Regarding file transfer SAP(SD)

hi everybody
I would like to know how files transfered from non SAP implementing to newly implementing SAP(SD)

Dear Shaik,
If you are not using SAP XI:
You will have to develop a custom program/LSMW to transfer the data from your legacy system to SAP system (SD Module in your case).
There are two ways by which you can achieve this.
1. Run your program/LSMW as a batch job with some frequency (Lets say daily, weekly etc).
2. Execute the program/LSMW in foreground (Manual).
If you are using SAP XI:
You will have to develop an interface to transfer data through XI from legacy system to SAP System.
Reward points if this is helpful.
Regards,
Naveen.

Similar Messages

File Transfer SAP to MQ series

Hi experts,
We are having a SAP program which creates a file abc.txt. We want to push this file from SAP to a destination which is an MQ series directly. Please lets know the steps for this. Please provide any documents if any.
Regards
Vimal

Hi,
Here are the options:-->
1. You can send the file thru FTP to MQseries destination
2. Create a RFC function module and read the data and send to MQseries destination
3. Using OPEN DATASET you read the file and write to a MQseries drive.
You need more info let me know.
a®s

.PDF file transfer(SAP XI ) along with file name to SAP R3

I would like to transfer a .PDF file along with its file name to target system.I need to have target structure like,
<Target>
 <field1>
 <Field2>
/Target>
Field1should be mapped to file name( i can do this by using dynamic configuration and a UDF).
Field 2 should me mapped to .PDF imae (.ie) i need tp pass the whole image to one target field
How can i do this.
Please suggest.

Hi as mentioned by you the structure is
<Target>
 <field1>
 <Field2>
</Target>
Field 1 Contains The dynamic File name UDF
Just make This File name which is sent Thru Source side as "Filename.PDF" to be passed to the target end
For example If the File name is XYZ
Field 1 has XYZ--
Pass The Field 2 as "XYZ.pdf" (i.e. File name Followed By .pdf as extension(Field1.pdf))

How to Transfer SAP data to perticular Worksheet in Excel file

Hi,
I have a requirenment to Transfer SAP data to Perticular WorkSheet in an Existing Excel file, i tries using EXCEL_OLE_STANDARD_DAT but this FM deletes all Existing worksheets in the Excel file and creates only one new worksheet and adds data to it.
Please Help me to solve this issue.....
Thanks
Srilatha

hello,
what kinf of data do you need to transfer?
master data
or
payroll results?
regards
stefan

How to transfer file from sap server to PDM server using open FT??

Hello Sap Guru's
I want to Trasfer a file with all supplier information from SAP server to PDM server(Thirdparty) system Using Open FT ..How can I transfer ???
Please let me know the answer??
Thanks In Advance
Preethi

Hi Preethi,
I think it is not possible to transfer a file from SAP to PDM using open FT.
Using RFCs, we can do the transfer.
Other option is the file can be downloaded into UNIX. And from there using a shellscript we can transfer the file from UNIX to PDM or if your PDM has the option to grab the file from UNIX that will also work.
Hope this helps.
Please reward if helpful.
Thanks,
Srinivas

SAP PI ftp FIle transfer one to one with the same filename

Hello all,
maybe sombody ask the same in this forum, but couldn't find any topic regarding these.
Okay:
We have a scenario which have to pick up a txt file from a folder and to deliver to another folder
outside. The file transfer itselfs isn't a problem and works propertly, but we need the same file-
name for the outgoing file. Unfortunaltey we have huge different filenames..
So, my question would be, what for possiblities we have to sure, that if we can deliver the
file which the same filename as we have in the orginal (source) filefolder.
e.g. file named in source called TEST.123 in the destination should be also TEST.123.
The next file called TEST123.abc should be also in the destination TEST123.abc.
Thanks

Hi friends.
I don't know about if you need still any help. But i think it will be useful for another people who have encountered that problem and looking for the solution.
The solution is pretty simple for case if you are going to some file by scenario FTP - to - FTP without interface mapping. I was able to create simple example ant put it on my site to let you use the portable short instruction with screen shots and highlighted marks that help you understand it more clear. Indeed you don't need any udf if you wish to repeat that example in your real scenario. Link is HERE
Shortly you have to do the next:
1) for the sender adapter in tab "Advanced" switch on the check-box "Set Adapter Specific Attributes" and check that "File name" is switched on as well.
2) for the receiver adapter you have to repeat step 1 as well. Plus you have to change setting on the tab "Processing". On that tab you need to change "File Construction Mode" into "Create" and than you have to switch on the check box named as "Overwrite Existing File".
That's it.
Thank you, i hope that is help.
Sincerely, LukCAD.

