Regarding extracting data from r/3 to BW 3.5 using CO-PA

Hi All,
I want to extract the following data from r/3 to bw3.5
General Ledger (GL)
Profit Center Accounting (PCA)
CO-PA
How to extract.please provide some steps in R/3 and BW.
Thanks
Vasu.

Hello!
These links are actually helpful and I thank you for them.
I need further help though on the step before all the steps mentioned here. Particularly, what is the step before RSA9 and RSA5 so that CO-PA can contain the quantity field that BW wants to see?
Currently, CO-PA account-based contains only the quantity field MEGBTR but they need MBGBTR as suggested in SAP note 438207.
However, when looking at RSA5 or even KEB0 the field MBGBTR does not exist under CO-PA account-based. Only MEGBTR exists in the list.
How do we add please MEGBTR in CO-PA? Or is this done in CO-PA or in BW only?
Thank you very much in advance.
Maria

Similar Messages

How to extract data from info cube into an internal table using ABAP code

HI
Can Anyone plz suggest me
How to extract data from info cube into an internal table using ABAP code like BAPI's or function modules.
Thankx in advance
regds
AJAY

HI Dinesh,
Thankq for ur reply
but i ahve already tried to use the function module.
When I try to Use the function module RSDRI_INFOPOV_READ
I get an information message "ERROR GENERATION TEST FRAME".
can U plz tell me what could be the problem
Bye
AJAY

Regarding Extracting Data from SAP CRM

Hi,
1) What are steps to extract data fron SAP CRM? I heared that we get different types of errors while extracting data from SAP CRm to BW when compared to BW
2) From which tables BW system is getting data when we extract data from SAP CRM Lead management, Opportunities, Activities and CIC?
Can anybody please let me know the answers for these ..........
Thanks in Advance,
Sowji
[email protected]

Hi Sowjanya,
Pls ch this link:
regarding bw crm extraction
CRM extraction
CRM Extraction
http://help.sap.com/saphelp_nw2004s/helpdata/en/be/92fb3b28904f73e10000000a114084/frameset.htm
http://help.sap.com/bp_biv335/BI_EN/html/BW/SalesAnalysis.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f2910623-0c01-0010-de8f-d1926988a986
http://help.sap.com/bp_biv135/html/bw.htm
http://help.sap.com/bp_biv135/html/BW/SalesAnalysis.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw04/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/index.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/af/ed833b2ab3ae0ee10000000a11402f/frameset.htm
http://help.sap.com/bp_biv235/BI_EN/html/BW/CRMAnalytics.htm
http://help.sap.com/saphelp_crm50/helpdata/en/1a/023d63b8387c4a8dfea6592f3a23a7/frameset.htm
Steps:
1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
2) Activate the Business Content DataSources (tcode RSA5).
Select/enter the application component and choose Execute (F8).
To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
All BW-Adapter metadata is considered when versions are compared:
Header information (Table SMOXHEAD)
Mapping information (Table SMOXRELP)
Global selection conditions (Table SMOXGSEL)
Attribute key fields (Table SMOXAFLD)
Datasources used in CRM-BW extraction are:
0crm_sales_act_1,
0BBP_STSMA_TEXT
0CRMFOCST_TEXT
0CRM_ACCPLN_ATTR
0CRM_ACCPLN_TEXT
0CRM_BILL_BLCK_TEXT
0CRM_CANC_PARTY_TEX
0CRM_CANRSN_TEXT
0CRM_CATEGORY_ATTR
0CRM_CATEGORY_TEXT
0CRM_CLASS_TEXT
0CRM_DECOTP_TEXT
0CRM_DECO_TEXT
0CRM_DIRECT_TXT
0CRM_ECROPT_TEXT
0CRM_FINCLASS_TEXT
0CRM_ITM_OBJ_TYPE_T
0CRM_ITM_TYPE_TEXT
0CRM_JRGUID_TEXT
0CRM_OBJ_TYPE_TEXT
0CRM_OPGUID_TEXT
There many more!
Check the datasources in rsa6 of crm system under CRM node. Documentation is available in SAP help.
*pls search SDN For more info*
*pls assign points if info is useful*
Regards
CSM reddy

