Regarding FAQ
HI Experts
Plz help Interview questions Regarding WAD,BPS and APD??
Tnks&Reg
Sudha
Gita / Sudha ,
Did you check the forums for the same ...? a lot of such questions are posted already .. please go through the same and then if you have any specific questions you could not locate , we would be only too glad to be of help.. The question you have asked is too generic and is more of a summarization of the whole forum...
My 0.02
Arun
P.S Is it Gita or Sudha ????
Similar Messages
-
hi can any one send me some doc's and possible interview questions on SD , Urgent plz help me.here is my mail id:
[email protected],HI Chandra
1: What is the Purpose of a Sales Organization in SAP ?
Sales org. represents the highest elements in SD. Sales org. is responsible for
Sales, services, negotiation or Revenue generation and physical distribution of products.
2. What is the purpose of Distribution Channel?
The Mechanism or route through which the products are placed in the market.
3: What is the purpose of Division ?
Division is the one which sells identical or similar products.
4: Where do you configure Division in IMG?
Img-enterprise structure-- logistics general--- define division
5. A Sales organization can be assigned to more than one Company code. State true or false?
False. Sales org. cannot be assigned to more than one company code.
6. Can you create a Sales Order without having a Sales Group defined in the Org Structure?
NO. We cannot create a sales order without having sales group.
7. Sales Area is the combination of?
Sales area is the combination of
Sales org. + Distribution channel + Division.
8. Can you assign one plant to more than one Sales Organization?
Yes, we can assign plant to more than one sales org.
Area 2 : SD Business Process :
1. Explain process of stock transport orders in SAP?
Stock transport is the process of transporting stock within the plant
From one storage location to another. Stock transport is a replishment
Delivery.
2. What is a Scheduling Agreement ? Give a business case where it is used?
It is the agreement between customer and company. It contain delivery
Schedule.
3. Can you check availability during Standard SAP Quotation Process?
Yes, we can check for availability during std. quotation process.
4. What are movement types used for GI to customer, for Consignment sales process, returns process. How does the inventory move in each case?
The movement types are:
631,632,633,634.
5. How is billing date determined in the billing document?
Once the PGI is done, the goods are send to the customer on the
Specific delivery date, from this the billing date is determined.
6. How are posting to account done by the system, explain what is credited and what is debited when customer billing passed to accounts?
Through revenue account determination.
7. What are the different billing types available in standard system?
A) Periodic billing
B) Milestone billing
Area 3 : SD Configuration :
What fields Determines Pricing Procedure? What are the columns in a pricing procedure? Relevance of each?
The following fields determine the pricing procedure. Ane the columns are as follows.There are total 16 fields which determine the pricing procedure.
1) Step
2) Counter type
3) Condition type
4) Description
5) From
6) To
7) Manual
8) Mandatory
9) Statistical
10) Print out
11) Sub to
12) Requirement
13) Alternation calculation type
14) Alternation condition based value
15) Account keys
16) Accurals.
2: What fields Determine Shipping Point ?
Shipping point is determined from the plant + shipping condition from customer master + Loading group from Material master.
3. If Same Purchase Order no is used in multiple Sales Orders, Is it possible to warn the User? If yes How?
The same purchase order no. is entered system throw a warning message.
4: Which Item Category in Standard SAP is used for Free of Charge items & Text Items ?
TANN. TXT.
5: What determines whether a document can be copied to another document ? For Example A Quotation to Another Quotation , or Inquiry to Quotation.?
Copy control
6: Is it Possible to copy Sales Order to a Production Order ? If yes explain in which situation you can do that /
Make to order scenario is possible
7. Where are the controls for Availability check in the system?
Avb. Check with ATp logic
Availability Check with ATP Logic or Against Planning
1. define checking group
2. carryout control for avb. Check
Availability check against production allocation
Area 4: Integration with Other Modules :
1: How do you release a Sales Order blocked for Credit Hold. ?
Go to T-code VKM3 and give the sales document no. to release the sales order
From credit hold.
2: What is the transaction code for Stock Requirements List ?
MD04
3. How do you create Sales BOM, What is the purpose of Sales BOM ?
Go to cs01 to create sales bom. Sales bom is to explode the sub items in the
Sales oreder alongwith the main item
4 : What movement type is used ?
a) To receive initial inventory into Stock- 561
b) Movement type used for issuing stock to customer against Delivery- 601
5 When does the invoice (billing document) status change ?
When the invoice is released for posting to account the status of invoice changes.
Area 5: SD Master Data :
1: What is the structure of a customer master record?
Following is the structure of customer master record
General data
Company code data
Sales area data
2: Account group Determines:
a) Fields
b) Partner functions
c) Procedure
3 Which of the following are true with respect to customer hierarchy/
2) true
4: Changes to the account group and the accompanying partner functions can only be made from a lower level to a higher level. True or False.?
False
5: Name any 4 Material types in SAP R3?
a) hawa-trading goods
b) fert- finished goods
c) roh-raw material
d) halb- semi finished goods
7: The plant can be automatically proposed by the system when processing a sales order, if it has been maintained in one of the master records. Mention which of the master records?
a) Customer mtl. Information record
b) Customer master- ship to party
c) Material mater
8: Which other areas in SAP SD is condition technique used?
a) output determination
b)material determination
c)Reveneue account determination
d) text determination
9. How is pricing procedure determined in a Sales Document?
Sales area + Cust. Pri. Pro + Doc. Pri. Proc
10: Is Credit block for a Sale order at Header or Item level?
Header level
Area 6: SD Transaction Data :
1: Explain the Flow of Sales Process in SAP Terminology ?
1) Inquire
2) Quotation
3) Sales order
4) Delivery
5) Billing
2: What are the three types of availability checks?
3: Can you combine multiple Sales Orders into one delivery? If Yes How?
Yes. When it has the same ship to party , shipping point and incoterms
3. How do you create a Delivery for Purchase Order ? Explain
VL10G is used for creating delivery for purchase order.
4 What is a Proforma Invoice ? When can this document be created ?
It is not posted to the accounting. It is a doc. It is used for legal purpose
5 What are third party processes, What are the item categories used?
Vendor supplies the material to the customer when the mtl,. Doesnot
Have stock in the company. Item catergories is TAS
6: List out any 5 controlls in an Item cateory in SD.
a) item type
b)completion rule
c)special stock
d)relevance for billing
e) returns
7. How are schedule line categories determined in Sales orders?
Item catergory + MRP type
8: List out the tables for :
a) Sales orders: vbak,vbap,vbep
b) Deliveries documents:likp,lips
c) Billing documents: vbrk,vbrp
d) Pricing master data
e) Pricing transaction data
1. What is stock transfer? How it is different from sales ?
In a stock transfer procedure, materials or goods are transported from
one storage location of the same plant to another storage location.
Stock transfer is an Replenishment delivery.
Sales allows you to execute different business transactions based on sales documents defined in the system. Sales is an outbound delivery.
2. What is an sales return, what are business process involved ?
Sales Returns is used to manage full products that the customer has returned due to complaints.
The business process involved are:
1. Document Types for Sales Returns
2. Analysis Key
3. Additional Analysis Keys
4. Refunding key
5. Assign Analysis Key to Item Categories
6. Field Assignment Order material movement
7. Recipient for Express Mail from Background Processing
8. Filling Facilities
9. Contents
10. Keg lock.
3. What is credit memo and debit memo?
The term credit memo always refers to a credit memo from the vendor. Therefore, posting a credit memo always leads to a debit posting to the vendor account. As in the case of invoices, credit memos can refer to purchase orders or goods receipts.
A debit memo request is a sales document used in complaints processing to request debit for a customer. A debit memo request starts the billing process.
4. What are the different types of sales process in a typical organization ?
The different types of sales process are:
A) Inquiry
B) Quotation
C) Sales order
D) Delivery
E) Billing
F) Rush order
G) Cash sales
5. What is invoice and what information does it contain ?
A formal request for payment; a written record of a transaction submitted to customer or client when requesting payment for services or goods delivered; includes taxes where applicable; also called bill, and sometimes statement, though the term "statement" has a different meaning that does not include a formal request for payment.
Invoice is a statement which contains the under mentioned details compulsorily.
1. Invoice Numner
2. Invoice date
3. Name and address of the person making the invoice ( Seller of goods and service)
4. Name and address of the person to whom invoice is made. ( Buyer of goods and service)
5. Description of goods / services involved
6. Applicable rates and taxes with percentages
7. Rate of the goods / services
8. Quantity of the goods and services
9. Quality or any other specifications
10. Price / Value of the goods and services
11. Invoice must be signed by the person making it
12. Terms and conditions of making the payment
6. What is credit management?
Credit management enables you to monitor, evaluate and control credit situations and credit allocations. The integration of current information from FI and the simultaneous access to the credit and sales information system provide a broad information basis for evaluating critical credit situations and credit allocation.
Credit management includes the following functions:
Carrying out credit checks according to different criteria and at different points in time
Automatic notification of the responsible employees in critical credit situations by means of an interface to the mail system and therefore rapid processing of urgent credit problems
Support in critical credit situations concerning credit allocation by means of an interface to the Sales Information System and FI
Allocation of different authorizations to credit representatives according to certain criteria (for example, authorizations according to the level of the credit limit used or according to document value classes)
Monitoring credit allocation (for example, by creating overview lists)
7. What is consignment sale ?
Instead of making direct sales, individuals and businesses often place goods
with others who make sales for them. Those transactions are commonly
called consignment sale.
8. What is exice duty and how it is different from sales tax ?
Excise duties are duties that the state imposes as taxes on the use or consumption of certain goods. The liability to pay taxes is incurred when taxable goods are moved under customs seal from a location to a taxable location.
The state imposes excise duties, for example, on petroleum products, tobacco, alcohol and alcoholic beverages.
Tax based on a percentage of the selling price of goods and services. State and local governments assess sales tax and decide what percentage to charge. The retail buyer pays the sales tax to the retailer, who passes it on to the sales tax collection agency of the government
9. What is rebate ?
Rebates, widely known as refunds, are a popular tool used by businesses to promote their products and services. Rebates are distinct from coupons and other forms of discounting in that they reimburse a customer for part of the purchase price following, rather than at the time of, the sale. By offering
consumers cash back on the purchase price, rebates provide an incentive to buy a particular product.
10. What is promotion or scheme ?
A promotion might be a short-term price reduction, contest or sweepstakes, package giveaway, or free sample offer. Promotion is one of the four Ps of marketingprice, product, place, and promotion. Promotion is generally thought of as a sequence of activities designed to inform and convince individuals to purchase a product, subscribe to a belief, or support a cause.
11. How is sales and accounting are interrelated?
Revenue Account determination is a link between FI and SD. When company is selling, there are some revenues and expenditure, for example
sales revenue is the revenue company is getting and discounts, rebates, taxes, freights etc company is incurring expenditure. So we have to update Accounting documents when we are selling our products.
In Revenue account determination when we save the billing document the sales values in the billing document will be automatically posted to the corresponding GL Accounts. for this go to VKOA assign GL Accounts.
12. What is order management?
Systems that receive customer order information and inventory availability from the warehouse management system and then groups orders by customer and priority, allocates inventory by warehouse site, and establishes delivery dates.
13. Can anybody tell me what the exact meaning of inbound delivery?
Inbound delivery does not necessarily mean goods receipt. INBOUND DELIVERY in SAP pertains to all incoming goods, which may refer to either a vendor delivery or a return of a rejected delivery to a customer. It may cover the schedules of deliveries from your vendors/suppliers or even a rejected delivery to a customer.
The GOODS RECEIPT portion pertains to the time that you are in the process of receiving the goods (either as a delivery or as a return item). Hence, movement type would vary.
What is an Invoice? How many types of invoices are there in AP and AR?
An invoice is a Document created whenever a product or service are sold. And if the sale is made on credit the invoice remains open in the Receivables Module until the Funds for it are received. And once the Funds are received the invoice is closed with the receipt.
There are 8 types of Invoices in AP: Standard, Credit Memo, Debit Memo, Prepayment, Withholding Tax, Mixed Invoice, Expense Report, PO default and Quick Match.
Here area 7 types of Invoice in AR: Invoice, Credit Memo, Debit Memo, Chargeback, Deposit, Guarantee and adjustment.
Types of Invoices are:
Standard
Credit Memo
Debit Memo
Expenses Report
Prepayment
Mixed
AWT (Automatic Withholding Tax Invoice)
Interest Invoice
PO Default
Quick Match
Recurring Invoice
Arrears Invoice
Advance Invoice
What is a recurring invoice?
Recurring Invoices are the invoices in which the payment falls on every month, such as rent, electricity etc.
What id recurring invoices? What are AP setup steps?
Recurring Entries are of 3 types
1. Standard, 2. Skeleton 3.Fornulae Based
In GL Module
1. Define Formula Batch (Eg: ABC Rent batch)
2. Enter Lines (Here u have both Debit as well as Credit lines)
3. Generate Recurring period
4. Review Journal Batch
5. Post the batch
1. Standard Recurring Journal: It is used for same accounts & same amounts
Eg: Utilities Dr
Cash Cr
2. Skeleton Recurring Journal: It is used for same accounts but for different amounts
Eg: Recurring Fee Dr
Cash Cr
3. Formule Based Journal: It is used for different accounts with different amounts
Eg: Salaries Dr
Cash Cr
What is meant by Explosion in SD?
It is related to Bill Of Material where one parent item is linked with several child items. For creation/edit/display, T-Code is CS01/02/03
What is the usage of configuration nprofile in variant configuration ?
Configuration profile is a place where we will configure configurable material (mmk1) with class type 300 and class which u have defined. here the values of variant characteristics will be stored.
What do you mean by tickets? Could you plz give me some examples of tickets?
Tickets are Problems/errors which customer/client gets at the time of using. A ticket is Problems/errors which customer/client gets at the time of using.
