Regarding Excel Sheet

Thanks for the immediate response for my queries. The answers are very useful. 
As per our requirement, I need to display excel sheet with values on the front panel itself so that customer can view the values there itself.
How can i do this in LabView?
Thanks in Advance
Regards
Malleswari

Are you trying to save the data in excel and display that excel sheet?
If yes, you can do that using Report generation toolkit.

Similar Messages

  • Regarding excel sheet as an attachment to mail

    hi
    am using the  follwing code, it works finely upto sending excel as attachment. But the problem came in data of excel sheet.     
    the data in excel sheet is appearing like this one.
    Butxt data is occupying all columns 
    BUKRS BUTXT
    01      New York Insurance Company
    The code am developed is....
    parameters: p_email   type somlreci1-receiver
                                   default '[email protected]'.
    types: begin of sol,
           text(35),
           end of sol.
    data: begin of it001 occurs 0,
          bukrs type t001-bukrs,
          butxt type t001-butxt,
          end of it001.
    data:   imessage type standard table of solisti1 with header line,
            iattach type standard table of sol with header line,
            ipacking_list like sopcklsti1 occurs 0 with header line,
            ireceivers like somlreci1 occurs 0 with header line,
            iattachment like solisti1 occurs 0 with header line.
    start-of-selection.
      select bukrs butxt into table it001 from t001.
      Populate table with details to be entered into .xls file
      perform build_xls_data .
    Populate message body text
      clear imessage.
      refresh imessage.
      imessage = 'Please find attached excel file'.
      append imessage.
    Send file by email as .xls spreadsheet
      perform send_email_with_xls tables imessage
                                          iattach
                                    using p_email
                                          'Example Excel Attachment'
                                          'XLS'
                                          'TestFileName'
                                          'CompanyCodes'.
        if sy-subrc = 0.
         message i000(zsai).
        endif.
         Form  BUILD_XLS_DATA
    form build_xls_data .
    constants: con_cret(2) type C value '0D',  "OK for non Unicode
                con_tab(2) type C value '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes then you will
    *need to declare constants as follows
    class cl_abap_char_utilities definition load.
    constants:
        con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
        con_cret type c value cl_abap_char_utilities=>CR_LF.
      concatenate 'BUKRS' 'BUTXT'
             into iattach separated by con_tab.
      concatenate con_cret iattach into iattach.
      append  iattach.
      loop at it001.
        concatenate it001-bukrs it001-butxt
               into iattach separated by con_tab.
        concatenate con_cret iattach into iattach.
       iattach = iattach(30).
        append  iattach.
      endloop.
    endform.
         Form  SEND_EMAIL_WITH_XLS
    Send file by email as .xls spreadsheet
    perform send_email_with_xls tables imessage
                                         iattach
                                   using p_email
                                         'Example Excel Attachment'
                                         'XLS'
                                         'TestFileName'
                                         'CompanyCodes'.
    form send_email_with_xls tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription.
      data: xdocdata like sodocchgi1,
            xcnt type i.
    Fill the document data.
      xdocdata-doc_size = 1.
    Populate the subject/generic message attributes
      xdocdata-obj_langu = sy-langu.
      xdocdata-obj_name  = 'SAPRPT'.
      xdocdata-obj_descr = p_mtitle .
    Fill the document data and get size of attachment
      clear xdocdata.
      read table iattach index xcnt.
      xdocdata-doc_size =
         ( xcnt - 1 ) * 255 + strlen( iattach ).
      xdocdata-obj_langu  = sy-langu.
      xdocdata-obj_name   = 'SAPRPT'.
      xdocdata-obj_descr  = p_mtitle.
      clear iattachment.
      refresh iattachment.
      iattachment[] = pit_attach[].
    Describe the body of the message
      clear ipacking_list.
      refresh ipacking_list.
      ipacking_list-transf_bin = space.
      ipacking_list-head_start = 1.
      ipacking_list-head_num = 0.
      ipacking_list-body_start = 1.
      describe table imessage lines ipacking_list-body_num.
      ipacking_list-doc_type = 'RAW'.
      append ipacking_list.
    Create attachment notification
      ipacking_list-transf_bin = 'X'.
      ipacking_list-head_start = 1.
      ipacking_list-head_num   = 1.
      ipacking_list-body_start = 1.
      describe table iattachment lines ipacking_list-body_num.
      ipacking_list-doc_type   =  p_format.
      ipacking_list-obj_descr  =  p_attdescription.
      ipacking_list-obj_name   =  p_filename.
      ipacking_list-doc_size   =  ipacking_list-body_num * 255.
      append ipacking_list.
    Add the recipients email address
      clear ireceivers.  refresh ireceivers.
      ireceivers-receiver = p_email.
      ireceivers-rec_type = 'U'.
      ireceivers-com_type = 'INT'.
      ireceivers-notif_del = 'X'.
      ireceivers-notif_ndel = 'X'.
      append ireceivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = xdocdata
                put_in_outbox              = 'X'
                commit_work                = 'X'
           tables
                packing_list               = ipacking_list
                contents_bin               = iattachment
                contents_txt               = imessage
                receivers                  = ireceivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
       IF SY-SUBRC = 0.
       SUBMIT rsconn01 WITH mode EQ 'INT' AND RETURN.
        COMMIT WORK .
      ENDIF.
    endform.

