Regarding ESS iviews

Hi all,
        I created externally all reuired JCO's for ESS business package (ESS BP 1.0 and EP 7.0). created JCO's
SAP_R3_HumanResources
SAP_R3_HumanResources_MetaData
SAP_R3_Financials
SAP_R3_Financials_MetaData
SAP_R3_SelfServiceGenerics
SAP_R3_SelfServiceGenerics_MetaData
SAP_R3_Travel
SAP_R3_Travel_MetaData
test is successfull for all created jco's,
but click on iviews under employee self service i am able to see balnk page. for all iviews i am seeing only blank pages.
What is the reason for getting blank pages?
How to resolve this problem?
thanks and regards,
phanikumar.

Hello Phani,
Check whether you have the necessary permission to run the ess application. Assign urself the super_admin_role and try. Or else change the permission of the <b>Content provided by SAP</b> folder under <b>Portal Content</b> and assign ur name and give end user permission.
Regards
Deb
[Reward Points for helpful answers]

Similar Messages

  • LDAP users Faicng Error While Accessing the ESS Iviews in Portal

    Hi,
    My Portal is SAP EP 7.0 SP20 And ECC 6.0 SP16.
    UME users able to access the ESS MSS Iviews.But only one LDAP User only access ESS/MSS Iviews Other getting the Below error.
    Critical Error
    A critical error has occured. Processing of the service had to be terminated. Unsaved data has been lost.     
    Please contact your system administrator     
    Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE     
    Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE:
    com.sap.tc.webdynpro.modelimpl.dynamicrfc.WDDynamicRFCExecuteException: Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
                    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:101)
                    at com.sap.xss.ser.xssmenu.fc.ModelHandler.onInit(ModelHandler.java:205)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalModelHandler.onInit(InternalModelHandler.java:428)
                    at com.sap.xss.ser.xssmenu.fc.FcXssMenu.setPersonnelNumber(FcXssMenu.java:570)
                    at com.sap.xss.ser.xssmenu.fc.FcXssMenu.onInit(FcXssMenu.java:292)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenu.onInit(InternalFcXssMenu.java:455)
                    at com.sap.xss.ser.xssmenu.fc.FcXssMenuInterface.onInit(FcXssMenuInterface.java:165)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface.onInit(InternalFcXssMenuInterface.java:389)
                    at com.sap.xss.ser.xssmenu.fc.wdp.InternalFcXssMenuInterface$External.onInit(InternalFcXssMenuInterface.java:546)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
                    at com.sap.pcuigp.xssutils.navi.FcNavigation.onInit(FcNavigation.java:314)
                    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigation.onInit(InternalFcNavigation.java:358)
                    at com.sap.pcuigp.xssutils.navi.FcNavigationInterface.onInit(FcNavigationInterface.java:145)
                    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface.onInit(InternalFcNavigationInterface.java:142)
                    at com.sap.pcuigp.xssutils.navi.wdp.InternalFcNavigationInterface$External.onInit(InternalFcNavigationInterface.java:278)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:922)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084)
                    at com.sap.pcuigp.xssutils.roadmap.VcRoadmap.onInit(VcRoadmap.java:188)
                    at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmap.onInit(InternalVcRoadmap.java:162)
                    at com.sap.pcuigp.xssutils.roadmap.VcRoadmapInterface.onInit(VcRoadmapInterface.java:153)
                    at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface.onInit(InternalVcRoadmapInterface.java:144)
                    at com.sap.pcuigp.xssutils.roadmap.wdp.InternalVcRoadmapInterface$External.onInit(InternalVcRoadmapInterface.java:220)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438)
                    at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196)
                    at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110)
                    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
                    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
                    at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73)
                    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869)
                    at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229)
                    at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344)
                    at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356)
                    at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549)
                    at com.sap.portal.pb.PageBuilder.wdDoInit(PageBuilder.java:193)
                    at com.sap.portal.pb.wdp.InternalPageBuilder.wdDoInit(InternalPageBuilder.java:150)
                    at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215)
                    at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
                    at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:782)
                    at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:302)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:741)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:694)
                    at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253)
                    at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
                    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
                    at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
                    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
                    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
                    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
                    at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
                    at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
                    at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
                    at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
                    at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
                    at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
                    at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
                    at java.security.AccessController.doPrivileged(Native Method)
                    at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
                    at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)
    Caused by: com.sap.aii.proxy.framework.core.BaseProxyException: Syntax error in program CL_XSS_CAT_BUFFER=============CP        ., error key: RFC_ERROR_SYSTEM_FAILURE
                    at com.sap.aii.proxy.framework.core.AbstractProxy.send$(AbstractProxy.java:150)
                    at com.sap.pcuigp.xssutils.xssmenu.model.MenuModel.hrxss_Ser_Getmenudata(MenuModel.java:171)
                    at com.sap.pcuigp.xssutils.xssmenu.model.Hrxss_Ser_Getmenudata_Input.doExecute(Hrxss_Ser_Getmenudata_Input.java:137)
                    at com.sap.tc.webdynpro.modelimpl.dynamicrfc.DynamicRFCModelClassExecutable.execute(DynamicRFCModelClassExecutable.java:92)
                    ... 76 more
    Thanks & Regrads,
    Subba Rao

