when to use which adapter:
/people/ravikumar.allampallam/blog/2005/08/14/choose-the-right-adapter-to-integrate-with-sap-systems
we use proxy in sap 6.0 version or higher.
Basically used for adapter less communication
& very high volume of data has to be transfered.
Step for Configuration fo IDOC in R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Load Meta Data for IDOC (IDX2)
a) Create new
b) IDOC Message Type
c) Enter port created in IDX1.
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
3) Create Partner Profile (WE20)
a) Create New
b) Create the Partner no. name as same the logical system name of the destination system.
c) Select Partner type LS
d) Enter details for Type: US/USER, Agent, and Lang.
e) Click on the + button to select the message type.
f) Select Partner no. and LS which ever create above.
g) Select Message type
h) Select Process code related to the Message type.
I) save.
In SLD System Landscape Directory
TS for R/3 (Logical system):-Assign the client name created in R/3 as Logical system Name.
Ts for Third Party (Logical system):-
BS for SAP R/3 (Logical system):- Assign the client name created in R/3 as Logical system Name.
BS for Third Party (Logical system):-Enter the XI logical system name.
In Transaction SALE
Define and Assign the logical system name.
Regards,
Vinod.

Regarding error handling in jsp

how can i handle error in jsp page.That means i want to write error or exceptions
in a file if an exception occurs.that meas i want to log that exception with time and date in a log file.how will i do?

There is a logger taglib available (on Jakarta) which works with log4j. You can make use of that.
xH4x0r

Regarding Error handling in Mass Upload of Organizational Structures Using RHALTD00

Hi all,
I am using standard program RHALTD00 for mass uploading of Organizational objects into SAP system. But incase if our input file has any error records, how can we track such errors? Can you please share your inputs.
Thanks,
Cs

Hi Sirisha,
Report RHALTD00 imports the records from the file and creates a batch input
session, which you can process either directly or using batch input
processing:
Batch input processing: When ever you will run the report in this way, error records handled in a session.
Direct processing:
Requirements to run this report is :-
The dataset must contain all of the records of infotype 1000. Only then can
other information be imported in any order that is required.
The dataset must not contain records with workflow infotypes (infotype
numbers from 1200 to 1299). Such records are not included in processing.
Thanks,
Sreeram

Regarding Error Handling by using VBA code

I want to skip the "Server Error in '/' Application" in one page( page 5), and goback to previews worked page (page 4) , continue to next page( page 6).
If errNumber = -1 Then
RSWApp.GoBack
RSWApp.GotoPage (6)
End If
but it didn't go back.

Then try adding the code for GoBack in the Before Play event of Page 5.
If errNumber = -1 Then
blnPg5Err = True
RSWApp.GoBack
End If
Also add a boolean so when you go back to Page 4, you know that the reason you are there is because of error on Page 5. And in the code for Page 4, add validation like
If blnPg5Err = True then
'whatever you need to do
rswapp.gotopage(6)
end if
You will have to declare blnPg5Err in the Shared Module
Public blnPg5Err as boolean.
Hope this works for you.

Regarding idocs error handling

HI . i want to learn idoc error handling on sap xi side because my current project is in PRODUCTION They implemented lot of idocs so is there any documents(guides ) regarding error handling of idocs for both sender and receiver side.

Hi
Please refer File to IDOC Scenario..
the 2nd post (Troubleshooting IDOC scenario) from Swarup Sawant , you will get a very good understanding
as lots of reference links are attached with different scenarios.
Regards,
Srinivas

Error Handling in Automated Activities

Hi experts,
I have a question regarding error handling in automated activities in a BPM Process. I have seen various postings and articles regarding exception handling with boundary events. But it seems that for this to work of course your web service has to support these events.
But lets step on way back: What happens if my process instance cannot access the web service of the automated task because the server is not available for wathever reasons (network down etc.) or the web service call gets a timeout?
Is there a possibliity to handle these kind of problems in the BPM Process and how?
Thanks for your feedback and best regards!
Stefan Brauneis