Regarding extract data from r/3 to BW3.5

Hi,
Before i extracted data from flat file to BW.
Now i am extracting data from r/3 to bw.This is the first time to extract.
Please give steps to extract data from r/3 to bw using LO's and please give some directions for generic also.
Please do the needful for me.
Thanks

Hi,
<b>For LO:</b>
Refer this link:
http://www.sap-img.com/business/lo-cockpit-step-by-step.htm
Also refer to the weblogs by Roberto:
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
/people/sap.user72/blog/2005/04/19/logistic-cockpit-a-new-deal-overshadowed-by-the-old-fashioned-lis
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
other doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Bye
Dinesh

Extracting data from Oracle GL and importing to FDM using ERPI adapter

Hi,
I am also trying to use ERPI adapter to directly extract data from Oracle GL. I am not finding sufficient information on this. It would be great if anyone can help me in this.
I have one more doubt: Can we call the stored procedures in the FDM custom scripts, If so can I get the syntax of the script...I really don't have idea on this FDM part. I was working till now with the Flatfile input, But my client wants to make this change in the existing system. Accessing/Extracting data from Oracle GL. Experts who knows it can pls guide me.
I am using FDM 11.1.2 and ERPI associated with 11.1.2.
Thanks in Advance.
[email protected]

Hi,
Is it possible to execute the stored procedures in FDM. Currently we are extracting data from oracle GL using SQl procedures (constaller tool is user to create the inteface) and storing the required data in the intermediate table in oracle GL, From which we are extracting data into a flat file and then loading it to FDM.
So my question: is it possible to invoke the stored procedure from FDM scripts, If so can you pls let me know how to do that...
Thanks In Advance,
[email protected]

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

Extract data from domain-value range

Hi,
I have a requirement to extract data from Domain-Value range.
I am using MDM generic extractor(mdmgx)
in 'Maintain ports and check tables' i can create a port but i should mention a table name.
I have a 'DOMAIN'
with a specific value range:
01    text1
02   text2
03   text3
so on...
i need to get these entries as a part of extracted data.
Could you please tell me how to do this?
Thanks a lot in advance.
Regards,
Rashmi

Hey guys,
you're making things much to complicated. For extracting Domains with MDMGX, the TABLE NAME equals the DOMAIN NAME. Example for domain XFELD that is a common Yes/No Flag:
CLIENT            000
SYSTEM TYPE       R3
OBJECT TYPE       Vendor
MDM PORTCODE      LT_YesNoIndicator
TABLE NAME        XFELD
NONLANG FIELDS    KEY=Key
LANG FIELDS       LANGKEY=LANGKEY,VALUE=Name
WHERE CLAUSE
LINK INFO
FUNC XML
FUNC XSD
PROCESS LEVEL     0
TABLE NAME equals the domain name.
NONLANG FIELDS and LANG FIELDS use default entries as defined above.
If you check your system for "table" XFELD, you'll clearly see that it's a domain.
Cheers
Michael

Unable to extract data from an AS/400 system.