What is the difference between sales process and business process?
Business process defines way of defining your business needs, which includes
What type of business you are carrying out.
Production scenario to planning for production, storage and dispatching with sales requirements to selling terms.
Sales process is part of your defined process, how you do business with customers.(categorization of customers to discount to rebate)
What is the difference between transit time and transportation time ?
Transit time: time taken by the material to reach customers place.
Transportation time: time taken to schedule the materials by shipping company.
What is the difference between free goods and bonus buy?
Free goods are either inclusive or exclusive if a customer orders for 10 products he will get 1 free for that no price is charged this is exclusive scenario.
If a customer orders 10 products he will get 9+1 for 1 product he will not charged this inclusive scenario bonus buy refers to any product manufactured or otherwise made available for purchase at a lower cost for a certain period of time. A bonus buy can relate to food, cars, stocks, bonds, insurance, bank loans or almost any product you can think of.
Examples of Bonus buys are: buy one and get one free, 20% original price, 15% Reduced Mortgage today.
What is the difference between static and dynamic in credit management?
Static check: if you go for static check to determine credits the system considers all those open orders that are due for delivery i.e. before and after credit horizon date.
Dynamic check: if you go for dynamic check to determine credits the system ignores all those open orders that are due for delivery after the credit horizon date.
Where is rebate defined for quantity REBATE?
In rebate agreement details we will define the rebate basis whether it is the quantity rebate or volume based rebate.
What is solution manager? what is purpose of it? in support what type of tool we can use? What is change request? How can we maintain? Which will come first.Task? Or request?
Solution manager is a type of document on which we paste all our documents created at the time of blue print stage like other word documents which we normally create while preparing roadmap. But its mainly used in other countries of world, its not so popular in India.
The tool we use in Support can be CITRIX where we will use icon Synergy.
When we create any user exits there we find change request. This is created to enhance anything required by client so before starting the process system asks for it. What so ever changes we do are Tasks. Task is inside Request. While releasing it we first release task then request is completed.
what is the difference between rebate and discount?
Rebate is a partial repayment, whereas a refund is a repayment of the total purchase price
Discount is reduction in Price
Can you able to delete the company code data in customer master data?
We cant delete Company code from the customer master as each customer belongs to one Sales area which in turn related with company code it is mandatory to have company Code date in customer master
What is the tool used in sap SD support to communicate with the user for handling the tickets?
CITRIX is the tool to access client's enviornment.Under CITRIX u can find an icon called SYNERGY ( in synergy u can check your tickets.
Explain condition records in pricing?
To put it more simply....a condition record is nothing but the price of a product.
What is the difference between ATP check and availability check how these reflect in sales order (which check system considers) what are the IMG settings for the same?
ATP Check is checking of availably quantities i.e. ATP = Total Warehouse Stock + Planned receipts (Incoming Stock) - Planned Issues (Out going stock)
Availability Check is an integral part of business process it determines the desire deliverable quantity can be met on requested delivery date or not. Then it passes to Material Requirement Planning.
How to configure partial deliveries?
You can configure the system for partial deliveries in two places
1. In Customer-material info.
2. Customer Master.
If you allow the system for partial deliveries there. Then you can change Partial to complete delivery in sales order.
What is the control parameter in setting item category?
1. Doc type.
2. Item category group of material master.
3. Item category of higher level Item.
4. Item Usage
Item category can be determined by item category group +document type + higher itemcatagory group + usages
What is availability check, how to configuration of it?
When we create a sales order, there are several basic functions which are executed automatically for the dynamic order management. Among these basic functions, availability check and transfer of requirements are crucial.
the system first prepares schedule line containing the information on the desired delivery date and quantities , this information is passed to MRP and an availability check and transfer of requirements are executed
First the system carries out backward scheduling and establishes the material availability date = desired delivery date-transit time-loading time-picking & packing time and on this date an availability check is carried out using ATP logic which means available to promise quantity =total ware house stock + incoming orders-outgoing
Along with the availability check the requirements also are transferred to MRP.
the configuration involves following
1. Switching on at schedule line castigatory the availability check and TOR
2. configure the availability check using ATP and using the checking group and Checking rule
Reward if useful to u -
Hi All
Can any one tell me , when we create a new request the system generates the system define request no. but can any way we change the no. to the user define or can we set in the no. in the system from where the new requet no. will be generated.
Please help me.Hi,
As far as i know it's not possible.. nope..
Check the below links its regarding FAQ on transports... but u r requirement is not possible.
http://www.sap-basis-abap.com/sapbs008.htm
-Srini -
[KB Proposed Article]Does Mobile Firefox run on my device?
Shouldn't we have a KB regarding FAQ's, like will this run on Blackberry?
[https://wiki.mozilla.org/Mobile/Platforms]
or
http://www.mozilla.com/en-US/mobile/platforms/
Or is there a way to make Stickies in this type of Forum, like the one at the top?Yes, we really should. That seems to be one of the most frequent questions here.
mtz1of4, would you like to take a stab at drafting an article for it? -
HI please send faq's regarding to only BAPI & BADI?
please send faq's regarding to only BAPI & BADI?
if possible with answers as soon as possible.hi,
Check out following links
[http://www.erpgenie.com/faq/abap.htm]
[http://www.erpgenie.com/sap/abap/bapi/index.htm]
[http://www.sapdomain.com]
There are many more
Reward if useful.
Thanks
Madhura -
Hello friends,
Please refer me the java FAQ book which is latest and its writer also so that I can prepare interview questions as per industry standards....!
Your help can make my career better.....
Have a nice day.
Thanks and regards.....
Satyanand Verma
Noida, India.Hai,
Check the below link.....
Re: Installation Requirements for WAS - Java Stack
Regards,
Yoganand.V -
Send faqs regarding Adobe Forms? please
please send any useful information on ADOBE FORMS FAQS
Hi,
look at the Adobe page here in SDN:
https://www.sdn.sap.com/sdn/developerareas/was.sdn?page=AdobeForms.htm
Check these links on Adobe forms
http://help.sap.com/saphelp_nw04/helpdata/en/1e/05853ff8ec2c17e10000000a114084/content.htm
https://www.sdn.sap.com/irj/sdn/interactiveforms
http://www.sap.com/solutions/solutionextensions/pdf/BWP_Interactive_Forms_Adobe.pdf
It contains lots of useful information, documentation, and e-learning materials teaching you the basics.
chk these links:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d4fe7fca-0b01-0010-569a-9a9c1ddf4132
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/7c3bc67e-0c01-0010-dbb3-908315896909 [original link is broken] [original link is broken]
/people/vani.krishnamoorthy/blog/2006/05/17/fillable-adobe-forms-using-abap
Regards,
Satish -
Creative Cloud and existing Business Catalyst partners - FAQ
This FAQ will cover topics related to Creative Cloud, for existing Business Catalyst users.
How can I signup for Creative Cloud?
Your Business Catalyst account should have been already updated right now with your Adobe ID. If you haven’t updated it yet, visit the Adobe ID – Business Catalyst account update FAQ.
What benefits do I get with Creative Cloud ?
In addition to acccess to all Creative Suite programs, Lightroom and others in one place, a Creative Cloud membership enables you to host up to five Business Catalyst websites. These sites will be webBasics sites. For a full comparison between plans, see this page. If you purchase Muse or Dreamweaver as individual products in Creative Cloud, you can host one Business Catalyst website for each of them.
My web design shop has several employees, each with their own Business Catalyst login with access our Partner Portal. Do we need Adobe IDs for each of our employees?
Yes. Since these users are partner users, they need to use an Adobe ID. Visit the Adobe ID – Business Catalyst account update FAQ for more details
I have a paid website that I want to host using my Creative Cloud subscription. Can I do this?
This is not possible. You need to create a new webBasics temporary website in Business Catalyst and push it live.
Can I move a trial/live Creative Cloud site under a different Creative Cloud subscription?
This is not possible right now.
Do I get any discount if I upgrade a Creative Cloud website to a higher Business Catalyst plan such as webMarketing or webCommerce?
Currently there are no upgrade discounts for Creative Cloud members.
What are the limitations of the webBasics websites that come with Business Catalyst and Creative Cloud membership?
You will be limited to 100 MB of storage and 1 additional user (such as your customer). You will not get email, SMS or newsletters for this web plan.
Can I buy more users? Can I buy more space? Can I buy email?
We are working on creating this workflow but at this point we don’t have an exact release date for this feature.
How can I upgrade the webBasics websites that come with Creative Cloud to a higher Business Catalyst plan?
We are working on creating this workflow but at this point we don’t have an exact release date for this feature.
Do I get any discount for purchasing more websites if I am a Creative Cloud subscriber?
Right now there is no discount for Creative Cloud members.
If I am an existing Paid Partner and I have a few employees for whom I paid Creative Cloud subscriptions, how many websites can I claim?
You will have 5 websites for each employee. However, you will pay different licenses for all of them. Before purchasing these licenses, please contact Adobe Support to add these users to your partner portal. After you have added users to your partner portal, you will be able to access all the websites from it.
*NOTE: If you have already add employees to your partner portal, then everything will work automatically.
If you don’t want to access all your websites from the same Partner Portal, you don’t have to do anything.
How can I set permissions for my employees regarding these websites? What permissions can I set?
This will be part of a later Creative Cloud that will be launched this year.
What happens if I cancel or stop paying my Creative Cloud subscription?
Each live website (among the free websites under your Creative Cloud subscription) will stay live for an additional 30 days. This gives you time to decide whether you want to keep the site(s) live or remove them. You will be prompted to upgrade your website to a regular Business Catalyst site plan.
After 30 days, your website will enter in temporary mode. When entering the temporary mode, your custom domain name will be removed from the website. In order to reactivate it, pay for your website directly with Business Catalyst.
If you are inactive on a temporary website, it will automatically be deleted.
=== Dreamweaver CS6 FAQ ===
I have logged in on Dreamweaver CS6 and I cannot see my partner site. How can I edit it?
This is a known issue. For paid partners (Standard or Premium) you can use the workaround described below:
export one of your sites as an .ste file
Open the .ste file in another text editor, and modify it
Replace the :
httpaddress with your partner's site URL address
secureURL with your partner site secure URL
siteid with the site ID of your partner site
Save the .ste file with another name
Import this .ste file into Dreamwaver, choose a local root folder
Please take a look at Brad's blog post here for more detailed steps on how to import your partner site in Dreamweaver.
I'm trying to login to Dreamweaver CS6 with my Business Catalyst credentials, and it doesn't work. What credentials do I need?
You can login to Dreamweaver CS6 with your Adobe ID. If you haven't merged your BC account with an Adobe ID account, you'll need to merge it and then you should be able to login.
How do I access sites in Dreamweaver with an Adobe ID other than the one linked to my Creative Cloud or Dreamweaver subscription?
Dreamweaver defaults to using the Adobe ID from your subscription to avoid the inconvenience of logging in multiple times. To use a different ID, just click the "Logout" button in the lower-right hand corner of the Business Catalyst panel and log in with a different Adobe ID:
You'll need to have a file open in an existing BC site for the "Logout" button to be visible. Logging out will not affect the Adobe ID used in conjunction with your Dreamweaver subscription. To change the Adobe ID for your subscription, click Help -> Deactivate.At this point the upgrade workflow is not functional just yet, as mentioned here: http://forums.adobe.com/docs/DOC-2153
So the webBasics Creative Cloud cannot be upgraded directly to the webBasics+ level for now.
But a workaround for this case would be to re-publish your Dreamweaver/Muse project (I suppose you've used one of these solutions to build the site in the first place, right?) in a new trial/temporary site -> let us know what is the URL of that site (don't push it live) -> we will change the site plan from our backend to webBasics+ -> you will be able to publish it using the webBasics+ site plan.
Please note that this is going to be a separate charge, besides your Creative Cloud subscription. The monthly fee for webBasics+ will be $12.21/month, as mentioned here: http://www.adobe.com/products/business-catalyst/buying-guide-subscriptions.html
Another way to use the webBasics+ plan would be to simply trigger a new trial site here: https://syd.worldsecuresystems.com/PartnerPortal/FreeTrialSignup.aspx#splash with the same Adobe ID as the one used to buy the Creative Cloud subscription and take that site live separately. -
Hi Guys,
I am having an interview tmmorrow in Abap Objects.
Could any one help me in sending me the Faq's ASAp.
Thanks in advanceHi,
If you do a media search on ABAP Objects you will find:
1)Eight Reasons Why Every ABAP Developer Should Give ABAP Objects a Second Look by Horst Keller
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/37c5db90-0201-0010-3a9b-d0a5288f3c15
2) Questions: Why use ABAP Objects
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3e59b790-0201-0010-88aa-bc8a7f95f6fb
3) Why use ABAP Objects Exercise
https://sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/3412d190-0201-0010-aaaa-ff5a315ae5fe
4) ABAP Objects for Java Developers:
https://media.sdn.sap.com/public/eclasses/teched04/ABAP151_files/Default.htm#nopreload=1
There is also an excellent class offered by SAP Education called BC401 that describes Objects and BADIs in exruciating detai ;-).
http://www8.sap.com/useducation/curriculum/course.asp?rid=276&cid=60167031
Check the links -
Re: Need FAQ's
The specified item was not found.
Regards,
Priyanka. -
PS CS2 won't open due to error message regarding RAM...
I've been running Photoshop CS2 since it came out and never had any real problems. Then the other night I loaded approx 20 custom shape files that had about 10 shapes each from ActionFx. I played with them for a while and everything was working fine. Then I shut my computer down that night. The next morning I tried to open Photoshop and got the following message "could not complete your request because there is not enough memory (RAM).
