Regarding error in GUI_UPLOAD FM

Dear all,
i got an error mesaage in GUI_UPLAD FM when i m uploading a file in to it .
error message " Recursive occurrence of virus scan profile /SCET/GUI_UPLOAD in the sequence /SCET/GUI_UPLOAD"
please give me any solution how to slove it.
thanks in advance
abhilash

Solved by self
see this link for ans.
https://cw.sdn.sap.com/cw/docs/DOC-113596?decorator=print

Similar Messages

General Inquiry Regarding Error Handling with System Exec.vi

I have a sub vi that uses the System Exec.vi to send SMS messages when triggered. I am confused as to how the error handling works and why all of the errors seem to go to the "standard error" vs the "Error out". The reason I am interested is because I am trying to interrupt the error out of another script to execute a command if error=true.
I have intentionally created an error to test this, however it does not seem that the signal is ever being sent to the error out, only to the standard error.
Any help/explanation as to how this works would be greatly appreciated.

The Facebook discussion board is just a pilot and that functionality is not available yet (as to my knowledge). You will have to use the actual forum thread to add attachments. You can click the arrow just to the right of thread topic in the Facebook thread and that will take you to the ni.com/forums thread. Or you can navigate here:
http://forums.ni.com/t5/LabVIEW/General-Inquiry-Regarding-Error-Handling-with-System-Exec-vi/m-p/246...
Having a look at your VI would help to clarify the error handling issue.
Daniel K | NI Applications Engineer | Certified LabVIEW Developer

Dump regarding 'Error in module RSQL 'in dynamic internal table

Here is a Dump regarding 'Error in module RSQL of the database interface'.My program runs fine if 100 rows is getting selected from SAP Table.But for mass selection program is giving Dump. The program has dynamic selection of any SAP Table with dynamic selection ranges.I have attached below snippet code for your understanding and analysis.
Looking forward your kind support.
* Select Data from table using field symbol which points to dynamic table with packet size
SELECT *
    INTO CORRESPONDING FIELDS OF TABLE <fs_table_tmp>
    FROM (p_table) PACKAGE SIZE p_packet.
    INSERT LINES OF <fs_table_tmp> INTO TABLE <fs_table> .
    UNASSIGN <fs_table_tmp> .
ENDSELECT.

Hello Salmali,
Are you checking in the debugger mode?
Error CX_SY_OPEN_SQL_DB comes when there is any pause between select and endselect.
one more thing use INTO in place of APPENDING.
SELECT (i_field_select)
    FROM (p_table)
    into CORRESPONDING FIELDS OF TABLE <fs_table_tmp>
    PACKAGE SIZE p_packet.
    append LINES OF <fs_table_tmp> INTO TABLE <fs_table> .
    Refresh <fs_table_tmp> .
ENDSELECT.
Please let me know what is the value of p_packet.
also have you created the table <fs_table_tmp> and <fs_table> of same type . Please check
Thanks,
Gaurav

Regarding unicode error in gui_upload

in 4.6c cancel and filename is passed in importing in download .after unicode checks how to pass cancel in gui_upload and how ever filename is present in exporting parameters in gui_downlaod there is no cancel parameter in gui_download. plz any one have any idea on where to pass cancel parameters in gui_download
CALL FUNCTION 'DOWNLOAD'
    IMPORTING
           ACT_FILENAME        = V_pcfile
                CANCEL              = CANCEL_FLAG

hi ram, maybe u can check the subrc when u press cancel,i think the value is 9,from there u can proceed to your logic

Error in gui_upload

hi guru,
iam doing some bdc program.. but ity will going to dump on gui_upload.. so plz help me.
An exception occurred that is explained in detail
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_TYPE', was
not caught in.
procedure "F_UPLOAD_FILE" "(FORM)", nor was it propagated by a RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The call to the function module "GUI_UPLOAD" is incorrect:
The function module interface allows you to specify only
fields of a particular type under "FILENAME".
The field "P_P_FILE" specified here is a different
field type
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME TITLE text-h01.
PARAMETERS: p_file LIKE rlgra-filename
SELECTION-SCREEN : END OF BLOCK b1.                                                                                .----
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
PERFORM f_get_file USING p_file.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
*EXPORTING-
CHANGING
FILE_NAME           = p_p_file
endform.
form f_upload_file using    p_p_file.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME                      = p_p_file
FILETYPE                      = 'DAT'
endform.

