Regarding Error in Source System.

Hello,
Need help,
When i try to create a Source System (SAP System).
Firstly i have connect both the system (BW to R/3) via T-Code SM59 (RFC Connection) then it shows connected.
After that, creating a Source System (RSA1) then
it shows error " Message no. R3077 ".
Any help would be appreciated.
Regards
Kshitij

Hi,
Please check the docs below.
Connection between Source Systems and BW
http://help.sap.com/saphelp_nw70/helpdata/en/00/dc54384ac9a81be10000009b38f8cf/frameset.htm
Creating SAP Source Systems
http://help.sap.com/saphelp_nw70/helpdata/en/ac/4a4e38493e4774e10000009b38f889/frameset.htm
BW connectivity(.doc)
http://help.sap.com/bp_biv335/BI_EN/BBLibrary/documentation/B84_BB_ConfigGuide_EN_DE.doc
Regards.

Similar Messages

Error in source system in BI 7.0...

Hi,
When creating a source system in Bi 7.0, when i am going to t code- rsa1- client-right click and then check,it's giving an error like:
EDI- partner profile not available and then detail for this error is-- a partner profile cannot be found with this key- /DBICLNT300/LS
THIS INVLOVES THE KEY FIELD OF THE TABLE EDPP1-
PARNUM-PARTNER NUMBER
PARTYP-PARTNER TYPE
Please help me in solving this. Thank You.

Hello,
Try a restore on your source system (rightclick -> restore) This way idoc ports and agreements are regenerated between BW and R/3. If this does not solve the problem ceck this:
Hi,
Did you do a system copy for BW ?
Try a restore (rightclick on your source system) in most cases this will solve the problem.
If not check the notes below:
184322 Procedure after DB copy of BW source systems
886102 System Landscape Copy for SAP BW 2.X, 3.X and NW2004s BI
325470 Activities after client copy in BW source systems
325525 Copying and renaming systems in a BW environment
184754 Procedure after BW database copy
184447 Building a BW-system landscape
184971 Notes on BW source system connections
140276 Error in source system assignment
524554 Storing destinations in the BW environment
538052 Maintenance of Myself destination in BW
Regards, Patrick Rieken

"Error in source system" while creating source system

Hello,
I don't know what's our general problem (I suppose that it's ageneral problem) but we always have the following eror while creating a source system:
When we want to create a source system on BI, we first get an error "No connection to source system possible". After checking the RFC connection and correct the password of the remote user on the automatically created _DIALOG RFC connection the exception changes to "Error in source system".
The error occurs after the information "Please log on as an administrator in the following screen".
The remote user on R/3 side has got profiles S_BI-WHM_RFC and S_BI-WX_RFC (found two conflicting statements regarding this profiles), on BI side it has got SAP_ALL and some more profiles
What else could be the problem?
Greetings & Thanks
Bettina

Hello,
now we know that
1. the remote user needs profiles SAP_ALL and SAP_NEW and has to be dialog user with a password unequal that password it should have in the future (otherwise you don't see the error messages that appear during the login process)
2. the system has to be changeable (scc4 and se03)
After the source system is created the changeability can be changed to the original values and the remote user can be changed to a communication user again.
Thanks for the tip regarding the authorizations.
Greetings
Bettina

Error in Source System While Uploading Data from ODS to Data Target

Hi All,
Iam getting Following Error while Uploading data from ODS to Data Target
a) Error in Source System.
b)DataSource 80MKT_DS01 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80MKT_DS01 does not have the status of the source system in the Business Information Warehouse.
The time stamp in the source system is 21.06.2005 07:31:33.
The time stamp in the BW system is 27.11.2004 17:41:45.
Regards,
Chakri

This generally occurs when you change the data source or enhance the data source or the coonections to the datasoiurse are broken. To resdolve thius sort of errors just
1. Check for the coonect between the sourse & target systems
2 . Replicate the data sourcses.
3. Acivated TR,UR,& the rest of the flow But check in the source system if the structre is modified & is so do the changes in the IS , TR,UR correspondingly & the try to load .Hoppe it allows you to load .
Thanks ,
PSG

Error while source system creation/Source system transport

Hi,
     In our BW implementation, the system landscape is only 2 servers. One is BW Dev, another is BW Prd. All configurations are done in BW Dev and I extracted the data from QAS for this BW Dev system.
     Since we cant create the source systems in the BW Production system, I tried to create the source system for the SAP R3 Production system in BW Dev and trying to transport this to BW Production Instance.
     I have two queries.
1. Is this way is correct for creating the Source System for BW Production system?
2. When I tried to activate the source system I am getting the following error messages. (I tested the RFC Destinations. There is no problem, I also done the configurations for logical system creation and client assignment in both the systems).
Error in source system GWPCLNT900
     Message no. RSAR502
Diagnosis
     With Remote Function Call to system GWPCLNT900 error connection closed
     (no data) ccurred.
Procedure
     Remove the cause of the error.
When tried again I got the following error message
Basic type ZSBB030 doesnt exist. EA 447
Result of the destination check: Timeout RSAR 375.
Could anyone throw some light on these errors?
Thanks in advance.
Krishna

