Regarding File to JDBC/MS Access database

Hi all,
I am trying to insert some values in to MS access database table.I kept the .mdb file in the local PI folder.I am getting connection error
com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//test/data/input/Employee.mbd': SAPClassNotFoundException: jdbc.odbc.JdbcOdbcDriver
i have given the configuration as:
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//test/data/input/Employee.mbd
Please give me some pointers.
Regards,
Anika

Hi Anika,
Also please check for :
You can set the configuration as following:-
JDBC Driver : sun.jdbc.odbc.JdbcOdbcDriver
Connection : jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ= Full Path of DB file;
eg of full path:D:\USERS\Employee\employee.mdb
Please go through these steps: (Assuming you are working on Windows)
1) An ODBC driver for your database must be installed on the Windows computer running the application server.
Check if there's an ODBC driver for MS Acess on the application Server.
2) To connect through an ODBC driver, you must install the Sun JDBC-ODBC Bridge driver on the Windows computer running the application server. The driver comes with the Sun Java 2 SDK, Standard Edition, for Windows.
Also there is another point.
sun.jdbc.odbc.JdbcOdbcDriver
This driver is a part of the JDK kit and so, you need not install the driver on your XI server. Check the SAP Note JDBC FAQ for this info.
3)Define a DSN on the Windows system hosting your application server.
4)These parameters you need to give while configuring the JDBC receiver adapter channel
Regards
joel
Edited by: joel trinidade on Mar 26, 2009 12:45 PM

Similar Messages

Regarding File 2 JDBC Scenario

Hi Friends,
can anybody help me on file 2 jdbc scenario. here my input file is not picked but in moni it is showing black flag. and in message monitoring in adapter engine sender side interface status is successful but receiver side interface status is waiting and i am not getting the output in my database table.please help me one this issue

Hi Uday
Kindly check your server and port whether they are up
go to transaction SM49 and click on PING then in the next string give your server and port address and press F8
you will get the actual status of your server
also
You have to deploy the required JDBC drivers for the database before making connection. Ask the database provider or your vendor for the divers. That should be deployed using SDM tool
Start visual admin of XI and select service "Deploy" and then select option "Deploy and start" to select file and deploy it
now here is the steps to deploy this module.
How to deploy adapter module in production
Three option available:
1. Using SDM
2. Using Visual Admin
3. Using NW development studio (Not available for Production)
We will use Visual Admin Deploy deploy service to deploy EAR file of adapter module.
Steps:
1. Goto VM->Deploy service
2. Select option Deploy and start
3. Select EAR file provided for deployment
4. Restart the service.
5. Done
follow this guide
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/70ffd890-0201-0010-708f-d5dad2dfcf3a
good luck
regards
Sandeep
If helpful kindly reward points
Edited by: sandeep sharma on Apr 19, 2008 7:46 AM

How to save a picture file into Microsoft Access Database?

I want to save a picture file,such example.jpg file into a Microsoft Access Database in JSP,anybody know how to save picture file into Microsoft Access Database and read this picture file from Microsoft Access Database and then show this picture in a JSP page?
Thanks in advance.

Not posible in case of Microsoft Access ..
You will hv to use oracle for that ....
search for Blob / Clob

Migrating multiple access databases to 9i

I have generated several xml files using omwb exporter, from several individual access mdb files. All the access databases have identical structures. But each time I go into omwb and create a source database from an xml file, the previous source disappears and is replaced by the one I just generated. The FAQs say that all sources should appear, but be identical apart from the path. What am I doing wrong?

I forgot to mention Andy,
That one thing I did was to go ahead and migrate my first database to oracle. After that migration was completed, I restarted the migration process for my second database (which was named the same name as the first database in order to have it go to the same user/tablespace).
There were obvious errors since the migration was trying to create the same user and tablespace that already exist because of the first migration. I had to abort the migration while the data was being transferred because the migration workbench was just hanging.
I did check however and the database tables WERE created under the same user and tablespace, but WITHOUT the data. I'm sure I could go in and simply migrate the tables data but there should be an easier mechanism!
I'm thinking that each database will have to be migrated to a different username/tablespaces for now.