I've tried everything I can think of to fix this so I'm pretty desperate for help. Finally, I resorted to uninstalling just the Photoshop component of CS2. Then I defragged and reinstalled. When that didn't work I uninstalled all of CS2 including my preferences. Defragged again and then reinstalled. All of the other components open and work (Illustrator, GoLive, InDesign, etc.) but Photoshop is still a no go
Something I found really strange is that while the error message is up on the screen I can still see all my layer styles and actions (even though I've uninstalled everything twice now). Of course, as soon as I click ok on the error message everything closes and Windows says "Adobe Photoshop CS2 has stopped working. A problem caused the program to stop working correctly. Windows will close the problem and notify you if a solution is available." Needless to say no solution is ever offered.
Here's my system:
Dell Laptop running Windows Vista Ultimate
Memory (RAM): 4 GB
Hard Drives:
C (1 actual hard drive): 149 GB Free: 103 GB
D & E (1 hard drive partitioned):
D: 135 GB Free: 40.6 GB
E: 13.2 GB Free: 12.6 GB
System type: 32-bit Operating System
Video Card: NVIDIA GeForce 8600M GT
Sorry for the long post. Any help will be deeply appreciated!!!Thank you for replying John.
1. I realize not on Vista at the beginning. I'm sorry, I thought this was obvious. Since the problem I'm having is a recent issue, I only thought listing my current system would be important (I've had this system since 2007).
2. Tried using the Alt, Control, and Shift method but nothing happened. Went to where the FAQ said the preferences file would be and there isn't a preferences file there. Did a search for it on my whole system (just to be sure) and found nothing. Having done all of that I'm assuming the file has been deleted... If there is anywhere else I should look I would really appreciate a heads up. I am at a complete loss as to what to do next besides upgrade (which I can't afford) so that I can work.
I am not a computer person by any means. Everything I have learned regarding computers has been through a few classes and lots and lots of reading books on my own. I was starting to feel pretty decent about myself & computers (I guess that'll teach me).
As I stated before, this whole issue started after installing several shapes. I've gone to Program Files/Adobe/Adobe Photoshop CS2/Presets to try and delete the shapes but there is nothing there but the orig. Adobe presets. The same goes for the rest of the preset files. None of the Layer Styles, Actions, etc. show up. Is there anywhere else I should look?
Thank you again John for replying earlier.
I can't complete any of my work until this issue is resolved so again, any help will be greatly appreciated!!!
I don't understand why the spaces between the paragraphs keeps going away...sorry if it's hard to read. -
NEO Boards Unofficial FAQ rev 4/05/2004 - two lights on "P" series
Hi all,
I'll start maintaining this Unofficial FAQ for the NEO boards. The contents of this FAQ are compiled from this forum, user's posted problems, usage issues, compatibility issues reported on the net etc. However, MSI does not responsible for the validity of this FAQ. Please take note.
1. BIOS
Q: I flashed the BIOS and caused my motherboard dead. Can I RMA the board?
A: This does not happen easily. Please be sure you follow the BIOS flashing instruction and wait for the BIOS flashing process to be fully completed before you restart the PC.
If this problem is caused by the recent bios 1.3 for the Intel875 ( MS6758 ) chipset, then he could ask for RMA from MSI Branch offices for Free.
If not caused by the 1.3 BIOS, they can still go through the normal RMA process. Please check with MSI branches.
Q: What is the MSI statement for the bad BIOS flash?
YES. This is the statement :Quote
When you update the bios to v1.4 using the latest flash utility, it will show "Erasing Done and then Programming Done". But actually the process has not been finished yet, you will need to wait about 30 seconds and then the message of "Flash Complete..." is showing up, this will complete the flash process.
By doing this, end user will assume when it display "Programming Done" message, it has complete the flash process which is wrong. We need to wait until the "Flash Complete..." message has displayed on the screen in order for completing the flash process.
By any chance we can remove the message of "Programming Done" and only prompt for "Flash Complete..." so customer will not turn off the system or reboot the system when they see "Programming Done" message pop on the screen?
The new version ADSFI708.EXE has fixed this issue. When you finish the BIOS , it will show the "Verifying the ROM data now" message before it showed up the "Flash Complete".
In short, use ADSFI708.EXE to flash the BIOS.
[/color]
Q: Where can I get beta BIOS?
MSI do not support beta BIOS. Use at your own risk. Under special condition such as hardware incompatibility issues and a beta BIOS is a feasible resolution, please post in the forum and let the mods arrange for you.
Latest BIOS:
Released:
875P Neo : 1.9
865PE Neo2 : 1.9
865PE Neo2-PS : 3.3 New![/B]
beta BIOS:
875P Neo : 1.9B6 link1 [Thanks to FlyTSI for hosting]
History: NO INFO PROVIDED FOR 1.9B6
865PE Neo2 : 2.01B link [thanks to FlyTSI]
History:Support Extreme OSB logo. Display L3 cache. Support Prescott cpu & update microcode. Modify Prescott ratio programming.
DO NOT APPROACH THE MODS FOR BETA BIOS! WE DO NOT DISTRIBUTE BETA BIOS!!
Q: What is the best BIOS setting for my board?
A: The optimal BIOS setting is different for each system. It's recommended to read more about the BIOS settings, from the board's manual, and some good guides like this : link.
2. Overclocking
Q:I cannot overclock my system. Can MSI update the BIOS so I can overclock?
A: This board can overclock, but overclocking depends on the peripherals that you are using like memory, CPU, heatsink etc.
Q: Which board has Dynamic Overclocking Technology?
A: Currently only 865PE Neo2-FIS2R
Q: How to disable dynamic overclocking?
A:Yes, you can disable Dynamic clocking directly in the bios setup.
3. CoreCell Technology
Q: which product has CoreCell technology built-in?
A: 875P Neo (MS-6758), 865GE Neo2 (MS-6728) & 865PE Neo2 (MS-6728)
Q: Can I assume that boards with CoreCell chip to have D.O.T ?
NO
Q: Where are the locations of temperature sensors?
CPU - taken directly from CPU pin (same as AMD thermal pin.
System - RT2 (near winbond I/O) same for 875/865 series boards.
4. RAM
Q: I have this RAM xxxx but it does not work with my board. Can MSI update the BIOS to fix this?
A: We would suggest you to use the MSI recommended memory for this part as there are a lot of memory brands out there we can't guarantee that all will work with the MB. Please go to the Product Info page, click "Test Report" and choose "Memory Modules".
For example, 875P : Here and select Memory Modules.
Q: My RAM performance is slow, the benchmark software such as PC Mark, Sisoft etc results are below par compared to other brands. WHY?
A: This issue has been identified. New BIOS update has fixed this problem. Please update to the latest BIOS.
Q: Is there any workaround?
A: There are users here share valueable information of how they tweak their BIOS to achieve good results. Kudos to them! :D Take a look at this link.
Q: What is MAT?
Memory Acceleration Technology. More to read here! Please read all to get the whole idea. You should have the idea what actually it is. :D
Q: Why my Neo2-S/LS doesn't have MAT?!
GOOD NEWS!! After first week of July, the new BIOS release will enable MAT in all Neo2 boards!
Q: What about DOT?
OK. Here is the answer:
Additional Info for MAT support:
MS-6728 BIOS V1.3 (All 865PE will support)
(Note: No MAT option for 865G due to limitation) Though the 865G have no support for MAT but if you insert AGP VGA card, you could still avail of this function!!
DOT support:
MS-6728, for exist boards, only full version supports it
Q: I want to have both MAT and DOT, can I do that?
Of course you can. However, the amount of setting you can used would depend on your current configurations. The suggested stable configuration if MAT as Fast & DOT as Captain
Q: Then what is PAT?
This is what I found in the forum, written by Assaf.
Quote
Here's what I understand about PAT.
As you may or may not know adding pipline stages to any execution unit will allow you to run it at a higher frequency but it will increase the latancy from start to end (measured in clock pulses).
Now, in order to ensure reliable operation at 800MHz FSB intel added 2 pipline stages to the memory controller (as based on the original dual memory controller in the E7205 chipset)
This they called i865PE and it will only put into action these 2 stages when 800MHz FSB is applied (which it needs the bios to tell it is the case)
Intel take the better yealdes of 865PE and validate them for 800MHz with the 2 extra stages disabled.
These they call 875P.
A 875P bios with PAT enabled simply does not "tell" the chipset it it running at 800MHz so the extra stages are inactive thus reducing latancy relative to a situation where these stages were activated.
A hacked 865PE bios will simply follow the 875P bios rule of not notifing the chipset it is running at 800MHz.
PAT is not an optimization, it's a de-un-optimization
[/color]
Q: Can 875P/865PE boards support DDR266 RAM for 800MHz FSB CPU?
Yes, although the product webpage did not highlight DDR266.
Q: My Kingston HyperX RAM always cause errors with 875/865 board!
Known issue. Please read here: http://www.kingston.com/support/faqs/memory/intel_3.asp
Q: My system does not run stably with DDR400
A: Set DDR Voltage to 2.7V and above for DDR400, regardless what the RAM manufacturer advertised.
Q: How to set different FSB:DDR ratio? I can't find in the BIOS
The FSB:DDR ratio can be changed by setting DDR Clock [266,333,400,500,533]. However, your processor's default FSB will affect the ratio. Follow this table:
FSB DDR ratio
133 266 1:1
133 333 4:5
133 400 2:3
133 466 -
133 500 -
133 533 -
200 266 3:2
200 333 5:4
200 400 1:1
200 466 -
200 500 4:5
200 533 3:4
If you have 800FSB (200Mhz) CPU, use FSB200 table. If you have 533FSB (133MHz) CPU, use FSB133 table to get the ratio. Ratio "-" is not available and out of chipset limit.
Examples:
1. DDR400 overclock P4 2.4GHz to 3.0GHz. Ratio 5:4. FSB:250MHz. DDR Clock : 333MHz
2. DDR333 overclock P4 2.4GHz to 3.0GHz. Ratio 3:2. FSB:250MHz. DDR Clock : 266MHz
3. DDR500 Pr default. Ratio 4:5. FSB:200MHz. DDR Clock: 500MHz.
5. HDDs
Q: Can Promise RAID support 2 PATA + 2 SATA = total of 4 HDDs for a single RAID array? RAID-0? RAID-1? RAID-0+1?
Yes, Promise RAID support 2 PATA + 2 SATA (RAID-0 or RAID-1 or RAID-0+1)
Q: Does ICH5R's SATA controller support RAID?
Yes, but only ICH5R, not ICH5. Update: MSI has released beta BIOS 1.81B with ICH5R RAID-1 support. Check the link above in the BIOS section.
Q: My HDD LED doesn't lit!!!
As what I have been told that the HDD LED only lit when there are activities in IDE Primary and Secondary channels. No support for ICH5's SATA and/or Promise SATA activities yet. In other words, the HDD LED will not lit and indicate any activities for your SATA drives.
Q: What is SATA? What is PATA?
SATA = Serial ATA. There was no such "PATA" acronym before. After Serial ATA appeared, people started to find IDE as opposing to Serial ATA, and hence called IDE as "Parallel ATA" or PATA.
Q: I enable SATA in BIOS but I didn't see any SATA Controller listed in the Device Manager!
You will see two sets of IDE ATA/ATAPI Controllers - Intel 82801EB Ultra ATA Controller x2, Primary IDE Channel x2, Secondary IDE Channel x2. That's how Windows installed the drivers.
Q: How should I install my HDD for RAID configuration?
Note that the Promise RAID controller only controls IDE-3, SER-3 and SER-4 ports. Make sure you have your HDDs connected to these ports. Make sure you have enabled "Onboard Promise IDE" in the BIOS. Then after the POST screen, press CTRL-F once prompted and go to the RAID setup screen to setup your RAID configuration.
While the ICH5R controls IDE-1, IDE-2, SER-1 and SER-2. For ICH5R, only SER-1 and SER-2 can be set as RAID. So make sure your SATA HDDs are connected to SER-1 and SER-2. But make sure you have enabled "Configure SATA as RAID" in the BIOS. After the POST screen, press CTRL-I once prompted and go to the ICH5R RAID setup screen to setup your RAID configuration.
For more comprehensive RAID setup guide, please read this guide written by vango44. Great contribution!!
Q: My SATA HDD always gives me errors, data corruptions and can't boot!!
Check the SATA HDD's bridge chip with a "M" logo, the chip build has to be B5P and above, not B2P/B3P which are known to be buggy. B4P is OK but B5P is better. Maxtor and Western Digital SATA HDDs are known to use this bridge chip. Seagate Barracuda V uses different bridge chip and does not make that much problems compared to Maxtor's. RMA the HDDs if possible. MSI is working on the BIOS to fix this incompatible issues. Get BIOS 1.9B3 or 1.6B2 or above. I have seen around October 2003 that Western Digital HDDs come with B5P bridge chip.
Q: I want to use IDE3 for normal HDD, non-RAID
Set this in the BIOS under Integrated Peripherals:
Onboard Promise IDE : As SATA
Q: What is Legacy mode and what is Native mode?
Legacy mode uses 14 and 15 IRQs. Legacy mode can support up to 2 IDE channels, each IRQ for each channel, which means it can support 2 SATA, or 2 SATA + 2 PATA or 4 PATA. Legacy mode also works comfortably with most OSes including Linux.
Native mode means you may use all available IRQs and can support up to 2 SATA and 4 PATA. Native mode may have issues working with some OSes such as Win9x and Linux, especially on IRQ assignments.If you have Win98/ME, use Legacy mode only!
Q: How to enable both SATA and PATA?
You can use both Legacy mode and Native mode, depending on how many devices you use as described above.
For Legacy Mode:
ATA Configuration: PATA+SATA
S-ATA Keep Enabled: Yes
P-ATA Keep Enabled: Yes
PATA Channel Selection: Both
Combined Mode Operation: PATA First/SATA First, depending on which you want to act as 1st Channel.
S-ATA Ports Definition: P0-1st/P1-2nd or P0-3rd/P1-4th, depending on which you want to act as Master.