    hi
    am using the  follwing code, it works finely upto sending excel as attachment. But the problem came in data of excel sheet.     
    the data in excel sheet is appearing like this one.
    Butxt data is occupying all columns 
    BUKRS BUTXT
    01      New York Insurance Company
    The code am developed is....
    parameters: p_email   type somlreci1-receiver
                                   default '[email protected]'.
    types: begin of sol,
           text(35),
           end of sol.
    data: begin of it001 occurs 0,
          bukrs type t001-bukrs,
          butxt type t001-butxt,
          end of it001.
    data:   imessage type standard table of solisti1 with header line,
            iattach type standard table of sol with header line,
            ipacking_list like sopcklsti1 occurs 0 with header line,
            ireceivers like somlreci1 occurs 0 with header line,
            iattachment like solisti1 occurs 0 with header line.
    start-of-selection.
      select bukrs butxt into table it001 from t001.
      Populate table with details to be entered into .xls file
      perform build_xls_data .
    Populate message body text
      clear imessage.
      refresh imessage.
      imessage = 'Please find attached excel file'.
      append imessage.
    Send file by email as .xls spreadsheet
      perform send_email_with_xls tables imessage
                                          iattach
                                    using p_email
                                          'Example Excel Attachment'
                                          'XLS'
                                          'TestFileName'
                                          'CompanyCodes'.
        if sy-subrc = 0.
         message i000(zsai).
        endif.
         Form  BUILD_XLS_DATA
    form build_xls_data .
    constants: con_cret(2) type C value '0D',  "OK for non Unicode
                con_tab(2) type C value '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes then you will
    *need to declare constants as follows
    class cl_abap_char_utilities definition load.
    constants:
        con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
        con_cret type c value cl_abap_char_utilities=>CR_LF.
      concatenate 'BUKRS' 'BUTXT'
             into iattach separated by con_tab.
      concatenate con_cret iattach into iattach.
      append  iattach.
      loop at it001.
        concatenate it001-bukrs it001-butxt
               into iattach separated by con_tab.
        concatenate con_cret iattach into iattach.
       iattach = iattach(30).
        append  iattach.
      endloop.
    endform.
         Form  SEND_EMAIL_WITH_XLS
    Send file by email as .xls spreadsheet
    perform send_email_with_xls tables imessage
                                         iattach
                                   using p_email
                                         'Example Excel Attachment'
                                         'XLS'
                                         'TestFileName'
                                         'CompanyCodes'.
    form send_email_with_xls tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription.
      data: xdocdata like sodocchgi1,
            xcnt type i.
    Fill the document data.
      xdocdata-doc_size = 1.
    Populate the subject/generic message attributes
      xdocdata-obj_langu = sy-langu.
      xdocdata-obj_name  = 'SAPRPT'.
      xdocdata-obj_descr = p_mtitle .
    Fill the document data and get size of attachment
      clear xdocdata.
      read table iattach index xcnt.
      xdocdata-doc_size =
         ( xcnt - 1 ) * 255 + strlen( iattach ).
      xdocdata-obj_langu  = sy-langu.
      xdocdata-obj_name   = 'SAPRPT'.
      xdocdata-obj_descr  = p_mtitle.
      clear iattachment.
      refresh iattachment.
      iattachment[] = pit_attach[].
    Describe the body of the message
      clear ipacking_list.
      refresh ipacking_list.
      ipacking_list-transf_bin = space.
      ipacking_list-head_start = 1.
      ipacking_list-head_num = 0.
      ipacking_list-body_start = 1.
      describe table imessage lines ipacking_list-body_num.
      ipacking_list-doc_type = 'RAW'.
      append ipacking_list.
    Create attachment notification
      ipacking_list-transf_bin = 'X'.
      ipacking_list-head_start = 1.
      ipacking_list-head_num   = 1.
      ipacking_list-body_start = 1.
      describe table iattachment lines ipacking_list-body_num.
      ipacking_list-doc_type   =  p_format.
      ipacking_list-obj_descr  =  p_attdescription.
      ipacking_list-obj_name   =  p_filename.
      ipacking_list-doc_size   =  ipacking_list-body_num * 255.
      append ipacking_list.
    Add the recipients email address
      clear ireceivers.  refresh ireceivers.
      ireceivers-receiver = p_email.
      ireceivers-rec_type = 'U'.
      ireceivers-com_type = 'INT'.
      ireceivers-notif_del = 'X'.
      ireceivers-notif_ndel = 'X'.
      append ireceivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = xdocdata
                put_in_outbox              = 'X'
                commit_work                = 'X'
           tables
                packing_list               = ipacking_list
                contents_bin               = iattachment
                contents_txt               = imessage
                receivers                  = ireceivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
       IF SY-SUBRC = 0.
       SUBMIT rsconn01 WITH mode EQ 'INT' AND RETURN.
        COMMIT WORK .
      ENDIF.
    endform.

  • Regarding creation of data type from an excel sheet

    hi experts,
      I am to create a data type which has 2000 fields. details about data type is in excel sheet.
    Is there any way i can convert this excel sheet to xsd and impot it in XI
    or there is any other way to do it fast.
    Or i will have create it manually one by one element.
    thanks
    Jaideep

    Hi,
    By default the occurences in the DTD will be Only One Occurrence.
    In the DTD you have to delclare the occurences as below and then convert to XSD using XML spy.
    Declaring Only One Occurrence of an Element
    Declaring Only One Occurrence of an Element
    <!ELEMENT element-name (child-name)>Example:<!ELEMENT note (message)>
    The example above declares that the child element "message" must occur once, and only once inside the "note" element.
    Declaring Minimum One Occurrence of an Element (put + sign after the message)
    <!ELEMENT element-name (child-name+)>Example:<!ELEMENT note (message+)>
    The + sign in the example above declares that the child element "message" must occur one or more times inside the "note" element.
    Declaring Zero or More Occurrences of an Element  (put * sign after the message)
    <!ELEMENT element-name (child-name)>Example:<!ELEMENT note (message)>
    The * sign in the example above declares that the child element "message" can occur zero or more times inside the "note" element.
    Declaring Zero or One Occurrences of an Element (put ? sign after the message)
    <!ELEMENT element-name (child-name?)>Example:<!ELEMENT note (message?)>
    The ? sign in the example above declares that the child element "message" can occur zero or one time inside the "note" element.
    http://www.w3schools.com/DTD/dtd_elements.asp
    Regards,
    Krishnaraju
    Edited by: v r krishnaraju mudunuri on Feb 20, 2009 1:24 AM
    Edited by: v r krishnaraju mudunuri on Feb 20, 2009 1:25 AM

  • Regarding downloading from alv report o/p to excel sheet

    Hi gurus,
                       When i am trying to download the alv output to excel sheet it is downloading only titles, No data is getting displayed in it.No data is getting downloaded.
    Thnaks in advance.

    Hi,
    What are the steps you do to download ALV to excel? We need to replicate the case in order to find answer.
    Regards,
    Teddy Kurniawan

  • Regarding ALV O/P download to Excel Sheet

    hi all,
         How can i download ALV o/p to Excel Sheet .
    Can anybody send the code .
    Regards
    Reddy

    Hi,
      Check the links below will help you,
    https://forums.sdn.sap.com/click.jspa?searchID=15756727&messageID=5942546
    https://forums.sdn.sap.com/click.jspa?searchID=15756727&messageID=5811905
    https://forums.sdn.sap.com/click.jspa?searchID=15756727&messageID=5986453
    https://forums.sdn.sap.com/click.jspa?searchID=15756727&messageID=5721594
    https://forums.sdn.sap.com/click.jspa?searchID=15756727&messageID=5839882
    https://forums.sdn.sap.com/click.jspa?searchID=15756727&messageID=5532797
    Have a nice day,
    Rama.