Accessing MS Access Database file from Sender JDBC in PI 7.1

Dear Experts,
I am on SAP PI 7.1 SP00. PI Server is installed on LINUX Server.
I am doing an scenario, where i am going to process the .mdb file through Sender JDBC Communication channel . I have put .mdf file in FTP server.
When I check in communication channel Monitoring getting below error :
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//pi_integ/abc.mdb' using the JDBC driver 'jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Can not establish connection:: SQLException: [unixODBC][Driver Manager]Data source name not found, and no default driver specified'
I have seen many blog, but I am helpless. Could you kindly provide your suggestions.
Really appreciated your efforts and your valuable time.
Ahmed.

To connect to an Access Database, I create an ODBC data source and use the "sun.jdbc.odbc.JdbcOdbcDriver".

Creating a new access database using JDBC

Hi Forum,
I have a problem in hand. Let me describe the problem:
I want to create an "access database" from java at runtime. "Access database" is file based, so for a database named test, it will have a file test.mdb.
Now, everything's sweet and wonderful, if somebody creates an "empty access database" at the client machine and i then connect to it and create the tables i require.
But the issue is i want to create the database at runtime (the database name and tables are determined at runtime).
Using the JDBC:ODBC bridge driver , i am able to connect to an existing database, but any "create database" statements are not supported.
A last ditch solution would be that i create an empty database using access and copy the file contents in the SQL server database as a a blob object. Then when i want to create a new access database at runtime, i create a file in a particular folder , with an .mdb
extension, copy the file contents from the SQL server (i also have an SQL server connection) BLOB object, and then try to connect to the
.mdb file.
But this approach seems a "quick hack" and can have problems (which i can't see as of now).
Can you suggest a better alternative for the problem.
See the Java Sun forum at this address for a discussion of a similar problem, but sadly with no solution.
http://forum.java.sun.com/thread.jspa?forumID=31&threadID=484731

I have an applet that was previously connected to Oracle 9i. I am faced with connecting to MS Access temporarily for testing purposes.
I have been unable to successfully code connection in java. I have set up the DSN and can access in SQL Worksheet in JDev.
I saw your question regarding creating an access db, and thought you might be so kind as to help me code the connection to access!!!!
Any help you could provide would be greatly appreciated. I have a huge application to finish with alot of sqlj already completed. Connectivity is not my area of expertise!
Any help you could provide would be greatly appreciated!!!
I am not sure if I have to use bridge? Am I progressing in right direction to migrating to SQL Server if need be?

Regarding MS Access Database details....

Hi,
I am working on RFC to JDBC interface. Currently my Database tables are not created, so planning to do testing on MS Access database. While creating JDBC communication channel, it is asking JDBC driver and Connection details. Could you please provide me the above said details.
Thanks in Advance.
Regards,
sai.

Hi,
For JDBC you first need to install the JDBC drivers on XI:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3867a582-0401-0010-6cbf-9644e49f1a10
Search on SDN with JDBC adapter will give you the details of the parameter.
Refer the below web log:
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30
Thnx
Chirag

File to JDBC - JDBC database not getting updated using UPDATE_INSERT

Hi ,
I have a done a file to JDBC Scenario.File is successfully picked up by sender file channel and recieved by reciever JDBC channel.There is no error in receiver communication channel.I used UPDATE_INSERT action in mapping which has to update the database with all records it recieve.But,i found there is no update in Database table.I donot have access to database,so i made a sender jdbc channel querying all data in it to see what new value is populated.
I made a dummy sender jdbc channel to check what are the values updates on the run of above interface.But , i found no update occur.Please help me out of this problem.
Thanks
Deepak Jaiswal

