Regarding extract structures.

Can anyone please let me know of extract structures of finance module or for accounting., as at interview asking
extract names, can anyone share if had any document.
Thanks in advance.

http://help.sap.com/saphelp_nw70ehp1/helpdata/en/65/7beb3cad744026e10000000a11405a/frameset.htm

Similar Messages

Details regarding extract structure

Hi
I am new to BW .. i am asked to find from where data for particular set of fields are coming from ie the tables they come from. The application component is 04 SHOP FLOOR CONTROL.i was given a link . http://help.sap.com/saphelp_erp2005vp/helpdata/en/b7/413f3f2615e07fe10000000a114084/frameset.htm
In this link the table of origin is blank . I want to know from which table is the data being populated.
Thanks in advance.

hi,
<b>
Table-Field--Descrption.</b>
AFKO VERID Prod. Version
AFKO WERKS Plant
AFPO LTRMI Act.deliv.date
AFPO MATNR Material
AFVG ASVRG Scrap quantity
AFVG GRUND Reason
AFVG LMNGA Confirmed qty
AFVG MEINH Act./Op. UoM
AFVG MGVRG Operation qty
AFVG VORNR Oper./Act.
AFVG XMNGA Confirmed scrap
With rgds,
Anil Kumar Sharma .P

Changes in extract structure

Hello All,
The extract structure for 2lis_11_vaitm has been changed and since then whenever I try to execute the datasource using RSA3.
I get an error Import_mismatch_error.
The extractor was working fine in dev. So I collected one structure which was missing in quality.
After releasing the same in quality, I deleted the setup tables and did run RSA3 - I got 0 records.
As per the SAP note 328181 - the old Sales orders are not compatible with the new structure and so we get the same error.
If any new documents are posted they will come in RSA3. How do I make sure that in Production I dont miss any data?
Regards,
Nikekab

Hello Venkat,
I found one error description though:
Error when resetting DataSource 2LIS_11_VAITM OKQCLNT332 to the active version
Message no. RSO410
Diagnosis
Errors arose when activating DataSource 2LIS_11_VAITM. An active version already existed before theactivation.
System Response
DataSource 2LIS_11_VAITM could not be resetto the old active version. Since the generated objects no longer correspond to the old active version, they were reset to inactive.
Procedure
The old active version of DataSource 2LIS_11_VAITMcan no longer be used. Remove the cause ofthe activation error and activate DataSource 2LIS_11_VAITM anew.
Regards,
NIKEKAB

Extract structure does not exist at the time of transport

HI ,
i am facing an shortdump error while transporting customized copa data source from r/3 dev to r/3 qua. The error analysis is
Extract structure does not exist at the time of transport
Long text of error message:
Technical information about the message:
Message class....... "RD"
Number.............. 041
Variable 1.......... " "
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
please provide the solution asap

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

Error while saving Extract Structure

Hi Friends,
We have enhanced the DataSource 0FI_AR_4 by adding new feilds. After that i went to Extract Structure to Un check (Deselect) the HIDE check box for newly added feilds and when i save the structure it is throwing the Error The OLTP source still has errors. When i go to detail it is giving message .........
*The OLTP source still has errors
Message no. R8417*
I Have checked the Extract Structure it is in Active and For the newly added Key Figures there are referenced table and Feilds.
WHat Might be the reason.
How can Deselect the check boxes for newly added At Hide Feild in the Extract Structure and Save it.
Thanks & Regards
Anand

Hi,
Check similar kind of threads in SDN
Re: The OLTP source still has errors Message no. R8417
Re: Urgent ! Error while append structure for EISBE field
Generic extractor help needed badly.
Thanks
Reddy

BW FICA extract structures corrupted after upgrade from 4.6C to ECC6

Hi All. After the upgrade an include (FKKBWP) in the extract structure FKKOPBW_BASIC contained a field belonging to the APPEND structure ZAFKKOPBW_BASIC (originating from enhancing the configured structure). Also ZAFKKOPBW_BASIC is not visible in FKKOPBW_BASIC anymore, although when checking/activating the structure it complains about duplicate fields, which can only happen if ZAFKKOPBW_BASIC is still referenced. Furthermore, some new includes have also appeared in the extract, amongst others FKKOPBW_EVOLVED.
I have not been able to find any documentation regarding this. Two different systems were upgraded and the structures were corrupted in both systems in the same way, so this is not a fluke.
The application dumps when one tries to access it via SBIW->Settings for Application-Specific DataSources->Contract accounts receivable->Define Fields for the Extraction of Open Items, because the config and structures do not match.
All of this also applies to the Cleared Items as well.
Has anybody encountered this or can somebody point me to some documentation referering to this problem?
Regards,
Johan Loock