Hi,
you need to maintain the logical systems on both R/3 and BW. You also need to set up the RFC connection with users that can log in to the other system. The R/3 system must be open for customizing in scc4.
In transaction se03 the system change options for 'Business Information Warehouse: SAP Namespace' and 'Business Information Warehouse: Customer Namespace' may need to be modifiable. I am not completely sure about this.
The last thing I will mention is that I have seen source system creation fail when the RFC-users are system users, and the source system creation worked if the RFC-users was display user while creating the source system. The RFC-users must be changed back to system user later...
Please look at best practice documents on a more step-by-step guide...
Best regards,
Christian Frier

Urgent Help! Errors in source system(RSM 340)

Need urgent help. Issue in production.
I added fields to the COPA datasource, by changing the operating concern. I recreated the datasource with the same name replicated into BW & ran delta again. The whole procedure worked fine in Dev & Quality but in production it gives me the below error. I thought its a delta issue so I deleted the data & try reload but still same issue. Below is the error. I checked the connection with R3. its an ok. All other loads work fine. Before deleting delta, it gives below error & when you rerun, it finishes with zero records. I also tried activating update, transfer & ods & cube in BW. I also asked functional guy to check operating concern & its active. kindly help
Errors in source system RSM 340
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.

Hi PK,
caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
i think you get the error message as follows. file is in the client workstation as like.
better you contact basis people. they will resolve this.
hope this help you
Regards
Harikrishna N

DYNPRO_SEND_IN_BACKGROUND errors in source system

Hi All,
Yesterday night we kicked DELTA Process Chain.
The PC failed While loading the 0GL_ACCOUNT Attributes, and showing the message Errors in Source System.
and also Failed at Cost Element Attributes but both the error messages are same.
Checked the source system connections and repeated the process, but it was failed again. and tried to load manually and again failed.
When we check the DUMP in Source system (ECC) in ST22 showing the message as below:
"DYNPRO_SEND_IN_BACKGROUND" Current screen: "SAPLSTRD " 0351
Note: We ran FULL load day before yesterday and Ran INITIAL yesterday, We are running DELTA TODAY.
one thing is we just deleted the GL attirbutes Requests manually and loaded INIT , we are able to do INIT load perfectly. but while trying DELTA only this problem is causing.
Thanks in Advance,
Teena

Hello ,
Sometimes the problem happens because the background users do not have the correct authorization. Please check the information in the SAP note 150315.
Kind Regards,
Des

Failure of infopackage step in process chain - Error in source system.

Hello Experts,
We are experiencing this during the execution of process chain.
All the step for data loads within BW(DSO to DSO, DSO to cube) are failing with error -
- Error in source system
- Error during data selection
Please note that we are 3.5 data flow and thus, data load within BW is through emulated data source and the infopackage. Steps running such infopackages for emulated data source are failing in process chain with error above.
Surprisingly, when I run the infopackage manually out of process chain it runs successful without any error. But when I run through process chain it fails.
Any clue or suggestion? We have already tried doing re-initialization for infopackage.
Appreciate your inputs.
Regards,
PK.

Hi,
When we run data loads thru process chain it will run in background. as per the available background application servers your request will be processed.
as my your during your load time server will be on high load.
please check your system busy schedule and schedule your process chains.
Check Tx - SM50, if you have less application servers, then ask basis to create few more to application servers to process the request at busiest time.
check about increasing parallel processing and default data transfer settings.
go to info package---> menu scheduler--> data settings for default data transfer.
Thanks

Error deleting source system with error message: "incorrect input for....."

Hi,
I'm trying to delete the source system using tcode RSA1 => Source systems => select the 'source system' and delete, but I got an error message as follows:
"incorrect input for activating transported shadow IPacks"
Fyi, I have opened up the client configuration (SCC4) prior to delete this source system but the source system still cannot be deleted and I receive the above error message.
Please let me know what is the caused of the error and how to solve the problem.
Thanks for your kind help.
Regards,
Mark

Hi Mark,
Which version of BW are you in?
check this thread and also the note 709581
Error Deleting Source system connection
Thanks,
Raj

