Regarding Export Data Source !!!!!

Hi Gurus,
i have a requirement to create a export data source in production system for master data infoobject.then i have to replicate it into Development system. The doubt is once this export data source is created in the production system where i can find this? RSA5...or there is some other transaction? and before replicating these export datasource to Developmentsystem, do i need to activate it?( I know there is prefix of 8 in export data source).
Immediate reply will be appreciated.
Thanks in advance.
Regards.
Agupta

Hi,
You can create it> master data InfoObject>rt click>additional function>export data source.Now you can find it in the datasources in the Source System. Go to Source systems and go to Datasource overview for your BW system. You should find the datasource 8****** under BW Datasources-> Business Info Warehouse -> Data Marts -> Data Marts Master Data.
Regards
CSM Reddy

Similar Messages

Creation of the export data source failed

trying to activate ods but getting this message that the creation of the export data source failed.
and it also gives message that RFC Connection to source system is damaged===> no metadata upload
Please can someone help me with this.
Thanks in advance.
Michelle

Hi,
Check ur source system connection. by going to RSA1-> Source System-> right click and then select check.
U will get the info about the source system Connection. IF RFC has failed then better be in touch with ur basis.
Or try restoring ur source system connection by
Source system-> Restore.
Its sets all the default conenctions b/n ur systems.
Once again check the connection now. if it says ok.. then try do the export data source and then assign the data source to info source and then maintain the Update rules..
Hope this helps-
Regards-
MM

Help with Enhancing Export Data Source

Folks,
I have a scenario where the infocube is used an export data source
In the data source I realize that the 0customer is not available
I changed the extract structure of the datasource to include 0customer but I have still not got the 0customer as part of the datasource
Would appreciate help on how the datasource can be enhanced to include 0customer; pls note that the infocube does have 0customer
thanks for your time
regards

Hi,
Can you tell me which datasource you are using to extract the value for 0customer from R/3?
You check the data source for data ( For 0customer) by using the extract checker tcode rsa3.
You can also check for the datasources in r/3 by uising the tcode rsa6.
Hope this helps.
Regards,
K.Manikandan.

Customize trf rules for an export data source

Hello
I am loading data from an ODS into another ods and cube through its 'export data source'. Now, I want to customize it by writing some routines in the mapping. I am able to write my routines in the upd rules but not in the trf rules. Why is this so? I know that the trf rules are system generated, is that why users cant edit it?
Regards,
Srinivas.

Hi Atul,
You are right , transfer rules cannot be written, though transfer structure can be appended with new fields.
-Vikram

U0094Generate Export data Source" form multi provider.

Hi,
If we give the context menu to the multi provider we get an option that Generate Export data Source. That means is it possible to generate the data source from multi provider. If yes , then we will load data from one multi provider to another data target.
How can we see the data in Multiprovider.
Regards,
Venkata Sharma

A Multiprovider has no storage of data.
But you use a query build on top of it, and see the data from the Datatargets that are used on that Multiprovider (can be cubes, info-objects, info-sets).
I am working in BI 7.0 and I don't have the option of generating the export datasource!
Hope it's clear now.

Diff b/w Data Mart & Generate Export data source

HI All
Here i want one small clarification.
will you plze help me regarding of the following
I want to know the Difference between Data Mart & Generate Export data source.
In my point of you both are little bit same.
any way some budy explain with full details.
If you provide any help doc its too help ful for me.
Regards n Thanks
kgb

Hi kgbm,
This my point of view:
1)DataMart: in BI you use this term for identify a specific area of analysis in your DataWarehouse. Generally it is obtained with an aggregation of data of other structures, or combining internal data with external data.
2)Generate Export D.S.: it is the technical tool to obtain an extractor to feed other structures, called DataMart.
Ciao.
Riccardo.