Regarding uploading .wri files in sap system

Hi Experts,
I want to know which all file types can be uploaded in sap system. Can we upload .wri file in sap system ?
Waiting for quick replies.
Thanks in advance,
Akash

Hi Experts,
I want to know which all file types can be uploaded in sap system. Can we upload .wri file in sap system ?
Waiting for quick replies.
Thanks in advance,
Akash

Regarding the nomenclature for include files in SAP

Hi Group,
I am presently enhancing a tool for the upgrade thing .The tool is used to derive all the effected objects,so, for that i need to know the nomenclature for include files in SAP.e,g all the include files for table maintenance generator starts with LSVIM.so, we don't need to analyse that include files,so in the similar fashion i need to know nomenclature for include files....
Thanks,
Ajitabh Aggarwal

Hi Group,
Basically i am working on developing an upgrade tool from 4.6/4.7 to Ecc 5.0/6.0,so for that i need certain information on include files.Basically i need to collect the affected zobjects whic i need to modify,So,for that i need to get the FUGR,FMs and includes which need to be corrected.e.g all deque and enque function modules are irrerelevant and similary includes starting with LSVIM and those that don't have function odules attached to them are for screen maintenance of tables.So, i need certain on inputs on that end.if u have anything,please do tell me.
Thanks in Advance.
Ajitabh Aggarwal

How to store multiple files from SAp in to Application server?

Hi Guys,
 Can anybody tell me how to store multiple files from SAP into Application server.in my application i have to get the data from SAP tables BSEG , BKPF , BSAK and BSIK that to daily i have to do.
 Any Logic or Code for how to do is welcomed.
 plz help me urgently.
Thanks,
Gopi