Hello experts.
We are trying to extract data from an AS/400 system but not having any success until now.
I´ll write down you the stepts that we have followed until now:
1.- Create a DB Connect between both systems
2.- Create a Source System from AS400 in the workbench under DB Connect Directory
3.- Generate datasources from tebles specified in the schema of the connection
break point -
At this point, we had a problem with some tables with at least one fieldname containing character "Ñ".
After asking some possible solutions to SAP, the told us this is not supported, as the system can´t have any object with character "Ñ", so the transfer structure was unable to activate with this fields in the datasource.
--- end of brek point --
4.- After those issues, we´ve decided to implement, in another schema, views from those tables which had the fieldnames with that character "Ñ", changing them to an "N".
5.- We´ve created another source system with that schema, and user than can see that schema.
6.- To be able to see those views, in transaction RSDBC, we had to deactivate the two checkboxes in the first window ( Choose tables and Choose views) .
7.- Right afeter, we could generate correctly the datasources from this logical tables.
8.- We have designed the hole dataflow for this datasources and everithing went rigth.
9.- But wen we tried to execute the infopackage to extract data from those logic tables, we cannot get any registers. Acctualy the charge remains yellow after the job have finished.
Please, I would appreciate any help you could give us on this problem.
Thank you very much
Regards
Joaquin

I´d like ti add something to this thread, and maybe clarify a littel bit the question.
The only way that the BW system recognizes those logical tables, through transaction RSDBC is checking out the two boxes on this transaction, "Select Tables" and "Select Views".
I don´t know haw these logical tables have been created, bus does this mean that the are not neither tables or views as BW understand them.
Please, if someone knows anythin about this, answer to this thread.
Thank you very much.
Joaquin Sobrido

Extracting data from Z-table from SAP R/3 to BW

Hi all
I want to extract data from a Z-table from SAP R/3 system to Bw system. Currently I am on BW 3.5. Since it is a Z table I dont have a standard extractor for it & I dont knw how to create it. Can anyone provide me with the step-by-step documentation of how to extract data from a non standard SAP table????

Hi
You need to create Generic Datasource on the Z-Table you want to get data from
Go to RSO2 transaction to create generic datasource .
You need to give technical name of datasource under datasource type you want and click on create. Then you can give descrption and Application component under which u want see the datasource,
enter the z table name under view/ table and save.
here you can click on check boxes to make fields hidden or selection fields.
Regards
Ravi
Edited by: Ravi Naalla on Aug 25, 2009 8:24 AM

How to extract data from multiple tables (always got errors)

Dear Experts,
I have a simple mapping to extract data from multiple tables as a source (A, B, C) to a target table (X). Below is the picture:
(Sources)....(Target)
A----------------***
B----------------X
C----------------***
Sample Source Data:
Table A:
ColA1
100
200
etc
Table B:
ColB1 ColB2 ColB3
10 Y Ten
20 Y Twenty
30 Y Thirty
etc
Table C:
ColC1 ColC2
11
12
13
etc
Target table (X) should be (just has 1 group INGRP1):
ColA1 ColB1 ColB3 ColC1
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
Scenarios:
1. Directly map from A, B, C to X. Unable to map with error message: "API8003: Connection target attribute group is already connected to an incompatible data source. Use a Joiner or Set operator to join the upstream data first before connecting it into this operator."
2. Map each source to Expression Operator and then map from each Expression to target table. I am able to map all attributes successfully but got error when validating it with message: "VLD-1104: Attributes flowing into TEST.EXPR_SRC.INGRP1 have different data sources."
How can I achieve the correct mapping for this purpose?
Use Joiner? I have no key to join the sources
Use Set? The sources have different number of columns
Thanks in advance
Prat

Thanks Nico,
I think it will results data like this:
100 10 Ten 11
200 20 Twenty 12
300 30 Thirty 13
etc
and not the expected:
100 10 Ten 11
100 10 Ten 12
100 20 Twenty 21
etc
But it inspired me to solve this by adding key expression in each source table (B & C) to be joined to table A with this formula:
100+TRUNC(INGRP1.COLB1,-2)
Regards
Prat

How to extract data from the fields present in two or three tables

Hi Experts,
I have a scenario where i have to extract data from the fields of different tables. e.g. let there 2 tables which have some number of fields . I want the data of 3 fields each from these 2 tables. How can i get that??
Sam

Hi
You can create view in tcode se11..
here you include all tables from which you want to fetch the data..
you need to give selection condition here
eg..
say select empname from table A, select empadd from table B.. where empno(from A)=empno(from B)
(note that you dont need to write queries like this.. i have just given u the example)
After creating the view you can create datasource in RSO2..
Regards
Swati

How to extract data from 12 tables ?