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

Data load issue with export data source - BW 3.5

Hi,
We are facing issues in loading data with the help of export data source.
We have created export data source of 0PCA_C01 cube. With the help of this export datasource, we are loading data to other custom cube. Scenario is working fine in development server.
But when we transported objects to quality server data is not getting loaded to custom target cube.
It is extracting zero records. All transports are ok and we have generated export datasource in quality before transports .Also regenerated export datasource after transport and activated infosource, update rule via RS* programs. Every object is active but data is not getting extracted.
RSA3 for 80PCA_C01 datasource isn't extracting any record in Quality. Records getting extracted in development. We are in BW 3.5 with patch level 19.
Please guide us to resolve the issue.
Thanks,
Aditya

Hi
Make sure that you have relevant Role & Authorization at Quality/PRS.
You have to Transport the Source Cube first and then Create a Generate Export Data Source in QAS. Then, replicate data sources for BW QAS Soruce System. Make sure this replicated Data Source in QAS. Only then can transport new update rules for second cube.
Hope it helps and clear

Error While Transporting export Data Source

Hi Experts,
We have a requirement to transport a data source from development to quality system through acceptance box.
We need to transport an export data source which contains 40 fields. But when I captured the data source in development system and transported the same to acceptance box it's displaying only 38 fields. 2 Fields are missing from the data source which are present in development system and also source system of export data source.
Please suggest how to get these 2 fields in acceptance box.
Thanks,
Sachin Motgi

Hi,
Check if your data source extract structure is having all 40 fields.
Save and generate the data source again, replicate and then transport.
I hope it will help.
Thanks,
S

Problem with delta update on customised export data source.

Hi all BW gurus,
I have created several customised export data sources in the R/3 system. And I have made use of the utility program <Z_CHANGE_DELTA_PROCESS> to update the ROOSOURCE table.
While this can result in being able to do initial update (instead of full update), the subsuquent delta update is not working.
In RSA7, the datasource is with green light and in RSA3, the extractor can extractor data out of it.
Does anybody have some idea on this?
I heard that there is a way to change the Business Transaction Event (BTE), but I don't quite understand how this is performed. And wonder if this is the only way out. To me, the triggering point would be the same, meaning the InfoPackage would be executed, then call the extractors in R/3 to extract the delta update in order to load into the InfoCube.
And how do others do for executing delta update of the customised data source?
Thanks a lot!!
The utility program of <Z_CHANGE_DELTA_PROCESS>:
=================================================
report z_change_delta_process .
*P_DATAS DataSource
*P_DELTAP Delta Process for DataSource
parameters:
p_datas type roosource-oltpsource,
p_deltap type roosource-delta.
tables:
roosource.
data:
ls_roosource type roosource.
if p_datas(2) ne 'Z_'.
   message 'The DataSource needs to begin with ''Z_''.' type 'E'.
endif.
select single * from roosource into ls_roosource
       where oltpsource = p_datas
       and objvers = 'A'.
if sy-subrc eq 0.
   ls_roosource-delta = p_deltap.
   update roosource from ls_roosource.
message 'The DataSource has been updated successfully.' type 'I'.
else.
   message 'The DataSource entered is not valid, try again.' type 'E'.
endif.

Doesn't anyone have any idea on this topic?
Appreciate for all the help. Thanks.

How to find Info Source for Export Data source in Data Marts node

Hi
I need to load data from ODS to Info Cube. I created the Export Data source for the ODS. I can see the Export Data Source but in the Data Marts node of Info Source i cannot find the Info Source for the Export Data source i created. I replicated Data sources in the BW source system. I also tried to use Insert Lost Nodes from the Context Menu of the InfoSource node but nothing worked. Please let me know what i need to do to see the Info source in the Data Marts.
Thanks
Padma

In the infosource tab in RSA1 - use settings --> display generated objects
you will be able to see the datamart infosources..

Export Data Source Transport Problem

Hi All,
I have IO FI Super Number - did export data source for that and generated 8zfssupno for myself BW system in Dev system.
Used that export DS for another MD Account and created transfer rule.
Now when i try to transport the Request to QA env. the export DS request shows status succesfull but cannt find 8zfssupno DS into QA system and my transfer rule request has been failed to transport.
i collected DS twice but both requests are also not identical.
One has Object Directory Entry -->R3TRISFS8ZFSSUPNOT
and the other one dont.
i can see my export DS in t-code RSA6 also.
Do i need to transport the main IO FI Super Number before transporting export DS ?
can someone pl. give me the solution ?