Hi,
directories creates basis. If you have task to store data in application server you already should have information into which folder you have to do it. If you don't have this information because it is just for example training for next task then you can use your personal folder into which you have access. To get list of all available folders please look at attached code and form get_directories (you get the list of folders you see in transaction AL11). But don't forget: If you are using open dataset you have to have rights to access application folder!
Here you are code which I use to upload text files from local disc into application folder
Regards,
Karol
*& Report FILE_PC_TO_SAP
REPORT FILE_PC_TO_SAP.
DATA: BEGIN OF searchpoints OCCURS 100,
 DIRNAME(200) TYPE c, " name of directory.
 sp_name(100) TYPE c," name of entry. (may end with *)
 END OF searchpoints.
DATA: BEGIN OF isearchpoints OCCURS 10,
 dirname(75) TYPE c, " name of directory.
 aliass(75) TYPE c, " alias for directory.
 svrname(75) TYPE c, " svr where directory is availabl
 sp_name(75) TYPE c, " name of entry. (may end with *)
 sp_cs(10) TYPE c, " ContainsString pattern for name
 END OF isearchpoints.
data: l_file type filetable.
data: l_rc type i.
data: itab type TABLE OF string.
data: g_tmp_file_path type rlgrap-filename.
data: wa_itab type string.
data: h_destin(100) type c.
data: dat type string.
INITIALIZATION.
perform get_directories.
START-OF-SELECTION.
parameters: in_file type string OBLIGATORY LOWER CASE.
parameters: destin(100) type c OBLIGATORY LOWER CASE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
 FILENAME = in_file
 "FILETYPE = 'BIN'
 FILETYPE = 'ASC'
 HAS_FIELD_SEPARATOR = ' '
 HEADER_LENGTH = 0
 READ_BY_LINE = 'X'
 DAT_MODE = ' '
TABLES
 DATA_TAB = itab
EXCEPTIONS
 FILE_OPEN_ERROR = 1
 FILE_READ_ERROR = 2
 NO_BATCH = 3
 GUI_REFUSE_FILETRANSFER = 4
 INVALID_TYPE = 5
 NO_AUTHORITY = 6
 UNKNOWN_ERROR = 7
 BAD_DATA_FORMAT = 8
 HEADER_NOT_ALLOWED = 9
 SEPARATOR_NOT_ALLOWED = 10
 HEADER_TOO_LONG = 11
 UNKNOWN_DP_ERROR = 12
 ACCESS_DENIED = 13
 DP_OUT_OF_MEMORY = 14
 DISK_FULL = 15
 DP_TIMEOUT = 16
 OTHERS = 17.
IF sy-SUBRC <> 0.
write: / 'Error during loading input file!'.
ENDIF.
if h_destin is INITIAL.
h_destin = in_file.
endif.
CONCATENATE destin h_destin into dat SEPARATED BY '/'.
*TRANSLATE dat TO UPPER CASE.
OPEN DATASET dat FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-SUBRC = 0.
loop at itab into wa_itab.
 TRANSFER: wa_itab TO dat.
endloop.
CLOSE DATASET dat.
write: / 'File uploaded!'.
ELSE.
write: / 'Not possible to open dataset'.
ENDIF.
at selection-screen on value-request for in_file.
perform select_input_file_name.
loop at l_file into g_tmp_file_path.
 move g_tmp_file_path to in_file.
 h_destin = ''.
 SPLIT g_tmp_file_path at '\' into table itab.
 loop at itab into g_tmp_file_path.
 h_destin = g_tmp_file_path.
 endloop.
endloop.
at selection-screen on value-request for destin.
DATA: lt_dfies TYPE TABLE OF dfies.
DATA: lwa_dfies TYPE dfies.
CALL FUNCTION 'DDIF_FIELDINFO_GET'
 EXPORTING
 tabname = '/BI0/PCO_AREA'
 lfieldname = 'CO_AREA'
 IMPORTING
 dfies_wa = lwa_dfies.
lwa_dfies-tabname = 'searchpoints'.
lwa_dfies-REPTEXT = 'Destination directory'.
lwa_dfies-LENG = 100.
lwa_dfies-INTLEN = 100.
lwa_dfies-OUTPUTLEN = 100.
lwa_dfies-fieldname = 'SP_NAME'.
APPEND lwa_dfies TO lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
 EXPORTING
 RETFIELD = 'SP_NAME'
 DYNPPROG = SY-REPID
 DYNPNR = SY-DYNNR
 DYNPROFIELD = 'destin'
 VALUE_ORG = 'S'
 TABLES
 VALUE_TAB = searchpoints
 FIELD_TAB = lt_dfies
 EXCEPTIONS
 PARAMETER_ERROR = 1
 NO_VALUES_FOUND = 2
 OTHERS = 3.
*& Form select_input_file_name
* text
form select_input_file_name.
* call function 'F4_FILENAME'
* exporting
* program_name = sy-repid
* dynpro_number = sy-dynnr
* field_name = 'PATH'
* importing
* file_name = g_tmp_file_path.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
EXPORTING
WINDOW_TITLE = 'Please choose a file'
"default_extension = '*.TXT'
"default_filename = 'C:\*.txt'
initial_directory = 'C:\'
file_filter = '*.*'
CHANGING
FILE_TABLE = l_file
RC = l_RC
EXCEPTIONS
FILE_OPEN_DIALOG_FAILED = 1
CNTL_ERROR = 2
ERROR_NO_GUI = 3
NOT_SUPPORTED_BY_GUI = 4
OTHERS = 5.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endform. "select_input_file_name
*& Form WRITE_DB_HOME
* Write DB home directory
* no parameters
FORM write_db_home.
CASE sy-dbsys(3).
 WHEN 'ORA'.
 CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ORAHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ORAHOME', 30 searchpoints-dirname.
 MOVE: 'DIR_ORAHOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'ADA'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'DBROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_ADA_DBROOT', 30 searchpoints-dirname.
 MOVE: 'DIR_ADA_DBROOT' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 WHEN 'INF'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INFORMIXDIR'
 ID 'VALUE' FIELD searchpoints-dirname.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_INF_INFORMIXDIR', 30 searchpoints-dirname.
 MOVE: 'DIR_INF_INFORMIXDIR' TO searchpoints-sp_name.
 APPEND searchpoints..
*--- C5056155 End of ALV -------------------------------*
 WHEN 'DB6'.
 CALL 'C_GETENV' ID 'NAME' FIELD 'INSTHOME'
 ID 'VALUE' FIELD searchpoints-dirname.
 IF sy-subrc = 0.
*--- C5056155 Start of ALV -------------------------------*
* PERFORM flip_flop(rsora000) USING cflag.
* WRITE: / 'DIR_DB2_HOME', 30 searchpoints-dirname.
 MOVE: 'DIR_DB2_HOME' TO searchpoints-sp_name.
 APPEND searchpoints.
*--- C5056155 End of ALV -------------------------------*
 ELSE.
 EXIT.
 ENDIF.
 WHEN OTHERS.
 EXIT.
ENDCASE.
ENDFORM. " WRITE_DB_HOME
FORM get_directories.
* get the name and aliases of ALL userdefined directories
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = sy-uname.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
SELECT * FROM user_dir INTO isearchpoints
 WHERE svrname = 'all'.
 MOVE isearchpoints-dirname to searchpoints-dirname.
 MOVE isearchpoints-aliass to searchpoints-sp_name.