    Hi,
    Now every user facing the same error while accessing ESS Iviews from Portal.
    in ST22 Dump is created.
    What happened?                                                                                |
    Error in the ABAP Application Program
    The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
    terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program
    "CL_XSS_CAT_BUFFER=============CP " in include
    "CL_XSS_CAT_BUFFER=============CM00C " in
    line 50:
    ""L_CATSDB" and "L_CATSDBCOMM" are not mutually convertible. In Unicode"
    " programs, "L_CATSDB" must have the same structure layout as "L_CATSDB"
    "COMM", independent of the length of a Unicode character."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    Error in the ABAP Application Program
    The current ABAP program "CL_XSS_CAT_TIME_SHEET=========CP" had to be
    terminated because it has
    |    come across a statement that unfortunately cannot be executed.
    What we need to resolve the above issue.
    Thanks & Regards,
    Subba Rao

  • Hiding fields in Review button in ESS iviews

    Hi All,
    In ESS iviews, say Communication Address under Personal Information, have hid some fields (ctrl+rt click) which were not needed it goes fine till i click Review button.
    After i click Review button to come under Review and Save roadmap, all the fields are again visible in disable mode.
    Can you please help me in resolving this issue.
    I need to hide some fields which are not needed permanently from the iview.
    Thanks and Regards
    Piyush

    Hi
    In content administration  go to that iview, preview it  and click CTR+Right click it open's personalization editor from there you can hide the tab's and can change the text in that iview. this works for only ESS iviews
    Regards
    Mahesh

  • Need Information Regarding  ESS/MSS?

    Hi All,
    I am Having Doubts Regarding ESS?
    In Ess it contains Different Tasks.
    ->Befenits & Payment
    ->Career job
    ->Employee Search
    ->Personal Information
    ->Travel management
    ->Corporate Inf
    ->Life & Work Events
    These Tasks Comes Under one WebdynproIvew or Different WebDynproIvews?
    In WebdynproIvews I Have to Write Webdynpro Code for Search,Edit and Submit.For this I Need Webdynpro Code.Plz send me the Code?
    Reply ASAP.
    Regards
    Kiran

    Hi Kiran,
    There is no need to develop iViews for ESS. ESS comes with all iViews, pages, and roles provided by SAP. All you need to do is assign the ESS role to the end user.
    Firstly answer these questions:-
    1) Why do you need to develop WebDynpro iViews for ESS?
    2) Have you already downloaded ESS Business Package and using it?
    3) Have you got the NWDI installed?
    4) Have you got NetWeaver Developer Studio installed?
    If you can manage to answer these questions clearly, I hope someone might be able to help you?
    Assign Points if you find this helpful!!!
    Kind Regards,
    Gopal.

  • Employees - Not able to view ESS iviews

    Hi All,
    We are configuring my SAP ERP 2004 ESS 60.2 and MSS 60.1 in EP 6.0. We are not able to view ESS iviews if we login as an end user(employee) but if we login as administrator, we are able to view all the ESS iviews.
    If i give super admin role to employee, then he is able to see the iviews.
    Could any one tell us wat is the problem.
    I have mapped user id in portals and R/3 also.
    Waiting for your valuable suggestions.
    Regards,
    Mahesh.M.R