The reason I ask , because you will see whether the message got successfully delivered to the target system.
I want to see information like below
2010-04-14 14:31:35 Success Message successfully received by messaging system. Profile: XI URL: http://server:port/MessagingSystem/receive/AFW/XI Credential (User): PIISUSER
2010-04-14 14:31:35 Success Using connection JDBC_http://sap.com/xi/XI/System. Trying to put the message into the receive queue.
2010-04-14 14:31:35 Success Message successfully put into the queue.
2010-04-14 14:31:35 Success The message was successfully retrieved from the receive queue.
2010-04-14 14:31:35 Success The message status set to DLNG.
2010-04-14 14:31:35 Success Delivering to channel: Communuication channel
2010-04-14 14:31:35 Success MP: Entering module processor
2010-04-14 14:31:35 Success MP: Processing local module localejbs/CallSapAdapter
2010-04-14 14:31:35 Success Receiver JDBC adapter: processing started; QoS required: ExactlyOnce
2010-04-14 14:31:35 Success JDBC adapter receiver channel CC: processing started; party , service DB_BS
2010-04-14 14:31:35 Success Database request processed successfully
2010-04-14 14:31:35 Success MP: Leaving module processor
2010-04-14 14:31:35 Success The message was successfully delivered to the application using connection JDBC_http://sap.com/xi/XI/System.
2010-04-14 14:31:35 Success The message status set to DLVD.
raj.

How to input sound file into MS Access Database, not random folder?