Hi Abhijeet,
thanks for that! It seems that answers my question. However: There seems to be some room for improvement in SAP NetWeaver BPM in that area.
What is your experience with Reliable Messaging in BPM? Does it work in such a scenario?
Thanks and best regards,
Stefan Brauneis

Error handling limitations in XI3.0 SP11 when using IDOC's

Backround: Sending IDOC's from XI to a 6.20 SAP system with ALEAUD turned on.
We have found a couple of limitations with XI 3.0 SP11 regarding error handling and are wondering what other XI Developers are doing to work around them:
1) Unable to generate Alerts from global Alert Rules (PMI) in a BPM
2) Unable to handle IDOC negative acknowledgments in a BPM
3) Unable to generate Alerts from Alert Rules (PMI) for negative IDOC acks when NOT using a BPM
So far we are designing around these issues by using deadline monitoring steps in BPM's to handle IDOC posting errors and raising an Alert (the beauty of this workaround is that the BPM will automatically continue when the IDOC data is corrected and posted), and for non-BPM interfaces the errors must be handled in the receiving SAP system.
We have sent these issues in to OSS but the replies have come back stating that it is 'by design'.
Thx,
Jason.

Did you get any better solution now?
Regards
Mike

Flex and Coldfusion error handling

Hello! I was wondering if someone could point me in the right direction regarding error handling in a Flex app thats using an HTTPSERVICE RPC to a Coldfusion component.
If a user is entering form data in Flex and clicks submit... the data is sent via the HTTPSERVICE send method as XML to the CFC. But what if there is a Coldfusion SQL insert statement error? Say a user enters a character in a number field (now i know the best thing to do would be to have actionscript ensure that the values entered are numbers but lets keep that aside just for this example). How could I alert the user to let them know the CFC encountered a SQL error? Or better yet... alert them that everything went "A" ok and their data was successfully submitted.
I originally thought to put CFTRY and CFCATCH around the CFC code. I could do that fine, but had trouble passing back a message string so that FLEX could use it in an Alert.Show window.
Thanks!
-BosDog

Hey Mike,
Sorry after I posted I thought "this may be a question for CF guys as well".
I definitely use and love RemoteObjects. Its great for binding to datagrids and to run SQL to return data from the server back to Flex. I've struggled with successfully passing variables from Flex to CF using RemoteObject though. Say a dataform with 5 text fields & 2 combo box dropdowns.
I think you may have forgotten to post the link to the article for me to read... i didnt see it in your last post?
Thanks!

CF8 Webservice error handling

As my title tells you, I have a problem regarding error
handling in webservices.
I've set up an application.cfc where I've implemented
generalised error handling.
Whenever a coldfusion error occurs, this is the place the
error would be caught and properly handled.
I.E.: Don't give the whole stacktrace and the raw coldfusion
error message.
The problem is that, in the case of a SOAP request, the whole
onError method seems to be discarded.
It won't invoke this method. I've tested this using a
<cflog in the onError method.
Sometimes even, when the schema is incorrect it generates an
AXIS exception.
But there's no real way in coldfusion to catch or even handle
this exception.
Does anyone else know about a way to do this in coldfusion?
How can I catch those exceptions on my server and properly
handle them before returning the SOAP fault envelope?

We are implementing synchronus web services(proxy to web services) to sync master data with the external systems
In the above scenario it will be better to intimate the error details to the source system, i.e. option 2.....this will ensure that the source system application (developers/ monitors) are aware that something has gone wrong while processing data in the target.
Option 2. Send the the fault message(system error) to the source let the source system fail the message by not handling
the error, so that you get the alert with the stsndard alert configuration
Ultimately it is the business requirement which needs to be followed.....how does the business want to handle it....is the error required at the source
Regards,
Abhishek.

