REGARDING ERROR MESAGE TRIGGER WHILE MAKING P.R AGAINST WBS ELEMENT.

Dear FI/CO & PS Consultants,
in which node shell i have to configure for getting the error message while creating the PURCHASE REQUISITION when my budget is excedding.
Actually i craeted WBS ELEMENTS and budgeted. I created a PURCHASE REQUISITION and assigned the components , where the cost of all the components is higher than the budget assigned to WBS ELEMENT. But i am not getting the error message.
Kindly do need full.
Kindly send me the details to pardha at raincii.com
Regards,
Pardhu

Hi,
Please refer to the following informational notes that will explain the functionality:
Note: 178837 - Explains why BP604 appears/does not appear.
Note: 783161 - Logic Explanation when AVC is appears not working
Note: 873977 - Controlling elements in availability control
Note: 166394 - Tolerance Limits information
Note: 1160675 Availability check, commitment carr. fwd. and budget
152571 -missing or wrong commitments
459509 - commitments in purchasing
634298 - commitment update in services
772206
See also note 47992 for checking the commitment activation for projects.
In transaction CUNI, the unit of measurements used at item level
must be set to value based commitment.
Regards,
Edit

Similar Messages

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

How do I update my iPad to ios5 I am getting an error mesage -402653081 while backing up the iPad, if I proceed then I will loose all the content of the iPad?

The IOS5 upgrade will erase everything on your iPad, so make sure you have a good backup before you start.
If not, you will just have to reenter all of your settings all over again. Have you ever backed it up successfully?

Error when processing asset under construction (AuC) for WBS element message no cj824

Hi,
i am getting error message when i change dates in activities.
Error when processing asset under construction (AuC) for WBS element
Message no. CJ 824
i have checked related post but did not find any solution. also check SAP Note but not related to my issue.
Please guide.
thanks
Sunil

Hi Ken,
Please check below screens:
according to this error message AUC has some missing field or some incorrect value. but when i checked via program RAUNVA00 which will display
Incomplete Assets - Detail List.
but this program does not return any incompleteness.
i found many threads and SAP Not but none of is related to my program. this problem comes when i change dates in activity and save the project.
Please suggest what to do now.
thanks
Sunil

Error - Unhandled Exception While making AR invoice and AP invoice

Hello Expert,
while making AP Invoice from user's computer after entering 2/3 invoice , SAP raises an error "
and close SAP Business One but when user is connected through Terminal Server then there is no problem to add document.
while making AR Invoice from user's computer after entering 2/3 invoice , SAP raises an error "
and close SAP Business One but when user is connected through Terminal Server then there is no problem to add document.
Please assist me regarding these issues.

Dear Chintan,
SAP Business One 9.1 (9.10.140) PL: 04 (32-bit)
Regards,
Mizan

Error On trigger while adding a date

This is my trigger i want to add 15 dates to issue date,while running a trigger its showing error,
try to solve that trigger
create or replace
TRIGGER ISSUE_BOOK_TRI
BEFORE
INSERT ON issue_book FOR EACH ROW
DECLARE
CURSOR a IS
SELECT join_date FROM member_book;
p_join_date DATE;
BEGIN
OPEN a;
FETCH a INTO p_join_date;
IF p_join_date> :new.issue_date THEN
RAISE_APPLICATION_ERROR (-20322,'You may Issue book only after joining');
elsif
:new.return_date := :new.issue_date+15;
end if;
CLOSE a;
END;
Error(15,22): PLS-00103: Encountered the symbol "=" when expecting one of the following: . ( * @ % & = - + < / > at in is mod remainder not rem then <an exponent (**)> <> or != or ~= >= <= <> and or like like2 like4 likec between || indicator multiset member submultiset
Error(16,5): PLS-00103: Encountered the symbol "END" when expecting one of the following: begin function pragma procedure subtype type <an identifier> <a double-quoted delimited-identifier> current cursor delete exists prior