Hi, I am trying to input a sound file into an MS Access 2000 database, I know it can be copied and pasted into there, but how can u input into the database with a user record, i also need the code to extract it as well as inputting it....at the moment it records the sound and stores it as test.wav on the local drive....
here is my code for my applet do far....
compile this file first....
import java.applet.*;
import java.awt.*;
import java.awt.event.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.*;
import java.io.IOException;
import java.io.File;
import java.net.URL;
import javax.sound.sampled.DataLine;
import javax.sound.sampled.TargetDataLine;
import javax.sound.sampled.AudioFormat;
import javax.sound.sampled.AudioSystem;
import javax.sound.sampled.AudioInputStream;
import javax.sound.sampled.LineUnavailableException;
import javax.sound.sampled.AudioFileFormat;
public class VoicePasswordRecorder extends Thread {
 private TargetDataLine m_line;
 private AudioFileFormat.Type m_targetType;
 private AudioInputStream m_audioInputStream;
 private File m_outputFile;
 public VoicePasswordRecorder(TargetDataLine line,
 AudioFileFormat.Type targetType,
 File file)
 m_line = line;
 m_audioInputStream = new AudioInputStream(line);
 m_targetType = targetType;
 m_outputFile = file;
 /** Starts the recording.
 (i) The line is started,
 (ii) The thread is started,
 public void start()
 /* Starting the TargetDataLine. It tells the line that
 data needs to be read from it. If this method isn't
 called then it won't be able to read data from the line.
 m_line.start();
 /* Starting the thread. This call results in the
 method 'run()'being called. There, the
 data is actually read from the line.
 super.start();
 /** Stops the recording.
 Note that stopping the thread is not necessary. Once
 no more data can be read from the TargetDataLine, no more data
 can be read from the AudioInputStream. The method 'AudioSystem.write()'
 (called in 'run()' returns. Returning from 'AudioSystem.write()'
 is followed by returning from 'run()', and then the thread
 stops automatically.
 public void stopRecording()
 m_line.stop();
 m_line.close();
 /** Main working method.
 'AudioSystem.write()' is called.
 Internally, it works like this: AudioSystem.write()
 contains a loop that is trying to read from the passed
 AudioInputStream. Since there is a special AudioInputStream
 that gets data from a TargetDataLine, reading from the
 AudioInputStream leads to reading from the TargetDataLine. The
 data read this way is then written to the passed File. Before
 writing of audio data starts, a header is written according
 to the desired audio file type. Reading continues until no
 more data can be read from the AudioInputStream. In this case,
 it happens if no more data can be read from the TargetDataLine.
 This happens if the TargetDataLine is stopped. Then,
 the file is closed and 'AudioSystem.write()' returns.
 public void run()
 try
 AudioSystem.write(
 m_audioInputStream,
 m_targetType,
 m_outputFile);
 catch (IOException e)
 e.printStackTrace();
 public static void main(String[] args)
 if (args.length != 1 || args[0].equals("-h"))
 printUsageAndExit();
 /* There is only one command line argument.
 This is taken as the filename of the soundfile
 to store to.
 String strFilename = args[0];
 File outputFile = new File(strFilename);
 /* For simplicity, the audio data format used for recording
 is hardcoded here. The PCM 44.1 kHz, 16 bit signed,
 stereo was used.
 AudioFormat audioFormat = new AudioFormat(
 AudioFormat.Encoding.PCM_SIGNED,
 44100.0F, 16, 2, 4, 44100.0F, false);
 /* Here, the TargetDataLine is being received. The
 TargetDataLine is used later to read audio data from it.
 If requesting the line was successful, it will open it.
 DataLine.Info info = new DataLine.Info(TargetDataLine.class, audioFormat);
 TargetDataLine targetDataLine = null;
 try
 targetDataLine = (TargetDataLine) AudioSystem.getLine(info);
 targetDataLine.open(audioFormat);
 catch (LineUnavailableException e)
 out("unable to get a recording line");
 e.printStackTrace();
 System.exit(1);
 AudioFileFormat.Type targetType = AudioFileFormat.Type.WAVE;
 /* The creation of the VoicePasswordRecorder object.
 It contains the logic of starting and stopping the
 recording, reading audio data from the TargetDataLine
 and writing the data to a file.
 VoicePasswordRecorder recorder = new VoicePasswordRecorder(
 targetDataLine,