  • Regarding Downloading of Report[List] output into Excel Sheet

    Hi All,
    Hi i have written one Classical report. I got the output Correctly.
    Now i want to download that data into Excel Sheet in excatly the way it displayed in List[Report] output.
    I had followed the path <b>System->List->Save->LocalFile->Spread Sheet</b> and tried to download the same.
    Though it is downloaded it has not come in exact format.
    Now what i want is to add a button above that report & write a program in that to download that data into Excel Sheet.
    Can anybody tell me how can solve this issue. If i follow above procedure will the data[List Output] be downloaded into exact format into excel.
    If anybody knows other way please sujjest.
    Thanks in advance.
    Thanks & Regards,
    Prasad.

    Hi Prasad,
    I have done a program which downloads the output in the excel sheet in the correct format.
    Just check the program. The code given in bold is what you have to use.
    REPORT zexp MESSAGE-ID f4  LINE-SIZE 195.
        Tables Used    ***********************************
    TABLES : bseg, bkpf, bsak, lfa1, payr .
    Declaring Internal Tables  **************************
    DATA :
    Internal table to hold header data  *************
    BEGIN OF header OCCURS 0,
          ext_date(10) TYPE c,
          delimit(1)   TYPE c,
          ext_time(8)  TYPE c,
    END OF header,
    Internal table to hold detail info  **************
    BEGIN OF i_data OCCURS 0,
        belnr LIKE bsak-belnr,
        gjahr LIKE bsak-gjahr,
        bukrs LIKE bsak-bukrs,
        bldat LIKE bsak-bldat,
        xblnr LIKE bsak-xblnr,
        blart LIKE bsak-blart,
        augdt LIKE bsak-augdt,
        augbl LIKE bsak-augbl,
        wrbtr LIKE bsak-wrbtr,
        shkzg LIKE bsak-shkzg,
        lifnr LIKE bsak-lifnr,
        name1 LIKE lfa1-name1,
        chect LIKE payr-chect,
        status(1) TYPE c,
    END OF i_data,
    Internal table to to collect  *****************
    BEGIN OF i_data1 OCCURS 0,
         belnr LIKE bsak-belnr,
         gjahr LIKE bsak-gjahr,
         bukrs LIKE bsak-bukrs,
         bldat LIKE bsak-bldat,
         xblnr LIKE bsak-xblnr,
         blart LIKE bsak-blart,
         augdt LIKE bsak-augdt,
         augbl LIKE bsak-augbl,
         wrbtr LIKE bsak-wrbtr,
       shkzg LIKE bsak-shkzg,
         lifnr LIKE bsak-lifnr,
         name1 LIKE lfa1-name1,
         sortl LIKE lfa1-sortl,
         chect LIKE payr-chect,
         status(1) TYPE c,
    END OF i_data1,
    String variables for formatting file data *************
        fidoc_year   TYPE string,
        comp_code    TYPE string,
        check_numbr  TYPE string,
        vendor       TYPE string,
        inv_date     TYPE string,
        inv_nbr      TYPE string,
        paid_dat     TYPE string,
        inv_amt      TYPE string,
        status       TYPE string,
        ref_doc      TYPE string,
    ************Internal table to store the file contents **************
    BEGIN OF i_final_file OCCURS 0,
        record(300) TYPE c,
    END OF i_final_file,
    Internal table to store the list of allowed document types ****
      BEGIN OF i_doctype OCCURS 0,
             blart LIKE bsak-blart,
      END OF i_doctype,
    Internal table to hold vendor information ************
      BEGIN OF i_lfa1 OCCURS 0,
         lifnr LIKE lfa1-lifnr,
         name1 LIKE lfa1-name1,
         sortl LIKE lfa1-sortl,
      END OF i_lfa1,
    Internal table to hold check information *************
      BEGIN OF i_payr OCCURS 0,
         chect LIKE payr-chect,
         vblnr LIKE payr-vblnr,
         gjahr LIKE payr-gjahr,
         zbukr LIKE payr-zbukr,
      END OF i_payr.
      Data declarations  **************************
    DATA : ws_stblg     TYPE bkpf-stblg,
           todate       TYPE bsak-augdt,
           fromdate     TYPE bsak-augdt,
           w_day        LIKE dtresr-weekday,
           day          LIKE scal-indicator,
           d            TYPE n,
           e_date       LIKE sy-datum,
           e_time       LIKE sy-uzeit,
           dd(2)        TYPE c,
           mm(2)        TYPE c,
           yy(4)        TYPE c,
           hh(2)        TYPE c,
           min(2)       TYPE c,
           sec(2)       TYPE c.
    DATA : wa_filepath(50)    TYPE c,
           wa_filename(50)    TYPE c,
           wa_c_filename(100) TYPE c,
           arch_path(50)      TYPE c.
    <b>* Data for downloading to list
    DATA : list LIKE TABLE OF abaplist WITH HEADER LINE.
    DATA : BEGIN OF list_asc OCCURS 0,
    msg(300) TYPE c,
    END OF list_asc.
    DATA: BEGIN OF i_invoiceheader OCCURS 0,
    name(30) TYPE c,
    END OF i_invoiceheader.
    RANGES dates FOR bkpf-budat.</b>
      Selection Screen  ************************
    SELECTION-SCREEN SKIP 2.
    SELECT-OPTIONS:
             s_bukrs     FOR  bkpf-bukrs ,
             s_blart     FOR  bkpf-blart ,
             s_augdt     FOR  bsak-augdt. " memory id todat TO fromdat.
    PARAMETERS :submit  AS CHECKBOX DEFAULT ' '  .
    <b>* Download list to file.
    AT USER-COMMAND.
      CASE sy-ucomm.
        WHEN 'LIST'.
          PERFORM download.
        WHEN 'BACK'.
          EXIT.
      ENDCASE.</b>
    <b>----
          FORM download                                                 *
    FORM download.
    if s_augdt is initial.
    dates-sign = 'I'.
    dates-option = 'BT'.
    dates-low = '20050901'.
    dates-high = '20050920'.
    APPEND dates.
    else.
      dates = s_augdt.
      append dates.
    endif.
    /* Submit the same program .
      SUBMIT zexp WITH s_augdt IN dates
       EXPORTING LIST TO MEMORY
       AND RETURN.
      CALL FUNCTION 'LIST_FROM_MEMORY'
           TABLES
                listobject = list
           EXCEPTIONS
                not_found  = 1.
      CALL FUNCTION 'LIST_TO_ASCI'
    EXPORTING
    LIST_INDEX = -1 "LIST_INDEX SY-LSIND.
      TABLES
      listasci = list_asc
      listobject = list.
      PERFORM download_file.
    ENDFORM.
          FORM download_file                                            *
    FORM download_file.
      DATA fname TYPE rlgrap-filename VALUE 'c:\audit_report.xls'.
      DATA ftype TYPE rlgrap-filetype VALUE 'DAT'.
      DATA numeric_data(10) TYPE c VALUE '0123456789'.
    *Table structure should match with list output.
      DATA : BEGIN OF i_data1 OCCURS 0,
           belnr(12) TYPE c,
           gjahr(6) TYPE c,
           bukrs(8) TYPE c,
           chect(13) TYPE c,
           lifnr(12) TYPE c,
           name1(37) TYPE c,
           bldat(14) TYPE c,
           xblnr(18) TYPE c,
           augdt(14) TYPE c,
           wrbtr(17) TYPE c,
           status(4) TYPE c,
           augbl(18) TYPE c,
           sortl(17) TYPE c,
       END OF i_data1.
    Header record of the excel sheet.
      PERFORM fill_header.
      LOOP AT list_asc.
    Reads lines starting from the first record in the report. All informatory statements in the report are not read.
        IF list_asc+1(10) CO numeric_data.