/* Formatted on 2012/04/25 14:22 (Formatter Plus v4.8.8) */
CREATE OR REPLACE TRIGGER issue_book_tri
BEFORE INSERT
ON issue_book
FOR EACH ROW
DECLARE
CURSOR a
IS
    SELECT join_date
      FROM member_book;
p_join_date   DATE;
BEGIN
OPEN a;
FETCH a
   INTO p_join_date;
IF p_join_date > :NEW.issue_date
THEN
    raise_application_error (-20322, 'You may Issue book only after joining');
ELSIF 1 = 1 -- uuuuuu miss the condition here
THEN
    :NEW.return_date := :NEW.issue_date + 15;
END IF;
CLOSE a;
END;

Error in trigger while importing schema

I am getting the below error while importing a schema back to a database..
ORA-39083: Object type TRIGGER failed to create with error:
ORA-04072: invalid trigger type
Failing sql is:
BEGIN DBMS_DDL.SET_TRIGGER_FIRING_PROPERTY('"pula"','"Trigger1"',FALSE) ; END;
ORA-39083: Object type TRIGGER failed to create with error:
I have checked the status of the trigger and everything id fine...
Please help..!!

Rajesh,
Please go through this Wiki chapter on CoA import using DTW and you should be able to understand this better
https://wiki.sdn.sap.com/wiki/display/B1/SAPBusinessOne...ToGo-10.DataTransfer+Workbench
Suda

Syntax error in F110 while making proposal,upgraded from 4.7ee to ECC6.0

Hi,
We have upgraded the SAP from 4.7ee to ECC6.0.We are facing post upgradation issues.
While executing proposal in Trx.code F110(APP),it is going to ABAP dump,throughing a syntax error FILL_PAYGR_FROM_BSEC.
Please guide me to solve this issue.
Regards,
Nageswar Rao J

I suggest to open an OSS call for that issue (component FI-AP-AP-B).
Markus

Error in process when creating Purchase Order against WBS

Hi!
We are creating a purchase order (BBP_POC) against a WBS. But when trying to purchase for more than what the project budget is set to the purchase order gets the status "Error in process". We do not want the purchase order to be replicated to ECC but dont want it to be created in SRM as well. Is there a way to get an error message when trying to create the Purchase order? We do not want to end up with alot of purchase orders with "errror in process".
When doing the exact same thins in sourcing cockpit it is not possible to create the purchase order. Then we receive the error message (or warning) stopping us from creating a PO in SRM.
How to get the error and warning in BBP_POC?
Sincerely
Anders Öhrling

The budget check should work in the following cases
    1. When you create and change a shopping cart (e.g. after it has been held)
    2. When you create and change a purchase order (purchasing cockpit)
    3. When you create a purchase order from within the sourcing cockpit (as of SRM 2.0)
    4. With the approval of shopping carts and purchase orders
Unfortunately nr 2 is not working.
BBP_BUDGET_CHECK is not implemented.
Sincerely
Anders Öhrling

Need backend error in SRM while entering Service item

hi SRM guru ,
I need backend error while entering Service item in SRM in PO .
I have scenario where in I need backend errors from ERP while making entry Service items .
I need some configuration or customization that will cause backend error againt Service items .
I have tried many thing like introducing such UOM , Tax code in SRM which is not supported by ERP .
I was expecting backend error for it but it does not happen like that .
I need find out some action that can cause Backend error for Sure while making entry of SRM Service item .
I kindly invite your ideas and inputs ...
In genral need something on PO UI that can cause backend error for Service item ...
i have this Scenario mainly in SRM 6.0 onwards systems...
Thanks in Advance .
Regards ,
Parag Bhise

Hi,
What specifically are you attempting to do?
Why any error when craeting service item.
You could code the DOC_CHECK_BADI to make an RFC call the the backend to do what ever check is necessary.
Regards,
Matthew

While making a payment am getting the error.