For Native Mode:
ATA Configuration: SATA Only or PATA only, depending on which you want to be the FIRST BOOT device!
S-ATA Keep Enabled: Yes if you chose PATA only
P-ATA Keep Enabled: Yes if you chose SATA Only
PATA Channel Selection: Both
Combined Mode Operation: PATA First/SATA First, depending on which you want to act as 1st Channel.
S-ATA Ports Definition: - P0-1st/P1-2nd or P0-3rd/P1-4th, depending on which you want to act as Master.
Q: What is S-ATA Ports Definition?
There are two options: P0-1st/P1-2nd and P0-3rd/P1-4th. If you choose P0-1st/P1-2nd, your Port-0 S-ATA (SER-1) will become the 1st IDE Master, ie IDE-1 Master. and Port-1 S-ATA (SER-2) will become 2nd IDE Master. If you plan to boot with SATA HDD, it's recommended to set to P0-1st/P1-2nd. If you plan to boot with PATA HDD, it's recommended to set to P0-3rd/P1-4th.
Q: When I enable SATA+PATA mode, why only IDE-1 or IDE-2 can be used?
If you chose "SATA 1st Channel", IDE-1 will be dropped. If you chose "PATA 1st Channel", IDE-2 will be dropped.
Q: I want my SATA to be the 1st IDE drive in Legacy Mode along with PATA, how?
Set this:
ATA Configuration: PATA+SATA
S-ATA Keep Enabled: don't care
P-ATA Keep Enabled: don't care
PATA Channel Selection: don't care
Combined Mode Operation: SATA 1st Channel
S-ATA Ports Definition: P0-1st/P1-2nd
With this configuration, you can have your SER-1 and SER-2 act as IDE-1 master and slave. But you can only connect your PATA drives on IDE-2 slot.
Q: I am a noob, I want more details.
More info? here
Q: How to support 250GB HDD? Windows only sees up to 134GB.
Follow this instruction: here for Win2000 and WinXP.
Q: I've installed a new SATA HDD, I can find it in Device Manager but it doesn't appear in Windows Explorer at all! HELP!!
You need to format the HDD, not just SATA but also PATA HDD then only Windows Explorer can see it and assign it with a drive letter. To format a HDD, right click on My Computer, select Manage, look for Disk Management. You should see a no-drive-letter unformatted drive there in the list. Get it formatted by right click on it and choose the obvious option there is.
6. Onboard Sound
Q: My onboard sound lost after I overclock the system!
Goto BIOS setup and lock AGP/PCI to 67/33.
7. Universal Serial Bus [Thanks to Danny for contribution]
Q: Why doesn't my board have USB2 ports?
A: The ICH5 and ICH5R chipsets support up to 8 USB2 ports. Under Windows XP when you view your USB settings using Device Manager you will see 4 Intel 82801EB USB Universal Host Controllers and 1 Intel 82801EB USB2 Enhanced Host Controller; Windows 2000 is similar, you are looking for "Enhanced". If you don't see "Enhanced" you need to install SP1 for XP or the latest service pack for W2K. If you have these service packs installed and still don't see enhanced, used the Device Manager to remove the 5 controllers and reboot to allow Windows to correctly install the right drivers.
Q: If I have 8 USB2 ports, why does Sandra tell me they are USB1.1?
A: When lower speed devices are plugged in, or high speed devices are plugged in without USB2 operating system support, they are routed to the low speed host controllers. High speed devices are routed directly to the Enhanced host controller when operating system support exists.
Base on http://www.intel.com/design/chipsets/manuals/29865602.pdf
8. CPU - contributed by Danny! :biggthumbsup:
Q: I have an 800 FSB Pentium 4 CPU, but the bios is set for 200! If I set it to 800 it crashes! What is wrong?
A: The FSB rating of the CPU is 4 times the FSB rating of the motherboard. To quote Intel: "This is accomplished through a physical signaling scheme of quad pumping the data transfers over a 200 MHz clocked system bus and a buffering scheme allowing for sustained 800 MHz data transfers." So valid settings are 100 for a 400FSB CPU, 133 for a 533FSB CPU and 200 for an 800FSB CPU.
Q: The Windows task manager and the Device Manager show I have two CPU's. What's wrong?
A: Your CPU is a model that has Hyperthreading technology and it is enabled in the bios. To quote Intel: "It allows software programs to "see" two processors and work more efficiently. This new technology enables the processor to execute two series, or threads, of instructions at the same time, thereby improving performance and system responsiveness."
Q: Do these boards support Prescott CPU?
Update: Prescott spec is not finalized. There might be more requirements needed other than meeting FMB guideline. It is hard to say if current motherboards can fully support it. [/color]
This is the latest info from MSI. Check this link here
9. Power Management
Q: What are S1/POS and S3/STR modes?
S1/POS = Power On Suspend, nothing turn off just that everything is running in extremely slow.
S3/STR = Suspend to RAM, PSU only powers 5V_STBY to the board for RAM refreshing, the rest all off.
Additionally,
S4 = Suspend to Disk. Win2k/XP calls it "Hibernation" mode. In this mode, the RAM and CPU state images are copied into the HDD. After S4 mode, you can safely remove the power cord.
S5 = Soft Off. PSU still supplies 5V_STBY.
G3 = mechanical off. No power at all to the board.
Q: Where to set the standby modes?
For S1 and S3, you can set the standby mode to either S1 or S3, not both, in the BIOS. Note that Windows cannot choose which standby mode to run. You have to set it in the BIOS.
For S4, you can only set it in Windows 2k/XP (and ME, but not 98).
10. Others
Q: I have MSI FX5900 which has double sided fans, can it fit in the board?
Most boards can fit the FX5900. Including, the NEOs' MS-6728, MS-6758, and others like KT4A ultra, MS6777 Nvidia board.
Q: Why my NB Temp value is always stay the same?
On 875P Neo and 865PE Neo2, there is no NB temp sensor! The value you read from CoreCenter does not mean anything. Please update to the latest CoreCenter.
Q. What are the two lights on my "P" series board for?
A. These are the Overclock Signal Lights:
1. Green, Green: Both AGP and CPU are dynamic overclocking.
2. Green, Red: The memory is overclocking to 533MHz.
3. Red, Green: The external frequency is overclocking to 350MHz, and the frequency between the north bridge and CPU is 1400MHz.
4. Red, Red: CPU is dynamic overclocking now.
There are more to come soon. Please do not reply or request for FAQ contents in this thread. The FAQ will be picked up from the popular threads. Thanks.
Update History:
6/23/2003 : Added onboard sound lost fix
6/25/2003 : Added HDD LED
6/26/2003 : GOOD NEWS!! MAT to be available in all Neo2 boards!
6/27/2003 : SATA, PATA
7/1/2003 : 865G MAT support!!
7/7/2003 : MAT + DOT support
7/7/2003 : Prescott CPU support
7/7/2003 : DDR266 RAM support for 800MHz FSB CPU
7/17/2003 : Prescott CPU support UPDATED
7/18/2003 : SATA & PATA updated
8/15/2003 : latest BIOS updates
8/15/2003 : RAID-1 support for ICH5R
8/16/2003 : RAID configuration
9/02/2003 : beta BIOS updates - 1.81B
9/03/2003 : beta BIOS update for 865 - 1.52B
10/03/2003 : beta BIOS update for 875 - 1.9B3
10/06/2003 : beta BIOS update for 865 - 1.6B2
10/08/2003 : beta BIOS update for 865 - 1.7B1 link provided
10/13/2003 : minor updates on old issues
10/16/2003 : NB temp sensor?
10/19/2003 : Promise IDE3 for non-RAID function
10/20/2003 : Prescott updates
10/21/2003 : FSB:DDR ratio
11/21/2003 : Legacy, Native mode, SATA+PATA Configuration
12/01/2003 : BIOS 1.9B6 for 875P
12/15/2003 : Prescott Support, 250GB HDD support, BIOS 1.9 FINAL
1/11/2004 : BIOS 2.01B for 865PE Neo2, BIOS 3.30 for 865PE Neo2-P
1/12/2004 : USB 2.0 [thanks to Danny for contribution]
1/26/2004 : SATA + PATA Revisited
1/26/2004 : Added 8. CPU [contributed by Danny]
1/27/2004 : Added formatting SATA HDD in WinXP
1/28/2004 : updated on SATA+PATA and links with Danny, Vango44 and Uruk Hai's contributions :biggthumbsup:
1/28/2004 : Added power management
04/05/2004 : Added two lights on "P" series boards [Danny]Dear [Maesus],
I have tried to duplicate the issue, I saw it only once when I reflash the BIOS and then change the CPU clock setting.
My procedure as below…
1. Boot system
2. Update BIOS to 1.9 version
3. Restart the system to BIOS setting
4. Change the CPU Bus Clock to 229
5. Save the setting & exit and then the system restart automatically
6. And then I saw the CPU is only running 1.86GHz (my CPU is 3.2GHZ FSB 800MHz)
But I would like to explain that my procedure as above is incorrect.
The correct procedure should be as below….
1. Boot system
2. Update BIOS to 1.9 version
3. Restart the system to BIOS setting
4. Load BIOS setup default first
5. Change the CPU Bus Clock to 229
6. Save the setting & exit and then the system restart automatically
7. And then I saw the CPU is running 3.66GHz (my CPU is 3.2GHZ FSB 800MHz)
Note: To load BIOS setup default setting after reflash BIOS that is because all original default setting will be erase after upgrade BIOS. So we always recommend customers to load BIOS default setting first before change any BIOS setting.
BTW, we have updated the BIOS version to support Prescott CPU. Users can decide to update it or not.
The new release BIOS as attach file.
Best regard!
[MSI Staff] -
Regarding trying to connect my iphone 5 to HP-Print-76-Deskjet 2540
Regarding my HP Print 76 Print Deskjet 2540 ive set up the wireless connection but when i come to print of my phone my phone cant find the printer although the printer shows up in my wireless connections page but im on the iphone 5 and using google cloud print but google cloud print cant the the printer can you help plssss
ade73
Welcome to the HP Community Forum.
You can install the Full Feature Software on your computer(s):
Install Full Feature Software – Printer
You might like to download a copy of the User Guide:
HP Deskjet 2540 All-in-One series - User Gujde
The printer is compatible with AirPrint: Airprint compatible printers
Printing Over a Wireless Network with Apple's AirPrint FAQs
==================================================
Google Bits:
Using Google Cloud Print with your HP Printer
Reminder: You must have the Google Chrome Web Browser installed
on your computer to use Google Cloud Print with a Classic Printer.
Windows, Mac, or Linux
From Google: Connect your classic printers with Google Cloud Print
==================================================
Adding Mobile Devices > Steps 1--2-3 and Troubleshooting
You can add your Mobile devices - on the same network:
HP Mobile Printing
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur -
Some faqs can u solve dis answers asp
1) How do u handle table control in bdc?
2) What is diff b/w normal functional modules and BAPI's fm's?
3)what is fct-code of at- line- selection?
4)why do u use subroutine pool in scripts?
5)name few performance techniques?
6)in how many ways u can design interactive reprt?
7)what is the need of table maintainance option at the begin of table creation?
8)what is the system landscape?
9)what is the use of submit command in exe program?
10)how do u create secondary index?
11) what is the diff b/w sap memory and abap memory?
what is the max size of date records?
2)what is the max size of IDOC?
3)what is the relationship b/w ALE and EDI?
4)when u have data transfer, why do u chose IDOC's?
5)i have 200 records how u decide how many records should execute per IDOc?
6)ALE customizing method?
7)how do u define logical systems and assign logical systems to clients?
8)what is change pointer technique?&what is need of change pointer technique?
1) name the events in order in case of classical report?
2)if i put write statemnt in at slection-screen,does it works?
3)can u call multilple selctio screen in one report?
4)what is diff b/w integration & at slection-screen ouput?
5) i have a requirement like i have 3 radio butons in one group,
if i select one radio button then remaining radio buttons are invisible what is the code for this?
6) how do u decide which method is suite for paricular requirement if not specified in bdc?
i.e session or call transction?
7)what is BAPI?
8)how BAPI differ from ALE?
9) steps of configuring of EDI?
10) is layout set is client dependent or not?
11)how to transfer layout sets to test client side?
12)what is the protect......end protect?
13) for what purposeu create multiple wqidows in one page?
14)what are diff areas wher ucan ouput text in main window?
15)what method u use to output text in (top........endtop) or write_form?
16)what is the reason for use of write_form rather than top------endtop?
1)i need a logo on the right hand side of corner . how do u handle that?
2)what is the standard table for storing standard symbols?
3)how do u represent page no in scripts & total page nos?
4)what is the transaction code for dump analysis?
5)when top-of-page vent triggred?
6)can i plce write stament in any event?does it works?
7)what is the use of end-of-selection event?
8)what is stop& exit?
9)what happens if i plce write statement in end-of-selction?
10)what is sy-ttill?
11)does the value of sy-subrc chnge after if and write stament?
12)what is bdc & types of bdc?
13)when do u choose session , call transaction methods?
14)how may types of symbols? what are they?
15)what is the diff b/w constant & variable symbols?
16)what are the parameters in open_form & start_form?
17)does text orientation(190degrees ,145 degrees) is possible in sap scripts?
18)how do u delete text from a layoutset window?
19)what are u need to take care while transporting the request? for exeampl u developed a exit ,whta care do u take?
20) what wil u do for preparing technical specs form functional specs?
21) what is addres....endaddress in sap scripts?
22)which method do u prefer synchronous or asynchronous?
23)what is output type?
24)what does slection-screen of RBDMIDOC contains?
25)what parameters u specifyng in RFc destination?
26)what customiging y do to transfer the data from one logical systme to another logical system?
27)can u explain brifely how idoc's genrated?
28)if i just extend the idoc, what are the things u need to do?can i extend the same ouboud program?