Apex 4.1 Error handling question

Apex 4.1
Hi There,
Just had a query regarding error handling. As per Apex documentation we can add more information to our error messages. I wanted to add custom text and also the actual Ora or any other message
E.g
begin
if 1=1 then
    l_error := 1/0;
end if;
exception
when others then
    APEX_ERROR.ADD_ERROR (
    p_message          => 'Error1',
    p_additional_info => 'Test1',
    p_display_location => apex_error.c_inline_in_notification);
end;Wanted to know, if we want to add the actual error message also, what do we need to add to the ADD_ERROR procedure? I wanted to record the sqlerrm message.
Thanks

The only problem with the example was I don't think it handles not null constraints real well. Usually have a constraint name like 'SYS_SOMENUMBER'. So as a result, the extract_constraint_name is not successful.
I handled this by doing the following:
if l_constraint_name IS NULL AND p_error.ora_sqlerrm IS NOT NULL THEN
     --NOT NULL constraints don't display the constraint name in the error, find another way
    --Added check for ora_sqlerrm as if there is a page validation, it still enters the function, but with no sqlerrm
        declare
            l_cons_split APEX_APPLICATION_GLOBAL.VC_ARR2;
            l_owner user_constraints.owner%type;
            l_table_name user_constraints.table_name%type;
            l_column_name user_cons_columns.column_name%type;
            l_table_column varchar2(400);
        BEGIN
            --get the section enclosed in parenthesis
            l_table_column := regexp_substr(p_error.ora_sqlerrm, '\([^)]*\)');
            --remove parenthesis and quotes
            l_table_column := regexp_replace(l_table_column, '[(")]');
            --split the data by period
            l_cons_split := apex_util.string_to_table(l_table_column, '.');
            --determine the constraint name by querying user_constraints
            l_table_name := l_cons_split(l_cons_split.COUNT-2);
            l_table_name := l_cons_split(l_cons_split.COUNT-1);
            l_column_name := l_cons_split(l_cons_split.COUNT);
            select uc.constraint_name into l_constraint_name
            from user_constraints uc, user_cons_columns ucc
            where uc.constraint_name = ucc.constraint_name
            and uc.owner = ucc.owner
            and uc.table_name = l_table_name
            and ucc.column_name = l_column_name
            and get_search_condition(uc.constraint_name, uc.owner) like '%IS NOT NULL%'; --gets the search condition as varchar
        END;
    END IF;{code}
That's slightly off topic, but just thought i'd mention it :)

Report and Alert don't executed in the error handler with a JMS proxy service

Hi,
I'm working with OSB 11.1.1.4.0 and I'm facing a problem with the error handler of my JMS proxy service.
My error handler contains two main elements :
- a Report action
- an Alert with a JMS destination defined
When the business service failed the message remain in the queue. It's the expected behavior.
The problem is :
- the report is missing
- the alert is raised but missing in the JMS destination defined in the Alert setting.
I've noticed if I add a Reply with Failure or Success, Report and Alert are successfully executed.
Unfortunately the message don't remain in the JMS queue.
What can I do in order to have my report/alert done and the JMS transaction rollback in order to keep the message in the queue ?
I've already met this problem in the past with alsb v3 and my solution was to add Service Callout in the error handler in order to externalize these actions.
This solution is not convenient and I hope another solution is possible.

Inventorying workgroups can be difficult, especially when it comes to remote access and network security. Because workgroups are not centrally managed, some of the items discussed in this
wiki article on preparing your workgroup environment may require you to visit each machine individually.
For non-domain credentials, you do not use the <systemname>\<user> format, you simply enter the user name. Regarding how to enter the credentials, if you have an account that uses the same username and password on all machines and is an administrator
on all of those machines, then you can enter that in the All computers credentials page of the wizard. You can also do this if they are different user names. However, if some machines have an account with the same user name, such as Administrator,
but different passwords on each machine, you will need to use the Manually enter computer names discovery method, and then enter the information for each group or each machine.
As you can tell, workgroup environments can quickly negate any benefit that the agentless inventory nature of MAP provides.
Please remember to click "Mark as Answer" on the post that helps you, and to click
"Unmark as Answer" if a marked post does not actually answer your question. Please
VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