Hi All,
While making a payment am getting the error.
Error Details:
APP-SQLAP-10000:ORA-20001:APP-FND-00466
FND_CONCURRENT.GET_REQUEST_STATUS cannot find your concurrent request 943570.
This is my payment batch details:
BatchName PaymentDate Status
EMPLOYEE210809 21-08-09 Formatted
I went to following navigation
PayablesManager-->Payments-->PaymentBatches-->i query for the particular invoice batch(am getting corresponding invoice)-->Actions..1-->ConfirmPAymentBatch(i enabled the check box) click on the ok button.
Can you pls suggest me how i can do this one.
Thanks in advance.
Regards,
Leelakrishna.G

Pl see if MOS Doc 1054330.6 (APXPAWKB - GETTING FRM-40735; ORA-04068; ORA-04067; ORA-06508; ON PAYMENTS) can help
HTH
Srini

While making 103 mvt for PO error'Aceptance at vendor set for po Item'

Dear Sir,
While making 103 mvt for PO, we are getting error 'Acceptance at vendor set for PO item'
Rgs
Kumar

Hi
Check the PO delivery tab. Origin acceptance will be flagged. It means material is accepted at vendor's premises. You need to use movement type 107 which will take stock to valuated GR blocked stock.It means once you do 107 material is valuted in your books. Then 109 to bring to your stock. You should not do 103 and 105 if the origin acceptance is flaged in GR.
Regards
Antony

Error FRM-40735, ORA-04062 While Making Payments

Hi, while making payments it raised following errors:
FRM-40735:POST-FORMS-COMMIT trigger raised unhandeled exception ORA-04062these are steps in navigation:
invoice >> action 1...pay in full>>>payment method (bill payables)
does anyone know how to overcome this error ??
thx

Was this working before? If yes, any changes been done recently?
Do you have any invalid objects in the database?
Please see these docs.
Receipts Workbench Error: Listing of ORA Errors [ID 1364345.1]
Receipts Workbench Error: Listing of FRM Errors [ID 1361887.1]
Thanks,
Hussein

Pricing error while making Credit Memo

Dear Gurus,
While making credit memo with reference to credit Memo request i am getting pricing error on the basic price.
Please note i am getting this error only while making credit memo under this conditions
1. while using Invoice as reference while making credit memo request and than making credit memo with reference to credit memo request.
Please note i am not getting this error while the credit memo request is not refrenced to Invoice.
I am using the same document types for both the scenarios. I have checked copy control and the Pricing type maintained is "D".
Please let me know what could be the possible error.
Thanks for your help in advance.
Regards
Shrads

Hi,
Please check your credit memo document type for document pricing procedure in VOV8.

Error while making connection with remote oracle database

Dear,
I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
DriverManager.getConnection(
"jdbc:oracle:thin:@erp:1521:ORCL", "apps",
"apps");
Pls any body have idea.
Thanks.

Thanks for support.
Below is error which i am getting while making connection with remote database.
C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
-------- Oracle JDBC Connection Testing ------
Where is your Oracle JDBC Driver?
java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
        at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
        at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
        at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
        at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
        at java.lang.Class.forName0(Native Method)
        at java.lang.Class.forName(Class.java:186)
        at OracleJDBC.main(OracleJDBC.java:13)
Advice.

ORA-00607: Internal error occurred while making a change to a data block

hi
i hv use testing purpose oracle 10 Xe in unix
but when today i hv connect database following error occured
SQL> startup
ORACLE instance started.
Total System Global Area 83886080 bytes
Fixed Size 1257284 bytes
Variable Size 75497660 bytes
Database Buffers 4194304 bytes
Redo Buffers 2936832 bytes
Database mounted.
ORA-00607: Internal error occurred while making a change to a data block
ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
I hv check alert log , but no proper solution is given , how can start database

Duh, and of course I missed the significance of
oracle 10 Xe in unix
XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
Good luck, APC

REGARDING ERROR MESAGE TRIGGER WHILE MAKING P.R AGAINST WBS ELEMENT.

Similar Messages

Maybe you are looking for