          i_data1 = list_asc .
          APPEND i_data1.
        ENDIF.
      ENDLOOP.
    Call the download function.
    CALL FUNCTION 'DOWNLOAD'
           EXPORTING
                filename = fname
                filetype = ftype
           TABLES
                data_tab = i_data1
                FIELDNAMES = i_invoiceheader.
    ENDFORM.
          FORM fill_header                                              *
    FORM fill_header.
      i_invoiceheader-name = 'Doc Number'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Fsc Year'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Cmp Code'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Check No'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Vendor No'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Entered by'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Doc Date'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Ref Doc No'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Clearing Date'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Amount'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Status'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Clearing Doc No'.
      APPEND i_invoiceheader.
      i_invoiceheader-name = 'Sort field'.
      APPEND i_invoiceheader.
    ENDFORM.                    " fill_header</b>
       Initialization   *************************
    INITIALIZATION.
    To initialize the date parameter on the selection screen.
    The date by default ranges from previous Monday to Sunday.
      todate = sy-datum.
      CALL FUNCTION 'DATE_COMPUTE_DAY'
           EXPORTING
                date = todate
           IMPORTING
                day  = day.
      d = day.
      if d < 4.
        todate = sy-datum - d - 4 .
      else.
        todate = sy-datum - d + 3 .
      endif.
      fromdate = todate - 6.
      MOVE: 'BT'       TO s_augdt-option,
            fromdate   TO s_augdt-low,
            todate     TO s_augdt-high.
      APPEND s_augdt.
    Start of Selection  **************************
    START-OF-SELECTION.
    Checking the validity of the inputted dates ****************
      IF s_augdt-low > sy-datum OR s_augdt-high > sy-datum.
        MESSAGE i999 WITH 'You cannot input future date'.
        EXIT.
      ENDIF.
      IF NOT s_bukrs IS INITIAL.
    MESSAGE i999 WITH 'Program will run with input parameters in screen!!'.
      ENDIF.
    Initialize the header data ***********************
      e_time = sy-uzeit.
      MOVE e_time+0(2) TO hh.
      MOVE e_time+2(2) TO min.
      MOVE e_time+4(2) TO sec.
      CONCATENATE hh min sec INTO header-ext_time SEPARATED BY ':'.
      e_date = sy-datum.
      MOVE e_date+0(4) TO yy.
      MOVE e_date+4(2) TO mm.
      MOVE e_date+6(2) TO dd.
      CONCATENATE mm dd yy INTO header-ext_date SEPARATED BY '/'.
      header-delimit = '~'.
      APPEND header.
    List allowed document types **********************
      PERFORM fill_doc_types.
    **To select the documents within the range of week or as inputted **
      IF s_augdt IS INITIAL.
        MOVE: 'I' TO s_augdt-sign,
              'BT'       TO s_augdt-option,
              fromdate   TO s_augdt-low,
              todate     TO s_augdt-high.
        APPEND s_augdt.
      ENDIF.
    Selecting the records from the database ****************
      IF s_bukrs IS INITIAL AND s_blart IS INITIAL.
      Select all documents of company code 1000, *********
      4200 and 8000, and allowed document types  *********
        SELECT belnr gjahr augdt augbl bukrs
            blart bldat xblnr lifnr wrbtr shkzg
            FROM bsak INTO CORRESPONDING FIELDS OF TABLE i_data
            FOR ALL ENTRIES IN i_doctype
            WHERE blart EQ i_doctype-blart
            AND augdt IN s_augdt
            AND ( bukrs = '1000' OR bukrs ='4200'  OR
                ( bukrs = '8000' AND blart NE 'ZP' ) ).
       loop at i_data.
    Exclude reversed documents
          select single stblg into ws_stblg
                 from   bkpf
                 where  bukrs = i_data-bukrs
                   and  gjahr = i_data-gjahr
                   and  belnr = i_data-belnr.
          if not ws_stblg is initial.
             delete i_data.
          endif.
       endloop.
      ELSEIF s_blart IS INITIAL.
      Select all documents of allowed document types ******
           and inputted company code           ************
        SELECT belnr gjahr augdt augbl bukrs
           blart bldat xblnr lifnr wrbtr shkzg
           FROM bsak INTO CORRESPONDING FIELDS OF TABLE i_data
           FOR ALL ENTRIES IN i_doctype
           WHERE blart EQ i_doctype-blart
             AND augdt IN s_augdt
             AND bukrs IN s_bukrs .
        LOOP AT i_data.
    Exclude documents of type ZP
    for company code 8000.
          IF i_data-bukrs = '8000' AND i_data-blart = 'ZP'.
            DELETE i_data.
            continue.
          ENDIF.
      Exclude reversed documents
          select single stblg into ws_stblg
                 from   bkpf
                 where  bukrs = i_data-bukrs
                   and  gjahr = i_data-gjahr
                   and  belnr = i_data-belnr.
          if not ws_stblg is initial.
             delete i_data.
             continue.
          endif.
        ENDLOOP.
        READ TABLE i_data INDEX 1.
        IF sy-subrc NE 0.
          MESSAGE i999 WITH 'No records have been selected'.
          EXIT.
        ENDIF.
      ELSE.
      Select the documents matching the company codes  *****
    and document types inputted in the selection screen ****
        SELECT belnr gjahr augdt augbl bukrs bldat xblnr
           blart lifnr  wrbtr shkzg
           FROM bsak INTO CORRESPONDING FIELDS OF TABLE i_data
           WHERE bukrs IN s_bukrs AND blart IN s_blart
             AND augdt IN s_augdt.
        SORT i_data BY blart.
        LOOP AT i_data.
      Filtering the records selected
      based on the document type
          READ TABLE i_doctype WITH KEY blart = i_data-blart.
          IF sy-subrc NE 0.
            DELETE i_data.
            continue.
          ENDIF.
      Exclude documents of type ZP
      for company code 8000.
          IF i_data-bukrs = '8000' AND i_data-blart = 'ZP'.
            DELETE i_data.
            continue.
          ENDIF.
      Exclude reversed documents.
          select single stblg into ws_stblg
                 from   bkpf
                 where  bukrs = i_data-bukrs
                   and  gjahr = i_data-gjahr
                   and  belnr = i_data-belnr.
          if not ws_stblg is initial.
             delete i_data.
             continue.
          endif.
        ENDLOOP.
        READ TABLE i_data INDEX 1.
        IF sy-subrc NE 0.
          MESSAGE i999 WITH 'No records have been selected'.
          EXIT.
        ENDIF.
      ENDIF.
      IF sy-subrc NE 0.
        MESSAGE i999 WITH 'No records have been selected'.
        EXIT.
      ENDIF.
    credit/debit identification ***********************
      LOOP AT i_data.
        IF i_data-shkzg EQ 'H'.