Hi,
Refer the program given below. it is working fine for me.
make the paramerter as:
pa_dfile TYPE rcgfiletr-ftfront.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pa_dfile.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
    EXPORTING
      static        = 'X'
      mask          = '(Text file|*.TXT'
    CHANGING
      file_name     = pa_dfile
    EXCEPTIONS
      mask_too_long = 1
      OTHERS        = 2.
IF sy-subrc <> 0.
    MESSAGE ID 'PG' TYPE 'E' NUMBER '016'
          WITH 'Error in F4 help'(005).
    "The provided file is not an excel sheet.
    RETURN.
ENDIF.
DATA: lv_filetype(10) TYPE c,
        lv_gui_sep TYPE c,
        lv_file_name TYPE string.
lv_filetype = 'ASC'.
lv_gui_sep = 'X'.
lv_file_name = pa_dfile.
FM call to upload file
CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
      filename                = lv_file_name
      filetype                = lv_filetype
      has_field_separator     = lv_gui_sep
    TABLES
      data_tab                = gi_table
    EXCEPTIONS
      file_open_error         = 1
      file_read_error         = 2
      no_batch                = 3
      gui_refuse_filetransfer = 4
      invalid_type            = 5
      no_authority            = 6
      unknown_error           = 7
      bad_data_format         = 8
      header_not_allowed      = 9
      separator_not_allowed   = 10
      header_too_long         = 11
      unknown_dp_error        = 12
      access_denied           = 13
      dp_out_of_memory        = 14
      disk_full               = 15
      dp_timeout              = 16
      OTHERS                  = 17.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Hope it helps.
Regards
Rajesh Kumar
Edited by: Rajesh Kumar on Jul 24, 2009 7:11 AM

Getting CONTROL_FLUSH_ERROR error with GUI_UPLOAD

Hi Friends
In my Report I am using the FM: GUI_UPLOAD and while running the report in foreground, I am getting the proper results. But while running the same in Background I am getting the error: CONTROL_FLUSH_ERROR .
As my understanding ,to resolve this we have to upgrade the sap gui.
Can anyone suggest me the exact reason for this error and the solution as well.
Points are assured for useful answers.
@SAP GURUS: I am eagerly waiting for your help and suggestions on this.
Regards,
Sree

Hi,
As far as i know, there is no note for this. this is the functionality of GUI_UPLOAD>
GUI_* and WS_* function modules are not designed to work in that way, as they need to access your personal computer file.
To choose the correct download method to used, you can check the value of SY-BATCH in your code, check if background or foreground mode and then execute.
Hope this helps. Pls reward points if useful.
Shruthi

Regarding Error in Tax Codes after Creation of Excise Invoice.

Dear All,
We are using TAXINN Procedure,I have maintained condition records and given the correct tax codes in them for Basic Excise Duty,Secondary Cess and Higher Secondary Cess on the table 357,however after checking the accounting document which is created post creation of excise invoice the wrong tax codes are getting picked up however when i create my commercial invoice and check the tax codes the correct tax codes are coming,please advice what needs to be done to rectify this error.
Best Regards
Atul Keshav

This query is now resolved

Regarding Error message in ME_PROCESS_PO_CUST badi for validation.