29)can u just explain what partner profile contains?
30)what are process codes?
31)if i just develop a gui status using pf-status.is it confined to single program or can be used for any other programs?
32)what is client?
33)what is diff b/w se01,se09,se10,stms transction codes?
34)what is the diff b/w select single * from kna1 and select * from kna1 for all entries?
35)in subroutines paramaters are changing & using .what is the diff b/w them?
1) what is the diff b/w scripts & smart forms?
2)what are the function module used in smart forms?
3)what are the function module? what is the use of them?
4)what is the index? what is the secodary index ? whta is uses of them?
5)what is the table technical characteristics?
6)waht is buffering? types?
7)what is the use of interactive reprt?
8)what is the use of alv?
9)what are problems u have faced when u r doing projecs?
10)what is the diff b/w template & tables?
11)which function module used for transferring from one version to anthoer version?
12) what determines the sequence in events blocks are processed?
13)in what case are otional parameters allowed in the passig of parameters?
a) functions b) forms
14)what relationship can be esatblished in watch points?
15)what are requiremets of reading hashed internal table?
16)what does a context object provides?
17)what access methods are avaliable for accessing internal table?
18)what operations are allowed when processing data of records in internal table?
19)what tasks could be performed in SAPNET?
20)what is search help?
21)what is the lock object?
22)what is diff b/w domain and data elemnt?
23)what is diff b/w check table and value table?
24)what are the control break statements?
25)how to display SUM?
26)what is the diff b/w select single & select upto one row?
27)collect what it did?
28)how to findout data in internal table?
29)syntax for describe statement?
30)hwo to findout if internal table is empty or not?
31)hwo to transfer data from one internal table to another internal table?
32)how to modify internal table?
33)Read statement syntax?
34)what is the default event?
35)i have write only top-of-page event in that write: / 'welcome' what will happen?
36)what is message-d?
37)what is the diff b/w with events & without events?
38)what is the purpose of Direct input method?
39)what is local object?
40)is it possible to back ground process in call transaction? how?
41)what are diff types of errors?
42)what are the diff types function modules used in layout set?
43)what is the diff b/w open_form & start_form?
44) how to define logo?
45)after modification how to send modified form to modified print program?
46)what are the symbols in sap scripts? functionality of them?
47)how to write a Report in another Report?
48)syntx fr submitt &what it did?
49)what is the land scape of ABAP?
50)what is index? types?
51)hwo many secondary indexe are possible to create?
52)what is diff b/w select single * from & select upto one row?
53)in my 100 records 55th record is need some changes and that record how to send body to header line?
54) what is the use of indexs?
55)what is the diff b/w page area & roll area?
56)diff b/w interface & conversion?
57)how we configured ports andpartner-profiles?
58)what si the Enhancement and what u had did with user-exist?
59)who can extend Idoc?
60)how many types of select staments?
61)what is header line?
62)what is diff b/w internal table work area & table work area?
63)if we don't have header line what will happen?
64)when the user-exist will triggered? for which purpose u have used and where u have written?
65) how we linked the tables?
66)in at selection-screen and at user-command event which one is triggred?
67)what is the use of at pf-status? where did u use it?
68)is it possible to run Host command inSAP environment? how do u run it?
69)what are user-exists? what is involved in writting them? what precautions are needed?
70)what is the version management?
71)if u send the objects from dev server to production server,but get some bugs so those bugs how to handle?
72)if u upload the data after that. i din't put committ,then what happen?
73)how to maintain dataintegrity?
74) how to validate fields?
1)how u connect the unix platform from SAP server?
2)what is database object ? Runtime object?
3)How to populate BDC table control?
4)How to implemnt intreactive list in alv?tell me fumnction module for that?
5)How to transfer from data list to transactions?
6)How can u add anew field to Script?
7)what are problems in processing batch input session?
8)diff b/w select-options & ranges?
9)what is meant by satck list?
10)if u don't have header line for internal table what will happen?
11)what is the max no of calling modes stacked at one time is?
12)what is collect command ? how it is works?
13)if u want come back from 15th list to basic list waht will u do?
14)what is the default mode of transfers data to and from application server?
15)what is the purpose of EXTRACT parameter?
16) how will u delete duplicate records from internal table?
17)in for all entries clause of select statement ,if internal table is empty what will happen?
18) How can u find the no of records in a table?
19)Billing and invoice details are where stored?
20)what is the typical structure of ABAp program?
21)what is diff b/w ABAP program &user defiend program?
22)can a transperent table exists in a data dictionary and not in the physical database?y/n
23)diff b/w Collect & Append?
24)logical unit of work means?
25) How many types of lock objects exists? what are they?
26)what will u don inSPRO?
27)how many tyeps buffers?
28) what wil do by Maintainance generator?
29) what is o/p type? what is done by this?
30)program for BAPI?
31)what is ALE implementation progarm?
32) say the function code to catch function code F2?
33) what is IDOC& how u can extend the IDOC?
34)what is the advantage of LSMW?
35)how many types of symbols u have on scripts & in which order they can executes?
36)what is purpose of data conversion into SAP format from Legacy?
37) what si the t-code for watch the flat file in application serever?
38) what is purpose of driver program?
39)what is contents of Functional Spec?
40)what is contents of Technical Spec?
41)How do u diasble a control in a selection-screen logic?
42)what is source structure?
43)what is target structure?
44)if u don't have the access to modify the print program then how do u insert the text elemnts?
45)how can u call report in another program?
46)specify the events for classic & intractive reports in order?
47)say some usally used system fields in our programs?
48)how can u create check box in alv?
49)diff b/w select-options & parameters?
50)how can u create labels in scripts?
51)how u display the data in scripts?
52)What is the diff b/w At selection-screen output & initialization?
53)how u trap the errors in call transations?
54)diff b/w scripts & smart forms?
55)types of internal tables & explain them?
56)how many types of loops?
57)Diff b/w Synchronous & Asynchronous RFC
58)How u place data in table cotrol?
59)what are the methods execute in LSMW?
60)diff b/w sy-index & sy-tabix?
61) in call transaction bckground process which mode u prefer?
62)what is configuration of ALE?
63) what are all read operations in itab?
64)diff b/w search help & pov, which one trigger first?
65)where u can u do the validations in report?
66)what are the events in Module program?
67)diff b/w call transactions & session method and wher trap erros in both methods? how?
68)diff b/w scripts & reports?
69)how u define text elemnts inscripts?
70)what are the function modules inscripts?
71)how u diplay the data in scripts?
72)how do u do the perfomance testing?
1)when it wll triggerd initialization event? Before how many events will triggerd?what are they?
2)how many types of meaasges ?
3)what is use of Dump analysis?
4)what is the use for all entries?
5)what Is the diff b/w check & continue?
6)whenever use EXIt statement whappend in loop endloop and within subroutines, within start-of-selection ,with in end-of-selectio and in initialization?
7)what is the diff b/w value table and check table?
8)in data element level I used search help and in domain level I used value table which will be shows our criteria?
9)without doing any changes in printprogarm I want to add some fields how can?
10)how many mainwindows in one page? What is the use of remaing main windows?
11)what is sy-index & sy-tabix?
12)what are the qualities u have to maintain to ur developments?
13)Smart forms are client independent how u justify that?
14)in keyindexex what is the relationship 1:n?
15)in dynpro how can insert radio butto?
16)How can u use search help?
17)in MEDRUCk(ME21) I have changes some fields so immediate those changes send to Vendor through e-mail or fax? What is procedure?
18) I worked in foreground one session successfully so tommarow I have to work same session in back ground then what happen?
19)in bdc table control wher u have to face problem?
20)In alv grid control at the top I want header/ how can u display?
21)how can u print long text in scripts?
22)how to display Text every 4 lines after?
1)how can u create u r own types in an ABAP report?
2)which system variable is encounted in loop counter?
3) which system variable is store the record counter?
4)does a select statement carry out any authorization chek?
5)what is function of environment variable sy-lisel in interactive reports?
6)how can we identify which button is pressed?
7)diff b/w se09 ,Se10?
8)table in which entry for development class is made?
9)which client is authorized to create the workbench oragnizer configuration?
10)can we provide more than one PBO PAI for one screen?
11)which view can even possess one table?
12)What are field symbols?
13)which is ued to release to lock?
14)what are the various types of customer exists?
15)what is port?
16)what are the selection-text?
17)can we use perform in SAP scripts?
18)what is the t.code for table maintainance?
1)write validation logic for parameters option? Wher do u write ?(in at selection-screen or start-of-selection)?
2)what is the diff b/w IN jn where condition and without IN condition in where condition?
3)how can u display 21st secondary list ?explain procedure?(code?)
4)what is the diff b/w sorted and hashed tables?
5)can write statement in initialization triggers first or write statemnt in start-of-selection?
6)what can ud o if have no authorization to recording in BDC?(without F1 and Technical help)?
7)what is the diff b/w SAPLUW and DBLUW?
8)expalin VPN process?
9)what is the text in reports and scripts?
10)how can u release ur objects to end user?
11)write genereal statement to display dat-range?
12)explain pricing procedure in sap?
13)how can u display barcodes in sap scripts?
14)explain flow of S.D?
15)what are the performance techniques expect Modularization techniques I want remaning?
1)what is the purpose of initialization?
2)what are control break statements?
3)what is the diff b/w at new and on change?
4)what is the use of end-of-selection?
5)in Runtime analysis what ar the main area will be displaying for tunnning?
6)what are the ways to improve the performance the report?
7)What is the diff b/w maintainance view and databe view?
8)what are the type of search help?
9)what is the diff b/w include structure and append structure?
10)how can we generate new item in BDC program or the transaction ME21?
11) in calltransaction while transferring the data what happens idf the power goes off?
12) what are the standard programs for transfer the data for material master and vendor master?
13)whare we can assign the page size?
14)how can we call a subroutine in scripts?
15)how many max pages we have to design for script ?
16) what is use of protected and end protected?
17)what are the types of functional modules?
18)how many types of screen filed validations? What ate they?
19)how to convert the scripts to smartforms?
20)what is the history of purchase order? Wher is it store?
21)can we debug smartforms ?
22)what is the material history and where is it store?
23)what are the functional modules ued in ALV?
24)what is the fieldcatalog merge use?
25)how u print the heading in ALV ?
26)what is the t.code for BDC?
27)what is the purpose of application server?
28)what are the text elements ? what is the use of text elements ?
29)how u create vertical line and horizanatal line in reports?
30)what is the purpose header line?
31)what is the purpose of occur clause?what default area it occupies?
32)what are text elements?
33)how many secondary indexes we can create for a table?
34)What is the ue of st05?
35)what is the foriegn key table?and check table?
36)what are some essential steps for loggig changes made to SAP data?Hi Mahesh,
Very good questions. Infact it's very difficult to answer all the questions.
You can search many FAQs in net...
If you have any specific questions related to single topic, Post message for each.
I can send some of FAQ documents to u
Answers
1) Using Index like Field(1)-1st record field , Field(2) - 2nd record field etc... in Table control.. we can handle BDC
2) BAPI will be programmed using OO concepts more.. and as Interfacing is more enhanced here than normal FM.
etc...
Regards,
Manjunatha -
Hi all
Rather than going through the FAQ"s available in the Internet.I think questions that you experienced in the intervies will be really helpful for us.So am posting a few a question that i was asked in a interview.I request you to answer them and very importantly.Please post a few question that you reallly faced in the interviews.It will Contribute to all of us.
1.How to get the number of records that a particular report has generated.
Ans:By using the "describe tablle it_final lines ld_lines."
where ld_lines is a variable of integer type.
2.There is a report which has 85 records and it is displaying 10 records per page and it has a heading say "XYZ'" which we are getting by using TOP-OF-PAGE.Now tell me for this 85 record how many time the TOP-OF-PAGE event gets triggered.
Ans:I think its 9.Please confirm me.
3.We all know how to create a logo in a Script.Now the requirement is we need to print the LOGO of the customer.And each time the customer keeps changing.How to do it in a Script.
Ans:I dont know.I acknowledege if anyone could answer this question.
4.I need to print the value of a particular field in the TOP-OF-PAGE in a ALV report.How to do it.
Ans:In the Function "REUSE_ALV_GRID_DISPLAY" there is i_callback_top_of_page so here gve as
i_callback_top_of_page = 'TOP-OF-PAGE'.
5.How to print LOGO in a ALV report.
Ans.Use the function "REUSE_ALV_COMMENTARY_WRITE"
This where the few questions i was asked in ainterview.Rest the interviewer has asked me on the objects i"ve done.I request each one of you to contribute.So that it will be very useful to people appering for interviews.Because,i"ve seen most of the time we miss out on the basics though we used it.
Thank You.
With Regards,
Vijay Krishna GHello Marc,
Here are the answers -
1.
2. E.
Reason - The addition "IN UPDATE TASK" will always cause an asynchronous update. The updates are all fired when the next COMMIT WORK statement in executed.
3. B.
Reason - See this <a href="http://help.sap.com/saphelp_nw04/helpdata/en/9f/dbac5135c111d1829f0000e829fbfe/frameset.htm">link</a>
4. This does not make much sense to me. There can be more than one answer.
For Example -
--> Function modules <i><b>can</b></i> use a shared memeory area if the top include has some data.
--> Function Modules <b><i>can</i></b> have inbound and outbound parameters. but this is not always necessary.
=========================
Hope this helps.