 APPEND searchpoints.
ENDSELECT.
* Get DB home
IF sy-dbsys(3) = 'ADA'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ATRA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ATRA' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_BINARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_BINARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory $DIR_CCMS
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CCMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CCMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_CT_RUN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_CT_RUN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DATA'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DATA' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'DB6'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_DBMS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_DBMS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXECUTABLE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXECUTABLE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_EXE_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_EXE_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GEN_ROOT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GEN_ROOT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GLOBAL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GLOBAL' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_EXE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_EXE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_GRAPH_LIB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_GRAPH_LIB' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_HOME'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_HOME' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'INF'.
 PERFORM write_db_home.
ENDIF.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTALL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTALL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_INSTANCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_INSTANCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LIBRARY'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LIBRARY' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_LOGGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_LOGGING' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the files written by the memory inspector
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_MEMORY_INSPECTOR'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_MEMORY_INSPECTOR' TO searchpoints-sp_name.
APPEND searchpoints.
* Get DB home
IF sy-dbsys(3) = 'ORA'.
 PERFORM write_db_home.
ENDIF.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PAGING'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PAGING' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PUT'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PUT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PERF'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PERF' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROFILE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROFILE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_PROTOKOLLS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_PROTOKOLLS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_REORG'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_REORG' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_ROLL'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_ROLL' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_RSYN'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_RSYN' TO searchpoints-sp_name.
APPEND searchpoints.
* calculate directory for saphostagent (no sapparam available...)
IF ( sy-opsys(3) = 'WIN' ) OR ( sy-opsys(3) = 'Win' ).
 DATA: windir_path(64), programfiles_path(64).
* hoping that ProgramFiles is set in service user environment
 CALL 'C_GETENV' ID 'NAME' FIELD 'ProgramFiles'
 ID 'VALUE' FIELD programfiles_path.
 IF programfiles_path IS INITIAL.
* %ProgramFiles% not available. guess from windir
 CALL 'C_GETENV' ID 'NAME' FIELD 'windir'
 ID 'VALUE' FIELD windir_path.
* e.g. S:\WINDOWS ==> S:\Program Files
 CONCATENATE windir_path(3) 'Program Files' INTO programfiles_path.
 ENDIF.
 CONCATENATE programfiles_path '\SAP\hostctrl'
 INTO searchpoints-dirname.
ELSE.
* on UNIX, the path is hard coded
 searchpoints-dirname = '/usr/sap/hostctrl'.
ENDIF.
MOVE: 'DIR_SAPHOSTAGENT' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SAPUSERS'
 ID 'VALUE' FIELD searchpoints-dirname.
IF searchpoints-dirname = '.'.
 IF sy-opsys = 'Windows NT'.
 searchpoints-dirname = '.\'.
 ELSE.
 searchpoints-dirname = './'.
 ENDIF.
ENDIF.
MOVE: 'DIR_SAPUSERS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SETUPS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SETUPS' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SORTTMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SORTTMP' TO searchpoints-sp_name.
APPEND searchpoints.
*get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_SOURCE'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_SOURCE' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TEMP'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TEMP' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRANS'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRANS' TO searchpoints-sp_name.
APPEND searchpoints.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRFILES'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRFILES' TO searchpoints-sp_name.
APPEND searchpoints.
* get name of directory with the error files
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'DIR_TRSUB'
 ID 'VALUE' FIELD searchpoints-dirname.
MOVE: 'DIR_TRSUB' TO searchpoints-sp_name.
APPEND searchpoints.
* get the name of the current server.
CALL 'C_SAPGPARAM' ID 'NAME' FIELD 'rdisp/myname'
 ID 'VALUE' FIELD searchpoints-dirname.
data: h_ind type i.
LOOP AT searchpoints.
 h_ind = sy-tabix.
 IF searchpoints-sp_name IS INITIAL.
 DELETE searchpoints INDEX h_ind.
 ENDIF.
ENDLOOP.
ENDFORM.