          i_data-wrbtr = i_data-wrbtr * 1.
        ELSEIF i_data-shkzg EQ 'S'.
          i_data-wrbtr = i_data-wrbtr * -1.
        ENDIF.
        MODIFY i_data.
      ENDLOOP.
    for summarizing ******************************
      LOOP AT i_data.
        MOVE-CORRESPONDING  i_data TO i_data1.
        COLLECT i_data1.
      ENDLOOP.
    Vendor informations and Check Informations *****************
      SELECT lifnr name1 sortl
             FROM lfa1
             APPENDING CORRESPONDING FIELDS OF TABLE i_lfa1
             FOR ALL ENTRIES IN i_data1
             WHERE lifnr = i_data1-lifnr.
      SELECT chect vblnr gjahr zbukr FROM payr APPENDING CORRESPONDING
                                FIELDS OF TABLE i_payr FOR ALL ENTRIES
                                IN  i_data1   WHERE vblnr = i_data1-augbl
                                AND gjahr = i_data1-augdt(4)
                                AND zbukr = i_data1-bukrs.
      SORT i_data1 BY augbl gjahr bukrs lifnr.
      SORT i_payr  BY vblnr gjahr zbukr.
      SORT i_lfa1  BY lifnr.
      LOOP AT i_data1.
        READ TABLE i_payr WITH KEY vblnr = i_data1-augbl
                                   gjahr = i_data1-gjahr
                                   zbukr = i_data1-bukrs.
        IF sy-subrc EQ 0.
          i_data1-chect = i_payr-chect.
        ENDIF.
        READ TABLE i_lfa1 WITH KEY lifnr = i_data1-lifnr.
        IF sy-subrc EQ 0.
          i_data1-name1 = i_lfa1-name1.
          i_data1-sortl = i_lfa1-sortl.
        ENDIF.
        i_data1-status = 'X'.
        MODIFY i_data1.
      ENDLOOP.
    **The records are sorted by clearing date, check number and doc type**
      SORT i_data1 BY augdt chect blart.
    **********The header record is outputted on the screen****************
      PERFORM write_header.
    ********Data is moved to internal table in the file format *************
      PERFORM move_data.
    Line items are outputted on the screen *********************
      PERFORM write_output.
    *&                   Form  write_header                             &*
    *&        This outputs the header information to screen             &*
    FORM write_header.
      SKIP.
       SET PF-STATUS 'LIST'.
    Outputting the header information *********************
      WRITE : / 'Extraction Date : ' , header-ext_date.
      WRITE : / 'Extraction Time : ' , header-ext_time.
      FORMAT COLOR 1." INTENSIFIED.
      SKIP.
      ULINE AT 0(190) NO-GAP.
    Outputting line level information **********************
      WRITE:/  sy-vline NO-GAP,
            (10) 'DOC NUMBER',
              sy-vline NO-GAP,
             (4) 'F-YR',
               sy-vline NO-GAP,
             (6) 'C-CODE',
              sy-vline NO-GAP,
             (10) 'CHECK NUM',
              sy-vline NO-GAP,
             (10) 'VENDOR NUM',
              sy-vline NO-GAP,
             (35) 'VENDOR NAME',
               sy-vline NO-GAP,
             (12) 'INVOICE DATE',
              sy-vline NO-GAP,
             (16) 'INVOICE NUMBER',
              sy-vline NO-GAP,
             (12) 'PAID DATE',
               sy-vline NO-GAP,
             (15) 'INVOICE AMOUNT',
              sy-vline NO-GAP,
             (2) 'SC',
              sy-vline NO-GAP,
             (16) 'REFERENCE FI DOC',
               sy-vline NO-GAP,
             (15) 'SORT FIELD',
               sy-vline NO-GAP.
      ULINE AT 0(190) NO-GAP.
    ENDFORM.                    " write_header
    *&                      FORM  MOVE_DATA                             &*
    *&    Formats data in internal table as is required in the file     &*
    FORM move_data.
      LOOP AT i_data1.
    Document number and fiscal year should be separted by '|' *****
        CONCATENATE i_data1-belnr i_data1-gjahr INTO fidoc_year
                    SEPARATED BY '|'.
        MOVE i_data1-bukrs TO comp_code.
        MOVE i_data1-chect TO check_numbr.
    Vendor number and vendor name should be separted by '|' *****
        CONCATENATE i_data1-lifnr i_data1-name1 INTO vendor
          SEPARATED BY '|'.
        SHIFT vendor LEFT DELETING LEADING '0'.
        SHIFT vendor RIGHT DELETING TRAILING space.
    Date fields converted to MM/DD/YYYY format ****************
        MOVE i_data1-bldat+0(4) TO yy.
        MOVE i_data1-bldat+4(2) TO mm.
        MOVE i_data1-bldat+6(2) TO dd.
        CONCATENATE mm dd yy INTO inv_date SEPARATED BY '/'.
        MOVE i_data1-xblnr TO inv_nbr.
        SHIFT inv_nbr RIGHT DELETING TRAILING space.
        MOVE i_data1-augdt+0(4) TO yy.
        MOVE i_data1-augdt+4(2) TO mm.
        MOVE i_data1-augdt+6(2) TO dd.
        CONCATENATE mm dd yy INTO paid_dat SEPARATED BY '/'.
        MOVE i_data1-wrbtr TO inv_amt.
        CONDENSE inv_amt.
       SHIFT inv_amt RIGHT DELETING TRAILING space.
        MOVE i_data1-status TO status.
        MOVE i_data1-augbl TO ref_doc.
        CONCATENATE fidoc_year
                    comp_code
                    check_numbr
                    vendor
                    inv_date
                    inv_nbr
                    paid_dat
                    inv_amt
                    status
                    ref_doc
           INTO i_final_file-record SEPARATED BY '~'.
        APPEND i_final_file.
      ENDLOOP.
    ENDFORM.                    " MOVE_DATA
    *&                      Form  write_output                          &*
    *&                  Outputs all data to screen                      &*
    FORM write_output.
      LOOP AT i_data1.
        FORMAT COLOR 2 INTENSIFIED.
    Outputting line level information *******************
        WRITE :  /  sy-vline NO-GAP,
                 (10) i_data1-belnr,
                   sy-vline NO-GAP,
                (4) i_data1-gjahr,
                   sy-vline NO-GAP,
                 (6) i_data1-bukrs,
                   sy-vline NO-GAP,
                (10) i_data1-chect,
                  sy-vline NO-GAP,
                  (10) i_data1-lifnr,
                 sy-vline NO-GAP,
                 (35) i_data1-name1,
                   sy-vline NO-GAP,
                 (12) i_data1-bldat MM/DD/YYYY,
                   sy-vline NO-GAP,
                 (16)  i_data1-xblnr,
                   sy-vline NO-GAP,
                 (12) i_data1-augdt MM/DD/YYYY,
                   sy-vline NO-GAP,
                 (15) i_data1-wrbtr,
                   sy-vline NO-GAP,
                 (2) i_data1-status,
                   sy-vline NO-GAP,
                 (16) i_data1-augbl,
                   sy-vline NO-GAP,
                 (15) i_data1-sortl,
                 sy-vline NO-GAP.
      ENDLOOP.
      ULINE AT 0(190) NO-GAP.
    ENDFORM.                    " write_output
    In the program, I am downloading only the list.. The description of report outputted in the beginning of the report is not downloaded to excel.
    What has to be taken into consideration is that, the structure of the table i_data1 which contains the data to be downloaded to the table.
    I hope that this will help you.
    Regards,
    Susmitha