Hi experts,
I want to extract data from 12 tables into bi.
How can we do this. And also can we extract some fields from
a structure?
Full points will be assigned.
Regards,
V N.

Hi,
First you need to check if the tables are standard tables or custom tables. If they are standard tables check which extractors are using those tables.
If they are not being used by any of the standard extractors then you you need to create generic datasource for the same. The same hold true for custom tables as well. For custom tables, you'll need to create generic datasource. If you search the forum for generic datasources you'll get a lot of information.
Its very important that you understand the table relationships, data volumes, if delta is possible or not, data granularity, etc for your datasource design.
Cheers,
Kedar

How to extract data from planning book

nu t apo. need help regarding how to extract data from planning book givn the planning book name , view name & some key figures.
Total Demand (Key Figure DMDTO):
o     Forecast
o     Sales Order
o     Distribution Demand (Planned)
o     Distribution Demand (Confirmed)
o     Distribution Demand (TLB-Confirmed)
o     Dependent Demand
Total Receipts (Key Figure RECTO):
o     Distribution Receipt (Planned)
o     Distribution Receipt (Confirmed)
o     Distribution Receipt (TLB-Confirmed)
o     In-Transit
o     Production (Planned)
o     Production (Confirmed)
o     Manufacture of Co-Products
Stock on Hand (Key Figure STOCK):
o     Stock on Hand (Excluding Blocked stock)
o     Stock on Hand (Including Blocked stock)
In-Transit Inventory (Cross-company stock transfers)
Work-in-progress (Planned orders / Process orders with start date in one period and finish date in another period)
Production (Planned), Production (Confirmed) and Distribution Receipt elements need to be converted based on Goods Receipt date for projected inventory calculation.

Hello Debadrita,
Function Module BAPI_PBSRVAPS_GETDETAIL2 or BAPI_PBSRVAPS_GETDETAIL can help you.
For BAPI BAPI_PBSRVAPS_GETDETAIL, the parameters are:
1) PLANNINGBOOK - the name of your planning book
2) DATA_VIEW - name of your data view
3) KEY_FIGURE_SELECTION - list of key figures you want to read
4) SELECTION - selection parameters which describe the attributes of the data you want to read (e.g. the category or brand). This is basically a list of characteristics and characteristic values.
BAPI_PBSRVAPS_GETDETAIL2 is very similar to BAPI_PBSRVAPS_GETDETAI but is only available from SCM 4.1 onwards.
For the complete list of parameters, you can go to transaction SE37, enter the function module names above and check out the documentation.
Please post again if you have questions.
Hope this helps.

How to extract data from structures or create a datasource using structures

Hello Friends , I have a requirement to extract data from ECC fields, but when i go look the table i found only "structures" REBD_CONTRACT_REL_L and i confirmed with ecc team that there are no table available with these fields so how do i now extract the data in BI using the fields in ecc that exist only in these Structures.
Please help me to resolve this
Thanks
Regards
Soniya

check tables
VIOBOV
(VIBDPLANOCC certainly not)
VICNCN table of the contrat
VIOROF table of the offers
VIBDOBJASS affectation of objects.
VICAINTRENO Affectation INTRENO / OBJNR / IMKEY
that will be a good start but ask again your functional persons.
If you want to upload data to BI you have to know the tables
bye
by the way a structure do not hold data.

How to extract data from generic view and function module

hi experts,
can anybody give me the steps to extract data from generic view and functon modules.
thanks and regards
venkat

https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33
https://websmp103.sap-ag.de/~sapidb/011000358700007535452002
Hope it Helps
Chetan
@CP..

Regarding extracting data from r/3 to BW 3.5 using CO-PA

Similar Messages

Maybe you are looking for