 targetType,
 outputFile);
 /* It is waiting for the user to press ENTER to
 start the recording.
 out("Press ENTER to start the recording.\n");
 try
 System.in.read();
 catch (IOException e)
 e.printStackTrace();
 /* Here, the recording is actually started.
 recorder.start();
 out("Recording...\n");
 /* It is waiting for the user to press ENTER,
 this time to signal that the recording should be stopped.
 out("Press ENTER to stop the recording.\n");
 try
 System.in.read();
 catch (IOException e)
 e.printStackTrace();
 /* Here, the recording is actually stopped.
 recorder.stopRecording();
 out("Recording stopped.\n");
 private static void printUsageAndExit()
 out("VoicePasswordRecorder: usage:");
 out("\tjava VoicePasswordRecorder -h");
 out("\tjava VoicePasswordRecorder <audiofile>");
 System.exit(0);
 private static void out(String strMessage)
 System.out.println(strMessage);
import java.awt.*;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.io.*;
import javax.sound.sampled.*;
import javax.swing.*;
public class AppletTest extends JApplet
 implements ActionListener
 public AppletTest()
 comp = null;
 startrecording = null;
 stoprecording = null;
 recorder = null;
 public void init()
 Panel panel = new Panel(new FlowLayout(1));
 comp = new JTextArea(50, 50);
 comp.setPreferredSize(new Dimension(50, 50));
 comp.setEditable(false);
 JButton startrecording = new JButton("Start");
 JButton stoprecording = new JButton("Stop");
 comp.append("Please record your Voice Password...\n");
 GridBagLayout gridbag = new GridBagLayout();
 GridBagConstraints c = new GridBagConstraints();
 getContentPane().setLayout(gridbag);
 c.weightx = 1.0D;
 c.weighty = 1.0D;
 gridbag.setConstraints(comp, c);
 gridbag.setConstraints(panel, c);
 getContentPane().add(comp, c);
 getContentPane().add(panel, c);
 c.weightx = 0.0D;
 c.weighty = 0.0D;
 startrecording.setEnabled(true);
 stoprecording.setEnabled(true);
 startrecording.addActionListener(this);
 gridbag.setConstraints(startrecording, c);
 getContentPane().add(startrecording, c);
 stoprecording.addActionListener(this);
 gridbag.setConstraints(stoprecording, c);
 getContentPane().add(stoprecording, c);
 int width = 300;
 int height = 200;
 setSize(width, height);
 setVisible(true);
 boolean looping = false;
 public void actionPerformed(ActionEvent ae)
 if(ae.getActionCommand().equals("Start"))
 createRecorder();
 recorder.start();
 System.out.println("Start Button Clicked");
 } else
 if(ae.getActionCommand().equals("Stop"))
 recorder.stopRecording();
 System.out.println("Stop Button Clicked");
 private void createRecorder()
 String strFilename = "C:\test.wav";
 File outputFile = new File(strFilename);
 AudioFormat audioFormat = new AudioFormat(javax.sound.sampled.AudioFormat.Encoding.PCM_SIGNED, 44100F, 16, 2, 4, 44100F, false);
 javax.sound.sampled.DataLine.Info info = new javax.sound.sampled.DataLine.Info(javax.sound.sampled.TargetDataLine.class, audioFormat);
 TargetDataLine targetDataLine = null;
 try
 targetDataLine = (TargetDataLine)AudioSystem.getLine(info);
 targetDataLine.open(audioFormat);
 catch(LineUnavailableException e)
 comp.append("unable to get a recording line\n");
 e.printStackTrace();
 System.exit(1);
 javax.sound.sampled.AudioFileFormat.Type targetType = javax.sound.sampled.AudioFileFormat.Type.WAVE;
 recorder = new SimpleAudioRecorder(targetDataLine, targetType, outputFile);
 comp.append("Press ENTER to start the recording.\n");
 try
 System.in.read();
 catch(IOException e)
 e.printStackTrace();
 comp.append("Recording...\n");
 comp.append("Press ENTER to stop the recording.\n");
 try
 System.in.read();
 catch(IOException e)
 e.printStackTrace();
 comp.append("Recording stopped.\n");
 private JTextArea comp;
 private JButton startrecording;
 private JButton stoprecording;
 private SimpleAudioRecorder recorder;
}I intend to use this for verifying the username, password and a voice password over the web....as shown in the following code...
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
<meta http-equiv="Content-Language" content="en-us">
<title>Home Page</title>
<meta name="GENERATOR" content="Microsoft FrontPage 5.0">
<meta name="ProgId" content="FrontPage.Editor.Document">
<meta name="Microsoft Theme" content="artsy 011, default">
<meta name="Microsoft Border" content="tl, default">
</head>
<body background="arttilea.jpg" bgcolor="#000000" text="#FFFFCC" link="#FF9900" vlink="#999900" alink="#669933">