Error no. 4 in SAPGUI during graphic call or file transfer.

Hi,
In the landscape there are still 46b sap version, i have some functional queries that when i executes go to the sap graphic screen and it throws with no output. I understand that that it works in ECC version but not for 46b.
This issue is related to SAPGUI, as i have the latest sapgui installed 710 that works well for ECC.
But if i input the parameter in sap 46b system , and execute to get the graphic chart i get this:
The Generation of Graphs for Stock Movements in the MC49 Transaction.
When you call a hierarchy graphic, the following error messages are displayed
1. 'Too much data in a table or too many tables defined
2. E4: error writing to XC pipe: child #1 ( id: STAT ); reclen12
3. Error no. 4 in SAPGUI during graphic call or file transfer.
I have also look in to note 316232, 361222, 96885. for this but this says to upgrade the sapgui,which is already in.
What is the solution for this.
Regards,
Chetan.

Take a look at this thread. This may provide you some guidance as it appears that Error has been encountered before.
[Link Here|Error no. 4 in SAPGUI with Graphics call or file transfer;
Regards,
Zecher

Downloading a file from SAP (tcode FDTA) onto the disk drive of the server

Hi,
We are using the transaction FDTA to download a file to the server. This server is the same one on which the SAP system is hosted the download we have to specify the destination path as
server1\folder1\filename.txt.
The file is downloaded successfully every time.But we need to know which userID was used by SAP to download the file. For this we have switched on the Windows feature of Auditing. This gives us the username which has created the file on the drive.
Here it gets complicated, as each time we see a different username. Sometimes it is the user using which we logged on to the windows OS (terminal server from where we fire the sap logon pad) and other times it shows the user as sidadm.
We need to know how this file transfer process takes place or if there is someway we can ensure that only one userID is always associated with the file download.
Regards,
Rohan.

Hi,
Thank you Markus and BAIGSA. But the user that i see associated with the file (we get this information via Windows auditing) is the user which is used to login to the terminal server.
Now to explain in detail we first login to the terminal server with domain user ID (userA for e.g.). From there we are able to access the SAP R/3 as well as the OS of the SAP systems. So after I login to this terminal server I open the SAP logon pad and logon to the SAP system from where I fire the tcode FDTA mentioned above.
It seems the user I used to logon to the terminal server (userA) is associated with the file (as seen in Windows auditing) and not the sidadm or the SAPserviceSID user.
Is this happening only because I am using a terminal server to hop onto the SAP system?
Regards,
Rohan.

Getting error in file transfer from one system to another system

Hi All
One of my client (User) wants to transfer his file from SAP R/3 System SAP XI system. He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System). When user execute the program he is getting error "File Transfer Failed due to Network chk with Admin"
I checked with Network team but they said it is okay from their side. We also check for authorization but there is no issue regarding authorization.
Name of File Path of Aplication Server, XI destinaion and XI directory entered by user is correct.
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Please help me to resolve this problem. I any detail require I will provide the same.

Guruprasad Wrote:
He is using a customize t-code ZFIR0325 (Trial balance report transfer to Hyperian System).
We also put authorization trace in XI System to RFC User (In file transfer from one system to another system this RFC User is geeing Used) but no authorization issue was found.
Firstly, no one in the community can answer on how a custom transcation code and a program associated with it behaves.
If there are no authorization issues in the system, you have to look at the exact error message. Look if your XI system is allowed to receive files from the SAP system.
Unfortunately, you should do some more home work before putting your question here. If everything is fine and configured correctly, then the issue might be with the program.
Regards,
Raghu