    Hi Sharadha,
    I went to note <b>939412</b> ie
    Assign the following permissions to an End user.
    1.
    Goto Content Administrator ->Portal content ->Content Provided by SAP ->End User Content -> Employee Self Service
    Right click on  Employee Self Service. select open-> Permissions
    Assign read authorization to default user group "everyone".
    Check the 'EndUser' checkbox
    Save the Assigned permissions
    2.
    Goto System administration -> Permissions.
    Goto  Portal content ->Content Provided by SAP ->srvconfig
    Assign read authorization to default user group "everyone".
    Check the 'EndUser' checkbox
    Save the Assigned permissions.
    I did accordingly for the first step, Now i am not able to find srvconfig in content provided by SAP(system Admin).
    How to go abt now..
    Awaiting for you response.
    Thanks & Regards,
    Mahesh.M.R

  • Blank Page Showing for ESS iView in Portal

    Dear All,
    I have here ECC 6 and EP 7, i have uploaded Business Package for ESS named BP ERP05 ESS 1.0 Support Package 07.
    I have configured the Post Installation Steps and SLD.
    I have Created System and system aliases in System Landscape in portal and also granted permission to the respective user.
    I have also created user in ECC 6 and mapped the same with a Pernr.
    I have also maintained the JCO connection namely
    WD_RSDAS_MODELDATA_DEST (Already present)
    WD_RSDAS_RFC_METADATA_DEST(Already present)
    WD_MODELDATA_DEST(New JCO Connection Created)
    WD_RFC_METADATA_DEST(New JCO Connection Created)
    But when i view the ESS iView from the User then blank page is coming.
    Every iView of ESS is showing blank page and also not error is being shown.
    Kindly guide me if any setting is still pending from my end
    for these iView to show results.
    Regards,
    Sidhartha Chatterjee

    Hi Sidartha,
      Deploy the SAP_ESS SCA file (SAPESS01_0-20000512.sca) file to get the ESS applications.
    And also Deploy the SAPPCUI_GP SCA file (SAPPCUIGP01_0-20001215.sca) to get the xss framework on which ESS applications run.
    SCA file for BP just has the iviews in which the ESS applicaitons run.
    SO you have to deploy the above said .SCA files to get the applicaitons.
    Hope it is clear for you now!
    Regards,
    Sharadha

  • 'Access is denied' error in ESS iViews & Page not displayed' thru. internet

    Hi,
      We are implementing <b>ESS(Webdynpro)/MSS(Java)</b>.
      We are in EP6 SP13.
      We want to put our portal on internet through SSL.
    I have installed SAP Webdispatcher and configured it to support SSL. SAP webdispatcher is installed on a DMZ machine(hostname: SAPROUTER).
    <i>webdispatcher ports:</i>
    http port: 80
    https port: 8443
    1) When i try to access the portal from the DMZ machine (where the webdispatcher is installed) using <b>https://saprouter.domainname.net:8443/irj/portal</b>, i am able to see all the iViews.. but, i am getting '<b>access is denied</b>' error(in the status bar) when i try to click on any link in ESS iViews (for ex: working time, Employee search).. when i try to double click i am getting javascript:void(0)
    2) When i try to access the portal through internet(<b>https://<ipaddress>:8443/irj/portal</b>), I get the logon page and after logging in... i am not able to see the ESS and Transaction iViews .. getting 'Page cannot be displayed' error.
    When i am able to see the iViews in the DMZ machine.. why are they not being displayed when i access through internet??
    Can any1 help me in this regard?? What am i missing ??
    Awaiting your reply.
    Regards,
    SK.

    It’s a hot topic I think,
    Where facing the exact same problems.
    When we logon ‘LOCAL’ to the Portal the iview works. (Not true the internet / DMZ)
    But when we logon true the webdispatcher we get the Portal Layout, so the dispatcher works.
    But the WEBdynpro Iview gives the error -> ‘Page not displayed'
    And when we edit the file “hosts” on the pc of the client browser and fill in the hostname of the SAP Portal the Iview works…..???
    There are no ports closed on the firewall, everything is allowed.
    Can anyone tell me of it’s necessary to edit the Web Dynpro Runtime Environment. Here are some settings for the WEBdispatcher but I can’t get it working.
    -     sap.webdispatcher.host           = Defines the host of a used Web Dispatcher
    -     sap.webdispatcher.port            = Defines the port of a used Web Dispatcher
    -     sap.webdispatcher.protocol      = Defines the protocol of a used Web Dispatcher
    See the link -> http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/frameset.htm
    When I activate the trace on the webdispatcher
    (D:webdispsapwebdisp.exe pf=D:webdispsapwebdisp.pfl -t 2)
    In the Tracefile I can see that the webdispatcher resolves the SAP portal system. That’s was aleady confirmed by seeing the portal framework from the client. I think that the WEBdynpro’s have to be remote activated, or some addition settings in the webdispatcher.
    If somebody get an idée I really would like to know it.
    Best regards,
    Edwin