 Please enter login
 details below:
<form>
<table border=0 cellpadding=3 cellspacing=3>
<tr>
 <td align=right width="74">
 Username
 </td>
 <td width="335">
 <input type=text
 name=username size="20">
 </td>
</tr>
<tr>
 <td align=right width="74">
 Password
 </td>
 <td width="335">
 
 <input
 type=password name=password size="20">
 </td>
</tr>
<tr>
 <td align=center width="74">
 Voice
 Password Check
 </td>
 <td width="335">
 
<APPLET CODE="AppletTest.class" ALIGN="MIDDLE" WIDTH=272 HEIGHT=38 NAME="AppletTest.class"></APPLET> 
 </td>
</tr>
<tr>
 <td colspan=2 align=center>
 <input type=submit value="Enter Website" name="Submit">
 </td>
</tr>
</table>
</form>
 This page was last updated on 25/03/04.
</body>
</html>I will be very grateful if somebody could help me out....as this is my first time at java programming ....also my first time for using this forum!
Thanks,
Regards,
Mayur Patel

Hi
I Learned how to read a file text and Parse as StringTokenizer. But still i don't know how to read the Individual tokens into to database.
But now i face a new Problem, i am not able to sort it out.
i am posting my code
import java.io.FileReader;
import java.io.FileWriter;
import java.io.BufferedReader;
import java.io.PrintWriter;
import java.io.IOException;
import java.io.*;
import java.util.*;
public class CSVExample {
 public static void main(String[] args) throws IOException {
 BufferedReader inputStream = null;
 PrintWriter outputStream = null;
 try {
 inputStream = new BufferedReader(new FileReader("file.csv"));
 String text;
 while((text=inputStream.readLine())!= null)
 StringTokenizer st = new StringTokenizer(text);
 if(st.hasMoreTokens())
 System.out.println(st.nextToken());
 } finally {
 if (inputStream != null) {
 inputStream.close();
}Here the Problem is The file.csv has got two fields ID, NAME The content of this file is as follows
T12,MR.RAJ KUMAR
T13,MR.EARNEST DIES
T14,MR.MATHEW HYDEN
Now when i StringTokenize this File The Output printed as follows
T12,MR.RAJ
T13,MR.EARNEST
T14,MR.MATHEW
That means when it finds the Space it is not printing the Remaining Text.
Please Help me in this and then Tell me how to INSER The Tokens into the Database Table
Thank you for your service
Cheers
Jofin

Size limit of access database with image files stored outside database

I have read 2GB limit on size of Access database. We are using Access 2013 database with fields that are data type attachment and storing attached images outside the database. Does the size of the folder that is holding these images count
in any way toward 2GB size limit?

Hi,
As far as I know, Access database limit size 2GB based on itself, not related to the folder size. Attachment data
type is similar to attaching files to e-mail messages. We need to control the Access database size is smaller then 2GB.
When a field is defined with the attachment data type, you can store one or more files for each record in it.
Attachments can dramatically increase the size of the database, but since the attached file is stored as a part of the dabatbase, you are not dependent on network drives being available as you would be if you inculded a hyperlink to the file. As a matter of
fact, feel free to backup the origainal file to other disk after you attach it to the database.
Regards,
George Zhao
TechNet Community Support

Why is the Microsoft Office Access Database Engine data source looking for a workgroup information file?

While trying to import to MSSQL2012 from SSDT using the wizard from an Access 2013 DB (.accdb) which is password protected, I get the following error with the username blank and the password field correctly populated:
Cannot start your application. The workgroup information file is missing or opened exclusively by another user. (MicrosoftOffice Access Database Engine)
But according to this link:
http://office.microsoft.com/en-us/access-help/what-happened-to-user-level-security-HA010342116.aspx
MSA10 and beyond shouldn't need workgroup information files, although it's not clear to me if they are
created/used or not.
I can point the wizard to some local version of system.mdw at Advanced -> All -> Jet OLEDB:System Database, and then the error becomes:
Not a valid account name or password. (Microsoft Office Access Database Engine)
for any username I can think of.
Questions:
1. Why does this data source insist on looking for a workgroup information file even though user-level security should be disabled?
2. Why does the Open dialog box for the Microsoft Access Database Engine have *.mdb as the only selectable filetype?
3. How can I get around these errors for an .accdb that is password protected?
Thanks!