the error log:
Extract structure /BIC/CE8ZFSSUPNO is not active
The extract structure /BIC/CE8ZFSSUPNO of the DataSource 8ZFSSUPNOT is invalid
Errors occurred during post-handling RSA2_DSOURCE_AFTER_IMPORT for OSOA L
The errors affect the following components:
<b>Thats means DEV BIW should have conversion mapping with QA BIW as the source system conversion.</b> ---> How to do that ? understood that its for myself BW system so it should be covert to QA from Dev.
Yes, finally i did it manually. but as u said it should work i can try to transport it to other env. please advise.
Message was edited by:
        Keral Smith

Export Data Sources DEV Transport to Acceptance

Hi Friends I am having a Export Data Source 80VELEXT created in Development System. When I transport that Datasource to Acceptance. It is not getting activated. I checked in RSLOGSYSMAP Table. I do not see the DB4CLNT120 --AB4CLNT110 Check mark. Is it required to be ticked to activate this. But when I consulted MY SAP Basis team they told it is not required to be checked. They told only D53CLNT120 -- A53CLNT120 ECC - ECC is only required. Please help me how to activate this Export Datasource in Acceptance.
Thanks
Soniya Kapoor

Hi Ravi, Please tell me exact step where you want me to change the source system to your Acceptance system Is it in the table RSLOGSYSMAP. OR where. I just created these datasources IN BI and nothing else is required no dtp no trans nothing. Just the Datasource and I need to transport this.
Please help
Thanks
Soniya

ERROR WHEN GENERATING EXPORT DATA SOURCE

Dear Members,
I am getting an error when generating export data source for Info Cube. I'm creating an Info Cube based on already existed info cube. Literally I am copying all the settings of an info cube to new Info Cube. The scenario is to load the data from one Info Cube to the other. The creation of Info Cube from an Info Cube is successful. But the problem is when I am generating export data source the following error is occurred.
Error: Data Source 81c_svrr does not exist in source system B3TCLNT800 of version A.
what could be the reason for the error?
Please let me know.
Thanks in advance.

Dear Venkat,
The problem is because of error in the Myself Connection , Check the Myself connection in the source systems and the activate and restore the connection and try, it should work..
Thanks,
Krish

Regarding genric data source

hi guyz,
     i have some doubts regarding generic data source for the following qeastion.
   1).what is ALE pointer(ALE delta)?.in which senario we use this?.can u explain me with one realtime senario so that i can understand easily.
   2).what is SLA? explain with one senario.
   3).when we use these t-codes: RSMO,SM50 in process chain.

1. ALE is Application Link Enabling (ALE)
It is the set of tools, programs, and data definitions that provides the mechanism for distributing SAP functionality and data across multiple systems. ALE enables the construction and operation of distributed applications.
Its purpose was to overcome the limitations of a single SAP system. A single SAP system that runs on top of one database often does not fulfill the needs of larger corporations, either from a business or a technical perspective.ALE allows the implementation of loosely coupled SAP systems; each of the SAP systems has its own database and is essentially independent from the other systems. ALE allows us to distribute data between different systems and different business processes.
ALE enables you to transfer data(master/transactional data) from an SAP system to SAP/Non-SAP system you can use ALE.This done using IDOCs.
ALE can be divided into
Output Process: Extracting data from database and putting it in the IDOC.
Communication Process: Which involves transferring the IDOC to the target system.
Inbound Process: Posting the IDOC data into the tables of the receiver system.
2. SLA is service level agreement, what you need on this ?? Its an agreement betn client and service provider regarding the service request and their resolution. Like P! issue should be solved in 1 hr , P2 issue 3 hr..something like that, varies from client to client
3. RSMO is used to monitor the data load in BW. You have several options to restrict your criteria to monitor load.
In SM37 if you goto the job and double click on that, it brings you to another screen with some details for the job. IN this screen if you hit the job details button in the resulting screen, it'll show you a PID number and an executing server number. With this combination, you can check the job in SM50.
Assign Points if helpfull.
Thanks
Tripple k

Regarding Export Data Source !!!!!

Similar Messages

Maybe you are looking for