Errors in source system

Hi Friends,
 I got an failure with a data load... The data was loading into ODS from r/3. The data source name 2lis_03_bf... I got an error like this in status Tab -
Error message from the source system
Diagnosis
An error occurred in the source system.
System response
An error occurred in Extractor .
Check the error message.
Procedure
The procedure for removing errors takes place depending on
the error message:
Note
If the source system is a Client Workstation, then it is possible that the file that was to be loaded was being edited at the time of the data request. Make sure that the file is in the specified directory and is not being edited, and restart the request.
And when we click on the error message push button... we are having the following errors : -
Message Type Message Class Message Class 
Errors in source system RSM 340
Queue 2LIS_03_BF is not available in the source system RSQU 9
Activation of data records from ODS object terminated RSM1 102
Answering Getz appreciated,
Thanks & Regardz,
Aluri

Hi,
On BW go to SE16. Look at RSSDLINIT table. Match up the LOGSYS with your OLTPSOURCE (for the infopackage that is causing the problem).
Delete that line
Now you can open the infopackage. (be sure to delete the initialization) before you run the info pack again.)
Regards
Srini

Get Error in source system when loading flatfile from application server

Hi
I'm loading data from flatfiles on the application server. In the datasource if I display the sample data. It shows fine.
But when I execute the infopackage I get an error when it is loading the data to PSA.
The error is
Error in source system
Message no. RSM340
There is no further information
But if I load from my machine it works fine.
Any help will be great

Hi,
As you can view display the sample data. It shows fine.
It mean there is no issues in BW (File path is correct, Data in Flat file is correct).
Then definetely its with the source system, which is resisting to pass IDOC to BW.
Now.we need to know the its problem with File on App serv or App serv itself?
Just check trying to Load another Flatfile in App serv.
Let me know.
Regards
Hari

Delta loading master data errors in source system Message RSM340 quality

Hi,
I'm trying to load with delta master data for standard data sources.
In dev, everything seems fine.
I' ve transported the same elements to QA. I've done init, it is ok. I do delta, I get red status: Errors in source system, message no. RSM340. I've tried to put my delta on green, I've remade my init, I've reloading with delta, and I get the same problem.
I have this problem for all master data loading.
Should I install some infoobject from Bi Content?
Thanks a lot !

Hi,
Check following threads
[3003 + R3299 + RSM340] error messages loading an ODS
Extraction failed with error Message no. RSM340
BW Data Loading - Delta Processes
Thanks and regards
Kiran

Delta Loads failling after system copy with error in source system(RSM340)

Hi Guru's
We recently performed system copy in BI side.I am facing same issue in couple of chains.Process chains are failing at delta loads with error in source system(ERROR IN SOURCE SYSTEM-message no-RSM340 ).When I go for repeat option ,delta loads are running fine.I did some research regarding RSM340 and I found note:1576331.
But my system is not showing any 'Time Inconsistencies'.So.I was not able to find any clue about it.
Could anybody help me out in this aspect.
Thanks!!!
Kuldeep

Hi,
Check whether the profiles that ran in background have the following authorizations.
The RFC user on BW, receiving data from OLTP system, should have S_BI-WHM_RFC and S_RS_ALL in the user profile.
The RFC user on OLTP, receiving request from BW system, should have S_BI-WX_RFC, S_IDOC_ALL, and, B_ALE_ALL in the user profile.
Regards .

CO-PA Delta load - Errors in source system RSM 340

Hi,
We are facing a unique error when we do a CO-PA delta load. The error message is as follows:
"Errors in source system RSM 340,The selected data source is locked by another process RD 156"
The load completes successfully with 0 delta records fetched. When we re - trigger this after sometime, the load goes through.
Can anyone explain as to why this issue occurs ? Basically, looking at the root cause.
We are pulling data from CE1XXXX table, the delta for which is pulled into BW with the setting of 30 minutes safety delta. Just wanted to understand how is it that in this scenario we are faced with a lock issue ? It is also confirmed that while the delta load is initiated the transactions are being passed into the CE1XXXX table.
Thanks,
Amit Mitra

Hi PK,
caller 09 error mainly because of source(target system) and destination(bw system) not configured correctly.
i think you get the error message as follows. file is in the client workstation as like.
better you contact basis people. they will resolve this.
hope this help you
Regards
Harikrishna N

Error in source system while extracting the data from R/3!

Hi,
i had created FM and extract strcucture in R/3 .
using the above two, i had created data source using RSO2 T code.
when i checked the extractor ( RSA3 T code) in R/3 it was working fine .
(status messege displayed as 1000 records selected).
then i assigned this data source to infocurce and creted info cube using the same info source.
but when i schedule the info package it is syaing in the monitor screen "error in source system".
what could be the problem?
Thanks,
Ravi

Hi
trhese are the possiblies
1.first check the source system connection and find if there is any error in it.
2.Go to sm37 and find whether the request is completed or not if its terminated find out the time. how long does it takes to complete the process.
3.once again relicate the data source and find whether is it again extract data.

Regarding Error in Source System.

Similar Messages

Maybe you are looking for