  • Problem by accessing ESS iViews

    Hi all,
    I have the following problem:
    If I want to open an ESS iView I get the following error message:
    An error occured while starting the iView...
    https://portalname/webdynpro/dispatcher/sap.com/pcui_gp~xssu.......
    will run with a wrong client ID!
    Does anyone has an idea about this error message?
    Thanks a lot!
    Regards
    Andreas

    Hi
    can you please let me know .How you resolved this issue iam also getting same error for one user...................
    An error occured while starting the iview
    application running with a wrong client id ...this i sthe error iam getting
    thanks
    kirankumar M
    Edited by: kiran kumar on Sep 17, 2008 7:01 AM

  • ITS 620 Patch 19 - ESS iviews (PZ13 etc) show initial WebGui screen

    Hi,
    We have EP6 SP12 with the ESS Business Package. All the ESS iviews were working until I upgraded the ITS 6.20 to patch 19 (I think this is when the problems began). Now, any ESS iview that does not have an IAC service in the R/3 system (for example PZ13 - Personal Data, PZ02 - Addresses), the iview shows the WebGui start screen (the one with the "Start SAP Easy Access" button) rather than the IAC screen.
    If I access the IAC through ITS directly (i.e. using the http://itsserver:port/scripts/wgate/pz13/! URL) I can access the transaction, but the IAC iviews do not work.
    Any help greatly appreciated!
    Regards,
    Jane

    Jane,
    Did you restart the ITS Instance? The setting i mentioned is correct, it worked for us. Here is the SAP note number, Sorry i don't have the note number,just saved the text. 
    Symptom
    After installing ITS 6.20 patch level 19, some enterprise portal iviews of type WebGui are connected successfully to the backend system, but show SAP easy access menu, instead of an appropriate start transaction screen.
    Reason and Prerequisites
    A defined ITS start transaction (~transaction) is not processed when using SSO ticket to logon to a backend system.
    Other logon methods like User/Password, do not show this behavior.
    Solution
    Problem is fixed with ITS 6.20 patch level 20.
    To curcumvent the problem in ITS 6.20 patch level 19, please set
      ~popupsduringlogon 0
    in the ITS global servcie file and restart the system

  • Standard ESS iViews for ECM module

    Hi,
    Regarding the compensation management module, there are several standard ESS iViews delivered by SAP:
    For instance the "<i>Displaying a Total Compensation Statement</i>" in Business Package for Employee Self-Service (mySAP ERP 2004).
    As we are setting up Enterprise Compensation Management, I would like to know whether these iViews will also be delivered for ECM. I have checked all Business Package documentation but did not find any standard ESS iViews for ECM.
    For MSS, I have found the MSS_60_1_EN.pdf documentation which contains a lot of MSS ECM information. No ESS info unfortunately.
    Thanks in advance.
    MvdM

    The TCS iView is only part of ESS BP and basically uses the ess/rem DC to generate the report framework that shows the output as Adobe PDF. The TCS itself is implemented in the backend with the form builder (/hrforms) - same approach as salary statement. Employees can view their salary statemetn or TCS. In ECM you have managers working with employee data and normally you don't want to display managers this type of information of their employees - but that depends off cause on your requirements. It is not too difficult to build a custom TCS service for managers and integrate it with ECM.

  • Editing ess iviews

    Experts,
    I recently learned about admin edits for peronalising IVIEWS in ep 7.0 . can any one. please provide some help ful links

    Hi ,
    Post the question clearly!
    If I am not wrong , you want to edit / cutomize ess iviews.
    you can do it using homepage framework method.
    NWDI is the best solution for customizing ESS.
    Home Page Framework
    ESS : Webdypro iView Customizing
    NWDI
    Clarifications regarding customization of ESS iViews
    ESS Customization
    How to do the modification in standard ESS/MSS business packges using NWDI?
    Koti Reddy

  • Customizing ESS  iViews

    Can any one send me documents that would help in the customization of ESS iViews.II have gone through some of the documents provided in the forums but was unable to follow as I am pretty much new. Would appreciate if anyone could send me a detailed document.
    Regards,
    Mithila
    [email protected]