hi Friends,
I am Using ME_PROCESS_PO_CUST badi for validation in Purchase order (ME21N),
For that I implemented PROCESS_ITEM method which fires during each row now i add another validation in same implementation for plant should be same through out the all line item. Now following code is woking fine but when for second line item user changese plant then it shows error message as per logic which is fine but even after changing plant to correct one the error message is still coming why is it so?
following is my current validation code
method IF_EX_ME_PROCESS_PO_CUST~PROCESS_ITEM.
DATA:ls_poitem TYPE mepoitem,
       ls_poitem_set TYPE mepoitem.
DATA:ls_poheader TYPE MEPOHEADER.
DATA:lm_poheader TYPE ref to IF_PURCHASE_ORDER_MM.
DATA:w_mara TYPE mara.
DATA:IT_ZMMTBL039 TYPE STANDARD TABLE OF ZMMTBL039 ,
       WA_ZMMTBL039 TYPE ZMMTBL039 .
DATA:ls_poitem1 TYPE mepoitem.
DATA:V_KUNNR1 TYPE KNA1-KUNNR.
DATA:V_KUNNR2 TYPE KNA1-KUNNR.
DATA:W_WERKS(4),
       w_werks_tmp(4),
       w_flag(1).
ls_poitem = im_item->get_data( ).
lm_poheader = im_item->GET_HEADER( ).
ls_poheader = lm_poheader->GET_DATA( ).
IF ls_poitem-werks IS NOT INITIAL.
    w_werks = ls_poitem-werks.
    import w_flag to w_flag from MEMORY ID 'FLAG'.
    if w_flag is initial.
      w_flag = 'X'.
      EXPORT w_werks_tmp FROM w_werks TO MEMORY ID 'MEMO1'.
      export w_flag from w_flag to MEMORY ID 'FLAG'.
      clear: w_flag.
    endif.
ENDIF.
IMPORT w_werks_tmp TO w_werks FROM MEMORY ID 'MEMO1'.
break swaroopb.
IF ls_poitem-werks NE w_werks.
      MESSAGE E010(zparts) with 'Different plants are not allowed in single PO.'.
ENDIF.
CLEAR: WA_ZMMTBL039,w_mara.
REFRESH:IT_ZMMTBL039[] .
SELECT *
    INTO TABLE IT_ZMMTBL039
    FROM ZMMTBL039
   WHERE bsart EQ ls_poheader-bsart.
IF sy-subrc EQ 0.
    CLEAR: WA_ZMMTBL039,w_mara.
    SELECT SINGLE *
      INTO w_mara
      FROM mara
     WHERE matnr EQ ls_poitem-MATNR.
    IF SY-SUBRC EQ 0.
      READ TABLE IT_ZMMTBL039 INTO WA_ZMMTBL039 WITH KEY bsart = ls_poheader-bsart
                                                          mtart = w_mara-mtart
                                                          spart = w_mara-spart.
      IF SY-SUBRC NE 0.
        MESSAGE E009(zparts) WITH ls_poitem-MATNR w_mara-spart ls_poheader-bsart .
      ENDIF.
    ENDIF.
ENDIF.
end method

Hello Swarup
Since you want to compare all items together (having the same plant) I would suggest to implement this logic either in method CHECK or POST of the interface.
However, if you want to make your checks within the PROCESS_ITEM method then you should change your logic.
It does not make sense to work with the ABAP memory within a BAdI implementing class because the class itself is your "memory".
I would use the following logic to implement your validation:
lo_poheader = im_item->get_header( ). " retrieve header instance
lt_items = lo_poheader->get_items( ).   " retrieve all items
ls_detail_x = im_item->get_detail( ). " details of currently processed item
LOOP AT lt_items INTO ls_item.
    ls_detail = ls_item-item->get_detail( ).
    IF ( ls_detail-werks NE ls_detail_x-werks ). " validation failed
    " do something...
   ENDIF.
ENDLOOP.
However, I would prefer to do this kind of validation in CHECK or POST method.
Regards,
Uwe

Regarding Error in Migo

Dear All,
Through transaction code called Migo we are creating the return delivery for a stock transport purchase order by giving the inputs as the material document we have flagged the item as okay and also checked the box which indicates via delivery and captured all details pertaining to invoice however when we are trying to post the item the following error comes.
Data for creating a delivery is incomplete (Vendor)
Message no. M7279
Diagnosis
The system found that the data required to create a delivery via Shipping is not complete.
System Response
The system cannot create a delivery.
Procedure
Check that the data for Vendor is maintained in your system:
loading group
debtor number
sales organization
distribution channel
division
shipping condition
shipping point
Regards
Atul kESHAV

Hello Atul,
Kindly check whether you have maintain Delivery Plant in your Vender Master Data? To do this, Kindly make following updation in your XK02.:'
Choose Purchasing Data Tab and goto menu bar and look for additional data and update Delivering plant there. If you are not able see the same in XK01 then activate the same field in Vendor master data:vendor account group.
If still the problem remains then kindly take MM consultant's help for the same.
Take care.
JP