Regards,
Anand Mandalika. -
Hi guys ,
This is SuryaNarayana . I have collected some faqs from www.**************** but they have no answers please answers these questions
Questions are releated in to XI-BPM
1. Business Process Management is concerned with ?
a. Processes within and across applications
b. Planned or spontaneous Human interaction
c. Automating, streamlining, managing business processes
d. Moving process control from application to technology layer
e. All of the above
2. Which open modeling standard ccBPM adheres to?
a. BPEL
b. XML
c. WSDL
d. None of these
3. High-Tech industry ccBPM implementation guidelines are known as ?
a. RosettaNet Implementation Framework
b. CIDX
c. Marketpalce
d. SAP BC
4. Individual "Swim Lane" in BPM modelling contains ?
a. Business Scenarios from same company
b. Business Scenarios from same Application
5. Different Panes within BPM editor in IR ?
a. Header
b. Editing
c. Process Overview
d. Property
e. Output
f. Object
g. All of the above
6. Data Declaration of the Business process can be viewed in ?
a. Correlation in Object area
b. Container in Output area
c. Container in Object area
d. None of these
7. Which of these is not Messaging relevant Step type ?
a. Receive
b. Send
c. Transformation
d. Receiver Determination
e. Block
8. Control Step can be used for, except ?
a. Terminate current process
b. Trigger an Exception
c. Trigger an Alert
d. Define different processing braches for process
9. Which of the following triggers process to start?
a. By receiving amessage assinged to receive step
b. Batch job by scheduling in WAS
c. Both of these
d. None of these.
10. To route response messages to the
correct process instance, _______ object is used ?
a. Correlation
b. Interface
c. Adapter
d. Mapping
11. Correlation handling is handled by ?
a. BP engine
b. Integration Engine
c. Adapter Engine
d. None of these
12. Container element can be typecasted to, except ?
a. simple XSD/XML Schema
b. Abstract i/f
c. Receiver
d. Multilne(vector)
e. Sender
13. Outer Container block has container element 'O' and inner Container block
has container element 'I'. Then which of the following is true?
a. Both 'O' and 'I' are visible in outer block.
b. Both 'O' and 'I' are visible in inner block.
c. Both of these.
d. None of these.
14. Simple Fork process step terminates when ?
a. All branches are true.
b. All branches are false.
c. Either true.
d. Either false.
15. Collect process pattern types includes ?
a. Condition
b. Receiver message
c. Append message
d. Increase counter
e. Merge message
f. Send message
g. All
XI-Releated questions
1. SAP XI is an Integration technology and platform?
a) for SAP and non SAP applications.
b) for A2A and B2B scenarios
c) for asynchronous and synchronous applications
d) for cross-component Business Process Management.
2. XI represents the following layer in the NetWeaver stack:?
a) People Integration
b) Information Integration
c) Process Integration
3. XI uses the following web standards ?
a) WSDL
b) XSD
c) SOAP
4. XI components include?
a) SLD (System Landscape Directory)
b) Integration Builder
c) Integration Server
d) Central Monitoring
e) Adapter Engine
5. Integration Builder is a?
a) Java application
b) ABAP application
c) .NET application
6. Java Web Start is required for?
a) Caching java clients
b) Drawing pictures
c) Connect to SUN systems
7. SLD is a?
a) Client application
b) Server application
8. XI is technically a client of SLD?
a) TRUE
b) FALSE
9. SLD adheres to?
a) Common Information Model
b) Web Services Definition Language
c) XML Schema Definition Language
d) XML
10. Usage of PCK (Partner Connectivity Kit) ?
a) Allow small partners and subsidiaries to communicate natively with XI
b) For Partners to connect to database systems7444
c) Allow Partners to connect to .NET and Java applications
11. Certain adapters are needed in cases where the Integration Server
is to exchange messages with an R/3 system based on basis kernel lower than?
a) 6.10
b) 6.20
c) 6.40
d) 4.5
12. XI supports the following QoS (Quality of Services)?
a) BE (Best Effort)
b) Exactly Once (EO)
c) Exactly Once In Order (EOIO)
d) Exactly Twice In Order (ETIO)
13. QoS BE is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
14. QoS EO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
15. QoS EOIO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
16. Adapter Framework is based on ?
a) JCA (Java Connector Architecture)
b) NCA (.NET Connector Architecture)
c) PCK (Partner Connectivity Kit)
d) WSDL (Web Services Definition Language)
17. XI Adapter Engine is based on the integrated?
a) ABAP engine
b) J2EE engine
c) .NET engine
d) JCA (Java Connector Architecture)
18. Integration Processes are built using?
a) WSDL (Web Services Definition Language)
b) BPEL (Business Process Execution Language)
c) XSD (XML Schema Definition Language)
d) JCL (Java Connector Language)
19. Runtime Workbench in XI is the central monitoring tool for the following?
a) Component Monitoring
b) Message Monitoring
c) End-to-End Monitoring
d) Performance Monitoring
e) Queue Monitoring
f) Schedule Monitoring
20. XI uses enhanced version of SOAP protocol called?
a) XI XML
b) XI SOAP
c) XI XSD
d) XI PML
21. What is the cardinality of MESSAGE TYPES : DATA TYPES ?
a) 1:1
b) 2:1
c) 2:2
d) 1:0
22. What are the advantages of ASYNCHRONOUS updates?
a) Acknowledgement can be sent back
b) Messages can be persisted.
23. What are the advantages of SYNCHRONOUS updates?
a) Acknowledgement can be sent back (messages can be persisted with additional configuration)
b) Messages can be persisted.
c) Messages cannot be persisted.
24. What is the Message format used in XI for processing?
a) Specific implementation of SOAP which is XI XML
b) JMS
c) RFC
d) CIDX
25. What is an Adapter?
a) Adapters are used to communicate to Legacy or SAP systems with WAS version < 6.2
b) Adapters are used to retrieve information from Java, .NET systems
c) Adapters are used to import IDOC, RFC information.
26. In the Integration Repository, what is the KEY of an
object or how can an object be uniquely identified?
a) SWCV, Namespace, Name
b) Namespace, Name, Description
c) Name, Description, SWCV
d) SWCV, SWCV1, SWCV2
27. How do you classify NAME SPACE in an R/3 Environment?
a) Equivalent to function group
b) Equivalent to development class
c) Equivalent to function module
d) Equivalent to BAPI
28. What is ICM?
a) Internet Console Manager
b) Internet Communication Manager
c) Infrastructure Communication Manager
d) Intranet Communication Manager
29. A Customer has WAS 6.2 and has decided to use XI?
a) He cannot use XI unless WAS 6.2 is upgraded to WAS 6.4
b) Can use XI with some additional patches
c) WAS 6.2 already has XI in it. No need of any additional software
30. What is the name space of an IDOC?
a) urn:sap-com:document:sap:idoc:messages
b) urn:sap-com:document:idoc:sap:messages
c) urn:sap-com:sap.document:idoc:messages
d) urn:sap-com:document:idoc:messages
31. What is the name space of an RFC ?
a) urn:sap-com:document:rfc:sap:functions
b) urn:sap-com:document:bapi:rfc:functions
c) urn:sap-com:document:sap:rfc:functions
d) urn:sap-com:document:remote:rfc:functions
32. What doesnt get transported when the configuration is released?
a) All Objects will get transported
b) Generated proxies and application coding in the application
components does not get transported when the configuration is released.
c) Only application coding will not get transported.
d) Only generated proxies will not get transported.
33. How many Pipelines are there in the integration server?
a) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding, Call Adapter, Request Message Mapping.
b) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding.
c) Message Branch, Request Message Mapping, Outbound Binding,
Call Adapter, Request Message Mapping.
34. What are the possible Trace Levels?
a) 0 No Trace,1 Low Trace Level,2 Medium Trace Level,
3 High Trace Level,4 Expert Trace Level
b) 0 No Trace,1 Low Trace Level,
2 Medium Trace Level,3 High Trace Level
c) 10 Low Trace Level,20 Medium Trace Level,
30 High Trace Level,40 Expert Trace Level
35. Does JMS adapter need additional driver to communicate to database?
a) Yes
b) No
c) JMS adapter is not available in XI
36. What is use of PCK?
a) Partner Connectivity Kit that helps Partner Systems with no ability
to communicate in XML speak to the Business Systems.
b) PCK is used to deploy additional drivers
c) PCK can be used as an alternative to XI
37. What is Context Object? What is its role?
a) Context Objects are pointers to a specific element within the message,
for future reference. Encapsulate the access to data that is contained
in the payload or in the header of the message.
b) Another form of data types
c) Can be used instead of message types
38. What adapters dont need Sender Agreement?
a) HTTP, IDOC.
b) IDOC, RFC
c) IDOC, JMS
d) JDBC, JMS
39. What is the Protocol followed for Mail Adapter?
a) SMTP
b) IMAP
c) POP3
d) POP4
40. Where do you configure an Adapter?
a) Sender Agreement
b) Receiver Determination
c) Business System
d) Communication Channel
41. Can a JDBC adapter query the database table?
If yes, what are different possibilities?
a) Yes. You can configure sender and receiver communication channels.
A special XML format is defined for content coming from the
Integration Engine. This canonical format enables SQL Insert,
Update, Select, Delete or stored procedure statements to be processed.
A message is always processed in exactly one database transaction.
b) JDBC adapter cannot insert records in the database.
c) We should not insert, update records in the database directly.
42. The message monitoring status DLNG means ?
a) DLNG = Delivering.
b) DLNG = Dialing
c) DLNG = Detailing
d) DLNG = Dismantling
43. Where do you perform Content Based Routing?
a) Receiver Determination
b) Receiver Agreement
c) Sender Agreement
d) Communication Channel
44. What are the various supported mapping types?
a) Message Mapping, Java Mapping, XSLT Mapping, ABAP Mapping.
b) XSLT, Java, JDBC, JMS
c) XSLT, WSDL, XSD
45. With respect to ABAP proxies,
what are the methods that can be coded?
a) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCHRONOUS.
b) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCH.
c) EXECUTE_SYNCH, EXECUTE_ASYNCH
46. Fields under a node with a minoccurs of ZERO has been mapped.
The values dont appear in the target result, what could be wrong?
a) The parent node has not been assigned.
b) Parent node has cardinality 0 unbounded
c) Parent node has many fields
47. What is a SENDER COMM CHANNEL?
a) Sender Communication Channel is where you define the source system from
where the message/information goes to XI and also the adapter, the Sender System uses.
b) Sender Communication Channel is where you define the target system from where
the message/information goes out of XI and also the adapter, the Receiver System uses.
c) Sender Communication Channel is where you define the how the
interface mapping takes place between Sender and Receiver.
48. XSLT is supported but two statements were not supported. What are they?
a) <xsd:include>, <xsd:import>
b) <xsd:including>, <xsd:importing>
c) <xsd:includes>, <xsd:imports>
d) All statements are supported.
49. What steps can be inserted in an Exception branch?
a) Terminate a process, trigger an alert.
b) Terminate the interface, trigger IDOC.
c) Terminate exception, branch integration process.
50. What is multi mapping? When can it be used?
a) Multi Mapping is used to map abstract interfaces and can only be used in ccBPM.
b) Can be used when there are multiple interfaces from Sender systems.
c) Can be used when there are multiple interfaces from Receiver systems
51. The first step in the Integration process can be ?
a) Receive step
b) fork Step
c) Send Step
d) Block Step
52. An Exception raised by a step can be handled by ?
a) Only by exception handler in the same step
b) Only by exception handler in the outer step
c) By exception handler in the same step or in the outer step
53. An exception is raised by ?
a) Async or sync send step, transformation step and Control Step
b) Sync send step
c) By control step only
54. A message can be received by ?
a) Only a receive step
b) By receive, fork or loop step
c) By receive and block step
d) By send, block and Fork
55. What are the types of containers ?
a) Abstract
b) Simple & Abstract
c) Simple, Abstract and receiver
56. Which of these are true/false with user defined functions?
a) User defined functions are accessible only in the mapping where they are created
b) User defined functions are visible across namespace
c) User defined functions accessed in other mapping by copying it to that mapping
d) User defined functions are accessible in any mapping in a software component version
57. Java Mapping is executed by implementing the interface ?
a) com.sap.aii.mapping.api.StreamTransformation
b) com.sap.api.mapping.StreamTransformation
c) com.sap.api.mapping.aii.StreamTransformation
d) com.sap.mapping.api.StreamTransformation
58. An Idoc has been sent by a sender system to XI, but the idoc is not
received at the XI system which of these could be true/false ?
a) The destination system from the sender system to XI is not configured correctly.
b) The metadata in XI was copied/generated from the sender Idoc is corrupted
c) The destination system from XI to sender system is not defined correctly
d) Sender channel is not configured
59. While mapping which of these is true ? Can I use different mapping ?
a) You can use only one mapping at a time
b) You can use ABAP & JAVA mapping
c) You can use any mapping in any sequence any number of times
d) Different mapping cant be used together
60. To import the metadata from an R/3 system which of this is true/false ?
a) The import permitted in Software component need to be selected
b) You have to create ALE Name in SLD
c) You need to login to the destination (R/3) with a valid user
d) You need to login to destination(R/3) with a User having administrator rights
61. You are implementing XI for your customer, you have very good experience
working in ABAP. While mapping you want to do it in abap, but the option
available are only Message Mapping Java Mapping What would you do to
add the ABAP Mapping option. Where would you configure it?.
a) In Exchange profile
b) In s/w component
c) In Integration Repository
62. From the WSDL description from application server, you can generate ?
a) Java Proxies only
b) ABAP proxies
c) Java and ABAP proxies.
63. JMS adapter can be used for ?
a. IBM web sphere MQ
b. Sonique
c. Web services
64. Which of the following is true/false about HTTP plain adapters?
a. Sender channel is not required to be configured
b. Receiver channel is not required to be configured
c. Using this system can directly connect to integration server
65. You would install Adapter engine de-centrally ?
a. To install PCK
b. To monitor the messages de-centrally
c. To share load with the central adapter engine and increase performance.