    Hi,
    Can any one please send the ESS customization documents to
    [email protected]
    Regards,
    Abhi

  • Error while trying to use ESS iViews

    Hi All Experts,
      We are upgrading our portal to EP 7.0
    I am working with ESS iViews and when I try to open any ESS iView say, Benefits and Payment, I get the following error.
    Service cannot be reached
    What has happened?
    URL https://srams.dev-sap.grainger.com:44306/webdynpro/dispatcher/sap.com/pcui_gp~xssutils/XssMenuArea call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system SRA with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-https-c:000-u:SAPSYS-l:E-i:devsun10_SRA_06-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    Please help.
    Thanks
    Preet

    Hi,
    Do you still have you problem ?
    Regards

  • Exit button on ESS iViews

    Hi,
    We have ESS deployed on EP7.0, so we are using the WebDynpro version of ESS. Now we want to redirect the navigation to our own customized iView when click "Exit" button on any of the ESS iView, for example , address iView. I guess this should be controlled in the pcui_gp xssutil component, am I right? Can anyone give me some hints on where I can make this modification? Thanks a lot

    Hi Chris,
      thanks for your reply.
      If you mean to hide the button using the iView/WD Personalisation by rightclick on the iView in PCD and then Review, well yes i know this and i have tried this already before and we were able to hide some not required input fields in the Webdynpro, but we were not able to find and to hide the "EXIT" Button using the personalisation..!!?? you know why?
    Why to hide the Exit button, i will tell you why, in the iView for maintainig the ESS Personal Information -> e.g. Adresse --> Edit Adresse View (Roadmap view No. 2) --> when User click on the Exit Button --> This will open new browser Window with ESS... ---> This second Browser Window (Pop up) would confuse the User, since he already have an opened window, so the Customer mean why open new window, since the user can simply click the Button Back and so his data are also saved..
    How can we manage to control the behaviour of the Button, so the iView is closed safety without that new Pop-up windows are opened...
    Many Thanks,
    Nazih

  • ESS iView Errors?

    I got this error for every ESS iView:
    The initial exception that caused the request to fail, was:
       java.lang.NullPointerException
        at com.sap.pcuigp.tracking.BTrackingComp.isValuePackSystem(BTrackingComp.java:290)
        at com.sap.pcuigp.tracking.BTrackingComp.onInit(BTrackingComp.java:206)
        at com.sap.pcuigp.tracking.wdp.InternalBTrackingComp.onInit(InternalBTrackingComp.java:173)
        at com.sap.pcuigp.tracking.BTrackingCompInterface.onInit(BTrackingCompInterface.java:115)
        at com.sap.pcuigp.tracking.wdp.InternalBTrackingCompInterface.onInit(InternalBTrackingCompInterface.java:124)
        ... 71 more
    Another strange information:
    Web Dynpro Runtime Vendor: null, build ID: null, build date: Sun May 17 10:37:28 PDT 2009
    How do I solve this problem? Thanks!

    Hi,
    For which ESS Service you are facing the error.Ensure you have required authorizations.
    Or Give it a try by checking the application with SAP_ALL authorizations

Maybe you are looking for

  • Page numbers are repeating in Page Thumbnail view.

    Using Adobe Actobate XI Standard with Windows.  When I in insert another adobe document into my current document (by either using the tool Insert from File or dragging it from another screen), my page numbers in the thumbnails get the same page numbe

  • How do I lock a pdf except the signature field?

    I'm using Acrobat X Pro. I want to send a form for others to sign, but I don't what the signer do anything to alter the contents of the form except signing. Can I do that? If I can, how? Thanks!

  • Dynamic versioning of Sun JVM

    Hi, I have already read the Oracle about Sun JVM dynamic versioning for Oracle Forms but am still confused. I'm migrating Forms 9.0.2 to 10.1.2.0.2 and would like to use Dynamic versioning of Sun JVM with Sun JVM 1.4.2_06 as a minimum version. What s

  • Groups having non-overlapping intervals

    Hi there, I need help on some mind boggling overlap problem, or perhaps non-overlap problem. Having the sample data below, I need to put together subcodes in groups having non-overlapping intervals [MIN_VAL;MAX_VAL[ I have this table: SQL>create tabl

  • Can't hide offline users.

    Running a stand along Lync 2013 Standard server for IM and Presence, when the "Show contacts with away, offline and unknown presences in a separate group" is enabled, nothing happens. The offline and away users are still in their groups, with nothing