Error handling in process chain-doubts

Hi ,
I have some doubts in error handling of process chains.
1) I have aprocess load infopackeage and subsequent process is update fromPSA.
process load infopackage got failed , so i loaded the IP manually and repeated the next i.e process update from PSA .
How to correct the process chain from now?
2) I have aprocess load infopackeage and subsequent process is Delete request in infocube .process load infopackage got failed , so i loaded the IP manually and repeated the next process i.e Delete request in infocube. Chain continued by deleting the right request . How this is possible ?
Plz help me as this is urgent and daily i have to deal with this issues. If any documents on error handling is greatly appreciated.
My mail id is [email protected]
Regards,
Pavan

Hi Pavan,
Hope the following links will give u a clear idea about process chains and clear ur doubts.
Business Intelligence Old Forum (Read Only Archive)
http://help.sap.com/saphelp_nw2004s/helpdata/en/8f/c08b3baaa59649e10000000a11402f/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/8da0cd90-0201-0010-2d9a-abab69f10045
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/19683495-0501-0010-4381-b31db6ece1e9
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/36693695-0501-0010-698a-a015c6aac9e1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9936e790-0201-0010-f185-89d0377639db
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/3507aa90-0201-0010-6891-d7df8c4722f7
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/263de690-0201-0010-bc9f-b65b3e7ba11c
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
Errors in monitoring of process chains can be categorized into 4 different sections...
Master data - Full Update
Master data - Delta Update
Transaction data - Full Update
Transaction data - Delta Update.. in terms of loading of data which can be due to server shut down or system maintenance... errors due to incorrect entries in the OLTP system in which case you'll have to fix the errors in the PSA and manually load the data...
Otherwise it can have errors on Attribute change run being locked by some other job... Aggregate Roll up failing because of attribute change run being run at the same time... Problem with hierarchies and save hierarchies...
There can be problems with the data store activation if the ODS object contains any incorrect request sitting inside it... then, you need to delete the incorrect request and reload the data again...
In case of Transaction Delta failure, you'll have to request for a repeat either manually in the infopackage or using the repeat option if available on right clicking the load event...
For Master Data Delta failures, you need to do an Re-init by deleteing the previous initalization condition in the "initalization option for source systems" in the menu scheduler or reschedule the enitre chain... because, master data generally do not support repeat of last delta ...
U can even look into these links:
/people/siegfried.szameitat/blog/2006/02/26/restarting-processchains
For common data load errors check this link:
/people/siegfried.szameitat/blog/2005/07/28/data-load-errors--basic-checks
****Assign Points if Helpful****
Regards,
Ravikanth.

Error handling function: ORA-20001: get_dbms_sql_cursor error:ORA-00942: table or view does not exist is not trapped. Why?

Why APEX 4.1 Error handling function does not trap the error of missing table?
Say, I create simple application with single IR report page and I also assign standard simple error handling function.
Function works perfectly, except but this case:
If I just drop a table used by report page and then refresh the page I am getting usual APEX error message:
ORA-20001: get_dbms_sql_cursor error ORA-00942: table or view does not exist
and error handling function is not invoked at all.
Is this a feature or a bug?

Hi,
Check the corrections given in the note 990764:
Reason and Prerequisites
Up to now, using a characteristic with its own master data read class as the InfoProvider was not supported. This is now released but it is not available for all modelings. Using the attributes in the query is not supported for characteristics that have their own master data read class. Using the attributes in the query causes a termination. The following errors may occur in this case:
ORA-00942: table or view does not exist
Fehler in CL_SQL_RESULT_SET Include NEXT_PACKAGE
RAISE_READ_ERROR in CL_RSDRV_VPROV_BASE
Solution
SAP NetWeaver 2004s BI
Import Support Package 11 for SAP NetWeaver 2004s BI (BI Patch 11 or SAPKW70011) into your BI system. The Support Package is available once Note 0914305 "SAPBINews BI 7.0 Support Package 11", which describes this Support Package in more detail, has been released for customers.
In urgent cases you can implement the correction instructions.
The correction instructions contain the tightened inspection for characteristics.
Regards,
Anil Kumar Sharma .P

Regarding Error handling

Similar Messages

Maybe you are looking for