66. To Receive the data using Select with JDBC adapter you would ?
a. You would configure a receiver channel
b. you would configure a sender channel
67. You find that the status in transaction SXI_CACHE is
not equal to 0. Which of the following would you perform?
a. Check the condition of BP in Integration Repository
b. Activate the BP in SXI_CHACHE.
c. Activate the BP in Integration Directory
68. Which are the methods that you need to call compulsorily in java mapping ?
a) execute(), setParameter()
b) Exit() Systemproperties()
c) Execute(), SetProperties()
69. What is the relationship between an integration process and business workflow?
a) The Business Process Engine is the same as the Workflow Engine.
b) The Business Process Engine needs external Workflow Engine
c) Business Process Engine is a new name for Workflow Engine
70. What are the different types that a container element can be based on?
a) Simple XSD types : XSD:DATE, XSD:TIME, XSD: INTEGER, XSD: STRING
b) Abstract Integer
c) Receiver
71. Which of the following is true with regards to Container Elements?
a) Elements of a super container are visible in sub container.
b) Elements of sub container are visible in super container
c) Container cannot have super or sub containers
d) Containers can have multiple elements.
72. Send message within an integration process to 8 receivers
at the same time, how can I do this?
a) Create a FORK statement with 8 branches
b) Create 8 interfaces
c) Create a loop with 8 interfaces
d) Create 8 branches
73. Which of the following Objects can be used in BPM ?
a) Context Object
b) Receiver Determination
c) Message Mapping
d) Interface Mapping
74.Could multiple instances of Integration process run at the same time ?
a) Yes
b) No
75. For ABAP mapping which of the following settings have to be done in Exchange Profile ?
a) Com.sap.aii.repository.mapping.additionaltypes = R3_ABAP | Abap-class; R3_XSLT | XSL
b) Com.sap.aii.repository.mapping.additionaltypes = R3_JAVA | Abap-class; R3_XSLT | XSL
c) Com.sap.aii.repository.mapping.additionaltypes = | Abap-class; R3_XSLT | XSL
76. How does Boolean functions work in message mappings ?
a) Boolean functions accept Boolean inputs and result in Boolean values
b) Boolean functions accept Boolean inputs and result in decimal values
c) Boolean functions accept Boolean inputs and result in alphanumeric values
77. While testing message mapping the source message occurs 3 times
but the target message occurs only once? What can be the reason ?
a) Target cardinality is not defined sufficiently
b) Source cannot repeat
c) Message mapping cannot handle multiple values
78. What JAR file is required to perform Java mapping ?
a) aii_map_api.jar
b) aii_map_api.java
c) aii_map_aii.jar
d) None
79. Collaboration Agreement is made of the following ?
a) Sender Agreement, Receiver Agreement
b) Sender Agreement, Sender Communication Channel
c) Sender Agreement, Receiver Communication Channel
d) Receiver Agreement, Receiver Communication Channel
80.What are the three IDOC related transactions in XI ?
a) IDX9
b) IDX1
c) IDX2
d) IDX5
e) IDX3
81.Is EOIO supported by RFC ?
a) YES
b) NO
82. Java Web Start is used for ?
a) Caching Java applications
b) to write Java code
c) to execute Java mapping
d) to perform JMS connectivity
83. Where do you define Usage Dependency?
a) Integration Repository
b) Integration Directory
c) SLD
d) Enterprise Portal
84. For ABAP mapping which class must be implemented ?
a) IF_MAPPING
b) IF_MAPPING_ABAP
c) MAPPING_ABAP
d) MAPPING_EXECUTE_ABAP
85.Component Monitoring in the RWB is used to display
the monitoring of the following components?
a) Integration Engine
b) Adapter Engine
c) Integration Directory
d) Integration Repository
e) Runtime Workbench
86.Does HTTP adapter support QoS BE?
a) Yes
b) No
87.IDOC adapter supports the following QoSs?
a) EO
b) EOIO
c) BE
d) All the above
88.The Client has decided to user HTTP adapter as Sender.
Which transaction should be used to configure the HTTP adapter?
a) SICF
b) SMICM
c) SM59
d) SE80
89.The following transaction is used to monitor XML messages in XI ?
a) SXMB_MONI
b) SM59
c) SXMB_ADM
d) SICF
90.File adapter has the following QoS?
a) BE
b) EO
c) EOIO
d) BEIO
91.When FILE adapter as Sender, we do not need Sender agreement ?
a) Yes
b) No
92. File Sender communication channel can be used by only one Sender agreement ?
a) True
b) False
93. SOAP adapter uses the following message protocol:?
a) SOAP 1.1
b) SOAP 1.2
c) SOAP 1.9
d) SOAP 1.3
94. Using the following URL we can display the content of CPACache?
a) http://<host>:<J2EEport >/CPACache
b) http://<host>:<J2EEport >/AdapterCache
c) http://<host>:<J2EEport >/CPACatch
d) http://<host>:<J2EEport >/CPACache/index.html
95. The following URL can be used to display the Adapter Status in XI ?
a) http://<host>:<J2EEport >/AdapterFramework
b) http://<host>:<J2EEport >/AdapterFramework/RFC
c) http://<host>:<J2EEport >/AdapterFramework/rep
d) http://<host>:<J2EEport >/AdapterStatus
96. Which security role need to be assigned to access the CPACache ?
a) xi_af_cpa_monitoring
b) xi_af_cache_monitor
c) xi_af_cpa_monitor
97. The following URL can be used to manually refresh the CPACache?
a) http://<host>:<J2EEport >/CPACache/refresh=delta
b) http://<host>:<J2EEport >/CPACache/refresh?mode=full
c) http://<host>:<J2EEport >/CPACache/refresh?mode=all
98. The Objects from repository are accessed from directory using user?
a) XIDIRUSER
b) XISUPER
c) XIAPPLUSER
d) XIADMIN
99. Information about the central and decentral Adapter
Framework installations is maintained in ?
a) SLD
b) CLD
c) IR
d) ID
100. Special drivers required for JDBC, JMS adapters can be deployed using ?
a) SPM (Software Procurement Manager)
b) SDM (Software Deployment Manager)
c) SCM (Software Change Manager)
d) SOM (Software Ownership Manager)Hi guys ,
This is SuryaNarayana . I have collected some faqs from www.**************** but they have no answers please answers these questions
Questions are releated in to XI-BPM
1. Business Process Management is concerned with ?
a. Processes within and across applications
b. Planned or spontaneous Human interaction
c. Automating, streamlining, managing business processes
d. Moving process control from application to technology layer
e. All of the above
2. Which open modeling standard ccBPM adheres to?
a. BPEL
b. XML
c. WSDL
d. None of these
3. High-Tech industry ccBPM implementation guidelines are known as ?
a. RosettaNet Implementation Framework
b. CIDX
c. Marketpalce
d. SAP BC
4. Individual "Swim Lane" in BPM modelling contains ?
a. Business Scenarios from same company
b. Business Scenarios from same Application
5. Different Panes within BPM editor in IR ?
a. Header
b. Editing
c. Process Overview
d. Property
e. Output
f. Object
g. All of the above
6. Data Declaration of the Business process can be viewed in ?
a. Correlation in Object area
b. Container in Output area
c. Container in Object area
d. None of these
7. Which of these is not Messaging relevant Step type ?
a. Receive
b. Send
c. Transformation
d. Receiver Determination
e. Block
8. Control Step can be used for, except ?
a. Terminate current process
b. Trigger an Exception
c. Trigger an Alert
d. Define different processing braches for process
9. Which of the following triggers process to start?
a. By receiving amessage assinged to receive step
b. Batch job by scheduling in WAS
c. Both of these
d. None of these.
10. To route response messages to the
correct process instance, _______ object is used ?
a. Correlation
b. Interface
c. Adapter
d. Mapping
11. Correlation handling is handled by ?
a. BP engine
b. Integration Engine
c. Adapter Engine
d. None of these
12. Container element can be typecasted to, except ?
a. simple XSD/XML Schema
b. Abstract i/f
c. Receiver
d. Multilne(vector)
e. Sender
13. Outer Container block has container element 'O' and inner Container block
has container element 'I'. Then which of the following is true?
a. Both 'O' and 'I' are visible in outer block.
b. Both 'O' and 'I' are visible in inner block.
c. Both of these.
d. None of these.
14. Simple Fork process step terminates when ?
a. All branches are true.
b. All branches are false.
c. Either true.
d. Either false.
15. Collect process pattern types includes ?
a. Condition
b. Receiver message
c. Append message
d. Increase counter
e. Merge message
f. Send message
g. All
XI-Releated questions
1. SAP XI is an Integration technology and platform?
a) for SAP and non SAP applications.
b) for A2A and B2B scenarios
c) for asynchronous and synchronous applications
d) for cross-component Business Process Management.
2. XI represents the following layer in the NetWeaver stack:?
a) People Integration
b) Information Integration
c) Process Integration
3. XI uses the following web standards ?
a) WSDL
b) XSD
c) SOAP
4. XI components include?
a) SLD (System Landscape Directory)
b) Integration Builder
c) Integration Server
d) Central Monitoring
e) Adapter Engine
5. Integration Builder is a?
a) Java application
b) ABAP application
c) .NET application
6. Java Web Start is required for?
a) Caching java clients
b) Drawing pictures
c) Connect to SUN systems
7. SLD is a?
a) Client application
b) Server application
8. XI is technically a client of SLD?
a) TRUE
b) FALSE
9. SLD adheres to?
a) Common Information Model
b) Web Services Definition Language
c) XML Schema Definition Language
d) XML
10. Usage of PCK (Partner Connectivity Kit) ?
a) Allow small partners and subsidiaries to communicate natively with XI
b) For Partners to connect to database systems7444
c) Allow Partners to connect to .NET and Java applications
11. Certain adapters are needed in cases where the Integration Server
is to exchange messages with an R/3 system based on basis kernel lower than?
a) 6.10
b) 6.20
c) 6.40
d) 4.5
12. XI supports the following QoS (Quality of Services)?
a) BE (Best Effort)
b) Exactly Once (EO)
c) Exactly Once In Order (EOIO)
d) Exactly Twice In Order (ETIO)
13. QoS BE is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
14. QoS EO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
15. QoS EOIO is equal to ?
a) Synchronous RFC (sRFC)
b) Asynchronous RFC (aRFC)
c) Transactional RFC (tRFC)
d) Queued RFC (qRFC)
16. Adapter Framework is based on ?
a) JCA (Java Connector Architecture)
b) NCA (.NET Connector Architecture)
c) PCK (Partner Connectivity Kit)
d) WSDL (Web Services Definition Language)
17. XI Adapter Engine is based on the integrated?
a) ABAP engine
b) J2EE engine
c) .NET engine
d) JCA (Java Connector Architecture)
18. Integration Processes are built using?
a) WSDL (Web Services Definition Language)
b) BPEL (Business Process Execution Language)
c) XSD (XML Schema Definition Language)
d) JCL (Java Connector Language)
19. Runtime Workbench in XI is the central monitoring tool for the following?
a) Component Monitoring
b) Message Monitoring
c) End-to-End Monitoring
d) Performance Monitoring
e) Queue Monitoring
f) Schedule Monitoring
20. XI uses enhanced version of SOAP protocol called?
a) XI XML
b) XI SOAP
c) XI XSD
d) XI PML
21. What is the cardinality of MESSAGE TYPES : DATA TYPES ?
a) 1:1
b) 2:1
c) 2:2
d) 1:0
22. What are the advantages of ASYNCHRONOUS updates?
a) Acknowledgement can be sent back
b) Messages can be persisted.
23. What are the advantages of SYNCHRONOUS updates?
a) Acknowledgement can be sent back (messages can be persisted with additional configuration)
b) Messages can be persisted.
c) Messages cannot be persisted.
24. What is the Message format used in XI for processing?
a) Specific implementation of SOAP which is XI XML
b) JMS
c) RFC
d) CIDX
25. What is an Adapter?
a) Adapters are used to communicate to Legacy or SAP systems with WAS version < 6.2
b) Adapters are used to retrieve information from Java, .NET systems
c) Adapters are used to import IDOC, RFC information.
26. In the Integration Repository, what is the KEY of an
object or how can an object be uniquely identified?
a) SWCV, Namespace, Name
b) Namespace, Name, Description
c) Name, Description, SWCV
d) SWCV, SWCV1, SWCV2
27. How do you classify NAME SPACE in an R/3 Environment?
a) Equivalent to function group
b) Equivalent to development class
c) Equivalent to function module
d) Equivalent to BAPI
28. What is ICM?
a) Internet Console Manager
b) Internet Communication Manager
c) Infrastructure Communication Manager
d) Intranet Communication Manager
29. A Customer has WAS 6.2 and has decided to use XI?
a) He cannot use XI unless WAS 6.2 is upgraded to WAS 6.4
b) Can use XI with some additional patches
c) WAS 6.2 already has XI in it. No need of any additional software
30. What is the name space of an IDOC?
a) urn:sap-com:document:sap:idoc:messages
b) urn:sap-com:document:idoc:sap:messages
c) urn:sap-com:sap.document:idoc:messages
d) urn:sap-com:document:idoc:messages
31. What is the name space of an RFC ?
a) urn:sap-com:document:rfc:sap:functions
b) urn:sap-com:document:bapi:rfc:functions
c) urn:sap-com:document:sap:rfc:functions
d) urn:sap-com:document:remote:rfc:functions
32. What doesnt get transported when the configuration is released?
a) All Objects will get transported
b) Generated proxies and application coding in the application
components does not get transported when the configuration is released.
c) Only application coding will not get transported.
d) Only generated proxies will not get transported.
33. How many Pipelines are there in the integration server?
a) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding, Call Adapter, Request Message Mapping.
b) Receiver Identification, Interface Identification, Message Branch,
Request Message Mapping, Outbound Binding.
c) Message Branch, Request Message Mapping, Outbound Binding,
Call Adapter, Request Message Mapping.