Hi
Please refer to the SAP note 1278056 and 1278115 - PDS Display: F4-characteristic values are not selectable. Hope this will resolve your issue.
Regards,
JB

Problem in populating the new field from the extract structure. Kindly help

my requirement a new text field is added on R/3 side and I have to populate
the same field into BW.
In the R/3 a new customization table 'AAA' is created which will have
code - char 3 and
text - char 30.
The code field is added to a table BBB.
The SAP standard generic data source exracts data from the table BBB where in the new code field have been added.
Now I can the see the code field in the extract structure and not in the data source as the filed has selection value 'A' when checked in the ROOSFIELD table.
To populate the value in BW, I will be creating a Generic Master Data text wherein I fetch the values from the table 'AAA' which the fields code and text and replicate the same in BW.
In the reporting level, the code InfoObject will be selected as display both KEY and TeXT, by doing I can populate the values of TEXT in the reporting.
But to achieve the same I need to add the field code in the ODS but cannot do the same because I am not able to see the field code in the data source.
Kindly let me know how to achieve the same.
Also let me know if there is any alternate solution to populate the text field in BW.
Any Inputs will be appreciated.
Thanks

> You should get the userdatasources bound to the
> columns and assign the values of the recordset to
> each one and after that use "setLineData" to write in
> the matrix.
>
> hope it helps
Hi all,
i have created tables (non BO Tables) directly on the SQL-server and want to use recordset to populate a user form matrix.
Is there any workaround to achieve this using non BO tables?
Please provide some sample code since it is a very urgent matter.
regards
Daniel

Change the Domain of a data elements in the extraction structure

Hi experts
I was transport a extraction structure from BW DEV to BW QA System, but in STMS of QA System generated an error "Active ABAP Dictionary" then in T-code SE11 -> visualize -> Components Tab i am watching that the Data Type of a component ZBITRST is QUAN whereas in BW DEV system the Data Type is CHAR which is correct
by double-clicking the component I am watching that the domain of both is different, How I can change the domain in QA System / BIC/VQUAN_000013_000003 to / BIC/VCHAR_000003_000000?
or What is the solution to this problem?
Thanks

Hi
As you told you have correct domain for the info object in DEV system, transport this single info object through one transport.
now check whether domain of the info the info object is correct.
now you can import the extraction structure.
If you want to change the domain type, goto edit mode of info object and select the data type CHAR instead of UNIT and activate the info object. this will change the domain type of your Info Object.
Regards,
Venkatesh

Need help in ABAP code to Enhance the Extract Structure ?????

Hi all,
    I want to enhance the extract structure to get KBETR & KBRUE fields of KONP table since it didnt allow me to add those fields while creating the generic extractor because of currency key problems. I want to read all KONP records into internal table with KNUMH (Key). Next, I want to fill them into ZZKBETR & ZZKBRUE of Extract Structure ZOXUR40065 in loop.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
TABLES: KONP.
Could you please help me in completing the ABAP code?
Thanks,
Venkat.

Hello Manga,
    I have included the following code in ZXRSAU01:
WHEN 'ZREBATE'.
PERFORM ZREBATE_EXIT TABLES C_T_DATA.
After Double click on ZREBATE_EXIT on perform statement, it created ZXRSAF01 include and the following code is added in it:
FORM ZREBATE_EXIT TABLES FP_C_T_DATA STRUCTURE ZOXUR40065.
DATA:
i_t_zrebate like ZOXUR40065 occurs 0 with header line,
reb_tabix like sy-tabix.
FIELD-SYMBOLS: <l_c_t_data> TYPE ZOXUR40065.
LOOP AT fp_c_t_data ASSIGNING <l_c_t_data>.
reb_tabix = sy-tabix.
select single KBETR KBRUE
into (<l_c_t_data>-ZZKBETR,
<l_c_t_data>-ZZKBRUE,
from KONP
where KNUMH eq <l_c_t_data>-KNUMH.
if sy-subrc eq 0.
MODIFY fp_c_t_data FROM <l_c_t_data> INDEX reb_tabix.
endif.
CLEAR:reb_tabix.
ENDLOOP.
ENDFORM.
When I tried to Activate this ZXRSAF01 include, it fails with 'The FORM "ZREBATE_EXIT" does not exist'.
Should it be FP_C_T or P_C_T? I found P_C_T in ZXRSAF01 include.
What is wrong with it, please ?
   Can't I add this whole code in main include ZXRSAU01itself?
The Extractor ZREBATE is based on KONA, KONH & KONP tables. This Extractor and KONA table have the same 4000 records and KONP has 13000 records. I want to extract KBERT & KBRUE from KONP.
   Thanks in advance.
Regards,
Venkat

Error :Extract Structure does not exist for the table YFSP03A .