  • Regarding uploading excel sheet in eCATT

    Hi,
    I would like to know how to upload excel sheet in ecatt.I am using 6.4 version.I have created a test script and test configuration.It would be great if anyone suggests me the procedure or path how to upload excel sheet to test the scripts.
    Thanks,
    Aparna.

    Hi
    See the links
    check these link,
    eCATT- An Introduction
    /people/sumeet.kaul/blog/2005/07/26/ecatt-an-introduction
    Creating Test Scripts
    /people/sumeet.kaul/blog/2005/08/10/ecatt-creating-test-scripts
    eCATT Logs
    /people/sapna.modi/blog/2006/04/18/ecatt-logs-part-vi
    eCATT Scripts Creation – TCD Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation-150-tcd-mode-part-ii
    Creation of Test Data Container
    /people/sumeet.kaul/blog/2005/08/24/ecatt-creation-of-test-data-container
    eCATT Scripts Creation - SAPGUI Mode
    /people/sapna.modi/blog/2006/04/10/ecatt-scripts-creation--sapgui-mode-part-iii
    Integrating ECATT & MERCURY QTP Part -1
    /people/community.user/blog/2007/01/02/integrating-ecatt-mercury-qtp-part-1
    Using eCatt to Test Web Dynpro ABAP
    /people/thomas.jung/blog/2006/03/21/using-ecatt-to-test-web-dynpro-abap
    and
    -command reference
    http://help.sap.com/saphelp_nw04/helpdata/en/c6/3c333b40389c46e10000000a114084/content.htm
    /people/sapna.modi/blog/2006/04/10/ecatt--an-introduction-part-i
    http://prasadbabu.blogspot.com
    https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=test_tool_integration_for_sap_e-catt.htm
    http://help.sap.com/saphelp_nw04/helpdata/en/1b/e81c3b84e65e7be10000000a11402f/frameset.htm
    http://www.erpgenie.com/ecatt/index.htm
    hope this helps.
    Reward points if useful
    Regards
    Anji

  • Regarding the o/p in excel sheet

    hi experts,
    i have developed one report in alv when i transfer it to excel sheet its coming rt in development server,,but in production server when i take it to excel sheet the material number gets cut (half) and extra zero is coming ...why plz help me.....

    hi,
    go to the following thread
    Can we generate output of a report in an Excel Sheet?
    weird problem when downloading the output to an excel sheet
    ALV Report output in Excel format
    <b>plz reward if  useful</b>
    Swati

  • Regarding saving of excel sheet to presentation server...