34. What are the possible Trace Levels?
a) 0 No Trace,1 Low Trace Level,2 Medium Trace Level,
3 High Trace Level,4 Expert Trace Level
b) 0 No Trace,1 Low Trace Level,
2 Medium Trace Level,3 High Trace Level
c) 10 Low Trace Level,20 Medium Trace Level,
30 High Trace Level,40 Expert Trace Level
35. Does JMS adapter need additional driver to communicate to database?
a) Yes
b) No
c) JMS adapter is not available in XI
36. What is use of PCK?
a) Partner Connectivity Kit that helps Partner Systems with no ability
to communicate in XML speak to the Business Systems.
b) PCK is used to deploy additional drivers
c) PCK can be used as an alternative to XI
37. What is Context Object? What is its role?
a) Context Objects are pointers to a specific element within the message,
for future reference. Encapsulate the access to data that is contained
in the payload or in the header of the message.
b) Another form of data types
c) Can be used instead of message types
38. What adapters dont need Sender Agreement?
a) HTTP, IDOC.
b) IDOC, RFC
c) IDOC, JMS
d) JDBC, JMS
39. What is the Protocol followed for Mail Adapter?
a) SMTP
b) IMAP
c) POP3
d) POP4
40. Where do you configure an Adapter?
a) Sender Agreement
b) Receiver Determination
c) Business System
d) Communication Channel
41. Can a JDBC adapter query the database table?
If yes, what are different possibilities?
a) Yes. You can configure sender and receiver communication channels.
A special XML format is defined for content coming from the
Integration Engine. This canonical format enables SQL Insert,
Update, Select, Delete or stored procedure statements to be processed.
A message is always processed in exactly one database transaction.
b) JDBC adapter cannot insert records in the database.
c) We should not insert, update records in the database directly.
42. The message monitoring status DLNG means ?
a) DLNG = Delivering.
b) DLNG = Dialing
c) DLNG = Detailing
d) DLNG = Dismantling
43. Where do you perform Content Based Routing?
a) Receiver Determination
b) Receiver Agreement
c) Sender Agreement
d) Communication Channel
44. What are the various supported mapping types?
a) Message Mapping, Java Mapping, XSLT Mapping, ABAP Mapping.
b) XSLT, Java, JDBC, JMS
c) XSLT, WSDL, XSD
45. With respect to ABAP proxies,
what are the methods that can be coded?
a) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCHRONOUS.
b) EXECUTE_SYNCHRONOUS, EXECUTE_ASYNCH.
c) EXECUTE_SYNCH, EXECUTE_ASYNCH
46. Fields under a node with a minoccurs of ZERO has been mapped.
The values dont appear in the target result, what could be wrong?
a) The parent node has not been assigned.
b) Parent node has cardinality 0 unbounded
c) Parent node has many fields
47. What is a SENDER COMM CHANNEL?
a) Sender Communication Channel is where you define the source system from
where the message/information goes to XI and also the adapter, the Sender System uses.
b) Sender Communication Channel is where you define the target system from where
the message/information goes out of XI and also the adapter, the Receiver System uses.
c) Sender Communication Channel is where you define the how the
interface mapping takes place between Sender and Receiver.
48. XSLT is supported but two statements were not supported. What are they?
a) <xsd:include>, <xsd:import>
b) <xsd:including>, <xsd:importing>
c) <xsd:includes>, <xsd:imports>
d) All statements are supported.
49. What steps can be inserted in an Exception branch?
a) Terminate a process, trigger an alert.
b) Terminate the interface, trigger IDOC.
c) Terminate exception, branch integration process.
50. What is multi mapping? When can it be used?
a) Multi Mapping is used to map abstract interfaces and can only be used in ccBPM.
b) Can be used when there are multiple interfaces from Sender systems.
c) Can be used when there are multiple interfaces from Receiver systems
51. The first step in the Integration process can be ?
a) Receive step
b) fork Step
c) Send Step
d) Block Step
52. An Exception raised by a step can be handled by ?
a) Only by exception handler in the same step
b) Only by exception handler in the outer step
c) By exception handler in the same step or in the outer step
53. An exception is raised by ?
a) Async or sync send step, transformation step and Control Step
b) Sync send step
c) By control step only
54. A message can be received by ?
a) Only a receive step
b) By receive, fork or loop step
c) By receive and block step
d) By send, block and Fork
55. What are the types of containers ?
a) Abstract
b) Simple & Abstract
c) Simple, Abstract and receiver
56. Which of these are true/false with user defined functions?
a) User defined functions are accessible only in the mapping where they are created
b) User defined functions are visible across namespace
c) User defined functions accessed in other mapping by copying it to that mapping
d) User defined functions are accessible in any mapping in a software component version
57. Java Mapping is executed by implementing the interface ?
a) com.sap.aii.mapping.api.StreamTransformation
b) com.sap.api.mapping.StreamTransformation
c) com.sap.api.mapping.aii.StreamTransformation
d) com.sap.mapping.api.StreamTransformation
58. An Idoc has been sent by a sender system to XI, but the idoc is not
received at the XI system which of these could be true/false ?
a) The destination system from the sender system to XI is not configured correctly.
b) The metadata in XI was copied/generated from the sender Idoc is corrupted
c) The destination system from XI to sender system is not defined correctly
d) Sender channel is not configured
59. While mapping which of these is true ? Can I use different mapping ?
a) You can use only one mapping at a time
b) You can use ABAP & JAVA mapping
c) You can use any mapping in any sequence any number of times
d) Different mapping cant be used together
60. To import the metadata from an R/3 system which of this is true/false ?
a) The import permitted in Software component need to be selected
b) You have to create ALE Name in SLD
c) You need to login to the destination (R/3) with a valid user
d) You need to login to destination(R/3) with a User having administrator rights
61. You are implementing XI for your customer, you have very good experience
working in ABAP. While mapping you want to do it in abap, but the option
available are only Message Mapping Java Mapping What would you do to
add the ABAP Mapping option. Where would you configure it?.
a) In Exchange profile
b) In s/w component
c) In Integration Repository
62. From the WSDL description from application server, you can generate ?
a) Java Proxies only
b) ABAP proxies
c) Java and ABAP proxies.
63. JMS adapter can be used for ?
a. IBM web sphere MQ
b. Sonique
c. Web services
64. Which of the following is true/false about HTTP plain adapters?
a. Sender channel is not required to be configured
b. Receiver channel is not required to be configured
c. Using this system can directly connect to integration server
65. You would install Adapter engine de-centrally ?
a. To install PCK
b. To monitor the messages de-centrally
c. To share load with the central adapter engine and increase performance.
66. To Receive the data using Select with JDBC adapter you would ?
a. You would configure a receiver channel
b. you would configure a sender channel
67. You find that the status in transaction SXI_CACHE is
not equal to 0. Which of the following would you perform?
a. Check the condition of BP in Integration Repository
b. Activate the BP in SXI_CHACHE.
c. Activate the BP in Integration Directory
68. Which are the methods that you need to call compulsorily in java mapping ?
a) execute(), setParameter()
b) Exit() Systemproperties()
c) Execute(), SetProperties()
69. What is the relationship between an integration process and business workflow?
a) The Business Process Engine is the same as the Workflow Engine.
b) The Business Process Engine needs external Workflow Engine
c) Business Process Engine is a new name for Workflow Engine
70. What are the different types that a container element can be based on?
a) Simple XSD types : XSD:DATE, XSD:TIME, XSD: INTEGER, XSD: STRING
b) Abstract Integer
c) Receiver
71. Which of the following is true with regards to Container Elements?
a) Elements of a super container are visible in sub container.
b) Elements of sub container are visible in super container
c) Container cannot have super or sub containers
d) Containers can have multiple elements.
72. Send message within an integration process to 8 receivers
at the same time, how can I do this?
a) Create a FORK statement with 8 branches
b) Create 8 interfaces
c) Create a loop with 8 interfaces
d) Create 8 branches
73. Which of the following Objects can be used in BPM ?
a) Context Object
b) Receiver Determination
c) Message Mapping
d) Interface Mapping
74.Could multiple instances of Integration process run at the same time ?
a) Yes
b) No
75. For ABAP mapping which of the following settings have to be done in Exchange Profile ?
a) Com.sap.aii.repository.mapping.additionaltypes = R3_ABAP | Abap-class; R3_XSLT | XSL
b) Com.sap.aii.repository.mapping.additionaltypes = R3_JAVA | Abap-class; R3_XSLT | XSL
c) Com.sap.aii.repository.mapping.additionaltypes = | Abap-class; R3_XSLT | XSL
76. How does Boolean functions work in message mappings ?
a) Boolean functions accept Boolean inputs and result in Boolean values
b) Boolean functions accept Boolean inputs and result in decimal values
c) Boolean functions accept Boolean inputs and result in alphanumeric values
77. While testing message mapping the source message occurs 3 times
but the target message occurs only once? What can be the reason ?
a) Target cardinality is not defined sufficiently
b) Source cannot repeat
c) Message mapping cannot handle multiple values
78. What JAR file is required to perform Java mapping ?
a) aii_map_api.jar
b) aii_map_api.java
c) aii_map_aii.jar
d) None
79. Collaboration Agreement is made of the following ?
a) Sender Agreement, Receiver Agreement
b) Sender Agreement, Sender Communication Channel
c) Sender Agreement, Receiver Communication Channel
d) Receiver Agreement, Receiver Communication Channel
80.What are the three IDOC related transactions in XI ?
a) IDX9
b) IDX1
c) IDX2
d) IDX5
e) IDX3
81.Is EOIO supported by RFC ?
a) YES
b) NO
82. Java Web Start is used for ?
a) Caching Java applications
b) to write Java code
c) to execute Java mapping
d) to perform JMS connectivity
83. Where do you define Usage Dependency?
a) Integration Repository
b) Integration Directory
c) SLD
d) Enterprise Portal
84. For ABAP mapping which class must be implemented ?
a) IF_MAPPING
b) IF_MAPPING_ABAP
c) MAPPING_ABAP
d) MAPPING_EXECUTE_ABAP
85.Component Monitoring in the RWB is used to display
the monitoring of the following components?
a) Integration Engine
b) Adapter Engine
c) Integration Directory
d) Integration Repository
e) Runtime Workbench
86.Does HTTP adapter support QoS BE?
a) Yes
b) No
87.IDOC adapter supports the following QoSs?
a) EO
b) EOIO
c) BE
d) All the above
88.The Client has decided to user HTTP adapter as Sender.
Which transaction should be used to configure the HTTP adapter?
a) SICF
b) SMICM
c) SM59
d) SE80
89.The following transaction is used to monitor XML messages in XI ?
a) SXMB_MONI
b) SM59
c) SXMB_ADM
d) SICF
90.File adapter has the following QoS?
a) BE
b) EO
c) EOIO
d) BEIO
91.When FILE adapter as Sender, we do not need Sender agreement ?
a) Yes
b) No
92. File Sender communication channel can be used by only one Sender agreement ?
a) True
b) False
93. SOAP adapter uses the following message protocol:?
a) SOAP 1.1
b) SOAP 1.2
c) SOAP 1.9
d) SOAP 1.3
94. Using the following URL we can display the content of CPACache?
a) http://<host>:<J2EEport >/CPACache
b) http://<host>:<J2EEport >/AdapterCache
c) http://<host>:<J2EEport >/CPACatch
d) http://<host>:<J2EEport >/CPACache/index.html
95. The following URL can be used to display the Adapter Status in XI ?
a) http://<host>:<J2EEport >/AdapterFramework
b) http://<host>:<J2EEport >/AdapterFramework/RFC
c) http://<host>:<J2EEport >/AdapterFramework/rep
d) http://<host>:<J2EEport >/AdapterStatus
96. Which security role need to be assigned to access the CPACache ?
a) xi_af_cpa_monitoring
b) xi_af_cache_monitor
c) xi_af_cpa_monitor
97. The following URL can be used to manually refresh the CPACache?
a) http://<host>:<J2EEport >/CPACache/refresh=delta
b) http://<host>:<J2EEport >/CPACache/refresh?mode=full
c) http://<host>:<J2EEport >/CPACache/refresh?mode=all
98. The Objects from repository are accessed from directory using user?
a) XIDIRUSER
b) XISUPER
c) XIAPPLUSER
d) XIADMIN
99. Information about the central and decentral Adapter
Framework installations is maintained in ?
a) SLD
b) CLD
c) IR
d) ID
100. Special drivers required for JDBC, JMS adapters can be deployed using ?
a) SPM (Software Procurement Manager)
b) SDM (Software Deployment Manager)
c) SCM (Software Change Manager)
d) SOM (Software Ownership Manager)
Maybe you are looking for
-
From where can I download sample warehouse_inventory.xsd
From where can I download following sample files: There is no file (from the files below) on this location http://www.oracle.com/technology/products/reports/index.html Examples\XML_PDS\result\inventory_report.pdf The final PDF version of the paper re
-
When I open Firefox 4 from either the icon or from a link from e-mail or some other place, multiple windows open up. Usually between 15 and 25 of them. I'm running Windows 7 Ultimate on both my laptop and desktop and have the same issue with both. I
-
Primary key in Entity Objects. How?
Hi! I'm using Jdeveloper 9.0.3.3. I have a table with primary keys: CliId and Id. I make an entity object and choose primary key option for Cliid and Id in the entity. Now i make an viewObject from the entity object. In the viewObject, there are 2 ke
-
Incomplete information contacts on phone
I have a Nokia C3 and managed my contacts with OVI suite. I have contact who have multiple phonenumbers and mailadresses. Some contacts only show the phone numbers and 1 mailadres. In Ovi suite however they are complete... How comes i only see half o
-
How to download new firmware/software for iPod classic
This may get complicated..My iPod Classic 120GB has served me well at my restaurant in Mexico as my pimary music source. During my absence, my manager's son (age 12) decided to "get" my music into his computer. I know he has a PC (I have Mac's)..almo