Regarding Error in Materialized view Fast Refresh

ORA-12015: cannot create a fast refresh materialized view from a complex query
CREATE MATERIALIZED VIEW MVCONTENTHISTORY_01
BUILD IMMEDIATE
REFRESH FAST
WITH PRIMARY KEY
ENABLE QUERY REWRITE
AS
SELECT a.DAY, a.contentname,
SUM
(CASE
WHEN (b.subscriptionstartdate) <= (a.DAY)
AND ((CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (a.DAY)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
) <=
(CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (b.subscriptionenddate)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
THEN 1
ELSE 0
END
) COUNT,
COUNT
(CASE
WHEN (b.subscriptionstartdate) <= (a.DAY)
AND ((CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (a.DAY)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
) <=
(CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (b.subscriptionenddate)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
THEN 1
ELSE 0
END
) cnt
FROM TBLTDATEWISECONTENT a,
(SELECT TRUNC (a.subscriptionstartdate) subscriptionstartdate,
TRUNC (a.subscriptionenddate) subscriptionenddate, b.NAME,
b.contentid
FROM syntbltcontentsubscrhistory a, syntblmcontent b
WHERE b.contentid = a.contentid(+)) b
WHERE a.contentid = b.contentid(+) AND a.DAY = b.subscriptionstartdate(+)
GROUP BY a.contentname, a.DAY;
I can't create Materialized view with fast Refresh .
Kindly provide solution .
Regards,
nayana chavda.

Kindly provide full Oracle version since option vary by release.
There error message says it is impossible to fast refresh based on a complex query.
On 10g Oracle provides a package procedure that will tell you why the view cannot be fast refreshed: dbms_mview.explain_mview.
Otherwise see the Advanced Replication Manual for a list of restrictions.
10gR2 >>Restrictions for Materialized Views with Subqueries
The defining query of a materialized view with a subquery is subject to several restrictions to preserve the materialized view's fast refresh capability.
The following are restrictions for fast refresh materialized views with subqueries:
Materialized views must be primary key materialized views.
The master's materialized view log must include certain columns referenced in the subquery. For information about which columns must be included, see "Logging Columns in the Materialized View Log".
If the subquery is many to many or one to many, join columns that are not part of a primary key must be included in the materialized view log of the master. This restriction does not apply to many to one subqueries.
The subquery must be a positive subquery. For example, you can use the EXISTS condition, but not the NOT EXISTS condition.
The subquery must use EXISTS to connect each nested level (IN is not allowed).
Each table can be in only one EXISTS expression.
The join expression must use exact match or equality comparisons (that is, equi-joins).
Each table can be joined only once within the subquery.
A primary key must exist for each table at each nested level.
Each nested level can only reference the table in the level above it.
Subqueries can include AND conditions, but each OR condition can only reference columns contained within one row. Multiple OR conditions within a subquery can be connected with an AND condition.
All tables referenced in a subquery must reside in the same master site or master materialized view site.
<<
HTH -- Mark D Powell --
Message was edited by: added list of restrictions left off initial post
mpowel01

Regarding Error Message for the purchase order

Hello SRM Experts,
The Status of the purchase order is Archived and PO is not transferred to the backened system. I ran the transaction bbp_pd_po_transfer_exec in P36 and check the error message in T-Code RZ20, i get the following error in RZ20 for the PO as:
1. Error reading the export data for EXEC of purchase order
2. and in P36 system, when i press F5, popup message appears - Error while reading PO in backened system. Inform System administrator.
I want to know, why this problem appears and how to resolve this issue ?
Thanks in Advance,
Regards,
B.Satyanarayan Reddy

Hello,
I checked in the bbp_pd and there also i got the popup message as Error while reading PO in backened system. Inform System Administrator.
I also checked with the backened team, everything seems to be fine there.
The thing is that PO is not transferred to the backened system since 13.02.2008 to till date and it stuck up in the EB system.
Kindly let me know, why this problem occurs and what should i do to resolve the issue.
Thanks in advance,
Regards,
B.Satyanarayan Reddy

Regarding error "Field symbol is not assigned." during print preview

Hi experts,
    I am getting dump while trying print preview for particular POs in ME23n transaction(ECC 6.0). Please refer the below dump error:
Runtime Errors         GETWA_NOT_ASSIGNED_RANGE
Date and Time          29.09.2009 19:30:39
Short dump has not been completely stored (too big)
Short text
     Field symbol is not assigned.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPLSTXC" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     A field symbol that was not assigned was accessed
     (data segment no. 32769).
    The field symbol is no longer assigned because there was an attempt
    makde previously in a Unicode program to set the field symbol using
    ASSIGN with offset and/or length specification. Here, the memory
    addressed by the offset/length specification was not within the
    allowed area.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "GETWA_NOT_ASSIGNED_RANGE" " "
    "SAPLSTXC" or "LSTXCFFT"
    "FT_COMPOSE"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
   2. Corresponding system log
      Display the system log by calling transaction SM21.
      Restrict the time interval to 10 minutes before and five minutes
   after the short dump. Then choose "System->List->Save->Local File
   (Unconverted)".
   3. If the problem occurs in a problem of your own or a modified SAP
   program: The source code of the program
      In the editor, choose "Utilities->More
   Utilities->Upload/Download->Download".
   4. Details about the conditions under which the error occurred or which
   actions and input led to the error.
I am getting this dump only for few POs.. Rest of the POs are able to print. I am not able to find notes for this issue. Is there any SAP notes available for that or Is there any configuration issue related to this?
Please provide solution for thsi as soon as possible.
Thanks and Regards
Subbu