    Hi,
    am using OLE inorder to create the EXCEL sheet, but the problem is am not able to save it to presentation server using the following program.. We have to do it Manually..
    Please go through it and help me and how will i save it using programm...
    this report demonstrates how to send some ABAP data to an
    EXCEL sheet using OLE automation.
    INCLUDE ole2incl.
    handles for OLE objects
    DATA: h_excel TYPE ole2_object,        " Excel object
          h_mapl TYPE ole2_object,         " list of workbooks
          h_map TYPE ole2_object,          " workbook
          h_zl TYPE ole2_object,           " cell
          h_f TYPE ole2_object,            " font
          h_cell TYPE ole2_object,
          p_filename TYPE rlgrap-filename.
    TABLES: spfli.
    DATA  h TYPE i.
    table of flights
    DATA: vert TYPE numc2 VALUE '90'.
    DATA: h_format TYPE ole2_object,
          l_cols TYPE ole2_object,
          l_entcol TYPE ole2_object,
          color TYPE char1 VALUE '4'.
    DATA: it_spfli LIKE spfli OCCURS 10 WITH HEADER LINE.
    *&   Event START-OF-SELECTION
    START-OF-SELECTION.
    read flights
      SELECT * FROM spfli INTO TABLE it_spfli UP TO 10 ROWS.
    display header
      ULINE (61).
      WRITE: /     sy-vline NO-GAP,
              (3)  'Flg'(001) COLOR COL_HEADING NO-GAP, sy-vline NO-GAP,
              (4)  'Nr'(002) COLOR COL_HEADING NO-GAP, sy-vline NO-GAP,
              (20) 'Von'(003) COLOR COL_HEADING NO-GAP, sy-vline NO-GAP,
              (20) 'Nach'(004) COLOR COL_HEADING NO-GAP, sy-vline NO-GAP,
              (8)  'Zeit'(005) COLOR COL_HEADING NO-GAP, sy-vline NO-GAP.
      ULINE /(61).
    display flights
      LOOP AT it_spfli.
        WRITE: / sy-vline NO-GAP,
                 it_spfli-carrid COLOR COL_KEY NO-GAP, sy-vline NO-GAP,
                 it_spfli-connid COLOR COL_NORMAL NO-GAP, sy-vline NO-GAP,
                 it_spfli-cityfrom COLOR COL_NORMAL NO-GAP, sy-vline NO-GAP,
                 it_spfli-cityto COLOR COL_NORMAL NO-GAP, sy-vline NO-GAP,
                 it_spfli-deptime COLOR COL_NORMAL NO-GAP, sy-vline NO-GAP.
      ENDLOOP.
      ULINE /(61).
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               text       = text-007
           EXCEPTIONS
                OTHERS     = 1.
    start Excel
      CREATE OBJECT h_excel 'EXCEL.APPLICATION'.
    PERFORM ERR_HDL.
      SET PROPERTY OF h_excel  'Visible' = 1.
      CALL METHOD OF h_mapl 'SaveAs' EXPORTING #1 = 'C:\Documents and Settings\jrozar\Desktop\SKV.XLS'.
    PERFORM ERR_HDL.
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               text       = text-008
           EXCEPTIONS
                OTHERS     = 1.
    get list of workbooks, initially empty
      CALL METHOD OF h_excel 'Workbooks' = h_mapl.
      PERFORM err_hdl.
    add a new workbook
      CALL METHOD OF h_mapl 'Add' = h_map.
      PERFORM err_hdl.
    tell user what is going on
      CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              PERCENTAGE = 0
               text       = text-009
           EXCEPTIONS
                OTHERS     = 1.
    output column headings to active Excel sheet
      PERFORM fill_cell1 USING 90 1 1 1 'Flug'(001).
      PERFORM fill_cell1 USING 90 1 2 0 'Nr'(002).
      PERFORM fill_cell1 USING 90 1 3 1 'Von'(003).
      PERFORM fill_cell1 USING 90 1 4 1 'Nach'(004).
      PERFORM fill_cell1 USING 90 1 5 1 'Zeit'(005).
      LOOP AT it_spfli.
    copy flights to active EXCEL sheet
        h = sy-tabix + 1.
        PERFORM fill_cell USING h 1 0 it_spfli-carrid.
        PERFORM fill_cell USING h 2 0 it_spfli-connid.
        PERFORM fill_cell USING h 3 0 it_spfli-cityfrom.
        PERFORM fill_cell USING h 4 0 it_spfli-cityto.
        PERFORM fill_cell USING h 5 0 it_spfli-deptime.
      ENDLOOP.
    changes by Kishore  - start
    CALL METHOD OF H_EXCEL 'Workbooks' = H_MAPL.
    CALL METHOD OF H_EXCEL 'Worksheets' = H_MAPL." EXPORTING #1 = 2.
    PERFORM ERR_HDL.
    add a new workbook
    CALL METHOD OF H_MAPL 'Add' = H_MAP  EXPORTING #1 = 2.
    PERFORM ERR_HDL.
    tell user what is going on
    SET PROPERTY OF H_MAP 'NAME' = 'COPY'.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
        EXPORTING
              PERCENTAGE = 0
              TEXT       = TEXT-009
          EXCEPTIONS
               OTHERS     = 1.
    output column headings to active Excel sheet
    PERFORM FILL_CELL USING 1 1 1 'Flug'(001).
    PERFORM FILL_CELL USING 1 2 0 'Nr'(002).
    PERFORM FILL_CELL USING 1 3 1 'Von'(003).
    PERFORM FILL_CELL USING 1 4 1 'Nach'(004).
    PERFORM FILL_CELL USING 1 5 1 'Zeit'(005).
    LOOP AT IT_SPFLI.
    copy flights to active EXCEL sheet
       H = SY-TABIX + 1.
       PERFORM FILL_CELL USING H 1 0 IT_SPFLI-CARRID.
       PERFORM FILL_CELL USING H 2 0 IT_SPFLI-CONNID.
       PERFORM FILL_CELL USING H 3 0 IT_SPFLI-CITYFROM.
       PERFORM FILL_CELL USING H 4 0 IT_SPFLI-CITYTO.
       PERFORM FILL_CELL USING H 5 0 IT_SPFLI-DEPTIME.
    ENDLOOP.
    changes by Kishore  - end
    disconnect from Excel
    CALL METHOD OF H_MAPL 'Saveas' EXPORTING  #1 = 'C:\tst.xls'.
      p_filename = 'C:\tst.xls'.
      CALL METHOD OF h_mapl 'Saveas'
        EXPORTING
        #1 = p_filename.
      CALL METHOD OF h_excel 'Close'.
    FREE OBJECT H_EXCEL.
      PERFORM err_hdl.
          FORM FILL_CELL                                                *
          sets cell at coordinates i,j to value val boldtype bold       *
    FORM fill_cell USING i j bold val.
      CALL METHOD OF h_excel 'Cells' = h_zl EXPORTING #1 = i #2 = j.
      PERFORM err_hdl.
      CALL METHOD OF h_zl 'Interior' = h_format.
          IF J EQ  2.
          color = 2.
    SET PROPERTY OF h_format 'ColorIndex' = color.
        ELSE.
          color = 4.
        ENDIF.
      SET PROPERTY OF h_format 'ColorIndex' = color.
      CALL METHOD OF h_zl 'Columns' = l_cols
        EXPORTING
        #1 = 2.
      CALL METHOD OF l_cols 'EntireColumn' = l_entcol.
      CALL METHOD OF l_entcol 'Autofit'.
      SET PROPERTY OF h_zl 'Value' = val .
      PERFORM err_hdl.
      GET PROPERTY OF h_zl 'Font' = h_f.
      PERFORM err_hdl.
      SET PROPERTY OF h_f 'Bold' = bold .
      PERFORM err_hdl.
    ENDFORM.                    "FILL_CELL
    *&      Form  FILL_CELL1
          text
         -->VERT       text
         -->I          text
         -->J          text
         -->BOLD       text
         -->VAL        text
    FORM fill_cell1 USING vert i j bold val.
      CALL METHOD OF h_excel 'Cells' = h_zl EXPORTING #1 = i #2 = j.
      PERFORM err_hdl.
      SET PROPERTY OF h_zl 'Orientation' = vert.
      CALL METHOD OF h_zl 'Interior' = h_format.
        IF J EQ  2.
          color = 2.
    SET PROPERTY OF h_format 'ColorIndex' = color.
        ELSE.
          color = 4.
        ENDIF.
      SET PROPERTY OF h_format 'ColorIndex' = color.
      CALL METHOD OF h_zl 'Columns' = l_cols
        EXPORTING
        #1 = i.
      SET PROPERTY OF h_zl 'Value' = val .
      PERFORM err_hdl.
      GET PROPERTY OF h_zl 'Font' = h_f.
      PERFORM err_hdl.
      SET PROPERTY OF h_f 'Bold' = bold .
      PERFORM err_hdl.
    ENDFORM.                                                    "FILL_CELL1
    *&      Form  ERR_HDL
          outputs OLE error if any                                       *
    -->  p1        text
    <--  p2        text
    FORM err_hdl.
      IF sy-subrc <> 0.
        WRITE: / 'Fehler bei OLE-Automation:'(010), sy-subrc.
        STOP.
      ENDIF.
    ENDFORM.                    " ERR_HDL