Urgent: File transfer to sever

Dear Guru,
I have some question. I am writing a program to upload excel file from PC to SAP. I use abap function to get excel file from PC and store data in an internal table. I am then use function file transfer (open dataset and close dataset) to transfer that internal table to server as a text file. However, everything is going smoothly from a begining until the end. The message is displayed to me as file xxx has been transfered to sever xx. Unfortunately, when I access to sever, I cannot find that text file. Anything wrong with my coding? Please help me!! I will reward you. thank you very much.
Best Regard
This is my code.
OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT MESSAGE MSG_TEXT.
IF SY-SUBRC NE 0.
 WRITE: 'FILE CANNOT BE OPENED FOR REASON:', MSG_TEXT.
ELSE.
 LOOP AT ITAB.
 TRANSFER ITAB-COL1 TO FILENAME.
 TRANSFER ITAB-COL2 TO FILENAME.
 TRANSFER ITAB-COL3 TO FILENAME.
 TRANSFER ITAB-COL4 TO FILENAME.
 TRANSFER ITAB-COL5 TO FILENAME.
 TRANSFER ITAB-COL6 TO FILENAME.
 TRANSFER ITAB-COL7 TO FILENAME.
 TRANSFER ITAB-COL8 TO FILENAME.
 TRANSFER ITAB-COL9 TO FILENAME.
 TRANSFER ITAB-COL10 TO FILENAME.
 TRANSFER ITAB-COL11 TO FILENAME.
 TRANSFER ITAB-COL12 TO FILENAME.
 TRANSFER ITAB-COL13 TO FILENAME.
 TRANSFER ITAB-COL14 TO FILENAME.
 ENDLOOP.
 MESSAGE I000(38) WITH FILENAME ':TRANSFERRED SUCCESSFULLY'.
 CLOSE DATASET FILENAME.
ENDIF.

Hi ,
Coule you check whether data is there in your internal table or not , because i created a sample program and it worked file.
Also check whether you have access to modify the file ,i.e. check if the file is read only , try writing to a new file .
Do revert back with the observations.
Regards
Arun
Code which i used for testing is as below
data : filename(20) value '/usr/arun.txt'.
data : begin of it_1 occurs 0 ,
 matnr type matnr ,
 labst type labst ,
 end of it_1.
select matnr labst
into table it_1
up to 10 rows
from mard.
data : begin of it_2 occurs 0 ,
 matnr type string ,
 labst type string ,
 end of it_2.
OPEN DATASET FILENAME FOR OUTPUT IN TEXT MODE .
loop at it_1.
it_2-matnr = it_1-matnr.
it_2-labst = it_1-labst.
TRANSFER IT_2-matnr TO FILENAME.
TRANSFER IT_2-labst TO FILENAME.
endloop.

AutoCAD files using SAP XI

Dear All,
1. Is it possible to transfer AutoCAD files using SAP XI?
2. Will the file adapter serve the purpose?
3. If yes, are there any performance issues that need to be looked at in transferring AutoCAD files?
Thanks and Regards,
Ashwin

Hi Ashwin,
It is possible to process CAD files.
It is possible with File adapters only. the performance could be analysed based on the size of files as well as for 2-D drawings in Auto CAD it will take less volume of file size but normally 3-D drawings consumes lot of space.
there is one similar scenario to process image files in below link. This will give you step by step Idea about it.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10dd67dd-a42b-2a10-2785-91c40ee56c0b
To open a DWG file in CDESK u need to have the Autocad s/w installed on ur system this is because when u tell SAP to open any type of file first it saves its original copy in a temp folder and to store any dam type of a file u need to have the application that supports that type
of file
there is some s/w called EI viewer I dont know much functionality of it but i guess its required for the drawings involving 3D view
thanks
Swarup
Edited by: Swarup Sawant on Feb 4, 2008 10:08 AM

Where can I find the jar file for File Transfer Service API

Hi all ,
I wish to use the File Transfer Service API in my application . Could anyone please tell me as to where I could find these class files ??
import com.sap.engine.services.file.RemoteFile;
import com.sap.engine.services.file.FileTransfer;
import com.sap.engine.services.deploy.DeployService;
import com.sap.engine.services.deploy.container.WarningException;
Thanks in advance ,
Tahzeeb

Hi,
you can find these jar files in the installation directory of NWDS:
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comcom.sap.engine.deploy.online_compgendefaultpublicdefaultlibjavasapj2eenginedeploy.jar
...SAPJDTeclipsepluginscom.sap.tc.apcompSAP-JEEDCssap.comfile_compgendefaultpublicdefaultlibjavafile.jar
Regards
Sebastian

Regarding file transfer SAP(SD)

Similar Messages

Maybe you are looking for