Hi JordanPG,
To connect to Access 2007 or later database, we need the Microsoft ACE 12.0 OLE DB driver. SQL Server only installs the Microsoft Jet 4.0 OLE DB driver which can be used to connect to Access 2003 or earlier database. Besides, the Microsoft Jet 4.0 OLE DB
driver only has 32-bit version, but the Microsoft ACE 12.0 OLE DB driver has both 32-bit and 64-bit version. However, the 32-bit and 64-bit Microsoft ACE 12.0 OLE DB drivers cannot be installed on a single server.
According to your description, you can use the 64-bit SQL Server Import and Export Wizard to load data from the Access database, so the 64-bit Microsoft ACE 12.0 OLE DB driver is installed on your computer. Since the BIDS/SSDT is a 32-bit application, the
64-bit Microsoft ACE 12.0 OLE DB Provider is not visible in BIDS/SSDT. So, when you said that you select “Microsoft Access (Microsoft Access Database Engine)" in the SQL Server Import and Export Wizard (it is actually the 32-bit version) started by the SSDT,
I think it should be “Microsoft Access (Microsoft Jet Database Engine)”. Because the Microsoft Jet 4.0 OLE DB driver only supports Access 2003 or earlier format, it threw the error “Test connection failed because of an error in initializing provider. Unrecognized
database format 'C:\myDB.accdb'”.
In this situation, you have two approaches to avoid this issue:
Launch the SQL Server Import and Export Wizard (64-bit), and select “Save SSIS Package” to “File System” on the “Save and Run Package” page. Then, the package will be saved to a specified directory. After that, you can add this existing package to a SSIS
project. The status of the corresponding OLE DB Connection Manager should be Work Offline, or the OLE DB Source will throw an error about 32-bit driver if the Connection Manager is not in Work Offline status, you can ignore that and the package can run successfully
in SSDT as long as the project is set to run in 64-bit runtime mode.
However, for the SSDT 2012 integrated with Visual Studio 2012, the 64-bit runtime mode is disabled. In this situation, to run the package in SSDT, you have to uninstall the 64-bit Microsoft ACE 12.0 OLE DB drivers and install the 32-bit one. Here is the
download link:
http://www.microsoft.com/en-in/download/details.aspx?id=13255
Regards,
Mike Yin
TechNet Community Support

Insert Image file from java to ms access database

Are there any ways to insert image file or any files into microsoft access database and retrieve the file from the database. Guild will be helpful.Thank you.
regards
Singaravelan

The right answer? Don't do it. You should not be putting images in any database.
Better to write the image to the server's file system and add the path/link to the database instead.
%

File to MS-Access database

Hello All,
I have been trying with scenario where in File content needs to create records in MS-Access database. As it is MS-Access there would not be any specific driver installation and i configured everything as specified and required but still i am getting the error as " failed: java.sql.SQLException: No suitable driver ", my XI server is on UNIX, is it fine to have File->Access scenario with out any specific drivers? Please guide me. I have created an instance of mdb on XI server and tried to access but got the above exception.
Thanks,
Vijay Kumar T.

Vijay Kumar T.
Please refer to the following links and OSS note:
JDBC Adapter Problem
JDBC Drivers for MS Access
Note 831162 - FAQ: XI 3.0 / PI 7.0 / PI 7.1 JDBC Adapter
Also, can you post the contents of your classpath system variable?
Hope this helps.
PJ

Restoring an ms access database backup file in sql server 2005

Hello everyone.
I have an ms access database backup file.
Presently i dont have ms access database in my system.
It is high priority to access that ms access database backup file.
So, is there anyway to access that in sql server?
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.

Hello sir,
i tried to use import/export wizard to import data from an ms access backup file.
I completed it with some warning's.
Wizard has shown that 2 out of three objects(tables and views) are copied to destination database(empty database which i have created for storing this imported data).
And in that process, wizard made me to create a package.
Now how to access that package?
And my newly created database has no data.(i mean it is supposed to have 2 objects which are copied from source right?)
Sorry if my doubt looks silly i have never used ssis or import/export ever before.
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.
-- Thanks and Regards Srikar Reddy Gondesi, Trainee SQL Server Database Administrator Miracle Software systems, Inc.

[JDBC][ODBC] How to compact access database from Java ?

Hello,
I'm developping a java applcation wich is connected to an MS Access file database.
For now, I don'y compact it but it would be better.
So How can I compact an access database from Java ?
thanks :)

Hi ypiel,
Try this:
1) Download JETCOMP.exe (freeware from Microsoft);
2) Put the following code in your app (assuming your database file name is: "DB.mdb"):
try {
File current = new File("DB.mdb");
File backup = new File("BACKUP.mdb");
if (current.renameTo(backup)) {
Runtime.getRuntime().exec("jetcomp -src:BACKUP.mdb -dest:DB.mdb");
} catch (Exception e) {
System.out.println(e.getMessage());
Best regards,
YT.

Regarding File to JDBC/MS Access database

Similar Messages

Maybe you are looking for