A field symbol is not assigned, but thats what the dump is telling you. Mostly this happens, when fields or function modules are stored by name, like the fieldnames in the fieldcatalog in an ALV report. It a field referenced in such a way does not exist you will get this error. Always store fieldnames and function names in capital letters and check mistyping of 1L 8B and so on.

Regarding error in webdynpro - ABAP

Hi friends,
i got error " Error in generated code,Interface expected after interfaces " while activate the object.Please reply as soon.
Regards
krish

Hi Krish,
Please create an OSS ticket that describes the problem and provides instructions to reproduce it.
Best regards,
Thomas

Regarding error in fast refresh for Materialized

ORA-12015: cannot create a fast refresh materialized view from a complex query
CREATE MATERIALIZED VIEW CRESTELVIEWSDEV510.MVCONTENTHISTORY
TABLESPACE CRESTELVIEWSDEV510
NOCACHE
LOGGING
NOCOMPRESS
NOPARALLEL
BUILD IMMEDIATE
REFRESH FAST
ENABLE QUERY REWRITE
AS
SELECT a.DAY, a.contentname,
SUM
(CASE
WHEN (b.subscriptionstartdate) <= (a.DAY)
AND ((CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (a.DAY)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
) <=
(CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (b.subscriptionenddate)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
THEN 1
ELSE 0
END
) COUNT,
COUNT
(CASE
WHEN (b.subscriptionstartdate) <= (a.DAY)
AND ((CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (a.DAY)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
) <=
(CASE
WHEN b.subscriptionenddate IS NOT NULL
THEN (b.subscriptionenddate)
ELSE TO_DATE ('01/20/1990', 'MM/DD/YYYY')
END
THEN 1
ELSE 0
END
) cnt
FROM TBLTDATEWISECONTENT a,
(SELECT TRUNC (a.subscriptionstartdate) subscriptionstartdate,
TRUNC (a.subscriptionenddate) subscriptionenddate, b.NAME,
b.contentid
FROM syntbltcontentsubscrhistory a, syntblmcontent b
WHERE b.contentid = a.contentid(+)) b
WHERE a.contentid = b.contentid(+)
AND a.DAY = b.subscriptionstartdate(+)
GROUP BY a.contentname, a.DAY;
while creation time of this Materialized I have receive above error ORA-12015
I have also crated log with Primary on all base tables and index on column that is in where clause.
Kindly provide solution .
I want to create this MV with FAST Refresh.
Regards,
nayana chavda.

What's your Oracle version?
The error is pretty self explanatory. You can not build fast refresh MView with complex query.
check Oracle document,
http://download.oracle.com/docs/cd/B19306_01/server.102/b14226/repmview.htm#BABEEHGJ
To be fast refreshed, the defining query for a materialized view must observe certain restrictions. If you require a materialized view whose defining query is more general and cannot observe the restrictions, then the materialized view is complex and cannot be fast refreshed.
...

Regarding Error Message   in SXMB_MONI ...!

Hi Experts ,
I am working on a Scenario where i have sender side an Table which i need to pass to SAP ECC System
Sender Channel JDBC
Receiver Channel :IDOC
i am using Sender Bussiness Service and Receiver as Bussiness System
When the message is triggred from Oracle Table ie (Sender Legacy System) am getting an Error in moni with Error Status "Unable to convert the sender service BSRV_ICFS to an ALE logical system"
what might be the issue to solve this . is it advisable to have At Sender Bussiness Service or Bussiness System whenever we are sending Data to IDOC (as Receiver )
Kindly help me with this problem
Regards,
Aziz khan .

Hi Aziz,
   please check these links
http://wiki.sdn.sap.com/wiki/display/XI/UnabletoconvertSendersystemtoALElogicalsystem
Unable to convert the sender service to an ALE logical system
regards
Anupam

Regarding error in GUI_UPLOAD FM

Similar Messages

Maybe you are looking for