    Hello Subhash,
    Try this
    data: sheet TYPE ole2_object.
    data: lv_file(512) default 'C:tst.xls'.
    * Save excel speadsheet to particular filename
      GET PROPERTY OF h_excel 'ActiveSheet' = sheet.
      CALL METHOD OF sheet 'SaveAs'
        EXPORTING
          #1 = lv_file     "filename
          #2 = 1.                      "fileFormat

  • Vendor open items wise ALV Grid Display (FBL1N) report to Excel Sheet

    Hi All,
    I need vendor wise open items and cleared items in ALV Grid format in excel sheet.
    I'm Trying that in T Code FBL1N, After the execution. I had select ALV Grid format like this From the menu bar->Settings-> Switch list.
    After that i get ALV  Grid format, Then i'm doing export the data to excel sheet. like this From the Menu bar->List->Export->Spread sheet.
    That time i'm getting Error Message no. 0K064, Filter criteria, sorting, totals and subtotals are not taken into account.
    I want vendor wise sorting totals and subtotals,
    How can i over come this Error please let me now.
    Thanks,
    Amar

    Hi Amar,
    Please check the KBA 2083705.
    https://websmp230.sap-ag.de/sap(bD1odSZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361706E6F7465735F6E756D6265723D3230383337303526
    Regards,
    Monika

  • Upload data from excel sheet into md61

    Hi Gurus,
                    Can anybody please tell me the solution like how to upload the data from excel sheet into the MD61
    if u suggest me to write an ABAP code then its fine or any other way would be great
    and can u also send me the abap code i would be thankful to all

    Hi,
    I can be done in 2 ways.
    1. Using LSMW you can upload your MD61 demand thru Excel sheet.
    2. You can use BDC to upload the demand from Excel. For this you need to take help from the ABAP. You need to record the macro usinf SHDB and the table maintenance will be taken care by the developer.
    For LSMW you need not depend on your developer, as a functional consultant you can do it yourself.
    Regards,
    V. Suresh

  • Upload  in Excel Sheet for Mid Year Go Live

    Hi Friends,
    How to upload T558 B & C tables in Excel Sheet for  Mid Year Go Live.
    Awaiting for your reply
    Regards
    Praveen P

    Hi,
    t558c template here between postingdate and amount two blank tab is there
    client     pernr     period     country     wagetype     postingdate               amount
    t558b template here between period and posting date two blank tab is there
    client     pernr     period               postingdate     periodparameter     year     period     monthstartrdate     enddate month
    and the date format is YYYYMMDD
    Edited by: BALAPANI on Oct 13, 2009 12:19 PM

  • Excel Sheet with WBS

    Hi ,
    i have attached an excel sheet with wbs after that when i change contents or write something and when i saved it the sheet is not changing . i have unprotectd the sheed ,
    can anybody clear me what is the problem
    Thanks in advance
    Regards
    Rama Shanker Sharma

    Hi,
    Would you please share your experience to solve this problem?
    Recently, we got the same problem.
    Thanks ahead,
    Ecco

  • The goal is to synchronize an excel sheet using Microsoft Excel 2010 with Sharepoint 3.0

    The goal is to synchronize an excel sheet using Microsoft Excel 2010 with Sharepoint 3.0. We have already installed an add-in (Excel 2007 Add-in: Synchronizing Tables with SharePoint Lists) that was supposed
    to help the synchronization of excel to Sharepoint, but it did not work. We would like to synchronize information about a calendar from excel to Sharepoint 3.0, so every time a change is made in excel it automatically updates in Sharepoint.

    ootb, changes in excel don't sync with a SharePoint list, the other way around is possible.
    Kind regards,
    Margriet Bruggeman
    Lois & Clark IT Services
    web site: http://www.loisandclark.eu
    blog: http://www.sharepointdragons.com

  • How to Upload Excel sheet in DB or internal table using SAP NetWeaver ABAP

    Dear All experts,
    Pls provide guidance  to Upload Excel sheet in DB or internal table using ABAP in  ( SAP NetWeaver stack  )
    Regards
    Machindra
    Edited by: Machindra Patade on Apr 8, 2010 3:07 PM

    Please search before posting.
    Thread locked.
    Thomas

Maybe you are looking for

  • Crystal Reports scheduled in CMC Fails -Error: database connector error

    Hi, I am trying to schedule Crystal Report from the CMC. The report is created on top of InfoCube out of the SAP BI 7.0 server. On scheduling I am getting a particular error as u201CDatabase Connector Erroru201D. Is there any way to troubleshoot this

  • User name in email

    My iphone syncronize email with my company Exchange. When I receive an email, the sender's name appears correct but when I open this email, it shows only part of the name. In the screen where shows all email, it appears Eduardo Oliveira Ribeiro, but

  • Live meeting integration with Sharepoint 2010

    Hi all,       We have the following requirement:       a. User should be able to start live meeting from Sharepoint 2010 portal (Note: OCS 2007 R2 is part of the environment, Users online presence is shown in Portal).       b. Users should be automat

  • Settings for external editors, i.e. Nik

    I have started setting up external editor presets for my various NIK Software applications. But what I don't have a handle on is what settings I should use for such things as: I'm just guessing on File Format, Color Space, Bit Depth, Resolution, Comp

  • Wrror while creating yahooiview

    HI experts, iam trying to create yahoo iview.. i have create system object using webapplication template. and created iview .. when i click preview.. i am getting error: \Portal Runtime Error An exception occurred while processing a request for : iVi