Hi Could you please help me to solve the above mentioned problem?
I have a requirement where i have to generate the Data Source ' 3FI_SL_FS_SI ' using the table YFSP03A .
Using the Tcode: BW03MAST i tried to assign FI-SL to the ledger but it throwed me an error that extract structure does not exit for the table YFSP03A .The reason being that i didnot create an extract structure for the table.So i tried to create it using the Tcode: BW01,but i did not have authorisation for the Transaction and BI team also could not generate as even they were not authorized to generate extract Structures.
So, Please are there any other ways to generate Extract structure for the table so that i can generate the Data source? Or is there any other means of generating the Data Source? And i couldnot access the other Tcodes viz :FAGLBW03, FAGLBW01, FAGLBW02.

Hi Bharath,
Goto SE11, put the name of your extract structure in Data type and click display, check the version of the structure. if it is inactive then goto RSA6 and activate your DS.
After activation try to retransport.
Regards,
Durgesh.
Edited by: Durgesh Gandewar on Jul 25, 2011 3:13 PM

How to find all the Master data extract structures and Extractors

I intend to create Master data dimensions closely similar to SAP BI in a 3rd party system. I would like to use SAP's standard extractors for populating the master data structures in SAP BI and then use a proprietary technology to create similar structures in a 3rd party database.
Question: How to get a complete list of all Master data extract structures and corresponding extractors?
Example: In ECC if I do SE80 and give 'Package' and 'MDX' and then press the 'display' spectacles, I get a list of structures and views under "dictionary objects" covering Material, Customer, Vendor, Plant Texts and attributes.
How do I get the remainder of the Master data extract structures viz. Purchase Info Records, Address, Org Unit etc?
Regards
Sasanka

Hi,
try the table ROOSOURCE and search the data source with string in astrick attr for master data and for text with text
This will give you the list of all the master data source in the system and it contains a column which tells about the extract structure and function module used by each.
Thanks
Ajeet

Field is there in extract structure but not in RSA6

Hi all,
second time i am asking the same question.
in tcode rsa6, when double click on extract structure i am able to see two fields for size. i have cross checked in tcode lbwe they are on left side only.But still i am not able to see those fields in rsa6.
i have replicated the datasource in bw.Under transfer rule i can those fields in comm. str., but i dont have info object to update the fields.
Please help me out....
regards,
Viren.

sorry if u have already given this info in last thread..
whats the BW version..and whats the datasource?
Vishvesh

Selecting desired fields from extract structure to datasource in CRM

hi guys... coming back to this forum with new problem...
how are you guys...
i'm using ds 0CRM_SALES_ACT_1 in CRM to extract activities related data...
by standard this data source is not supplying some fields which i needed... but when i checked in 'roosfield' table and even in extract structure 'CRMT_BW_DS_ACTIVITY' it is showing the those fields which i required...
how can i get these fields to data source...
in LO its like...we can select required field from extract sturcture right???
is there any procedure do same with CRM data sources...
thnaking you...
regards...
nithin
Message was edited by: nith l

Hi,
If the fields are available in ES but not available in DS , then we can Modify the table ROOSFIELD. But, I think, this is some what rude mothod.
Before doing this, It is better to Raise a OSS. They may come out with some SP upgradation.
Search this forum with ROOSFIELD.
With rgds,
Anil Kumar Sharma .P

Table of origin for a field in extract structure ??

Is there a way to look at the extract structure of a datasource and know the tables from which its pulling the data from ?
I know I can always get them from help.sap.com by going to datasources and can look at the table of origin for a particular field...
I was wondering if I can look at the same information on the system.
I appreciate your replies ..
Thanks,
Rishi.

Rishi,
we can know get the tables in different ways, the best way and easy way to search the tables is HELP.SAP.COM as you said. you can use communication structure, ST05, SM50.
All the best.
Regards,
Nagesh Ganisetti.

How can we assign Extract Structure of datasource to request to transport

Hi,
I was trying to transport datasource. But it ended with errors due to unavailability of extract structure. So plz guide me how I can assign Extract structure of datasource to request to transpport.
I tried to assign in RSA6 but here there is no option to extract structure to assing to request.

Hi,
Normally when you get the screen to select and hide the fileds and then save it, you will get the extract structure collected automaticaly in your TP request.
Hope it helps
Regards,
Srini

Regarding extract structures.

Similar Messages

Maybe you are looking for